From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751944AbcF0G2R (ORCPT ); Mon, 27 Jun 2016 02:28:17 -0400 Received: from mx0a-0016f401.pphosted.com ([67.231.148.174]:50883 "EHLO mx0a-0016f401.pphosted.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751601AbcF0G2O (ORCPT ); Mon, 27 Jun 2016 02:28:14 -0400 From: Amitkumar Karwar To: Jeffy Chen , "linux-bluetooth@vger.kernel.org" CC: "linux-kernel@vger.kernel.org" , "Ganapathi Bhat" , Cathy Luo Subject: RE: [v11,3/3] Bluetooth: hci_uart: Support firmware download for Marvell Thread-Topic: [v11,3/3] Bluetooth: hci_uart: Support firmware download for Marvell Thread-Index: AQHRzd2OqwCoMAiL9Uyv+3sUJB87hZ/83aqQ Date: Mon, 27 Jun 2016 06:28:10 +0000 Message-ID: References: <1462548714-7971-3-git-send-email-akarwar@marvell.com> <576CCCDE.1050004@rock-chips.com> In-Reply-To: <576CCCDE.1050004@rock-chips.com> Accept-Language: en-US Content-Language: en-US X-MS-Has-Attach: X-MS-TNEF-Correlator: x-ms-exchange-transport-fromentityheader: Hosted x-originating-ip: [10.93.176.43] Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10432:,, definitions=2016-06-27_03:,, signatures=0 X-Proofpoint-Details: rule=outbound_notspam policy=outbound score=0 spamscore=0 suspectscore=0 malwarescore=0 phishscore=0 adultscore=0 bulkscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.0.1-1604210000 definitions=main-1606270073 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Transfer-Encoding: 8bit X-MIME-Autoconverted: from base64 to 8bit by mail.home.local id u5R6SMv6002781 Hi Marcel, > From: Jeffy Chen [mailto:jeffy.chen@rock-chips.com] > Sent: Friday, June 24, 2016 11:32 AM > To: Amitkumar Karwar; linux-bluetooth@vger.kernel.org > Cc: linux-kernel@vger.kernel.org; Ganapathi Bhat > Subject: Re: [v11,3/3] Bluetooth: hci_uart: Support firmware download > for Marvell > > On 2016-5-6 23:31, Amitkumar Karwar wrote: > > From: Ganapathi Bhat > > > > This patch implement firmware download feature for Marvell Bluetooth > > devices. If firmware is already downloaded, it will skip downloading. > > > > Signed-off-by: Ganapathi Bhat > > Signed-off-by: Amitkumar Karwar > > --- > > v2: Fixed compilation warning reported by kbuild test robot > > v3: Addressed review comments from Marcel Holtmann > > a) Removed vendor specific code from hci_ldisc.c > > b) Get rid of static forward declaration > > c) Removed unnecessary heavy nesting > > d) Git rid of module parameter and global variables > > e) Add logic to pick right firmware image > > v4: Addresses review comments from Alan > > a) Use existing kernel helper APIs instead of writing own. > > b) Replace mdelay() with msleep() > > v5: Addresses review comments from Loic Poulain > > a) Use bt_dev_err/warn/dbg helpers insted of BT_ERR/WARN/DBG > > b) Used static functions where required and removed forward > delcarations > > c) Edited comments for the function hci_uart_recv_data > > d) Made HCI_UART_DNLD_FW flag a part of driver private data > > v6: Addresses review comments from Loic Poulain > > a) Used skb instead of array to store firmware data during > download > > b) Used hci_uart_tx_wakeup and enqueued packets instead of tty > write > > c) Used GFP_KERNEL instead of GFP_ATOMIC > > v7: Edited Kconfig to add dependency for BT_HCIUART_H4. The change > resolves > > errors reported by kbuild test robot. > > v8: Addressed review comments from Marcel Holtmann > > a) Removed unnecessary memory allocation failure messages > > b) Get rid of btmrvl.h header file and add definitions in > > hci_mrvl.c file > > v9: Addressed review comments from Marcel Holtmann > > a) Moved firmware download code from setup to prepare handler. > > b) Change messages from bt_dev_*->BT_*, as hdev isn't available > during firmware > > download. > > v10: Addressed review comments from Marcel Holtmann > > a) Added new callback recv_for_prepare to receive data from > device > > during prepare phase > > b) Avoided using private flags (HCI_UART_DNLD_FW) as new receive > callback is > > added for the same purpose > > c) Used kernel API to handle unaligned data > > d) Moved mrvl_set_baud functionality inside setup callback > > v11: Write data through ldisc in mrvl_send_ack() instead of directly > calling > > write method(One Thousand Gnomes). > > --- > > drivers/bluetooth/Kconfig | 11 + > > drivers/bluetooth/Makefile | 1 + > > drivers/bluetooth/hci_ldisc.c | 6 + > > drivers/bluetooth/hci_mrvl.c | 543 > ++++++++++++++++++++++++++++++++++++++++++ > > drivers/bluetooth/hci_uart.h | 8 +- > > 5 files changed, 568 insertions(+), 1 deletion(-) > > create mode 100644 drivers/bluetooth/hci_mrvl.c > > > > diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig > > index cf50fd2..daafd0c 100644 > > --- a/drivers/bluetooth/Kconfig > > +++ b/drivers/bluetooth/Kconfig > > @@ -180,6 +180,17 @@ config BT_HCIUART_AG6XX > > > > Say Y here to compile support for Intel AG6XX protocol. > > > > +config BT_HCIUART_MRVL > > + bool "Marvell protocol support" > > + depends on BT_HCIUART > > + select BT_HCIUART_H4 > > + help > > + Marvell is serial protocol for communication between Bluetooth > > + device and host. This protocol is required for most Marvell > Bluetooth > > + devices with UART interface. > > + > > + Say Y here to compile support for HCI MRVL protocol. > > + > > config BT_HCIBCM203X > > tristate "HCI BCM203x USB driver" > > depends on USB > > diff --git a/drivers/bluetooth/Makefile b/drivers/bluetooth/Makefile > > index 9c18939..364dbb6 100644 > > --- a/drivers/bluetooth/Makefile > > +++ b/drivers/bluetooth/Makefile > > @@ -37,6 +37,7 @@ hci_uart-$(CONFIG_BT_HCIUART_INTEL) += hci_intel.o > > hci_uart-$(CONFIG_BT_HCIUART_BCM) += hci_bcm.o > > hci_uart-$(CONFIG_BT_HCIUART_QCA) += hci_qca.o > > hci_uart-$(CONFIG_BT_HCIUART_AG6XX) += hci_ag6xx.o > > +hci_uart-$(CONFIG_BT_HCIUART_MRVL) += hci_mrvl.o > > hci_uart-objs := $(hci_uart-y) > > > > ccflags-y += -D__CHECK_ENDIAN__ > > diff --git a/drivers/bluetooth/hci_ldisc.c > > b/drivers/bluetooth/hci_ldisc.c index 047e786..4896b6f 100644 > > --- a/drivers/bluetooth/hci_ldisc.c > > +++ b/drivers/bluetooth/hci_ldisc.c > > @@ -821,6 +821,9 @@ static int __init hci_uart_init(void) > > #ifdef CONFIG_BT_HCIUART_AG6XX > > ag6xx_init(); > > #endif > > +#ifdef CONFIG_BT_HCIUART_MRVL > > + mrvl_init(); > > +#endif > > > > return 0; > > } > > @@ -856,6 +859,9 @@ static void __exit hci_uart_exit(void) > > #ifdef CONFIG_BT_HCIUART_AG6XX > > ag6xx_deinit(); > > #endif > > +#ifdef CONFIG_BT_HCIUART_MRVL > > + mrvl_deinit(); > > +#endif > > > > /* Release tty registration of line discipline */ > > err = tty_unregister_ldisc(N_HCI); > > diff --git a/drivers/bluetooth/hci_mrvl.c > > b/drivers/bluetooth/hci_mrvl.c new file mode 100644 index > > 0000000..2686901 > > --- /dev/null > > +++ b/drivers/bluetooth/hci_mrvl.c > > @@ -0,0 +1,543 @@ > > +/* Bluetooth HCI UART driver for Marvell devices > > + * > > + * Copyright (C) 2016, Marvell International Ltd. > > + * > > + * Acknowledgements: > > + * This file is based on hci_h4.c, which was written > > + * by Maxim Krasnyansky and Marcel Holtmann. > > + * > > + * This software file (the "File") is distributed by Marvell > > +International > > + * Ltd. under the terms of the GNU General Public License Version 2, > > +June 1991 > > + * (the "License"). You may use, redistribute and/or modify this > > +File in > > + * accordance with the terms and conditions of the License, a copy of > > +which > > + * is available on the worldwide web at > > + * http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. > > + * > > + * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND > > +THE > > + * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR > > +PURPOSE > > + * ARE EXPRESSLY DISCLAIMED. The License provides additional details > > +about > > + * this warranty disclaimer. > > + */ > > + > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include "hci_uart.h" > > + > > +struct fw_data { > > + wait_queue_head_t init_wait_q; > > + u8 wait_fw; > > + int next_len; > > + u8 five_bytes[5]; > > + u8 next_index; > > + u8 last_ack; > > + u8 expected_ack; > > + struct ktermios old_termios; > > + u8 chip_id; > > + u8 chip_rev; > > + struct sk_buff *skb; > > +}; > > + > > +#define MRVL_HELPER_NAME "mrvl/helper_uart_3000000.bin" > > +#define MRVL_8997_CHIP_ID 0x50 > > +#define MRVL_8997_FW_NAME "mrvl/uart8997_bt.bin" > > +#define MRVL_MAX_FW_BLOCK_SIZE 1024 > > +#define MRVL_MAX_RETRY_SEND 12 > > +#define MRVL_DNLD_DELAY 100 > > +#define MRVL_ACK 0x5A > > +#define MRVL_NAK 0xBF > > +#define MRVL_HDR_REQ_FW 0xA5 > > +#define MRVL_HDR_CHIP_VER 0xAA > > +#define MRVL_HCI_OP_SET_BAUD 0xFC09 > > +#define MRVL_FW_HDR_LEN 5 > > +#define MRVL_WAIT_TIMEOUT msecs_to_jiffies(12000) > > + > > +struct mrvl_data { > > + struct sk_buff *rx_skb; > > + struct sk_buff_head txq; > > + struct fw_data *fwdata; > > +}; > > + > > +static int get_cts(struct hci_uart *hu) { > > + struct tty_struct *tty = hu->tty; > > + u32 state = tty->ops->tiocmget(tty); > > + > > + if (state & TIOCM_CTS) { > > + bt_dev_dbg(hu->hdev, "CTS is low"); > > + return 1; > > + } > > + bt_dev_dbg(hu->hdev, "CTS is high"); > > + > > + return 0; > > +} > > + > > +/* Initialize protocol */ > > +static int mrvl_open(struct hci_uart *hu) { > > + struct mrvl_data *mrvl; > > + > > + bt_dev_dbg(hu->hdev, "hu %p", hu); > > + > > + mrvl = kzalloc(sizeof(*mrvl), GFP_KERNEL); > > + if (!mrvl) > > + return -ENOMEM; > > + > > + skb_queue_head_init(&mrvl->txq); > > + hu->priv = mrvl; > > + > > + return 0; > > +} > > + > > +/* Flush protocol data */ > > +static int mrvl_flush(struct hci_uart *hu) { > > + struct mrvl_data *mrvl = hu->priv; > > + > > + bt_dev_dbg(hu->hdev, "hu %p", hu); > > + > > + skb_queue_purge(&mrvl->txq); > > + > > + return 0; > > +} > > + > > +/* Close protocol */ > > +static int mrvl_close(struct hci_uart *hu) { > > + struct mrvl_data *mrvl = hu->priv; > > + > > + bt_dev_dbg(hu->hdev, "hu %p", hu); > > + > > + skb_queue_purge(&mrvl->txq); > > + kfree_skb(mrvl->rx_skb); > > + hu->priv = NULL; > > + kfree(mrvl); > > + > > + return 0; > > +} > > + > > +/* Enqueue frame for transmittion (padding, crc, etc) */ static int > > +mrvl_enqueue(struct hci_uart *hu, struct sk_buff *skb) { > > + struct mrvl_data *mrvl = hu->priv; > > + > > + bt_dev_dbg(hu->hdev, "hu %p skb %p", hu, skb); > > + > > + /* Prepend skb with frame type */ > > + memcpy(skb_push(skb, 1), &hci_skb_pkt_type(skb), 1); > > + skb_queue_tail(&mrvl->txq, skb); > > + > > + return 0; > > +} > > + > > +static const struct h4_recv_pkt mrvl_recv_pkts[] = { > > + { H4_RECV_ACL, .recv = hci_recv_frame }, > > + { H4_RECV_SCO, .recv = hci_recv_frame }, > > + { H4_RECV_EVENT, .recv = hci_recv_frame }, }; > > + > > +/* Send ACK/NAK to the device */ > > +static void mrvl_send_ack(struct hci_uart *hu, unsigned char ack) { > > + struct mrvl_data *mrvl = hu->priv; > > + struct sk_buff *skb; > > + > > + skb = bt_skb_alloc(sizeof(ack), GFP_KERNEL); > > + if (!skb) > > + return; > > + > > + memcpy(skb->data, &ack, sizeof(ack)); > > + skb_put(skb, sizeof(ack)); > > + skb_queue_head(&mrvl->txq, skb); > > + hci_uart_tx_wakeup(hu); > > +} > > + > > +/* Validate the feedback data from device */ static void > > +mrvl_pkt_complete(struct hci_uart *hu, struct sk_buff *skb) { > > + struct mrvl_data *mrvl = hu->priv; > > + struct fw_data *fw_data = mrvl->fwdata; > > + u16 lhs, rhs; > > + > > + lhs = get_unaligned_le16(skb->data + 1); > > + rhs = get_unaligned_le16(skb->data + 3); > > + if ((lhs ^ rhs) == 0xffff) { > > + mrvl_send_ack(hu, MRVL_ACK); > > + fw_data->wait_fw = 1; > > + fw_data->next_len = lhs; > > + /* Firmware download is done, send the last ack */ > > + if (!lhs) > > + fw_data->last_ack = 1; > > + > > + if (fw_data->expected_ack == MRVL_HDR_CHIP_VER) { > > + fw_data->chip_id = skb->data[1]; > > + fw_data->chip_rev = skb->data[2]; > > + } > > + wake_up_interruptible(&fw_data->init_wait_q); > > + } else { > > + mrvl_send_ack(hu, MRVL_NAK); > > + } > > +} > > + > > +/* This function receives data from the uart device during firmware > download. > > + * Driver expects 5 bytes of data as per the protocal in the below > format: > > + *
> > + * BYTE_3 and BYTE_4 are compliment of BYTE_1 an BYTE_2. Data can > > +come in chunks > > + * of any length. If length received is < 5, accumulate the data in > > +an array, > > + * until we have a sequence of 5 bytes, starting with the expected > > +HEADER. If > > + * the length received is > 5 bytes, then get the first 5 bytes, > > +starting with > > + * the HEADER and process the same, ignoring the rest of the bytes as > > +per the > > + * protocal. > > + */ > > +static struct sk_buff *mrvl_process_fw_data(struct hci_uart *hu, > > + struct sk_buff *skb, > > + u8 *buf, int count) > > +{ > > + struct mrvl_data *mrvl = hu->priv; > > + struct fw_data *fw_data = mrvl->fwdata; > > + int i = 0, len; > > + > > + if (!skb) { > > + while (buf[i] != fw_data->expected_ack && i < count) > > + i++; > > + if (i == count) > > + return ERR_PTR(-EILSEQ); > > + > > + skb = bt_skb_alloc(MRVL_FW_HDR_LEN, GFP_KERNEL); > > + } > > + > > + if (!skb) > > + return ERR_PTR(-ENOMEM); > > + > > + len = count - i; > > + memcpy(skb_put(skb, len), &buf[i], len); > > + > > + if (skb->len == MRVL_FW_HDR_LEN) { > > + mrvl_pkt_complete(hu, skb); > > + kfree_skb(skb); > > + skb = NULL; > > + } > > + > > + return skb; > > +} > > + > > +/* Receive firmware feedback data */ > > +static int mrvl_recv_for_prepare(struct hci_uart *hu, const void > *data, > > + int count) > > +{ > > + struct mrvl_data *mrvl = hu->priv; > > + > > + mrvl->fwdata->skb = mrvl_process_fw_data(hu, mrvl->fwdata->skb, > > + (u8 *)data, count); > > + if (IS_ERR(mrvl->fwdata->skb)) { > > + int err = PTR_ERR(mrvl->fwdata->skb); > > + > > + bt_dev_err(hu->hdev, > > + "Receive firmware data failed (%d)", err); > > + mrvl->fwdata->skb = NULL; > > + return err; > > + } > > + > > + return 0; > > +} > > + > > +/* Receive data */ > > +static int mrvl_recv(struct hci_uart *hu, const void *data, int > > +count) { > > + struct mrvl_data *mrvl = hu->priv; > > + > > + if (!test_bit(HCI_UART_REGISTERED, &hu->flags)) > > + return -EUNATCH; > > + > > + mrvl->rx_skb = h4_recv_buf(hu->hdev, mrvl->rx_skb, data, count, > > + mrvl_recv_pkts, ARRAY_SIZE(mrvl_recv_pkts)); > > + if (IS_ERR(mrvl->rx_skb)) { > > + int err = PTR_ERR(mrvl->rx_skb); > > + > > + bt_dev_err(hu->hdev, "Frame reassembly failed (%d)", err); > > + mrvl->rx_skb = NULL; > > + return err; > > + } > > + > > + return count; > > +} > > + > > +static struct sk_buff *mrvl_dequeue(struct hci_uart *hu) { > > + struct mrvl_data *mrvl = hu->priv; > > + > > + return skb_dequeue(&mrvl->txq); > > +} > > + > > +static int mrvl_init_fw_data(struct hci_uart *hu) { > > + struct fw_data *fwdata; > > + struct mrvl_data *mrvl = hu->priv; > > + > > + fwdata = kzalloc(sizeof(*fwdata), GFP_KERNEL); > > + if (!fwdata) > > + return -ENOMEM; > > + > > + mrvl->fwdata = fwdata; > > + init_waitqueue_head(&fwdata->init_wait_q); > > + > > + return 0; > > +} > > + > > +/* Wait for the header from device */ static int > > +mrvl_wait_for_hdr(struct hci_uart *hu, u8 header) { > > + struct mrvl_data *mrvl = hu->priv; > > + struct fw_data *fw_data = mrvl->fwdata; > > + > > + fw_data->expected_ack = header; > > + fw_data->wait_fw = 0; > > + > > + if (!wait_event_interruptible_timeout(fw_data->init_wait_q, > > + fw_data->wait_fw, > > + MRVL_WAIT_TIMEOUT)) { > > + BT_ERR("TIMEOUT, waiting for:0x%x", fw_data->expected_ack); > > + return -1; > > + } > > + > > + return 0; > > +} > > + > > +/* Send bytes to device */ > > +static int mrvl_send_data(struct hci_uart *hu, struct sk_buff *skb) { > > + struct mrvl_data *mrvl = hu->priv; > > + > > + skb_queue_head(&mrvl->txq, skb); > > + hci_uart_tx_wakeup(hu); > > + > > + if (mrvl_wait_for_hdr(hu, MRVL_HDR_REQ_FW) == -1) > > + return -1; > > + > > + return 0; > > +} > > + > > +/* Download firmware to the device */ static int mrvl_dnld_fw(struct > > +hci_uart *hu, const char *file_name) { > > + const struct firmware *fw = NULL; > > + struct sk_buff *skb = NULL; > > + int offset = 0; > > + int ret, tx_len; > > + struct mrvl_data *mrvl = hu->priv; > > + struct fw_data *fw_data = mrvl->fwdata; > > + > > + ret = request_firmware(&fw, file_name, hu->tty->dev); > > + if (ret < 0) { > > + BT_ERR("request_firmware() failed"); > > + return -1; > > + } > > + > > + BT_INFO("Downloading FW (%d bytes)", (u16)fw->size); > > + > > + fw_data->last_ack = 0; > > + > > + while (1) { > > + if ((offset >= fw->size) || (fw_data->last_ack)) > > + break; > > + tx_len = fw_data->next_len; > > + if ((fw->size - offset) < tx_len) > > + tx_len = fw->size - offset; > > + > > + skb = bt_skb_alloc(MRVL_MAX_FW_BLOCK_SIZE, GFP_KERNEL); > > + if (!skb) { > > + ret = -1; > > + goto done; > > + } > > + > > + memcpy(skb->data, &fw->data[offset], tx_len); > > + skb_put(skb, tx_len); > > + if (mrvl_send_data(hu, skb) != 0) { > > + BT_ERR("Fail to download firmware"); > > + ret = -1; > > + goto done; > > + } > > + offset += tx_len; > > + } > > + > > + BT_INFO("Downloaded %d byte firmware", offset); > > +done: > > + release_firmware(fw); > > + > > + return ret; > > +} > > + > > +/* Set the baud rate */ > > +static int mrvl_set_dev_baud(struct hci_uart *hu) { > > + struct hci_dev *hdev = hu->hdev; > > + struct sk_buff *skb; > > + static const u8 baud_param[] = { 0xc0, 0xc6, 0x2d, 0x00 }; > > + int err; > > + > > + skb = __hci_cmd_sync(hdev, MRVL_HCI_OP_SET_BAUD, > sizeof(baud_param), > > + baud_param, HCI_INIT_TIMEOUT); > > + if (IS_ERR(skb)) { > > + err = PTR_ERR(skb); > > + bt_dev_err(hu->hdev, "Set device baudrate failed (%d)", > err); > > + return err; > > + } > > + kfree_skb(skb); > > + > > + return 0; > > +} > > + > > +/* Reset device */ > > +static int mrvl_reset(struct hci_uart *hu) { > > + struct hci_dev *hdev = hu->hdev; > > + struct sk_buff *skb; > > + int err; > > + > > + skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, > HCI_CMD_TIMEOUT); > > + if (IS_ERR(skb)) { > > + err = PTR_ERR(skb); > > + bt_dev_err(hu->hdev, "Reset device failed (%d)", err); > > + return err; > > + } > > + kfree_skb(skb); > > + > > + return 0; > > +} > > + > > +static int mrvl_get_fw_name(struct hci_uart *hu, char *fw_name) { > > + struct mrvl_data *mrvl = hu->priv; > > + struct fw_data *fw_data = mrvl->fwdata; > > + > > + if (mrvl_wait_for_hdr(hu, MRVL_HDR_CHIP_VER) != 0) { > > + BT_ERR("Could not read chip id and revision"); > > + return -1; > > + } > > + > > + BT_DBG("chip_id=0x%x, chip_rev=0x%x", > > + fw_data->chip_id, fw_data->chip_rev); > > + > > + switch (fw_data->chip_id) { > > + case MRVL_8997_CHIP_ID: > > + memcpy(fw_name, MRVL_8997_FW_NAME, > sizeof(MRVL_8997_FW_NAME)); > > + return 0; > > + default: > > + BT_ERR("Invalid chip id"); > > + return -1; > > + } > > +} > > + > > +/* Download helper and firmare to device */ static int > > +hci_uart_dnld_fw(struct hci_uart *hu) { > > + struct tty_struct *tty = hu->tty; > > + struct ktermios new_termios; > > + struct ktermios old_termios; > > + char fw_name[128]; > > + int ret; > > + > > + old_termios = tty->termios; > > + > > + if (get_cts(hu)) { > > + BT_INFO("fw is running"); > > + return 0; > > + } > > + > > + hci_uart_set_baudrate(hu, 115200); > > + hci_uart_set_flow_control(hu, true); > > + > > + ret = mrvl_wait_for_hdr(hu, MRVL_HDR_REQ_FW); > > + if (ret) > > + goto fail; > > + > > + ret = mrvl_dnld_fw(hu, MRVL_HELPER_NAME); > > + if (ret) > > + goto fail; > > + > > + msleep(MRVL_DNLD_DELAY); > > + > > + hci_uart_set_baudrate(hu, 3000000); > > + hci_uart_set_flow_control(hu, false); > > + > > + ret = mrvl_get_fw_name(hu, fw_name); > > + if (ret) > > + goto fail; > > + > > + ret = mrvl_wait_for_hdr(hu, MRVL_HDR_REQ_FW); > > + if (ret) > > + goto fail; > > + > > + ret = mrvl_dnld_fw(hu, fw_name); > > + if (ret) > > + goto fail; > > + > > + msleep(MRVL_DNLD_DELAY); > > +fail: > > + /* restore uart settings */ > > + new_termios = tty->termios; > > + tty->termios.c_cflag = old_termios.c_cflag; > > + tty_set_termios(tty, &new_termios); > > + > > + return ret; > > +} > > + > > +static int mrvl_setup(struct hci_uart *hu) { > > + int err; > > + > > + hci_uart_set_baudrate(hu, 115200); > > + hci_uart_set_flow_control(hu, false); > > + > > + err = mrvl_reset(hu); > > + if (!err) { > > + err = mrvl_set_dev_baud(hu); > > + if (err) > > + return -1; > > + } > > + > > + hci_uart_set_baudrate(hu, 3000000); > > + hci_uart_set_flow_control(hu, false); > > + msleep(MRVL_DNLD_DELAY); > > + > > + return 0; > > +} > > + > > +static int mrvl_prepare(struct hci_uart *hu) { > > + struct mrvl_data *mrvl = hu->priv; > > + int err; > > + > > + err = mrvl_init_fw_data(hu); > > + if (!err) > > + err = hci_uart_dnld_fw(hu); > > + > > + kfree(mrvl->fwdata); > > + return err; > > +} > > + > > +static const struct hci_uart_proto mrvlp = { > > + .id = HCI_UART_MRVL, > > + .name = "MRVL", > > + .open = mrvl_open, > > + .close = mrvl_close, > > + .recv = mrvl_recv, > > + .enqueue = mrvl_enqueue, > > + .dequeue = mrvl_dequeue, > > + .flush = mrvl_flush, > > + .setup = mrvl_setup, > > + .prepare = mrvl_prepare, > > + .recv_for_prepare = mrvl_recv_for_prepare, > > +}; > > + > > +int __init mrvl_init(void) > > +{ > > + return hci_uart_register_proto(&mrvlp); } > > + > > +int __exit mrvl_deinit(void) > > +{ > > + return hci_uart_unregister_proto(&mrvlp); > > +} > > diff --git a/drivers/bluetooth/hci_uart.h > > b/drivers/bluetooth/hci_uart.h index 17ba3b4..8c53b50 100644 > > --- a/drivers/bluetooth/hci_uart.h > > +++ b/drivers/bluetooth/hci_uart.h > > @@ -35,7 +35,7 @@ > > #define HCIUARTGETFLAGS _IOR('U', 204, int) > > > > /* UART protocols */ > > -#define HCI_UART_MAX_PROTO 10 > > +#define HCI_UART_MAX_PROTO 11 > > > > #define HCI_UART_H4 0 > > #define HCI_UART_BCSP 1 > > @@ -47,6 +47,7 @@ > > #define HCI_UART_BCM 7 > > #define HCI_UART_QCA 8 > > #define HCI_UART_AG6XX 9 > > +#define HCI_UART_MRVL 10 > > > > #define HCI_UART_RAW_DEVICE 0 > > #define HCI_UART_RESET_ON_INIT 1 > > @@ -192,3 +193,8 @@ int qca_deinit(void); > > int ag6xx_init(void); > > int ag6xx_deinit(void); > > #endif > > + > > +#ifdef CONFIG_BT_HCIUART_MRVL > > +int mrvl_init(void); > > +int mrvl_deinit(void); > > +#endif > > > > > This serial of patches work well on my device... > > Tested-by: Jeffy Chen Any further comments on this patch series? It’s been pending for long time. Regards, Amitkumar