linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Baolin Wang <baolin.wang@linaro.org>
To: sre@kernel.org, robh+dt@kernel.org, mark.rutland@arm.com
Cc: linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, yuanjiang.yu@unisoc.com,
	baolin.wang@linaro.org, baolin.wang7@gmail.com,
	zhang.lyra@gmail.com, orsonzhai@gmail.com
Subject: [PATCH 3/5] power: supply: sc27xx: Optimize the battery resistance with measuring temperature
Date: Mon, 28 Oct 2019 15:18:59 +0800	[thread overview]
Message-ID: <ebd283542884e08e5a7f7b06e8d51ec47896743e.1572245011.git.baolin.wang@linaro.org> (raw)
In-Reply-To: <cover.1572245011.git.baolin.wang@linaro.org>
In-Reply-To: <cover.1572245011.git.baolin.wang@linaro.org>

From: Yuanjiang Yu <yuanjiang.yu@unisoc.com>

Optimize the battery internal resistance in a certain temerature to
get a accurate battery internal resistance.

Signed-off-by: Yuanjiang Yu <yuanjiang.yu@unisoc.com>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
---
 drivers/power/supply/sc27xx_fuel_gauge.c |   32 ++++++++++++++++++++++++++++--
 1 file changed, 30 insertions(+), 2 deletions(-)

diff --git a/drivers/power/supply/sc27xx_fuel_gauge.c b/drivers/power/supply/sc27xx_fuel_gauge.c
index bc8f5bd..221b6fb 100644
--- a/drivers/power/supply/sc27xx_fuel_gauge.c
+++ b/drivers/power/supply/sc27xx_fuel_gauge.c
@@ -81,9 +81,11 @@
  * @max_volt: the maximum constant input voltage in millivolt
  * @min_volt: the minimum drained battery voltage in microvolt
  * @table_len: the capacity table length
+ * @resist_table_len: the resistance table length
  * @cur_1000ma_adc: ADC value corresponding to 1000 mA
  * @vol_1000mv_adc: ADC value corresponding to 1000 mV
  * @cap_table: capacity table with corresponding ocv
+ * @resist_table: resistance percent table with corresponding temperature
  */
 struct sc27xx_fgu_data {
 	struct regmap *regmap;
@@ -103,15 +105,18 @@ struct sc27xx_fgu_data {
 	int max_volt;
 	int min_volt;
 	int table_len;
+	int resist_table_len;
 	int cur_1000ma_adc;
 	int vol_1000mv_adc;
 	struct power_supply_battery_ocv_table *cap_table;
+	struct power_supply_resistance_temp_table *resist_table;
 };
 
 static int sc27xx_fgu_cap_to_clbcnt(struct sc27xx_fgu_data *data, int capacity);
 static void sc27xx_fgu_capacity_calibration(struct sc27xx_fgu_data *data,
 					    int cap, bool int_mode);
 static void sc27xx_fgu_adjust_cap(struct sc27xx_fgu_data *data, int cap);
+static int sc27xx_fgu_get_temp(struct sc27xx_fgu_data *data, int *temp);
 
 static const char * const sc27xx_charger_supply_name[] = {
 	"sc2731_charger",
@@ -434,7 +439,7 @@ static int sc27xx_fgu_get_current(struct sc27xx_fgu_data *data, int *val)
 
 static int sc27xx_fgu_get_vbat_ocv(struct sc27xx_fgu_data *data, int *val)
 {
-	int vol, cur, ret;
+	int vol, cur, ret, temp, resistance;
 
 	ret = sc27xx_fgu_get_vbat_vol(data, &vol);
 	if (ret)
@@ -444,8 +449,19 @@ static int sc27xx_fgu_get_vbat_ocv(struct sc27xx_fgu_data *data, int *val)
 	if (ret)
 		return ret;
 
+	resistance = data->internal_resist;
+	if (data->resist_table_len > 0) {
+		ret = sc27xx_fgu_get_temp(data, &temp);
+		if (ret)
+			return ret;
+
+		resistance = power_supply_temp2resist_simple(data->resist_table,
+						data->resist_table_len, temp);
+		resistance = data->internal_resist * resistance / 100;
+	}
+
 	/* Return the battery OCV in micro volts. */
-	*val = vol * 1000 - cur * data->internal_resist;
+	*val = vol * 1000 - cur * resistance;
 
 	return 0;
 }
@@ -929,6 +945,18 @@ static int sc27xx_fgu_hw_init(struct sc27xx_fgu_data *data)
 	if (!data->alarm_cap)
 		data->alarm_cap += 1;
 
+	data->resist_table_len = info.resist_table_size;
+	if (data->resist_table_len > 0) {
+		data->resist_table = devm_kmemdup(data->dev, info.resist_table,
+						  data->resist_table_len *
+						  sizeof(struct power_supply_resistance_temp_table),
+						  GFP_KERNEL);
+		if (!data->resist_table) {
+			power_supply_put_battery_info(data->battery, &info);
+			return -ENOMEM;
+		}
+	}
+
 	power_supply_put_battery_info(data->battery, &info);
 
 	ret = sc27xx_fgu_calibration(data);
-- 
1.7.9.5


  parent reply	other threads:[~2019-10-28  7:20 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-28  7:18 [PATCH 0/5] Improve the SC27XX fuel gauge controller Baolin Wang
2019-10-28  7:18 ` [PATCH 1/5] dt-bindings: power: Introduce one property to describe the battery resistance with temperature changes Baolin Wang
2019-10-30 14:38   ` Rob Herring
2019-10-31  2:13     ` Baolin Wang
2019-10-28  7:18 ` [PATCH 2/5] power: supply: core: Add battery internal resistance temperature table support Baolin Wang
2019-10-28  7:18 ` Baolin Wang [this message]
2019-10-28  7:19 ` [PATCH 4/5] dt-bindings: power: sc27xx: Add a new property to describe the real resistance of coulomb counter chip Baolin Wang
2019-10-30 14:39   ` Rob Herring
2019-10-31  2:14     ` Baolin Wang
2019-10-28  7:19 ` [PATCH 5/5] power: supply: sc27xx: Calibrate the resistance of coulomb counter Baolin Wang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ebd283542884e08e5a7f7b06e8d51ec47896743e.1572245011.git.baolin.wang@linaro.org \
    --to=baolin.wang@linaro.org \
    --cc=baolin.wang7@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=orsonzhai@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=sre@kernel.org \
    --cc=yuanjiang.yu@unisoc.com \
    --cc=zhang.lyra@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).