From: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> To: "Stephen Boyd" <sboyd@kernel.org>, "Rob Herring" <robh+dt@kernel.org>, "Manivannan Sadhasivam" <manivannan.sadhasivam@linaro.org>, "Andreas Färber" <afaerber@suse.de>, "Michael Turquette" <mturquette@baylibre.com>, "Edgar Bernardi Righi" <edgar.righi@lsitec.org.br> Cc: linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-actions@lists.infradead.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org Subject: [PATCH v3 3/6] clk: actions: Fix bisp_factor_table based clocks on Owl S500 SoC Date: Thu, 10 Jun 2021 23:05:23 +0300 [thread overview] Message-ID: <e675820a46cd9930d8d576c6cae61d41c1a8416f.1623354574.git.cristian.ciocaltea@gmail.com> (raw) In-Reply-To: <cover.1623354574.git.cristian.ciocaltea@gmail.com> The following clocks of the Actions Semi Owl S500 SoC have been defined to use a shared clock factor table 'bisp_factor_table[]': DE[1-2], VCE, VDE, BISP, SENSOR[0-1] There are several issues involved in this approach: * 'bisp_factor_table[]' describes the configuration of a regular 8-rates divider, so its usage is redundant. Additionally, judging by the BISP clock context, it is incomplete since it maps only 8 out of 12 possible entries. * The clocks mentioned above are not identical in terms of the available rates, therefore cannot rely on the same factor table. Specifically, BISP and SENSOR* are standard 12-rate dividers so their configuration should rely on a proper clock div table, while VCE and VDE require a factor table that is a actually a subset of the one needed for DE[1-2] clocks. Let's fix this by implementing the following: * Add new factor tables 'de_factor_table' and 'hde_factor_table' to properly handle DE[1-2], VCE and VDE clocks. * Add a common div table 'std12rate_div_table' for BISP and SENSOR[0-1] clocks converted to OWL_COMP_DIV. * Drop the now unused 'bisp_factor_table[]'. Additionally, drop the CLK_IGNORE_UNUSED flag for SENSOR[0-1] since there is no reason to always keep ON those clocks. Fixes: ed6b4795ece4 ("clk: actions: Add clock driver for S500 SoC") Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> --- Changes in v3: - Added Reviewed-by tag from Mani Changes in v2: - Re-added OWL_GATE_HW to SENSOR[0-1], according to the datasheet they are gated, even though the vendor implementation states the opposite drivers/clk/actions/owl-s500.c | 44 ++++++++++++++++++++++------------ 1 file changed, 29 insertions(+), 15 deletions(-) diff --git a/drivers/clk/actions/owl-s500.c b/drivers/clk/actions/owl-s500.c index 42abdf964044..42d6899755e6 100644 --- a/drivers/clk/actions/owl-s500.c +++ b/drivers/clk/actions/owl-s500.c @@ -140,9 +140,16 @@ static struct clk_factor_table sd_factor_table[] = { { 0, 0, 0 }, }; -static struct clk_factor_table bisp_factor_table[] = { - { 0, 1, 1 }, { 1, 1, 2 }, { 2, 1, 3 }, { 3, 1, 4 }, - { 4, 1, 5 }, { 5, 1, 6 }, { 6, 1, 7 }, { 7, 1, 8 }, +static struct clk_factor_table de_factor_table[] = { + { 0, 1, 1 }, { 1, 2, 3 }, { 2, 1, 2 }, { 3, 2, 5 }, + { 4, 1, 3 }, { 5, 1, 4 }, { 6, 1, 6 }, { 7, 1, 8 }, + { 8, 1, 12 }, + { 0, 0, 0 }, +}; + +static struct clk_factor_table hde_factor_table[] = { + { 0, 1, 1 }, { 1, 2, 3 }, { 2, 1, 2 }, { 3, 2, 5 }, + { 4, 1, 3 }, { 5, 1, 4 }, { 6, 1, 6 }, { 7, 1, 8 }, { 0, 0, 0 }, }; @@ -156,6 +163,13 @@ static struct clk_div_table rmii_ref_div_table[] = { { 0, 0 }, }; +static struct clk_div_table std12rate_div_table[] = { + { 0, 1 }, { 1, 2 }, { 2, 3 }, { 3, 4 }, + { 4, 5 }, { 5, 6 }, { 6, 7 }, { 7, 8 }, + { 8, 9 }, { 9, 10 }, { 10, 11 }, { 11, 12 }, + { 0, 0 }, +}; + static struct clk_div_table i2s_div_table[] = { { 0, 1 }, { 1, 2 }, { 2, 3 }, { 3, 4 }, { 4, 6 }, { 5, 8 }, { 6, 12 }, { 7, 16 }, @@ -191,39 +205,39 @@ static OWL_DIVIDER(rmii_ref_clk, "rmii_ref_clk", "ethernet_pll_clk", CMU_ETHERNE /* factor clocks */ static OWL_FACTOR(ahb_clk, "ahb_clk", "h_clk", CMU_BUSCLK1, 2, 2, ahb_factor_table, 0, 0); -static OWL_FACTOR(de1_clk, "de_clk1", "de_clk", CMU_DECLK, 0, 3, bisp_factor_table, 0, 0); -static OWL_FACTOR(de2_clk, "de_clk2", "de_clk", CMU_DECLK, 4, 3, bisp_factor_table, 0, 0); +static OWL_FACTOR(de1_clk, "de_clk1", "de_clk", CMU_DECLK, 0, 4, de_factor_table, 0, 0); +static OWL_FACTOR(de2_clk, "de_clk2", "de_clk", CMU_DECLK, 4, 4, de_factor_table, 0, 0); /* composite clocks */ static OWL_COMP_FACTOR(vce_clk, "vce_clk", hde_clk_mux_p, OWL_MUX_HW(CMU_VCECLK, 4, 2), OWL_GATE_HW(CMU_DEVCLKEN0, 26, 0), - OWL_FACTOR_HW(CMU_VCECLK, 0, 3, 0, bisp_factor_table), + OWL_FACTOR_HW(CMU_VCECLK, 0, 3, 0, hde_factor_table), 0); static OWL_COMP_FACTOR(vde_clk, "vde_clk", hde_clk_mux_p, OWL_MUX_HW(CMU_VDECLK, 4, 2), OWL_GATE_HW(CMU_DEVCLKEN0, 25, 0), - OWL_FACTOR_HW(CMU_VDECLK, 0, 3, 0, bisp_factor_table), + OWL_FACTOR_HW(CMU_VDECLK, 0, 3, 0, hde_factor_table), 0); -static OWL_COMP_FACTOR(bisp_clk, "bisp_clk", bisp_clk_mux_p, +static OWL_COMP_DIV(bisp_clk, "bisp_clk", bisp_clk_mux_p, OWL_MUX_HW(CMU_BISPCLK, 4, 1), OWL_GATE_HW(CMU_DEVCLKEN0, 14, 0), - OWL_FACTOR_HW(CMU_BISPCLK, 0, 3, 0, bisp_factor_table), + OWL_DIVIDER_HW(CMU_BISPCLK, 0, 4, 0, std12rate_div_table), 0); -static OWL_COMP_FACTOR(sensor0_clk, "sensor0_clk", sensor_clk_mux_p, +static OWL_COMP_DIV(sensor0_clk, "sensor0_clk", sensor_clk_mux_p, OWL_MUX_HW(CMU_SENSORCLK, 4, 1), OWL_GATE_HW(CMU_DEVCLKEN0, 14, 0), - OWL_FACTOR_HW(CMU_SENSORCLK, 0, 3, 0, bisp_factor_table), - CLK_IGNORE_UNUSED); + OWL_DIVIDER_HW(CMU_SENSORCLK, 0, 4, 0, std12rate_div_table), + 0); -static OWL_COMP_FACTOR(sensor1_clk, "sensor1_clk", sensor_clk_mux_p, +static OWL_COMP_DIV(sensor1_clk, "sensor1_clk", sensor_clk_mux_p, OWL_MUX_HW(CMU_SENSORCLK, 4, 1), OWL_GATE_HW(CMU_DEVCLKEN0, 14, 0), - OWL_FACTOR_HW(CMU_SENSORCLK, 8, 3, 0, bisp_factor_table), - CLK_IGNORE_UNUSED); + OWL_DIVIDER_HW(CMU_SENSORCLK, 8, 4, 0, std12rate_div_table), + 0); static OWL_COMP_FACTOR(sd0_clk, "sd0_clk", sd_clk_mux_p, OWL_MUX_HW(CMU_SD0CLK, 9, 1), -- 2.32.0
next prev parent reply other threads:[~2021-06-10 20:06 UTC|newest] Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-06-10 20:05 [PATCH v3 0/6] Improve clock support for Actions " Cristian Ciocaltea 2021-06-10 20:05 ` [PATCH v3 1/6] clk: actions: Fix UART clock dividers on Owl " Cristian Ciocaltea 2021-06-28 1:46 ` Stephen Boyd 2021-06-10 20:05 ` [PATCH v3 2/6] clk: actions: Fix SD clocks factor table " Cristian Ciocaltea 2021-06-28 1:47 ` Stephen Boyd 2021-06-10 20:05 ` Cristian Ciocaltea [this message] 2021-06-28 1:47 ` [PATCH v3 3/6] clk: actions: Fix bisp_factor_table based clocks " Stephen Boyd 2021-06-10 20:05 ` [PATCH v3 4/6] clk: actions: Fix AHPPREDIV-H-AHB clock chain " Cristian Ciocaltea 2021-06-11 4:11 ` Manivannan Sadhasivam 2021-06-28 1:47 ` Stephen Boyd 2021-06-10 20:05 ` [PATCH v3 5/6] dt-bindings: clock: Add NIC and ETHERNET bindings for Actions " Cristian Ciocaltea 2021-06-28 1:47 ` Stephen Boyd 2021-06-10 20:05 ` [PATCH v3 6/6] clk: actions: Add NIC and ETHERNET clock support " Cristian Ciocaltea 2021-06-28 1:47 ` Stephen Boyd 2021-06-16 16:06 ` [PATCH v3 0/6] Improve " Cristian Ciocaltea
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=e675820a46cd9930d8d576c6cae61d41c1a8416f.1623354574.git.cristian.ciocaltea@gmail.com \ --to=cristian.ciocaltea@gmail.com \ --cc=afaerber@suse.de \ --cc=devicetree@vger.kernel.org \ --cc=edgar.righi@lsitec.org.br \ --cc=linux-actions@lists.infradead.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-clk@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=manivannan.sadhasivam@linaro.org \ --cc=mturquette@baylibre.com \ --cc=robh+dt@kernel.org \ --cc=sboyd@kernel.org \ --subject='Re: [PATCH v3 3/6] clk: actions: Fix bisp_factor_table based clocks on Owl S500 SoC' \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).