From: Tom Lendacky <thomas.lendacky@amd.com>
To: kvm@vger.kernel.org, linux-kernel@vger.kernel.org, x86@kernel.org
Cc: Paolo Bonzini <pbonzini@redhat.com>,
Jim Mattson <jmattson@google.com>, Joerg Roedel <joro@8bytes.org>,
Sean Christopherson <sean.j.christopherson@intel.com>,
Vitaly Kuznetsov <vkuznets@redhat.com>,
Wanpeng Li <wanpengli@tencent.com>,
Borislav Petkov <bp@alien8.de>, Ingo Molnar <mingo@redhat.com>,
Thomas Gleixner <tglx@linutronix.de>,
Brijesh Singh <brijesh.singh@amd.com>
Subject: [PATCH v5 03/34] KVM: SVM: Add support for SEV-ES capability in KVM
Date: Thu, 10 Dec 2020 11:06:47 -0600 [thread overview]
Message-ID: <e66792323982c822350e40c7a1cf67ea2978a70b.1607620037.git.thomas.lendacky@amd.com> (raw)
In-Reply-To: <cover.1607620037.git.thomas.lendacky@amd.com>
From: Tom Lendacky <thomas.lendacky@amd.com>
Add support to KVM for determining if a system is capable of supporting
SEV-ES as well as determining if a guest is an SEV-ES guest.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
---
arch/x86/kvm/Kconfig | 3 ++-
arch/x86/kvm/svm/sev.c | 47 ++++++++++++++++++++++++++++++++++--------
arch/x86/kvm/svm/svm.c | 20 +++++++++---------
arch/x86/kvm/svm/svm.h | 17 ++++++++++++++-
4 files changed, 66 insertions(+), 21 deletions(-)
diff --git a/arch/x86/kvm/Kconfig b/arch/x86/kvm/Kconfig
index f92dfd8ef10d..7ac592664c52 100644
--- a/arch/x86/kvm/Kconfig
+++ b/arch/x86/kvm/Kconfig
@@ -100,7 +100,8 @@ config KVM_AMD_SEV
depends on KVM_AMD && X86_64
depends on CRYPTO_DEV_SP_PSP && !(KVM_AMD=y && CRYPTO_DEV_CCP_DD=m)
help
- Provides support for launching Encrypted VMs on AMD processors.
+ Provides support for launching Encrypted VMs (SEV) and Encrypted VMs
+ with Encrypted State (SEV-ES) on AMD processors.
config KVM_MMU_AUDIT
bool "Audit KVM MMU"
diff --git a/arch/x86/kvm/svm/sev.c b/arch/x86/kvm/svm/sev.c
index a4ba5476bf42..9bf5e9dadff5 100644
--- a/arch/x86/kvm/svm/sev.c
+++ b/arch/x86/kvm/svm/sev.c
@@ -932,7 +932,7 @@ int svm_mem_enc_op(struct kvm *kvm, void __user *argp)
struct kvm_sev_cmd sev_cmd;
int r;
- if (!svm_sev_enabled())
+ if (!svm_sev_enabled() || !sev)
return -ENOTTY;
if (!argp)
@@ -1125,29 +1125,58 @@ void sev_vm_destroy(struct kvm *kvm)
sev_asid_free(sev->asid);
}
-int __init sev_hardware_setup(void)
+void __init sev_hardware_setup(void)
{
+ unsigned int eax, ebx, ecx, edx;
+ bool sev_es_supported = false;
+ bool sev_supported = false;
+
+ /* Does the CPU support SEV? */
+ if (!boot_cpu_has(X86_FEATURE_SEV))
+ goto out;
+
+ /* Retrieve SEV CPUID information */
+ cpuid(0x8000001f, &eax, &ebx, &ecx, &edx);
+
/* Maximum number of encrypted guests supported simultaneously */
- max_sev_asid = cpuid_ecx(0x8000001F);
+ max_sev_asid = ecx;
if (!svm_sev_enabled())
- return 1;
+ goto out;
/* Minimum ASID value that should be used for SEV guest */
- min_sev_asid = cpuid_edx(0x8000001F);
+ min_sev_asid = edx;
/* Initialize SEV ASID bitmaps */
sev_asid_bitmap = bitmap_zalloc(max_sev_asid, GFP_KERNEL);
if (!sev_asid_bitmap)
- return 1;
+ goto out;
sev_reclaim_asid_bitmap = bitmap_zalloc(max_sev_asid, GFP_KERNEL);
if (!sev_reclaim_asid_bitmap)
- return 1;
+ goto out;
- pr_info("SEV supported\n");
+ pr_info("SEV supported: %u ASIDs\n", max_sev_asid - min_sev_asid + 1);
+ sev_supported = true;
- return 0;
+ /* SEV-ES support requested? */
+ if (!sev_es)
+ goto out;
+
+ /* Does the CPU support SEV-ES? */
+ if (!boot_cpu_has(X86_FEATURE_SEV_ES))
+ goto out;
+
+ /* Has the system been allocated ASIDs for SEV-ES? */
+ if (min_sev_asid == 1)
+ goto out;
+
+ pr_info("SEV-ES supported: %u ASIDs\n", min_sev_asid - 1);
+ sev_es_supported = true;
+
+out:
+ sev = sev_supported;
+ sev_es = sev_es_supported;
}
void sev_hardware_teardown(void)
diff --git a/arch/x86/kvm/svm/svm.c b/arch/x86/kvm/svm/svm.c
index 6dc337b9c231..a1ea30c98629 100644
--- a/arch/x86/kvm/svm/svm.c
+++ b/arch/x86/kvm/svm/svm.c
@@ -187,9 +187,13 @@ static int vgif = true;
module_param(vgif, int, 0444);
/* enable/disable SEV support */
-static int sev = IS_ENABLED(CONFIG_AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT);
+int sev = IS_ENABLED(CONFIG_AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT);
module_param(sev, int, 0444);
+/* enable/disable SEV-ES support */
+int sev_es = IS_ENABLED(CONFIG_AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT);
+module_param(sev_es, int, 0444);
+
static bool __read_mostly dump_invalid_vmcb = 0;
module_param(dump_invalid_vmcb, bool, 0644);
@@ -959,15 +963,11 @@ static __init int svm_hardware_setup(void)
kvm_enable_efer_bits(EFER_SVME | EFER_LMSLE);
}
- if (sev) {
- if (boot_cpu_has(X86_FEATURE_SEV) &&
- IS_ENABLED(CONFIG_KVM_AMD_SEV)) {
- r = sev_hardware_setup();
- if (r)
- sev = false;
- } else {
- sev = false;
- }
+ if (IS_ENABLED(CONFIG_KVM_AMD_SEV) && sev) {
+ sev_hardware_setup();
+ } else {
+ sev = false;
+ sev_es = false;
}
svm_adjust_mmio_mask();
diff --git a/arch/x86/kvm/svm/svm.h b/arch/x86/kvm/svm/svm.h
index fdff76eb6ceb..56d950df82e5 100644
--- a/arch/x86/kvm/svm/svm.h
+++ b/arch/x86/kvm/svm/svm.h
@@ -61,6 +61,7 @@ enum {
struct kvm_sev_info {
bool active; /* SEV enabled guest */
+ bool es_active; /* SEV-ES enabled guest */
unsigned int asid; /* ASID used for this guest */
unsigned int handle; /* SEV firmware handle */
int fd; /* SEV device fd */
@@ -352,6 +353,9 @@ static inline bool gif_set(struct vcpu_svm *svm)
#define MSR_CR3_LONG_MBZ_MASK 0xfff0000000000000U
#define MSR_INVALID 0xffffffffU
+extern int sev;
+extern int sev_es;
+
u32 svm_msrpm_offset(u32 msr);
u32 *svm_vcpu_alloc_msrpm(void);
void svm_vcpu_init_msrpm(struct kvm_vcpu *vcpu, u32 *msrpm);
@@ -484,6 +488,17 @@ static inline bool sev_guest(struct kvm *kvm)
#endif
}
+static inline bool sev_es_guest(struct kvm *kvm)
+{
+#ifdef CONFIG_KVM_AMD_SEV
+ struct kvm_sev_info *sev = &to_kvm_svm(kvm)->sev_info;
+
+ return sev_guest(kvm) && sev->es_active;
+#else
+ return false;
+#endif
+}
+
static inline bool svm_sev_enabled(void)
{
return IS_ENABLED(CONFIG_KVM_AMD_SEV) ? max_sev_asid : 0;
@@ -496,7 +511,7 @@ int svm_register_enc_region(struct kvm *kvm,
int svm_unregister_enc_region(struct kvm *kvm,
struct kvm_enc_region *range);
void pre_sev_run(struct vcpu_svm *svm, int cpu);
-int __init sev_hardware_setup(void);
+void __init sev_hardware_setup(void);
void sev_hardware_teardown(void);
#endif
--
2.28.0
next prev parent reply other threads:[~2020-12-10 17:11 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-10 17:06 [PATCH v5 00/34] SEV-ES hypervisor support Tom Lendacky
2020-12-10 17:06 ` [PATCH v5 01/34] x86/cpu: Add VM page flush MSR availablility as a CPUID feature Tom Lendacky
2020-12-10 17:06 ` [PATCH v5 02/34] KVM: SVM: Remove the call to sev_platform_status() during setup Tom Lendacky
2020-12-10 17:06 ` Tom Lendacky [this message]
2020-12-10 17:06 ` [PATCH v5 04/34] KVM: SVM: Add GHCB accessor functions for retrieving fields Tom Lendacky
2020-12-10 17:06 ` [PATCH v5 05/34] KVM: SVM: Add support for the SEV-ES VMSA Tom Lendacky
2020-12-10 17:06 ` [PATCH v5 06/34] KVM: x86: Mark GPRs dirty when written Tom Lendacky
2020-12-10 17:06 ` [PATCH v5 07/34] KVM: SVM: Add required changes to support intercepts under SEV-ES Tom Lendacky
2020-12-10 17:21 ` [PATCH v5 00/34] SEV-ES hypervisor support Tom Lendacky
2020-12-10 17:09 Tom Lendacky
2020-12-10 17:09 ` [PATCH v5 03/34] KVM: SVM: Add support for SEV-ES capability in KVM Tom Lendacky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e66792323982c822350e40c7a1cf67ea2978a70b.1607620037.git.thomas.lendacky@amd.com \
--to=thomas.lendacky@amd.com \
--cc=bp@alien8.de \
--cc=brijesh.singh@amd.com \
--cc=jmattson@google.com \
--cc=joro@8bytes.org \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=pbonzini@redhat.com \
--cc=sean.j.christopherson@intel.com \
--cc=tglx@linutronix.de \
--cc=vkuznets@redhat.com \
--cc=wanpengli@tencent.com \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).