From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 73B64C4332F for ; Wed, 29 Sep 2021 03:17:30 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 5CF0961352 for ; Wed, 29 Sep 2021 03:17:30 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S243966AbhI2DTJ (ORCPT ); Tue, 28 Sep 2021 23:19:09 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:59768 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S243944AbhI2DTH (ORCPT ); Tue, 28 Sep 2021 23:19:07 -0400 Received: from mail-pl1-x62b.google.com (mail-pl1-x62b.google.com [IPv6:2607:f8b0:4864:20::62b]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 07CC1C061745; Tue, 28 Sep 2021 20:17:27 -0700 (PDT) Received: by mail-pl1-x62b.google.com with SMTP id x8so542234plv.8; Tue, 28 Sep 2021 20:17:27 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20210112; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=TDIe+6SzlRBeAk6I9k2b0FY8DIbSjAdiy7hAihmXRtA=; b=gPkJ/ezX25B76Kslyr/E8CGjV3awtQstvtTmxzkPgIOOgz4IHs+OO3oi3XR652AHQW 06pMtoicrVSgKCdzNpzZEekz3GmdrHKj3SC1bUrSGub05P3q+9XzjxY3A4mfP0gz1PFA HN5pX+ls1sBwDO2GjyfAVPmOXHO2PRbtXSDozHjs2TbyMBhtzI+H5bP8bjhuV/7VGpKp LSP+nEm+FqpJ8tI7F6xQtSqUrsAWSW4pZEA6+FBQXFUYspRogtYn+sMCj2qh94odrp2u hA1y3smajwVrcAnaYBU/8sAjKeDB2d9Df7HoZBLbVedv+gSwSilRTrriyxrwhMZPGcHJ wOXw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=TDIe+6SzlRBeAk6I9k2b0FY8DIbSjAdiy7hAihmXRtA=; b=sfs91XoIMqEgEosm9HlO86fF4xKGy7HDuxGVJkrifn2l3juOxopYRaNjnGMXdXgdvf bkp7Z/9ORFVCIZeNZbq9aimw03coCewEUegchbWmq07h6TvcsI94xqaFP0rycwoNxuz6 zo3X3sqWiE6pJI4wQ8p9gz0H3k08u9UnSy/Iruh6Kp59Sk9uI2lyhtxD9IPZeFCAzULT yAJSyN/xMMXjWjc9mJ4RTJa1TPySL/e2MmCh4fH9b3nrPy6UHoB5kcWIZBLvv8KcqQbB jgg2zFlq0LF8sA6piXVqLbmIv1I3y5+t2xO9AZqStgCCtv3ugSzVluWcfeElXwKpBk52 pJuQ== X-Gm-Message-State: AOAM530Z1SxYUFT4OjWwgywWgPwjgIkzVOaab1Cb2/3GEdmBLblESsYa NII8x7sEeZopq6zHtlSccPs= X-Google-Smtp-Source: ABdhPJzIPYLEGIGj7rLahMd9l3sNYDcVVvDVWLECWppA6wYFaT3WKagrmvqhMz0B9hPIALvhHQ+zqw== X-Received: by 2002:a17:90a:c89:: with SMTP id v9mr3673935pja.71.1632885446541; Tue, 28 Sep 2021 20:17:26 -0700 (PDT) Received: from localhost.localdomain ([156.146.35.76]) by smtp.gmail.com with ESMTPSA id 65sm464203pfv.210.2021.09.28.20.17.20 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 28 Sep 2021 20:17:26 -0700 (PDT) From: William Breathitt Gray To: jic23@kernel.org Cc: linux-stm32@st-md-mailman.stormreply.com, kernel@pengutronix.de, a.fatoum@pengutronix.de, kamel.bouhara@bootlin.com, gwendal@chromium.org, alexandre.belloni@bootlin.com, david@lechnology.com, linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, syednwaris@gmail.com, patrick.havelange@essensium.com, fabrice.gasnier@st.com, mcoquelin.stm32@gmail.com, alexandre.torgue@st.com, o.rempel@pengutronix.de, jarkko.nikula@linux.intel.com, William Breathitt Gray Subject: [PATCH v17 9/9] counter: 104-quad-8: Add IRQ support for the ACCES 104-QUAD-8 Date: Wed, 29 Sep 2021 12:16:06 +0900 Message-Id: X-Mailer: git-send-email 2.33.0 In-Reply-To: References: MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org The LSI/CSI LS7266R1 chip provides programmable output via the FLG pins. When interrupts are enabled on the ACCES 104-QUAD-8, they occur whenever FLG1 is active. Four functions are available for the FLG1 signal: Carry, Compare, Carry-Borrow, and Index. Carry: Interrupt generated on active low Carry signal. Carry signal toggles every time the respective channel's counter overflows. Compare: Interrupt generated on active low Compare signal. Compare signal toggles every time respective channel's preset register is equal to the respective channel's counter. Carry-Borrow: Interrupt generated on active low Carry signal and active low Borrow signal. Carry signal toggles every time the respective channel's counter overflows. Borrow signal toggles every time the respective channel's counter underflows. Index: Interrupt generated on active high Index signal. These four functions correspond respectivefly to the following four Counter event types: COUNTER_EVENT_OVERFLOW, COUNTER_EVENT_THRESHOLD, COUNTER_EVENT_OVERFLOW_UNDERFLOW, and COUNTER_EVENT_INDEX. Interrupts push Counter events to event channel X, where 'X' is the respective channel whose FLG1 activated. This patch adds IRQ support for the ACCES 104-QUAD-8. The interrupt line numbers for the devices may be configured via the irq array module parameter. Acked-by: Syed Nayyar Waris Signed-off-by: William Breathitt Gray --- drivers/counter/104-quad-8.c | 167 +++++++++++++++++++++++++++++++++-- drivers/counter/Kconfig | 6 +- 2 files changed, 164 insertions(+), 9 deletions(-) diff --git a/drivers/counter/104-quad-8.c b/drivers/counter/104-quad-8.c index a56751bf1e9b..1cbd60aaed69 100644 --- a/drivers/counter/104-quad-8.c +++ b/drivers/counter/104-quad-8.c @@ -11,6 +11,7 @@ #include #include #include +#include #include #include #include @@ -25,6 +26,10 @@ static unsigned int num_quad8; module_param_hw_array(base, uint, ioport, &num_quad8, 0); MODULE_PARM_DESC(base, "ACCES 104-QUAD-8 base addresses"); +static unsigned int irq[max_num_isa_dev(QUAD8_EXTENT)]; +module_param_hw_array(irq, uint, irq, NULL, 0); +MODULE_PARM_DESC(irq, "ACCES 104-QUAD-8 interrupt line numbers"); + #define QUAD8_NUM_COUNTERS 8 /** @@ -38,6 +43,8 @@ MODULE_PARM_DESC(base, "ACCES 104-QUAD-8 base addresses"); * @quadrature_scale: array of quadrature mode scale configurations * @ab_enable: array of A and B inputs enable configurations * @preset_enable: array of set_to_preset_on_index attribute configurations + * @irq_trigger: array of current IRQ trigger function configurations + * @next_irq_trigger: array of next IRQ trigger function configurations * @synchronous_mode: array of index function synchronous mode configurations * @index_polarity: array of index function polarity configurations * @cable_fault_enable: differential encoder cable status enable configurations @@ -53,13 +60,17 @@ struct quad8 { unsigned int quadrature_scale[QUAD8_NUM_COUNTERS]; unsigned int ab_enable[QUAD8_NUM_COUNTERS]; unsigned int preset_enable[QUAD8_NUM_COUNTERS]; + unsigned int irq_trigger[QUAD8_NUM_COUNTERS]; + unsigned int next_irq_trigger[QUAD8_NUM_COUNTERS]; unsigned int synchronous_mode[QUAD8_NUM_COUNTERS]; unsigned int index_polarity[QUAD8_NUM_COUNTERS]; unsigned int cable_fault_enable; unsigned int base; }; +#define QUAD8_REG_INTERRUPT_STATUS 0x10 #define QUAD8_REG_CHAN_OP 0x11 +#define QUAD8_REG_INDEX_INTERRUPT 0x12 #define QUAD8_REG_INDEX_INPUT_LEVELS 0x16 #define QUAD8_DIFF_ENCODER_CABLE_STATUS 0x17 /* Borrow Toggle flip-flop */ @@ -92,8 +103,8 @@ struct quad8 { #define QUAD8_RLD_CNTR_OUT 0x10 /* Transfer Preset Register LSB to FCK Prescaler */ #define QUAD8_RLD_PRESET_PSC 0x18 -#define QUAD8_CHAN_OP_ENABLE_COUNTERS 0x00 #define QUAD8_CHAN_OP_RESET_COUNTERS 0x01 +#define QUAD8_CHAN_OP_ENABLE_INTERRUPT_FUNC 0x04 #define QUAD8_CMR_QUADRATURE_X1 0x08 #define QUAD8_CMR_QUADRATURE_X2 0x10 #define QUAD8_CMR_QUADRATURE_X4 0x18 @@ -378,13 +389,103 @@ static int quad8_action_read(struct counter_device *counter, } } +enum { + QUAD8_EVENT_NONE = -1, + QUAD8_EVENT_CARRY = 0, + QUAD8_EVENT_COMPARE = 1, + QUAD8_EVENT_CARRY_BORROW = 2, + QUAD8_EVENT_INDEX = 3, +}; + +static int quad8_events_configure(struct counter_device *counter) +{ + struct quad8 *const priv = counter->priv; + unsigned long irq_enabled = 0; + unsigned long irqflags; + size_t channel; + unsigned long ior_cfg; + unsigned long base_offset; + + spin_lock_irqsave(&priv->lock, irqflags); + + /* Enable interrupts for the requested channels, disable for the rest */ + for (channel = 0; channel < QUAD8_NUM_COUNTERS; channel++) { + if (priv->next_irq_trigger[channel] == QUAD8_EVENT_NONE) + continue; + + if (priv->irq_trigger[channel] != priv->next_irq_trigger[channel]) { + /* Save new IRQ function configuration */ + priv->irq_trigger[channel] = priv->next_irq_trigger[channel]; + + /* Load configuration to I/O Control Register */ + ior_cfg = priv->ab_enable[channel] | + priv->preset_enable[channel] << 1 | + priv->irq_trigger[channel] << 3; + base_offset = priv->base + 2 * channel + 1; + outb(QUAD8_CTR_IOR | ior_cfg, base_offset); + } + + /* Reset next IRQ trigger function configuration */ + priv->next_irq_trigger[channel] = QUAD8_EVENT_NONE; + + /* Enable IRQ line */ + irq_enabled |= BIT(channel); + } + + outb(irq_enabled, priv->base + QUAD8_REG_INDEX_INTERRUPT); + + spin_unlock_irqrestore(&priv->lock, irqflags); + + return 0; +} + +static int quad8_watch_validate(struct counter_device *counter, + const struct counter_watch *watch) +{ + struct quad8 *const priv = counter->priv; + + if (watch->channel > QUAD8_NUM_COUNTERS - 1) + return -EINVAL; + + switch (watch->event) { + case COUNTER_EVENT_OVERFLOW: + if (priv->next_irq_trigger[watch->channel] == QUAD8_EVENT_NONE) + priv->next_irq_trigger[watch->channel] = QUAD8_EVENT_CARRY; + else if (priv->next_irq_trigger[watch->channel] != QUAD8_EVENT_CARRY) + return -EINVAL; + return 0; + case COUNTER_EVENT_THRESHOLD: + if (priv->next_irq_trigger[watch->channel] == QUAD8_EVENT_NONE) + priv->next_irq_trigger[watch->channel] = QUAD8_EVENT_COMPARE; + else if (priv->next_irq_trigger[watch->channel] != QUAD8_EVENT_COMPARE) + return -EINVAL; + return 0; + case COUNTER_EVENT_OVERFLOW_UNDERFLOW: + if (priv->next_irq_trigger[watch->channel] == QUAD8_EVENT_NONE) + priv->next_irq_trigger[watch->channel] = QUAD8_EVENT_CARRY_BORROW; + else if (priv->next_irq_trigger[watch->channel] != QUAD8_EVENT_CARRY_BORROW) + return -EINVAL; + return 0; + case COUNTER_EVENT_INDEX: + if (priv->next_irq_trigger[watch->channel] == QUAD8_EVENT_NONE) + priv->next_irq_trigger[watch->channel] = QUAD8_EVENT_INDEX; + else if (priv->next_irq_trigger[watch->channel] != QUAD8_EVENT_INDEX) + return -EINVAL; + return 0; + default: + return -EINVAL; + } +} + static const struct counter_ops quad8_ops = { .signal_read = quad8_signal_read, .count_read = quad8_count_read, .count_write = quad8_count_write, .function_read = quad8_function_read, .function_write = quad8_function_write, - .action_read = quad8_action_read + .action_read = quad8_action_read, + .events_configure = quad8_events_configure, + .watch_validate = quad8_watch_validate, }; static const char *const quad8_index_polarity_modes[] = { @@ -579,7 +680,8 @@ static int quad8_count_enable_write(struct counter_device *counter, priv->ab_enable[count->id] = enable; - ior_cfg = enable | priv->preset_enable[count->id] << 1; + ior_cfg = enable | priv->preset_enable[count->id] << 1 | + priv->irq_trigger[count->id] << 3; /* Load I/O control configuration */ outb(QUAD8_CTR_IOR | ior_cfg, base_offset + 1); @@ -728,7 +830,8 @@ static int quad8_count_preset_enable_write(struct counter_device *counter, priv->preset_enable[count->id] = preset_enable; - ior_cfg = priv->ab_enable[count->id] | preset_enable << 1; + ior_cfg = priv->ab_enable[count->id] | preset_enable << 1 | + priv->irq_trigger[count->id] << 3; /* Load I/O control configuration to Input / Output Control Register */ outb(QUAD8_CTR_IOR | ior_cfg, base_offset); @@ -980,11 +1083,54 @@ static struct counter_count quad8_counts[] = { QUAD8_COUNT(7, "Channel 8 Count") }; +static irqreturn_t quad8_irq_handler(int irq, void *private) +{ + struct quad8 *const priv = private; + const unsigned long base = priv->base; + unsigned long irq_status; + unsigned long channel; + u8 event; + + irq_status = inb(base + QUAD8_REG_INTERRUPT_STATUS); + if (!irq_status) + return IRQ_NONE; + + for_each_set_bit(channel, &irq_status, QUAD8_NUM_COUNTERS) { + switch (priv->irq_trigger[channel]) { + case QUAD8_EVENT_CARRY: + event = COUNTER_EVENT_OVERFLOW; + break; + case QUAD8_EVENT_COMPARE: + event = COUNTER_EVENT_THRESHOLD; + break; + case QUAD8_EVENT_CARRY_BORROW: + event = COUNTER_EVENT_OVERFLOW_UNDERFLOW; + break; + case QUAD8_EVENT_INDEX: + event = COUNTER_EVENT_INDEX; + break; + default: + /* should never reach this path */ + WARN_ONCE(true, "invalid interrupt trigger function %u configured for channel %lu\n", + priv->irq_trigger[channel], channel); + continue; + } + + counter_push_event(&priv->counter, event, channel); + } + + /* Clear pending interrupts on device */ + outb(QUAD8_CHAN_OP_ENABLE_INTERRUPT_FUNC, base + QUAD8_REG_CHAN_OP); + + return IRQ_HANDLED; +} + static int quad8_probe(struct device *dev, unsigned int id) { struct quad8 *priv; int i, j; unsigned int base_offset; + int err; if (!devm_request_region(dev, base[id], QUAD8_EXTENT, dev_name(dev))) { dev_err(dev, "Unable to lock port addresses (0x%X-0x%X)\n", @@ -1009,6 +1155,8 @@ static int quad8_probe(struct device *dev, unsigned int id) spin_lock_init(&priv->lock); + /* Reset Index/Interrupt Register */ + outb(0x00, base[id] + QUAD8_REG_INDEX_INTERRUPT); /* Reset all counters and disable interrupt function */ outb(QUAD8_CHAN_OP_RESET_COUNTERS, base[id] + QUAD8_REG_CHAN_OP); /* Set initial configuration for all counters */ @@ -1035,11 +1183,18 @@ static int quad8_probe(struct device *dev, unsigned int id) outb(QUAD8_CTR_IOR, base_offset + 1); /* Disable index function; negative index polarity */ outb(QUAD8_CTR_IDR, base_offset + 1); + /* Initialize next IRQ trigger function configuration */ + priv->next_irq_trigger[i] = QUAD8_EVENT_NONE; } /* Disable Differential Encoder Cable Status for all channels */ outb(0xFF, base[id] + QUAD8_DIFF_ENCODER_CABLE_STATUS); - /* Enable all counters */ - outb(QUAD8_CHAN_OP_ENABLE_COUNTERS, base[id] + QUAD8_REG_CHAN_OP); + /* Enable all counters and enable interrupt function */ + outb(QUAD8_CHAN_OP_ENABLE_INTERRUPT_FUNC, base[id] + QUAD8_REG_CHAN_OP); + + err = devm_request_irq(dev, irq[id], quad8_irq_handler, IRQF_SHARED, + priv->counter.name, priv); + if (err) + return err; return devm_counter_register(dev, &priv->counter); } diff --git a/drivers/counter/Kconfig b/drivers/counter/Kconfig index d5d2540b30c2..3dcdb681c4e4 100644 --- a/drivers/counter/Kconfig +++ b/drivers/counter/Kconfig @@ -23,11 +23,11 @@ config 104_QUAD_8 A counter's respective error flag may be cleared by performing a write operation on the respective count value attribute. Although the 104-QUAD-8 counters have a 25-bit range, only the lower 24 bits may be - set, either directly or via the counter's preset attribute. Interrupts - are not supported by this driver. + set, either directly or via the counter's preset attribute. The base port addresses for the devices may be configured via the base - array module parameter. + array module parameter. The interrupt line numbers for the devices may + be configured via the irq array module parameter. config INTERRUPT_CNT tristate "Interrupt counter driver" -- 2.33.0