linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Peter Rosin <peda@axentia.se>
To: Liam Beguin <liambeguin@gmail.com>, jic23@kernel.org, lars@metafoo.de
Cc: linux-kernel@vger.kernel.org, linux-iio@vger.kernel.org,
	devicetree@vger.kernel.org, robh+dt@kernel.org
Subject: Re: [PATCH v8 12/14] iio: afe: rescale: add temperature transducers
Date: Thu, 26 Aug 2021 10:56:11 +0200	[thread overview]
Message-ID: <e6815e85-2b0e-cb24-e677-c3324a299b3a@axentia.se> (raw)
In-Reply-To: <20210820191714.69898-13-liambeguin@gmail.com>

On 2021-08-20 21:17, Liam Beguin wrote:
> From: Liam Beguin <lvb@xiphos.com>
> 
> A temperature transducer is a device that converts a thermal quantity
> into any other physical quantity. This patch add support for temperature
> to voltage (like the LTC2997) and temperature to current (like the
> AD590) linear transducers.
> In both cases these are assumed to be connected to a voltage ADC.
> 
> Signed-off-by: Liam Beguin <lvb@xiphos.com>
> ---
>  drivers/iio/afe/iio-rescale.c | 33 +++++++++++++++++++++++++++++++++
>  1 file changed, 33 insertions(+)
> 
> diff --git a/drivers/iio/afe/iio-rescale.c b/drivers/iio/afe/iio-rescale.c
> index 8cdcb6ffb563..12de44058bea 100644
> --- a/drivers/iio/afe/iio-rescale.c
> +++ b/drivers/iio/afe/iio-rescale.c
> @@ -427,11 +427,38 @@ static int rescale_temp_sense_rtd_props(struct device *dev,
>  	return 0;
>  }
>  
> +static int rescale_temp_transducer_props(struct device *dev,
> +					 struct rescale *rescale)
> +{
> +	s32 offset = 0;
> +	s32 sense = 1;
> +	s32 alpha;
> +	s64 tmp;
> +	int ret;
> +
> +	device_property_read_u32(dev, "sense-offset-millicelsius", &offset);
> +	device_property_read_u32(dev, "sense-resistor-ohms", &sense);
> +	ret = device_property_read_u32(dev, "alpha-ppm-per-celsius", &alpha);
> +	if (ret) {
> +		dev_err(dev, "failed to read alpha-ppm-per-celsius: %d\n", ret);
> +		return ret;
> +	}
> +
> +	rescale->numerator = 1000000;
> +	rescale->denominator = alpha * sense;
> +
> +	tmp = (s64)offset * (s64)alpha * (s64)sense;
> +	rescale->offset = div_s64(tmp, (s32)1000000);

Error: Too many casts :-)

I think it would make sense to lose tmp, and just spell it out in one
statement?

	rescale->offset = div_s64((s64)offset * rescale->denominator,
				  rescale->numerator);

Because you are prepping the offset so that it will survive a later rescaler
multiplication, and all the "random" multiplications and divisions don't
make that very clear.

Cheers,
Peter

> +
> +	return 0;
> +}
> +
>  enum rescale_variant {
>  	CURRENT_SENSE_AMPLIFIER,
>  	CURRENT_SENSE_SHUNT,
>  	VOLTAGE_DIVIDER,
>  	TEMP_SENSE_RTD,
> +	TEMP_TRANSDUCER,
>  };
>  
>  static const struct rescale_cfg rescale_cfg[] = {
> @@ -451,6 +478,10 @@ static const struct rescale_cfg rescale_cfg[] = {
>  		.type = IIO_TEMP,
>  		.props = rescale_temp_sense_rtd_props,
>  	},
> +	[TEMP_TRANSDUCER] = {
> +		.type = IIO_TEMP,
> +		.props = rescale_temp_transducer_props,
> +	},
>  };
>  
>  static const struct of_device_id rescale_match[] = {
> @@ -462,6 +493,8 @@ static const struct of_device_id rescale_match[] = {
>  	  .data = &rescale_cfg[VOLTAGE_DIVIDER], },
>  	{ .compatible = "temperature-sense-rtd",
>  	  .data = &rescale_cfg[TEMP_SENSE_RTD], },
> +	{ .compatible = "temperature-transducer",
> +	  .data = &rescale_cfg[TEMP_TRANSDUCER], },
>  	{ /* sentinel */ }
>  };
>  MODULE_DEVICE_TABLE(of, rescale_match);
> 

  reply	other threads:[~2021-08-26  8:56 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-20 19:17 [PATCH v8 00/14] iio: afe: add temperature rescaling support Liam Beguin
2021-08-20 19:17 ` [PATCH v8 01/14] iio: inkern: apply consumer scale on IIO_VAL_INT cases Liam Beguin
2021-08-20 19:17 ` [PATCH v8 02/14] iio: inkern: apply consumer scale when no channel scale is available Liam Beguin
2021-08-20 19:17 ` [PATCH v8 03/14] iio: inkern: make a best effort on offset calculation Liam Beguin
2021-08-20 19:17 ` [PATCH v8 04/14] iio: afe: rescale: expose scale processing function Liam Beguin
2021-08-20 19:17 ` [PATCH v8 05/14] iio: afe: rescale: add INT_PLUS_{MICRO,NANO} support Liam Beguin
2021-08-26  8:11   ` Peter Rosin
2021-08-29  2:50     ` Liam Beguin
2021-08-20 19:17 ` [PATCH v8 06/14] iio: afe: rescale: add offset support Liam Beguin
2021-08-20 19:17 ` [PATCH v8 07/14] iio: afe: rescale: use s64 for temporary scale calculations Liam Beguin
2021-08-20 19:17 ` [PATCH v8 08/14] iio: afe: rescale: reduce risk of integer overflow Liam Beguin
2021-08-26  9:13   ` Peter Rosin
2021-08-29  4:01     ` Liam Beguin
2021-08-20 19:17 ` [PATCH v8 09/14] iio: afe: rescale: fix accuracy for small fractional scales Liam Beguin
2021-08-20 23:37   ` kernel test robot
2021-08-21  1:33     ` Liam Beguin
2021-08-23  6:53       ` Peter Rosin
2021-08-21  2:00   ` kernel test robot
2021-08-21  7:21   ` kernel test robot
2021-08-22 22:18   ` Peter Rosin
2021-08-24 20:28     ` [PATCH v8 09/14] iio: afe: rescale: fix accuracy for small Liam Beguin
2021-08-26  9:53       ` Peter Rosin
2021-08-29  4:41         ` Liam Beguin
2021-08-30 11:27           ` Jonathan Cameron
2021-09-11 23:31             ` Liam Beguin
2021-08-30 13:03           ` Peter Rosin
2021-09-11 23:20             ` Liam Beguin
2021-08-30 11:22     ` [PATCH v8 09/14] iio: afe: rescale: fix accuracy for small fractional scales Jonathan Cameron
2021-08-30 14:30       ` Peter Rosin
2021-08-30 17:03         ` Jonathan Cameron
2021-09-02  2:27         ` Liam Beguin
2021-09-02 21:52           ` Peter Rosin
2021-08-20 19:17 ` [PATCH v8 10/14] iio: test: add basic tests for the iio-rescale driver Liam Beguin
2021-08-20 19:17 ` [PATCH v8 11/14] iio: afe: rescale: add RTD temperature sensor support Liam Beguin
2021-08-20 19:17 ` [PATCH v8 12/14] iio: afe: rescale: add temperature transducers Liam Beguin
2021-08-26  8:56   ` Peter Rosin [this message]
2021-08-29  2:33     ` Liam Beguin
2021-08-20 19:17 ` [PATCH v8 13/14] dt-bindings: iio: afe: add bindings for temperature-sense-rtd Liam Beguin
2021-08-20 19:17 ` [PATCH v8 14/14] dt-bindings: iio: afe: add bindings for temperature transducers Liam Beguin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=e6815e85-2b0e-cb24-e677-c3324a299b3a@axentia.se \
    --to=peda@axentia.se \
    --cc=devicetree@vger.kernel.org \
    --cc=jic23@kernel.org \
    --cc=lars@metafoo.de \
    --cc=liambeguin@gmail.com \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).