From: Guo Ren <ren_guo@c-sky.com>
To: linux-arch@vger.kernel.org, linux-kernel@vger.kernel.org,
tglx@linutronix.de, daniel.lezcano@linaro.org,
jason@lakedaemon.net, arnd@arndb.de, devicetree@vger.kernel.org,
andrea.parri@amarulasolutions.com, peterz@infradead.org
Cc: c-sky_gcc_upstream@c-sky.com, gnu-csky@mentor.com,
thomas.petazzoni@bootlin.com, wbx@uclibc-ng.org,
ren_guo@c-sky.com, green.hu@gmail.com
Subject: [PATCH V3 03/27] csky: Kernel booting
Date: Wed, 12 Sep 2018 21:24:37 +0800 [thread overview]
Message-ID: <e926dbffaad43375470cba2b1c51b8ba38c64dbb.1536757532.git.ren_guo@c-sky.com> (raw)
In-Reply-To: <cover.1536757532.git.ren_guo@c-sky.com>
In-Reply-To: <cover.1536757532.git.ren_guo@c-sky.com>
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
---
arch/csky/kernel/head.S | 78 +++++++++++++++++++++
arch/csky/kernel/setup.c | 150 +++++++++++++++++++++++++++++++++++++++++
arch/csky/kernel/vmlinux.lds.S | 64 ++++++++++++++++++
3 files changed, 292 insertions(+)
create mode 100644 arch/csky/kernel/head.S
create mode 100644 arch/csky/kernel/setup.c
create mode 100644 arch/csky/kernel/vmlinux.lds.S
diff --git a/arch/csky/kernel/head.S b/arch/csky/kernel/head.S
new file mode 100644
index 0000000..80bb9c6
--- /dev/null
+++ b/arch/csky/kernel/head.S
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2018 Hangzhou C-SKY Microsystems co.,ltd.
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/page.h>
+#include <abi/entry.h>
+
+__HEAD
+ENTRY(_start)
+ /* set super user mode */
+ lrw a3, DEFAULT_PSR_VALUE
+ mtcr a3, psr
+ psrset ee
+
+ SETUP_MMU a3
+
+ /* set stack point */
+ lrw a3, init_thread_union + THREAD_SIZE
+ mov sp, a3
+
+ jmpi csky_start
+END(_start)
+
+#ifdef CONFIG_SMP
+.align 10
+ENTRY(_start_smp_secondary)
+ /* Invalid I/Dcache BTB BHT */
+ movi a3, 7
+ lsli a3, 16
+ addi a3, (1<<4) | 3
+ mtcr a3, cr17
+
+ tlbi.alls
+
+ /* setup PAGEMASK */
+ movi a3, 0
+ mtcr a3, cr<6, 15>
+
+ /* setup MEL0/MEL1 */
+ grs a0, _start_smp_pc
+_start_smp_pc:
+ bmaski a1, 13
+ andn a0, a1
+ movi a1, 0x00000006
+ movi a2, 0x00001006
+ or a1, a0
+ or a2, a0
+ mtcr a1, cr<2, 15>
+ mtcr a2, cr<3, 15>
+
+ /* setup MEH */
+ mtcr a0, cr<4, 15>
+
+ /* write TLB */
+ bgeni a3, 28
+ mtcr a3, cr<8, 15>
+
+ SETUP_MMU a3
+
+ /* enable MMU */
+ movi a3, 1
+ mtcr a3, cr18
+
+ jmpi _goto_mmu_on
+_goto_mmu_on:
+ lrw a3, DEFAULT_PSR_VALUE
+ mtcr a3, psr
+ psrset ee
+
+ /* set stack point */
+ lrw a3, secondary_stack
+ ld.w a3, (a3, 0)
+ mov sp, a3
+
+ jmpi csky_start_secondary
+END(_start_smp_secondary)
+#endif
diff --git a/arch/csky/kernel/setup.c b/arch/csky/kernel/setup.c
new file mode 100644
index 0000000..44606fa
--- /dev/null
+++ b/arch/csky/kernel/setup.c
@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2018 Hangzhou C-SKY Microsystems co.,ltd.
+#include <linux/console.h>
+#include <linux/memblock.h>
+#include <linux/bootmem.h>
+#include <linux/initrd.h>
+#include <linux/of.h>
+#include <linux/of_fdt.h>
+#include <linux/start_kernel.h>
+#include <linux/dma-contiguous.h>
+#include <asm/sections.h>
+#include <asm/mmu_context.h>
+#include <asm/pgalloc.h>
+
+phys_addr_t __init_memblock memblock_end_of_REG0(void)
+{
+ return (memblock.memory.regions[0].base + memblock.memory.regions[0].size);
+}
+
+phys_addr_t __init_memblock memblock_start_of_REG1(void)
+{
+ return memblock.memory.regions[1].base;
+}
+
+size_t __init_memblock memblock_size_of_REG1(void)
+{
+ return memblock.memory.regions[1].size;
+}
+
+static void __init csky_memblock_init(void)
+{
+ unsigned long zone_size[MAX_NR_ZONES];
+ unsigned long zhole_size[MAX_NR_ZONES];
+ signed long size;
+
+ memblock_reserve(__pa(_stext), _end - _stext);
+#ifdef CONFIG_BLK_DEV_INITRD
+ memblock_reserve(__pa(initrd_start), initrd_end - initrd_start);
+#endif
+
+ early_init_fdt_reserve_self();
+ early_init_fdt_scan_reserved_mem();
+
+ memblock_dump_all();
+
+ memset(zone_size, 0, sizeof(zone_size));
+ memset(zhole_size, 0, sizeof(zhole_size));
+
+ min_low_pfn = PFN_UP(memblock_start_of_DRAM());
+ max_pfn = PFN_DOWN(memblock_end_of_DRAM());
+
+ max_low_pfn = PFN_UP(memblock_end_of_REG0());
+ if (max_low_pfn == 0)
+ max_low_pfn = max_pfn;
+
+ size = max_pfn - min_low_pfn;
+
+ if (memblock.memory.cnt > 1) {
+ zone_size[ZONE_NORMAL] = PFN_DOWN(memblock_start_of_REG1()) - min_low_pfn;
+ zhole_size[ZONE_NORMAL] = PFN_DOWN(memblock_start_of_REG1()) - max_low_pfn;
+ } else {
+ if (size <= PFN_DOWN(LOWMEM_LIMIT - PHYS_OFFSET_OFFSET))
+ zone_size[ZONE_NORMAL] = max_pfn - min_low_pfn;
+ else {
+ zone_size[ZONE_NORMAL] = PFN_DOWN(LOWMEM_LIMIT - PHYS_OFFSET_OFFSET);
+ max_low_pfn = min_low_pfn + zone_size[ZONE_NORMAL];
+ }
+ }
+
+#ifdef CONFIG_HIGHMEM
+ size = 0;
+ if(memblock.memory.cnt > 1) {
+ size = PFN_DOWN(memblock_size_of_REG1());
+ highstart_pfn = PFN_DOWN(memblock_start_of_REG1());
+ } else {
+ size = max_pfn - min_low_pfn - PFN_DOWN(LOWMEM_LIMIT - PHYS_OFFSET_OFFSET);
+ highstart_pfn = min_low_pfn + PFN_DOWN(LOWMEM_LIMIT - PHYS_OFFSET_OFFSET);
+ }
+
+ if (size > 0)
+ zone_size[ZONE_HIGHMEM] = size;
+
+ highend_pfn = max_pfn;
+#endif
+ memblock_set_current_limit(PFN_PHYS(max_low_pfn));
+
+ dma_contiguous_reserve(0);
+
+ free_area_init_node(0, zone_size, min_low_pfn, zhole_size);
+}
+
+void __init setup_arch(char **cmdline_p)
+{
+ *cmdline_p = boot_command_line;
+
+ console_verbose();
+
+ pr_info("C-SKY: https://github.com/c-sky/csky-linux\n");
+ pr_info("Phys. mem: %ldMB\n", (unsigned long) memblock_phys_mem_size()/1024/1024);
+
+ init_mm.start_code = (unsigned long) _stext;
+ init_mm.end_code = (unsigned long) _etext;
+ init_mm.end_data = (unsigned long) _edata;
+ init_mm.brk = (unsigned long) _end;
+
+ parse_early_param();
+
+ csky_memblock_init();
+
+ unflatten_and_copy_device_tree();
+
+#ifdef CONFIG_SMP
+ setup_smp();
+#endif
+
+ sparse_init();
+
+#ifdef CONFIG_HIGHMEM
+ kmap_init();
+#endif
+
+#if defined(CONFIG_VT) && defined(CONFIG_DUMMY_CONSOLE)
+ conswitchp = &dummy_con;
+#endif
+}
+
+extern void pre_trap_init(void);
+extern void pre_mmu_init(void);
+
+asmlinkage __visible void __init csky_start(
+ unsigned int unused,
+ void * param
+ )
+{
+ /* Clean up bss section */
+ memset(__bss_start, 0, __bss_stop - __bss_start);
+
+ pre_trap_init();
+ pre_mmu_init();
+
+#ifdef CONFIG_CSKY_BUILTIN_DTB
+ pr_info("Use builtin dtb\n");
+ early_init_dt_scan(__dtb_start);
+#else
+ early_init_dt_scan(param);
+#endif
+ start_kernel();
+
+ while(1);
+}
diff --git a/arch/csky/kernel/vmlinux.lds.S b/arch/csky/kernel/vmlinux.lds.S
new file mode 100644
index 0000000..249c14f
--- /dev/null
+++ b/arch/csky/kernel/vmlinux.lds.S
@@ -0,0 +1,64 @@
+#include <asm/vmlinux.lds.h>
+#include <asm/page.h>
+
+OUTPUT_ARCH(csky)
+ENTRY(_start)
+
+#ifndef __cskyBE__
+jiffies = jiffies_64;
+#else
+jiffies = jiffies_64 + 4;
+#endif
+
+#define VBR_BASE \
+ . = ALIGN(1024); \
+ VMLINUX_SYMBOL(vec_base) = .; \
+ . += 512;
+
+SECTIONS
+{
+ . = PAGE_OFFSET + PHYS_OFFSET_OFFSET;
+
+ _stext = .;
+ __init_begin = .;
+ HEAD_TEXT_SECTION
+ INIT_TEXT_SECTION(PAGE_SIZE)
+ INIT_DATA_SECTION(PAGE_SIZE)
+ PERCPU_SECTION(L1_CACHE_BYTES)
+ . = ALIGN(PAGE_SIZE);
+ __init_end = .;
+
+ .text : AT(ADDR(.text) - LOAD_OFFSET) {
+ _text = .;
+ IRQENTRY_TEXT
+ SOFTIRQENTRY_TEXT
+ TEXT_TEXT
+ SCHED_TEXT
+ CPUIDLE_TEXT
+ LOCK_TEXT
+ KPROBES_TEXT
+ *(.fixup)
+ *(.gnu.warning)
+ } = 0
+ _etext = .;
+
+ /* __init_begin __init_end must be page aligned for free_initmem */
+ . = ALIGN(PAGE_SIZE);
+
+
+ _sdata = .;
+ RO_DATA_SECTION(PAGE_SIZE)
+ RW_DATA_SECTION(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
+ _edata = .;
+
+ NOTES
+ EXCEPTION_TABLE(L1_CACHE_BYTES)
+ BSS_SECTION(L1_CACHE_BYTES, PAGE_SIZE, L1_CACHE_BYTES)
+ VBR_BASE
+ _end = . ;
+
+ STABS_DEBUG
+ DWARF_DEBUG
+
+ DISCARDS
+}
--
2.7.4
next prev parent reply other threads:[~2018-09-12 13:25 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-12 13:24 [PATCH V4 00/27] C-SKY(csky) Linux Kernel Port Guo Ren
2018-09-12 13:24 ` [PATCH V3 01/27] csky: Build infrastructure Guo Ren
2018-09-12 13:24 ` [PATCH V3 02/27] csky: defconfig Guo Ren
2018-09-12 13:24 ` Guo Ren [this message]
2018-09-12 13:24 ` [PATCH V3 04/27] csky: Exception handling Guo Ren
2018-09-12 13:24 ` [PATCH V3 05/27] csky: System Call Guo Ren
2018-09-12 13:24 ` [PATCH V3 06/27] csky: Cache and TLB routines Guo Ren
2018-09-12 13:24 ` [PATCH V3 07/27] csky: MMU and page table management Guo Ren
2018-09-12 13:24 ` [PATCH V3 08/27] csky: Process management and Signal Guo Ren
2018-09-12 13:24 ` [PATCH V3 09/27] csky: VDSO and rt_sigreturn Guo Ren
2018-09-12 13:24 ` [PATCH V3 10/27] csky: IRQ handling Guo Ren
2018-09-12 13:24 ` [PATCH V3 12/27] csky: ELF and module probe Guo Ren
2018-09-12 13:24 ` [PATCH V3 13/27] csky: Library functions Guo Ren
2018-09-12 13:24 ` [PATCH V3 14/27] csky: User access Guo Ren
2018-09-12 13:24 ` [PATCH V3 15/27] csky: Debug and Ptrace GDB Guo Ren
2018-09-12 13:24 ` [PATCH V3 16/27] csky: SMP support Guo Ren
2018-09-12 13:24 ` [PATCH V3 18/27] dt-bindings: csky CPU Bindings Guo Ren
2018-09-12 13:24 ` [PATCH V3 19/27] dt-bindings: timer: gx6605s SOC timer Guo Ren
2018-09-12 13:24 ` [PATCH V3 20/27] dt-bindings: timer: C-SKY Multi-processor timer Guo Ren
2018-09-12 13:24 ` [PATCH V3 22/27] dt-bindings: interrupt-controller: C-SKY SMP intc Guo Ren
2018-09-12 13:24 ` [PATCH V3 23/27] clocksource: add gx6605s SOC system timer Guo Ren
[not found] ` <abb46d366b513b814f7af234d560306a818b7324.1536757532.git.ren_guo@c-sky.com>
2018-09-12 14:22 ` [PATCH V3 17/27] csky: Misc headers Arnd Bergmann
2018-09-12 14:30 ` [PATCH V4 00/27] C-SKY(csky) Linux Kernel Port Arnd Bergmann
2018-09-14 14:37 ` Guo Ren
2018-09-14 14:46 ` Arnd Bergmann
2018-09-14 16:02 ` Guo Ren
2018-09-14 16:09 ` Arnd Bergmann
2018-09-14 23:28 ` Guo Ren
2018-09-20 17:52 ` Palmer Dabbelt
2018-09-21 5:18 ` Arnd Bergmann
2018-09-21 23:48 ` Guo Ren
2018-09-24 7:21 ` Geert Uytterhoeven
2018-09-24 8:47 ` Arnd Bergmann
2018-09-16 1:07 ` Guo Ren
2018-09-16 4:53 ` Guo Ren
2018-09-17 11:54 ` Stephen Rothwell
2018-09-17 12:03 ` Stephen Rothwell
2018-09-17 14:50 ` Guo Ren
2018-09-17 14:37 ` Guo Ren
[not found] ` <93e8b592e429c156ad4d4ca5d85ef48fd0ab8b70.1536757532.git.ren_guo@c-sky.com>
2018-09-12 15:55 ` [PATCH V3 11/27] csky: Atomic operations Peter Zijlstra
2018-09-15 14:55 ` Guo Ren
2018-09-17 8:17 ` Peter Zijlstra
2018-09-17 15:05 ` Guo Ren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e926dbffaad43375470cba2b1c51b8ba38c64dbb.1536757532.git.ren_guo@c-sky.com \
--to=ren_guo@c-sky.com \
--cc=andrea.parri@amarulasolutions.com \
--cc=arnd@arndb.de \
--cc=c-sky_gcc_upstream@c-sky.com \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=gnu-csky@mentor.com \
--cc=green.hu@gmail.com \
--cc=jason@lakedaemon.net \
--cc=linux-arch@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=peterz@infradead.org \
--cc=tglx@linutronix.de \
--cc=thomas.petazzoni@bootlin.com \
--cc=wbx@uclibc-ng.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).