Re: [RFC][PATCH] watchdog: rti-wdt: Provide set_timeout handler to make existing userspace happy

[Guenter Roeck <linux@roeck-us.net>]

On Mon, Sep 13, 2021 at 01:41:43PM +0200, Jan Kiszka wrote:
> From: Jan Kiszka <jan.kiszka@siemens.com>
> 
> Prominent userspace - systemd - cannot handle watchdogs without
> WDIOF_SETTIMEOUT, even if it was configured to the same time as the
> driver selected or was used by firmware to start the watchdog. To avoid
> failing in this case, implement a handler that only fails if a deviating
> set_timeout is requested.
> 
> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>

NACK.

This will need to be fixed in systemd. set_timeout is and will remain
optional.

Guenter

> ---
> 
> See also https://github.com/systemd/systemd/issues/20683
> 
>  drivers/watchdog/rti_wdt.c | 17 ++++++++++++++++-
>  1 file changed, 16 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/watchdog/rti_wdt.c b/drivers/watchdog/rti_wdt.c
> index 359302f71f7e..365255b15a0d 100644
> --- a/drivers/watchdog/rti_wdt.c
> +++ b/drivers/watchdog/rti_wdt.c
> @@ -173,13 +173,27 @@ static unsigned int rti_wdt_get_timeleft_ms(struct watchdog_device *wdd)
>  	return timer_counter;
>  }
>  
> +static int rti_wdt_set_timeout(struct watchdog_device *wdd,
> +			       unsigned int timeout)
> +{
> +	/*
> +	 * Updating the timeout after start is actually not supported, but
> +	 * let's ignore requests for the already configured value. Helps
> +	 * existing userspace such as systemd.
> +	 */
> +	if (timeout != heartbeat)
> +		return -EOPNOTSUPP;
> +
> +	return 0;
> +}
> +
>  static unsigned int rti_wdt_get_timeleft(struct watchdog_device *wdd)
>  {
>  	return rti_wdt_get_timeleft_ms(wdd) / 1000;
>  }
>  
>  static const struct watchdog_info rti_wdt_info = {
> -	.options = WDIOF_KEEPALIVEPING,
> +	.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT,
>  	.identity = "K3 RTI Watchdog",
>  };
>  
> @@ -187,6 +201,7 @@ static const struct watchdog_ops rti_wdt_ops = {
>  	.owner		= THIS_MODULE,
>  	.start		= rti_wdt_start,
>  	.ping		= rti_wdt_ping,
> +	.set_timeout	= rti_wdt_set_timeout,
>  	.get_timeleft	= rti_wdt_get_timeleft,
>  };
>  
> -- 
> 2.31.1