From: "Ardelean, Alexandru" <alexandru.Ardelean@analog.com>
To: "Popa, Stefan Serban" <StefanSerban.Popa@analog.com>,
"lucasseikioshiro@gmail.com" <lucasseikioshiro@gmail.com>,
"mark.rutland@arm.com" <mark.rutland@arm.com>,
"lars@metafoo.de" <lars@metafoo.de>,
"jic23@kernel.org" <jic23@kernel.org>,
"knaack.h@gmx.de" <knaack.h@gmx.de>,
"pmeerw@pmeerw.net" <pmeerw@pmeerw.net>,
"robh+dt@kernel.org" <robh+dt@kernel.org>,
"ardeleanalex@gmail.com" <ardeleanalex@gmail.com>
Cc: "marcelo.schmitt1@gmail.com" <marcelo.schmitt1@gmail.com>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"linux-iio@vger.kernel.org" <linux-iio@vger.kernel.org>,
"matheus.bernardino@usp.br" <matheus.bernardino@usp.br>,
"rodrigorsdc@gmail.com" <rodrigorsdc@gmail.com>
Subject: Re: [PATCH v2] dt-bindings: iio: accel: adxl372: switch to YAML bindings
Date: Thu, 6 Jun 2019 08:49:53 +0000 [thread overview]
Message-ID: <e30a3c629f0d355c5131420437c031a522caea01.camel@analog.com> (raw)
In-Reply-To: <20190531201114.2973-1-lucasseikioshiro@gmail.com>
On Fri, 2019-05-31 at 17:11 -0300, Lucas Oshiro wrote:
> [External]
>
>
> Convert the old device tree documentation to yaml format.
>
> Signed-off-by: Lucas Oshiro <lucasseikioshiro@gmail.com>
> Signed-off-by: Rodrigo Ribeiro <rodrigorsdc@gmail.com>
> Co-developed-by: Rodrigo Ribeiro <rodrigorsdc@gmail.com>
> Reviewed-by: Matheus Tavares <matheus.bernardino@usp.br>
> Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
> ---
> V2:
> - Update MAINTAINERS file
> - Remove description field for reg and interrupts properties
> - Add interrupts as a required property
>
> .../bindings/iio/accel/adi,adxl372.yaml | 63 +++++++++++++++++++
> .../devicetree/bindings/iio/accel/adxl372.txt | 33 ----------
> MAINTAINERS | 2 +-
> 3 files changed, 64 insertions(+), 34 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
> delete mode 100644 Documentation/devicetree/bindings/iio/accel/adxl372.txt
>
> diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
> b/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
> new file mode 100644
> index 000000000000..a7fafb9bf5c6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
> @@ -0,0 +1,63 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/accelerometers/adi,adxl372.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Analog Devices ADXL372 3-Axis, +/-(200g) Digital Accelerometer
> +
> +maintainers:
> + - Stefan Popa <stefan.popa@analog.com>
> +
> +description: |
> + Analog Devices ADXL372 3-Axis, +/-(200g) Digital Accelerometer that supports
> + both I2C & SPI interfaces
> + https://www.analog.com/en/products/adxl372.html
> +
> +properties:
> + compatible:
> + enum:
> + - adi,adxl372
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> +
> +examples:
> + - |
> + #include <dt-bindings/gpio/gpio.h>
> + #include <dt-bindings/interrupt-controller/irq.h>
> + i2c0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + /* Example for a I2C device node */
> + accelerometer@53 {
> + compatible = "adi,adxl372";
> + reg = <0x53>;
> + interrupt-parent = <&gpio>;
> + interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
> + };
> + };
> + - |
> + #include <dt-bindings/gpio/gpio.h>
> + #include <dt-bindings/interrupt-controller/irq.h>
> + spi0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + accelerometer@0 {
> + compatible = "adi,adxl372";
> + reg = <0>;
> + spi-max-frequency = <1000000>;
> + interrupt-parent = <&gpio>;
> + interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
> + };
> + };
> diff --git a/Documentation/devicetree/bindings/iio/accel/adxl372.txt
> b/Documentation/devicetree/bindings/iio/accel/adxl372.txt
> deleted file mode 100644
> index a289964756a7..000000000000
> --- a/Documentation/devicetree/bindings/iio/accel/adxl372.txt
> +++ /dev/null
> @@ -1,33 +0,0 @@
> -Analog Devices ADXL372 3-Axis, +/-(200g) Digital Accelerometer
> -
> -http://www.analog.com/media/en/technical-documentation/data-sheets/adxl372.pdf
> -
> -Required properties:
> - - compatible : should be "adi,adxl372"
> - - reg: the I2C address or SPI chip select number for the device
> -
> -Required properties for SPI bus usage:
> - - spi-max-frequency: Max SPI frequency to use
> -
> -Optional properties:
> - - interrupts: interrupt mapping for IRQ as documented in
> - Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
> -
> -Example for a I2C device node:
> -
> - accelerometer@53 {
> - compatible = "adi,adxl372";
> - reg = <0x53>;
> - interrupt-parent = <&gpio>;
> - interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
> - };
> -
> -Example for a SPI device node:
> -
> - accelerometer@0 {
> - compatible = "adi,adxl372";
> - reg = <0>;
> - spi-max-frequency = <1000000>;
> - interrupt-parent = <&gpio>;
> - interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
> - };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 43a9cebb2c19..06cca7cd9627 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -559,7 +559,7 @@ S: Supported
> F: drivers/iio/accel/adxl372.c
> F: drivers/iio/accel/adxl372_spi.c
> F: drivers/iio/accel/adxl372_i2c.c
> -F: Documentation/devicetree/bindings/iio/accel/adxl372.txt
> +F: Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
>
> AF9013 MEDIA DRIVER
> M: Antti Palosaari <crope@iki.fi>
> --
> 2.21.0
>
next prev parent reply other threads:[~2019-06-06 8:50 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-31 20:11 [PATCH v2] dt-bindings: iio: accel: adxl372: switch to YAML bindings Lucas Oshiro
2019-06-06 8:49 ` Ardelean, Alexandru [this message]
2019-06-08 13:53 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e30a3c629f0d355c5131420437c031a522caea01.camel@analog.com \
--to=alexandru.ardelean@analog.com \
--cc=StefanSerban.Popa@analog.com \
--cc=ardeleanalex@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=jic23@kernel.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lucasseikioshiro@gmail.com \
--cc=marcelo.schmitt1@gmail.com \
--cc=mark.rutland@arm.com \
--cc=matheus.bernardino@usp.br \
--cc=pmeerw@pmeerw.net \
--cc=robh+dt@kernel.org \
--cc=rodrigorsdc@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).