From: Stanimir Varbanov <stanimir.varbanov@linaro.org> To: Dikshita Agarwal <dikshita@codeaurora.org>, linux-media@vger.kernel.org, stanimir.varbanov@linaro.org Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, vgarodia@codeaurora.org Subject: Re: [PATCH v3 7/7] media: venus: Set buffer to FW based on FW min count requirement. Date: Wed, 28 Jul 2021 17:53:01 +0300 [thread overview] Message-ID: <e85515cc-6213-cdc3-dab8-46ea5eb58011@linaro.org> (raw) In-Reply-To: <1626246068-21023-8-git-send-email-dikshita@codeaurora.org> On 7/14/21 10:01 AM, Dikshita Agarwal wrote: > - Get the min buffer count required by FW from source event change > and use the same value to decide actual buffer count and for > buffer size calculation. > - Setup DPB and OPB buffers after session continue incase of > reconfig. > > Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org> > --- > drivers/media/platform/qcom/venus/core.h | 1 + > drivers/media/platform/qcom/venus/helpers.c | 11 ++++++++++- > drivers/media/platform/qcom/venus/hfi_helper.h | 9 +++++++++ > drivers/media/platform/qcom/venus/hfi_msgs.c | 7 +++++++ > drivers/media/platform/qcom/venus/hfi_plat_bufs_v6.c | 6 ++++-- > drivers/media/platform/qcom/venus/vdec.c | 20 +++++++++++++------- > 6 files changed, 44 insertions(+), 10 deletions(-) > > diff --git a/drivers/media/platform/qcom/venus/core.h b/drivers/media/platform/qcom/venus/core.h > index 1ff20d9..b2b023e 100644 > --- a/drivers/media/platform/qcom/venus/core.h > +++ b/drivers/media/platform/qcom/venus/core.h > @@ -403,6 +403,7 @@ struct venus_inst { > u32 width; > u32 height; > struct v4l2_rect crop; > + u32 fw_min_cnt; > u32 out_width; > u32 out_height; > u32 colorspace; > diff --git a/drivers/media/platform/qcom/venus/helpers.c b/drivers/media/platform/qcom/venus/helpers.c > index ccf188a..ea82cdc 100644 > --- a/drivers/media/platform/qcom/venus/helpers.c > +++ b/drivers/media/platform/qcom/venus/helpers.c > @@ -576,6 +576,7 @@ static int platform_get_bufreq(struct venus_inst *inst, u32 buftype, > struct hfi_plat_buffers_params params; > bool is_dec = inst->session_type == VIDC_SESSION_TYPE_DEC; > struct venc_controls *enc_ctr = &inst->controls.enc; > + int ret = 0; No need to initialize ret to zero. > > hfi_plat = hfi_platform_get(version); > > @@ -610,7 +611,15 @@ static int platform_get_bufreq(struct venus_inst *inst, u32 buftype, > params.enc.is_tenbit = inst->bit_depth == VIDC_BITDEPTH_10; > } > > - return hfi_plat->bufreq(¶ms, inst->session_type, buftype, req); > + if (buftype == HFI_BUFFER_OUTPUT || buftype == HFI_BUFFER_OUTPUT2 || > + buftype == HFI_BUFFER_INTERNAL_SCRATCH_1(version)) Could you add a comment why HFI_BUFFER_INTERNAL_SCRATCH_1 is included in condition and not included in below 'if' condition? > + req->count_min = inst->fw_min_cnt; > + > + ret = hfi_plat->bufreq(¶ms, inst->session_type, buftype, req); > + if (buftype == HFI_BUFFER_OUTPUT || buftype == HFI_BUFFER_OUTPUT2) ^^^^ > + if (inst->fw_min_cnt != req->count_min) > + inst->fw_min_cnt = req->count_min; > + return ret; > } Also in regards to inst->fw_min_cnt, can we pass fw_min_cnt as input to get_bufreq via 'req' structure, i.e. req.count_min = inst->fw_min_cnt; ret = venus_helper_get_bufreq(inst, type, &req); inst->fw_min_cnt = req.count_min ? > > int venus_helper_get_bufreq(struct venus_inst *inst, u32 type, > diff --git a/drivers/media/platform/qcom/venus/hfi_helper.h b/drivers/media/platform/qcom/venus/hfi_helper.h > index 185c302..f2e8fad 100644 > --- a/drivers/media/platform/qcom/venus/hfi_helper.h > +++ b/drivers/media/platform/qcom/venus/hfi_helper.h > @@ -167,6 +167,7 @@ > #define HFI_PROPERTY_PARAM_VDEC_RECOVERY_POINT_SEI_EXTRADATA 0x120300c > #define HFI_PROPERTY_PARAM_VDEC_THUMBNAIL_MODE 0x120300d > #define HFI_PROPERTY_PARAM_VDEC_FRAME_ASSEMBLY 0x120300e > +#define HFI_PROPERTY_PARAM_VDEC_DPB_COUNTS 0x120300e > #define HFI_PROPERTY_PARAM_VDEC_VC1_FRAMEDISP_EXTRADATA 0x1203011 > #define HFI_PROPERTY_PARAM_VDEC_VC1_SEQDISP_EXTRADATA 0x1203012 > #define HFI_PROPERTY_PARAM_VDEC_TIMESTAMP_EXTRADATA 0x1203013 > @@ -906,6 +907,14 @@ struct hfi_extradata_input_crop { > u32 height; > }; > > +struct hfi_dpb_counts { > + u32 max_dpb_count; > + u32 max_ref_frames; > + u32 max_dec_buffering; > + u32 max_reorder_frames; > + u32 fw_min_cnt; > +}; > + > #define HFI_COLOR_FORMAT_MONOCHROME 0x01 > #define HFI_COLOR_FORMAT_NV12 0x02 > #define HFI_COLOR_FORMAT_NV21 0x03 > diff --git a/drivers/media/platform/qcom/venus/hfi_msgs.c b/drivers/media/platform/qcom/venus/hfi_msgs.c > index a2d436d..ed005d6 100644 > --- a/drivers/media/platform/qcom/venus/hfi_msgs.c > +++ b/drivers/media/platform/qcom/venus/hfi_msgs.c > @@ -32,6 +32,7 @@ static void event_seq_changed(struct venus_core *core, struct venus_inst *inst, > struct hfi_colour_space *colour_info; > struct hfi_buffer_requirements *bufreq; > struct hfi_extradata_input_crop *crop; > + struct hfi_dpb_counts *dpb_count; > u8 *data_ptr; > u32 ptype; > > @@ -110,6 +111,12 @@ static void event_seq_changed(struct venus_core *core, struct venus_inst *inst, > event.input_crop.height = crop->height; > data_ptr += sizeof(*crop); > break; > + case HFI_PROPERTY_PARAM_VDEC_DPB_COUNTS: > + data_ptr += sizeof(u32); > + dpb_count = (struct hfi_dpb_counts *)data_ptr; > + event.buf_count = dpb_count->fw_min_cnt; > + data_ptr += sizeof(*dpb_count); > + break; > default: > break; > } > diff --git a/drivers/media/platform/qcom/venus/hfi_plat_bufs_v6.c b/drivers/media/platform/qcom/venus/hfi_plat_bufs_v6.c > index 479178b..ea25c45 100644 > --- a/drivers/media/platform/qcom/venus/hfi_plat_bufs_v6.c > +++ b/drivers/media/platform/qcom/venus/hfi_plat_bufs_v6.c > @@ -1164,7 +1164,7 @@ static int output_buffer_count(u32 session_type, u32 codec) > output_min_count = 6; > break; > case V4L2_PIX_FMT_VP9: > - output_min_count = 9; > + output_min_count = 11; > break; > case V4L2_PIX_FMT_H264: > case V4L2_PIX_FMT_HEVC: > @@ -1213,6 +1213,8 @@ static int bufreq_dec(struct hfi_plat_buffers_params *params, u32 buftype, > } > > out_min_count = output_buffer_count(VIDC_SESSION_TYPE_DEC, codec); > + /* Max of driver and FW count */ > + out_min_count = max(out_min_count, bufreq->count_min); > > bufreq->type = buftype; > bufreq->region_size = 0; > @@ -1237,7 +1239,7 @@ static int bufreq_dec(struct hfi_plat_buffers_params *params, u32 buftype, > } else if (buftype == HFI_BUFFER_INTERNAL_SCRATCH(version)) { > bufreq->size = dec_ops->scratch(width, height, is_interlaced); > } else if (buftype == HFI_BUFFER_INTERNAL_SCRATCH_1(version)) { > - bufreq->size = dec_ops->scratch1(width, height, out_min_count, > + bufreq->size = dec_ops->scratch1(width, height, VB2_MAX_FRAME, > is_secondary_output, > num_vpp_pipes); > } else if (buftype == HFI_BUFFER_INTERNAL_PERSIST_1) { > diff --git a/drivers/media/platform/qcom/venus/vdec.c b/drivers/media/platform/qcom/venus/vdec.c > index 892be8d..3e91d8c 100644 > --- a/drivers/media/platform/qcom/venus/vdec.c > +++ b/drivers/media/platform/qcom/venus/vdec.c > @@ -988,23 +988,23 @@ static int vdec_start_capture(struct venus_inst *inst) > if (ret) > goto err; > > + venus_pm_load_scale(inst); > + > + inst->next_buf_last = false; > + > ret = venus_helper_alloc_dpb_bufs(inst); > if (ret) > goto err; > > - ret = venus_helper_queue_dpb_bufs(inst); > + ret = hfi_session_continue(inst); > if (ret) > goto free_dpb_bufs; > > - ret = venus_helper_process_initial_cap_bufs(inst); > + ret = venus_helper_queue_dpb_bufs(inst); > if (ret) > goto free_dpb_bufs; > > - venus_pm_load_scale(inst); > - > - inst->next_buf_last = false; > - > - ret = hfi_session_continue(inst); > + ret = venus_helper_process_initial_cap_bufs(inst); > if (ret) > goto free_dpb_bufs; > > @@ -1411,6 +1411,11 @@ static void vdec_event_change(struct venus_inst *inst, > inst->crop.height = ev_data->height; > } > > + inst->fw_min_cnt = ev_data->buf_count; > + //overwriting this to 11 for vp9 due to fw bug Please use C style for comments > + if(inst->hfi_codec == HFI_VIDEO_CODEC_VP9) Space after if: if (condition) > + inst->fw_min_cnt = 11; > + > inst->out_width = ev_data->width; > inst->out_height = ev_data->height; > > @@ -1514,6 +1519,7 @@ static void vdec_inst_init(struct venus_inst *inst) > inst->crop.top = 0; > inst->crop.width = inst->width; > inst->crop.height = inst->height; > + inst->fw_min_cnt = 8; > inst->out_width = frame_width_min(inst); > inst->out_height = frame_height_min(inst); > inst->fps = 30; > -- regards, Stan
next prev parent reply other threads:[~2021-07-28 14:53 UTC|newest] Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-07-14 7:01 [PATCH v3 0/7] media: venus: Enable venus support on sc7280 Dikshita Agarwal 2021-07-14 7:01 ` [PATCH v3 1/7] venus: firmware: enable no tz fw loading for sc7280 Dikshita Agarwal 2021-07-14 7:01 ` [PATCH v3 2/7] media: venus: core: Add sc7280 DT compatible and resource data Dikshita Agarwal 2021-07-14 7:01 ` [PATCH v3 3/7] media: venus: Add num_vpp_pipes to resource structure Dikshita Agarwal 2021-07-14 7:01 ` [PATCH v3 4/7] media: venus: hfi: Skip AON register programming for V6 1pipe Dikshita Agarwal 2021-07-14 7:01 ` [PATCH v3 5/7] venus: vdec: set work route to fw Dikshita Agarwal 2021-07-14 7:01 ` [PATCH v3 6/7] media: venus: helpers: update NUM_MBS macro calculation Dikshita Agarwal 2021-07-14 7:01 ` [PATCH v3 7/7] media: venus: Set buffer to FW based on FW min count requirement Dikshita Agarwal 2021-07-28 14:53 ` Stanimir Varbanov [this message] 2021-08-02 7:50 ` dikshita 2021-08-03 8:00 ` Stanimir Varbanov 2021-07-28 9:52 ` [PATCH v3 0/7] media: venus: Enable venus support on sc7280 Stanimir Varbanov
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=e85515cc-6213-cdc3-dab8-46ea5eb58011@linaro.org \ --to=stanimir.varbanov@linaro.org \ --cc=dikshita@codeaurora.org \ --cc=linux-arm-msm@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-media@vger.kernel.org \ --cc=vgarodia@codeaurora.org \ --subject='Re: [PATCH v3 7/7] media: venus: Set buffer to FW based on FW min count requirement.' \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).