Re: [PATCH v3 6/8] dt-bindings: iio: adc: add bindings doc for AXI ADC driver

["Ardelean, Alexandru" <alexandru.Ardelean@analog.com>]

On Tue, 2020-03-03 at 10:53 -0600, Rob Herring wrote:
> On Thu, Feb 27, 2020 at 10:27:17AM +0200, Alexandru Ardelean wrote:
> > This change adds the bindings documentation for the AXI ADC driver.
> > 
> > Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
> > ---
> >  .../bindings/iio/adc/adi-axi-adc.yaml         | 69 +++++++++++++++++++
> 
> Follow the compatible string: adi,axi-adc.yaml 

ack

> 
> >  1 file changed, 69 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/iio/adc/adi-axi-
> > adc.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/iio/adc/adi-axi-adc.yaml
> > b/Documentation/devicetree/bindings/iio/adc/adi-axi-adc.yaml
> > new file mode 100644
> > index 000000000000..d45d41f4f08e
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/iio/adc/adi-axi-adc.yaml
> > @@ -0,0 +1,69 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/iio/adc/adi-axi-adc.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Analog Devices AXI ADC IP core
> > +
> > +maintainers:
> > +  - Michael Hennerich <michael.hennerich@analog.com>
> > +  - Alexandru Ardelean <alexandru.ardelean@analog.com>
> > +
> > +description: |
> > +  Analog Devices Generic AXI ADC IP core for interfacing an ADC device
> > +  with a high speed serial (JESD204B/C) or source synchronous parallel
> > +  interface (LVDS/CMOS).
> > +  Usually, some other interface type (i.e SPI) is used as a control
> > +  interface for the actual ADC, while this IP core will interface
> > +  to the data-lines of the ADC and handle the streaming of data into
> > +  memory via DMA.
> > +
> > +  https://wiki.analog.com/resources/fpga/docs/axi_adc_ip
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - adi,axi-adc-10.0.a
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  dmas:
> > +    minItems: 1
> > +    maxItems: 1
> 
> Just maxItems is enough.

ack

> 
> > +
> > +  dma-names:
> > +    maxItems: 1
> > +    items:
> > +      - const: rx
> > +
> > +  adi-axi-adc-client:
> 
> adi,axi-adc-client
> 
> Though I think 'adi,adc-dev' would be better name.

works for me
one question though; this still gives:

  CHKDT   Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml
/home/sandu/work/linux/upstream/Documentation/devicetree/bindings/iio/adc/adi,ax
i-adc.yaml: properties:adi,adc-dev: {'description': 'A reference to a the actual
ADC to which this FPGA ADC interfaces to.', 'maxItems': 1} is not valid under
any of the given schemas (Possible causes of the failure):
	/home/sandu/work/linux/upstream/Documentation/devicetree/bindings/iio/ad
c/adi,axi-adc.yaml: properties:adi,adc-dev: 'not' is a required property


Any thoughts?


> 
> > +    description:
> > +      A reference to a the actual ADC to which this FPGA ADC interfaces to.
> > +    maxItems: 1
> > +
> > +required:
> > +  - compatible
> > +  - dmas
> > +  - reg
> > +  - adi-axi-adc-client
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    fpga_axi {
> 
> You can drop this node.

ack

> 
> > +        #address-cells = <1>;
> > +        #size-cells = <1>;
> > +
> > +        axi-adc@44a00000 {
> > +          compatible = "adi,axi-adc-10.0.a";
> > +          reg = <0x44a00000 0x10000>;
> > +          dmas = <&rx_dma 0>;
> > +          dma-names = "rx";
> > +
> > +          adi-axi-adc-client = <&spi_adc>;
> > +        };
> > +    };
> > +...
> > -- 
> > 2.20.1
> >