On Fri, 2021-07-23 at 14:57 -0400, Hamza Mahfooz wrote:
> For devices that only support the BATTERY_VOLTAGE (0x1001) feature, UPower
> requires the additional information provided by this patch, to set them up.
> 
> Signed-off-by: Hamza Mahfooz <someguy@effective-light.com>
> ---
> 
> v2: use ARRAY_SIZE() and set voltages[]'s size to 100
> 
> v3: add a check to ensure that exactly 100 elements are in voltages[]
> ---
>  drivers/hid/hid-logitech-hidpp.c | 32 +++++++++++++++++++++++++++++++-
>  1 file changed, 31 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid-logitech-hidpp.c
> index 61635e629469..4921823144de 100644
> --- a/drivers/hid/hid-logitech-hidpp.c
> +++ b/drivers/hid/hid-logitech-hidpp.c
> @@ -1331,6 +1331,33 @@ static int hidpp20_battery_get_battery_voltage(struct
> hidpp_device *hidpp,
>         return 0;
>  }
>  
> +static int hidpp20_map_battery_capacity(int voltage)
> +{
> +       static const int voltages[] = {
> +               4186, 4156, 4143, 4133, 4122, 4113, 4103, 4094, 4086, 4075,
> +               4067, 4059, 4051, 4043, 4035, 4027, 4019, 4011, 4003, 3997,
> +               3989, 3983, 3976, 3969, 3961, 3955, 3949, 3942, 3935, 3929,
> +               3922, 3916, 3909, 3902, 3896, 3890, 3883, 3877, 3870, 3865,
> +               3859, 3853, 3848, 3842, 3837, 3833, 3828, 3824, 3819, 3815,
> +               3811, 3808, 3804, 3800, 3797, 3793, 3790, 3787, 3784, 3781,
> +               3778, 3775, 3772, 3770, 3767, 3764, 3762, 3759, 3757, 3754,
> +               3751, 3748, 3744, 3741, 3737, 3734, 3730, 3726, 3724, 3720,
> +               3717, 3714, 3710, 3706, 3702, 3697, 3693, 3688, 3683, 3677,
> +               3671, 3666, 3662, 3658, 3654, 3646, 3633, 3612, 3579, 3537
> +       };

Hi Hamza,

I think it's important to note that this table depends on the battery technology
(type). While most devices use this map, not all do. I think it's reasonable to
just assume this is the map as we don't really have the capability to test all
products and the products that do not use this map are very few.

That said, I think we should definitely have a comment here nothing that, and
possible have some bounds checks for the reported voltage value hinting that
there may be bug.

Cheers,
Filipe Laíns

> +
> +       int i;
> +
> +       BUILD_BUG_ON(ARRAY_SIZE(voltages) != 100);
> +
> +       for (i = 0; i < ARRAY_SIZE(voltages); i++) {
> +               if (voltage >= voltages[i])
> +                       return ARRAY_SIZE(voltages) - i;
> +       }
> +
> +       return 0;
> +}
> +
>  static int hidpp20_query_battery_voltage_info(struct hidpp_device *hidpp)
>  {
>         u8 feature_type;
> @@ -1354,6 +1381,7 @@ static int hidpp20_query_battery_voltage_info(struct
> hidpp_device *hidpp)
>  
>         hidpp->battery.status = status;
>         hidpp->battery.voltage = voltage;
> +       hidpp->battery.capacity = hidpp20_map_battery_capacity(voltage);
>         hidpp->battery.level = level;
>         hidpp->battery.charge_type = charge_type;
>         hidpp->battery.online = status != POWER_SUPPLY_STATUS_NOT_CHARGING;
> @@ -1378,6 +1406,7 @@ static int hidpp20_battery_voltage_event(struct
> hidpp_device *hidpp,
>  
>         if (voltage != hidpp->battery.voltage || status != hidpp-
> >battery.status) {
>                 hidpp->battery.voltage = voltage;
> +               hidpp->battery.capacity = hidpp20_map_battery_capacity(voltage);
>                 hidpp->battery.status = status;
>                 hidpp->battery.level = level;
>                 hidpp->battery.charge_type = charge_type;
> @@ -3717,7 +3746,8 @@ static int hidpp_initialize_battery(struct hidpp_device
> *hidpp)
>         num_battery_props = ARRAY_SIZE(hidpp_battery_props) - 3;
>  
>         if (hidpp->capabilities & HIDPP_CAPABILITY_BATTERY_MILEAGE ||
> -           hidpp->capabilities & HIDPP_CAPABILITY_BATTERY_PERCENTAGE)
> +           hidpp->capabilities & HIDPP_CAPABILITY_BATTERY_PERCENTAGE ||
> +           hidpp->capabilities & HIDPP_CAPABILITY_BATTERY_VOLTAGE)
>                 battery_props[num_battery_props++] =
>                                 POWER_SUPPLY_PROP_CAPACITY;
>