From: Balakrishna Godavarthi <bgodavar@codeaurora.org>
To: Matthias Kaehlcke <mka@chromium.org>
Cc: marcel@holtmann.org, johan.hedberg@gmail.com,
linux-kernel@vger.kernel.org, linux-bluetooth@vger.kernel.org,
hemantg@codeaurora.org, linux-arm-msm@vger.kernel.org
Subject: Re: [PATCH v1] Bluetooth: hci_qca: Add helper to set device address.
Date: Wed, 31 Oct 2018 19:06:49 +0530 [thread overview]
Message-ID: <e2785ffd2c5c614ba92d170afef3ea3b@codeaurora.org> (raw)
In-Reply-To: <20181026185314.GD22824@google.com>
Hi Matthias,
On 2018-10-27 00:23, Matthias Kaehlcke wrote:
> On Fri, Oct 26, 2018 at 07:34:50PM +0530, Balakrishna Godavarthi wrote:
>> This patch add qca_set_device_bdaddr() to set the device
>> address for latest Qualcomm Bluetooth chipset wcn3990 and above.
>>
>> Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
>> ---
>> drivers/bluetooth/btqca.c | 21 +++++++++++++++++++++
>> drivers/bluetooth/btqca.h | 9 ++++++++-
>> drivers/bluetooth/hci_qca.c | 5 ++++-
>> 3 files changed, 33 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
>> index ec9e03a6b778..132dc6ceb174 100644
>> --- a/drivers/bluetooth/btqca.c
>> +++ b/drivers/bluetooth/btqca.c
>> @@ -391,6 +391,27 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t
>> baudrate,
>> }
>> EXPORT_SYMBOL_GPL(qca_uart_setup);
>>
>> +int qca_set_device_bdaddr(struct hci_dev *hdev, const bdaddr_t
>> *bdaddr)
>
> nit: just qca_set_bdaddr() ? That would be consistent with
> qca_set_bdaddr_rome() and ->set_bdaddr().
>
[Bala]: will update.
>> +{
>> + struct sk_buff *skb;
>> + u8 cmd[6];
>
> nit: this doesn't really contain the command (which is
> EDL_WRITE_BD_ADDR_OPCODE). Name it 'buf', 'ba' or similar?
>
[Bala]: will update with ba.
> re-nit: in the memcpy below 'sizeof(bdaddr_t)' is used, do the same in
> the declaration?
>
>> + int err;
>> +
>> + memcpy(cmd, bdaddr, sizeof(bdaddr_t));
>> + skb = __hci_cmd_sync_ev(hdev, EDL_WRITE_BD_ADDR_OPCODE, sizeof(cmd),
>> + cmd, HCI_EV_VENDOR, HCI_INIT_TIMEOUT);
>> + if (IS_ERR(skb)) {
>> + err = PTR_ERR(skb);
>> + bt_dev_err(hdev, "QCA Change address cmd failed (%d)", err);
>> + return err;
>> + }
>> +
>> + kfree_skb(skb);
>> +
>> + return 0;
>> +}
>> +EXPORT_SYMBOL_GPL(qca_set_device_bdaddr);
>> +
>> MODULE_AUTHOR("Ben Young Tae Kim <ytkim@qca.qualcomm.com>");
>> MODULE_DESCRIPTION("Bluetooth support for Qualcomm Atheros family ver
>> " VERSION);
>> MODULE_VERSION(VERSION);
>> diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
>> index 0c01f375fe83..8771fc2b193d 100644
>> --- a/drivers/bluetooth/btqca.h
>> +++ b/drivers/bluetooth/btqca.h
>> @@ -20,6 +20,7 @@
>>
>> #define EDL_PATCH_CMD_OPCODE (0xFC00)
>> #define EDL_NVM_ACCESS_OPCODE (0xFC0B)
>> +#define EDL_WRITE_BD_ADDR_OPCODE (0xFC14)
>> #define EDL_PATCH_CMD_LEN (1)
>> #define EDL_PATCH_VER_REQ_CMD (0x19)
>> #define EDL_PATCH_TLV_REQ_CMD (0x1E)
>> @@ -140,7 +141,7 @@ int qca_set_bdaddr_rome(struct hci_dev *hdev,
>> const bdaddr_t *bdaddr);
>> int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
>> enum qca_btsoc_type soc_type, u32 soc_ver);
>> int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version);
>> -
>> +int qca_set_device_bdaddr(struct hci_dev *hdev, const bdaddr_t
>> *bdaddr);
>> #else
>>
>> static inline int qca_set_bdaddr_rome(struct hci_dev *hdev, const
>> bdaddr_t *bdaddr)
>> @@ -159,4 +160,10 @@ static inline int qca_read_soc_version(struct
>> hci_dev *hdev, u32 *soc_version)
>> return -EOPNOTSUPP;
>> }
>>
>> +static inline int qca_set_device_bdaddr(struct hci_dev *hdev,
>> + const bdaddr_t *bdaddr)
>> +{
>> + return -EOPNOTSUPP;
>> +}
>> +
>> #endif
>> diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
>> index f036c8f98ea3..f18d9f5a7782 100644
>> --- a/drivers/bluetooth/hci_qca.c
>> +++ b/drivers/bluetooth/hci_qca.c
>> @@ -1241,7 +1241,10 @@ static int qca_setup(struct hci_uart *hu)
>> }
>>
>> /* Setup bdaddr */
>> - hu->hdev->set_bdaddr = qca_set_bdaddr_rome;
>> + if (qcadev->btsoc_type == QCA_WCN3990)
>> + hu->hdev->set_bdaddr = qca_set_device_bdaddr;
>> + else
>> + hu->hdev->set_bdaddr = qca_set_bdaddr_rome;
>>
>> return ret;
>> }
>
> Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
> Tested-by: Matthias Kaehlcke <mka@chromium.org>
--
Regards
Balakrishna.
prev parent reply other threads:[~2018-10-31 13:36 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-26 14:04 [PATCH v1] Bluetooth: hci_qca: Add helper to set device address Balakrishna Godavarthi
2018-10-26 18:53 ` Matthias Kaehlcke
2018-10-31 13:36 ` Balakrishna Godavarthi [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e2785ffd2c5c614ba92d170afef3ea3b@codeaurora.org \
--to=bgodavar@codeaurora.org \
--cc=hemantg@codeaurora.org \
--cc=johan.hedberg@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marcel@holtmann.org \
--cc=mka@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).