Re: [PATCH 3/3] pinctrl: ingenic: Add .max_register in regmap_config

[Zhou Yanjie <zhouyanjie@wanyeetech.com>]

Hi Paul,

On 2021/7/18 上午1:48, Paul Cercueil wrote:
> Compute the max register from the GPIO chip offset and number of GPIO
> chips.
>
> This permits to read all registers from debugfs.
>
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> ---
>   drivers/pinctrl/pinctrl-ingenic.c | 7 +++++--
>   1 file changed, 5 insertions(+), 2 deletions(-)


Tested-by: 周琰杰 (Zhou Yanjie)<zhouyanjie@wanyeetech.com>


> diff --git a/drivers/pinctrl/pinctrl-ingenic.c b/drivers/pinctrl/pinctrl-ingenic.c
> index 263498be8e31..2bbcb8063a16 100644
> --- a/drivers/pinctrl/pinctrl-ingenic.c
> +++ b/drivers/pinctrl/pinctrl-ingenic.c
> @@ -3759,6 +3759,7 @@ static int __init ingenic_pinctrl_probe(struct platform_device *pdev)
>   	void __iomem *base;
>   	const struct ingenic_chip_info *chip_info;
>   	struct device_node *node;
> +	struct regmap_config regmap_config;
>   	unsigned int i;
>   	int err;
>   
> @@ -3776,8 +3777,10 @@ static int __init ingenic_pinctrl_probe(struct platform_device *pdev)
>   	if (IS_ERR(base))
>   		return PTR_ERR(base);
>   
> -	jzpc->map = devm_regmap_init_mmio(dev, base,
> -			&ingenic_pinctrl_regmap_config);
> +	regmap_config = ingenic_pinctrl_regmap_config;
> +	regmap_config.max_register = chip_info->num_chips * chip_info->reg_offset;
> +
> +	jzpc->map = devm_regmap_init_mmio(dev, base, &regmap_config);
>   	if (IS_ERR(jzpc->map)) {
>   		dev_err(dev, "Failed to create regmap\n");
>   		return PTR_ERR(jzpc->map);