linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Roger Quadros <rogerq@ti.com>
To: Robin Murphy <robin.murphy@arm.com>,
	Rob Herring <robh+dt@kernel.org>, Christoph Hellwig <hch@lst.de>
Cc: "Péter Ujfalusi" <peter.ujfalusi@ti.com>,
	"Murali Karicheri" <m-karicheri2@ti.com>,
	"Nori, Sekhar" <nsekhar@ti.com>, "Anna, Suman" <s-anna@ti.com>,
	"Stefan Wahren" <stefan.wahren@i2se.com>,
	"Andreas Färber" <afaerber@suse.de>,
	"Hans Verkuil" <hverkuil@xs4all.nl>,
	devicetree@vger.kernel.org,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"Nishanth Menon" <nm@ti.com>,
	"hdegoede@redhat.com" <hdegoede@redhat.com>,
	"Vignesh Raghavendra" <vigneshr@ti.com>
Subject: Re: dma_mask limited to 32-bits with OF platform device
Date: Tue, 3 Mar 2020 10:27:04 +0200	[thread overview]
Message-ID: <e898cf0a-6f52-8550-c73e-b78bc413bcc7@ti.com> (raw)
In-Reply-To: <3d8ea578-2ecb-1126-3bf0-2dc695687245@ti.com>

Robin, Christoph,

On 26/02/2020 13:33, Roger Quadros wrote:
> Hi,
> 
> On 19/02/2020 17:25, Robin Murphy wrote:
>> On 19/02/2020 2:29 pm, Roger Quadros wrote:
>>> Rob,
>>>
>>> On 18/02/2020 19:22, Rob Herring wrote:
>>>> On Tue, Feb 18, 2020 at 2:28 AM Roger Quadros <rogerq@ti.com> wrote:
>>>>>
>>>>> Chrishtoph,
>>>>>
>>>>> The branch works fine for SATA on DRA7 with CONFIG_LPAE once I
>>>>> have the below DT fix.
>>>>>
>>>>> Do you intend to send these fixes to -stable?
>>>>>
>>>>> ------------------------- arch/arm/boot/dts/dra7.dtsi -------------------------
>>>>> index d78b684e7fca..853ecf3cfb37 100644
>>>>> @@ -645,6 +645,8 @@
>>>>>                  sata: sata@4a141100 {
>>>>>                          compatible = "snps,dwc-ahci";
>>>>>                          reg = <0x4a140000 0x1100>, <0x4a141100 0x7>;
>>>>> +                       #size-cells = <2>;
>>>>> +                       dma-ranges = <0x00000000 0x00000000 0x1 0x00000000>;
>>>>
>>>> dma-ranges should be in the parent (bus) node, not the device node.
>>>
>>> I didn't understand why.
>>>
>>> There are many devices on the parent bus node and all devices might not have the 32-bit DMA limit
>>> the SATA controller has.
>>>
>>> SATA controller is the bus master and the ATA devices are children of the SATA controller.
>>
>> But SATA is not a memory-mapped bus - in the context of MMIO, the AHCI is the bus-master device, not a bridge or level of interconnect. The DeviceTree spec[1] clearly defines dma-ranges as an address translation between a "parent bus" and a "child bus".
>>
>> If in the worst case this address-limited interconnect really only exists between the AHCI's master interface and everything else in the system, then you'll have to describe it explicitly to meet DT's expectation of a "bus" (e.g. [2]). Yes, it's a bit clunky, but any scheme has its edge cases.
>>
>>>  From Documentation/devicetree/booting-without-of.txt
>>>
>>> * DMA Bus master
>>> Optional property:
>>> - dma-ranges: <prop-encoded-array> encoded as arbitrary number of triplets of
>>>          (child-bus-address, parent-bus-address, length). Each triplet specified
>>>          describes a contiguous DMA address range.
>>>          The dma-ranges property is used to describe the direct memory access (DMA)
>>>          structure of a memory-mapped bus whose device tree parent can be accessed
>>>          from DMA operations originating from the bus. It provides a means of
>>>          defining a mapping or translation between the physical address space of
>>>          the bus and the physical address space of the parent of the bus.
>>>          (for more information see the Devicetree Specification)
>>>
>>> * DMA Bus child
>>> Optional property:
>>> - dma-ranges: <empty> value. if present - It means that DMA addresses
>>>          translation has to be enabled for this device.
>>
>> Disregarding that this was apparently never in ePAPR, so not grandfathered in to DTSpec, and effectively nobody ever has actually followed it (oh, if only...), note "<empty>" - that still doesn't imply that a *non-empty* dma-ranges would be valid on device nodes.
>>
>> Robin.
>>
>> [1] https://www.devicetree.org/specifications/
>> [2] https://lore.kernel.org/lkml/20181010120737.30300-20-laurentiu.tudor@nxp.com/
> 
> With the patch (in the end). dev->bus_dma_limit is still set to 0 and so is not being used.
> 
> from of_dma_configure()
>          ret = of_dma_get_range(np, &dma_addr, &paddr, &size);
> ...
>          /* ...but only set bus limit if we found valid dma-ranges earlier */
>          if (!ret)
>                  dev->bus_dma_limit = end;
> 
> There is no other place bus_dma_limit is set. Looks like every device should inherit that
> from it's parent right?

Any ideas how to expect this to work?

> 
> diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
> index 64a0f90f5b52..5418c31d4da7 100644
> --- a/arch/arm/boot/dts/dra7.dtsi
> +++ b/arch/arm/boot/dts/dra7.dtsi
> @@ -680,15 +680,22 @@
>           };
> 
>           /* OCP2SCP3 */
> -        sata: sata@4a141100 {
> -            compatible = "snps,dwc-ahci";
> -            reg = <0x4a140000 0x1100>, <0x4a141100 0x7>;
> -            interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
> -            phys = <&sata_phy>;
> -            phy-names = "sata-phy";
> -            clocks = <&l3init_clkctrl DRA7_L3INIT_SATA_CLKCTRL 8>;
> -            ti,hwmods = "sata";
> -            ports-implemented = <0x1>;
> +        sata_aux_bus {
> +            #address-cells = <2>;
> +            #size-cells = <2>;
> +            compatible = "simple-bus";
> +            ranges = <0x0 0x0 0x4a140000 0x0 0x1200>;
> +            dma-ranges = <0x0 0x0 0x0 0x0 0x1 0x00000000>;
> +            sata: sata@4a141100 {
> +                compatible = "snps,dwc-ahci";
> +                reg = <0x0 0x0 0x0 0x1100>, <0x0 0x1100 0x0 0x7>;
> +                interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
> +                phys = <&sata_phy>;
> +                phy-names = "sata-phy";
> +                clocks = <&l3init_clkctrl DRA7_L3INIT_SATA_CLKCTRL 8>;
> +                ti,hwmods = "sata";
> +                ports-implemented = <0x1>;
> +            };
>           };
> 
>           /* OCP2SCP1 */
> 

-- 
cheers,
-roger
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

  reply	other threads:[~2020-03-03  8:27 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-12 10:49 Roger Quadros
2020-02-12 11:37 ` Robin Murphy
2020-02-12 12:33   ` Roger Quadros
2020-02-12 14:04     ` Robin Murphy
2020-02-12 17:57       ` Christoph Hellwig
2020-02-17 13:21       ` Christoph Hellwig
2020-02-17 14:54         ` Peter Ujfalusi
2020-02-18  7:26           ` Peter Ujfalusi
2020-02-18  8:28         ` Roger Quadros
2020-02-18 17:22           ` Rob Herring
2020-02-19 14:29             ` Roger Quadros
2020-02-19 15:25               ` Robin Murphy
2020-02-19 15:40                 ` Roger Quadros
2020-02-26 11:33                 ` Roger Quadros
2020-03-03  8:27                   ` Roger Quadros [this message]
2020-03-03 14:06                     ` Robin Murphy
2020-03-03 19:26                       ` Rob Herring
2020-03-04  8:28                         ` Roger Quadros

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=e898cf0a-6f52-8550-c73e-b78bc413bcc7@ti.com \
    --to=rogerq@ti.com \
    --cc=afaerber@suse.de \
    --cc=devicetree@vger.kernel.org \
    --cc=hch@lst.de \
    --cc=hdegoede@redhat.com \
    --cc=hverkuil@xs4all.nl \
    --cc=linux-kernel@vger.kernel.org \
    --cc=m-karicheri2@ti.com \
    --cc=nm@ti.com \
    --cc=nsekhar@ti.com \
    --cc=peter.ujfalusi@ti.com \
    --cc=robh+dt@kernel.org \
    --cc=robin.murphy@arm.com \
    --cc=s-anna@ti.com \
    --cc=stefan.wahren@i2se.com \
    --cc=vigneshr@ti.com \
    --subject='Re: dma_mask limited to 32-bits with OF platform device' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).