linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Nicolas Dufresne <nicolas@ndufresne.ca>
To: Neil Armstrong <narmstrong@baylibre.com>, hverkuil@xs4all.nl
Cc: linux-amlogic@lists.infradead.org, linux-media@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v3 0/4] media: meson: Add support for the Amlogic GE2D Accelerator Unit
Date: Tue, 08 Dec 2020 11:54:04 -0500	[thread overview]
Message-ID: <ec5fd04e7bcec92ae021bc4d36373deaa50e96fd.camel@ndufresne.ca> (raw)
In-Reply-To: <20201117084440.578540-1-narmstrong@baylibre.com>

Le mardi 17 novembre 2020 à 09:44 +0100, Neil Armstrong a écrit :
> The GE2D is a 2D accelerator with various features like configurable blitter
> with alpha blending, frame rotation, scaling, format conversion and colorspace
> conversion.
> 
> The driver implements a Memory2Memory VB2 V4L2 streaming device permitting:
> - 0, 90, 180, 270deg rotation
> - horizontal/vertical flipping
> - source cropping
> - destination compositing
> - 32bit/24bit/16bit format conversion
> 
> This adds the support for the GE2D version found in the AXG SoCs Family.
> 
> The missing features are:
> - Source scaling
> - Colorspace conversion
> - Advanced alpha blending & blitting options

Is there some Open Source software using this driver ? GStreamer got some
support, but it's mostly focused on CSC and Scaling (flipping should work, but
rotation is not implemented). But I'm not aware of anything else, hence asking.

> 
> Dependencies:
> - Patches 1-3: None
> - Patch 4: 
> https://lkml.kernel.org/r/20200915124553.8056-1-narmstrong@baylibre.com (appli
> ed for 5.11)
> 
> Changes since v2:
> - removed error check in and after get_frame()
> - moved the v4l2_file_operations lower in the code to avoid adding
> vidioc_setup_cap_fmt on top
> - removed all memcpy of pix_fmt
> - simplified & fixed ge2d_start_streaming
> - added local buffer type check in vidioc_g_selection instead of using
> get_frame error
> - removed impossible <0 rectangle check, fixed error string
> - added comment on condition after V4L2_CID_ROTATE
> 
> Changes since v1:
> - Rebased on v5.10-rc1
> 
> / # v4l2-compliance -s
> v4l2-compliance SHA: ea16a7ef13a902793a5c2626b0cefc4d956147f3, 64 bits, 64-bit
> time_t
> 
> Compliance test for meson-ge2d device /dev/video0:
> 
> Driver Info:
>         Driver name      : meson-ge2d
>         Card type        : meson-ge2d
>         Bus info         : platform:meson-ge2d
>         Driver version   : 5.9.0
>         Capabilities     : 0x84208000
>                 Video Memory-to-Memory
>                 Streaming
>                 Extended Pix Format
>                 Device Capabilities
>         Device Caps      : 0x04208000
>                 Video Memory-to-Memory
>                 Streaming
>                 Extended Pix Format
> 
> Required ioctls:
>         test VIDIOC_QUERYCAP: OK
> 
> Allow for multiple opens:
>         test second /dev/video0 open: OK
>         test VIDIOC_QUERYCAP: OK
>         test VIDIOC_G/S_PRIORITY: OK
>         test for unlimited opens: OK
> 
>         test invalid ioctls: OK
> Debug ioctls:
>         test VIDIOC_DBG_G/S_REGISTER: OK
>         test VIDIOC_LOG_STATUS: OK (Not Supported)
> 
> Input ioctls:
>         test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
>         test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
>         test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
>         test VIDIOC_ENUMAUDIO: OK (Not Supported)
>         test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
>         test VIDIOC_G/S_AUDIO: OK (Not Supported)
>         Inputs: 0 Audio Inputs: 0 Tuners: 0
> 
> Output ioctls:
>         test VIDIOC_G/S_MODULATOR: OK (Not Supported)
>         test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
>         test VIDIOC_ENUMAUDOUT: OK (Not Supported)
>         test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
>         test VIDIOC_G/S_AUDOUT: OK (Not Supported)
>         Outputs: 0 Audio Outputs: 0 Modulators: 0
> 
> Input/Output configuration ioctls:
>         test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
>         test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
>         test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
>         test VIDIOC_G/S_EDID: OK (Not Supported)
> 
> Control ioctls:
>         test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
>         test VIDIOC_QUERYCTRL: OK
>         test VIDIOC_G/S_CTRL: OK
>         test VIDIOC_G/S/TRY_EXT_CTRLS: OK
>         test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
>         test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
>         Standard Controls: 4 Private Controls: 0
> 
> Format ioctls:
>         test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
>         test VIDIOC_G/S_PARM: OK (Not Supported)
>         test VIDIOC_G_FBUF: OK (Not Supported)
>         test VIDIOC_G_FMT: OK
>         test VIDIOC_TRY_FMT: OK
>         test VIDIOC_S_FMT: OK
>         test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
>         test Cropping: OK
>         test Composing: OK
>         test Scaling: OK (Not Supported)
> 
> Codec ioctls:
>         test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
>         test VIDIOC_G_ENC_INDEX: OK (Not Supported)
>         test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
> 
> Buffer ioctls:
>         test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
>         test VIDIOC_EXPBUF: OK
>         test Requests: OK (Not Supported)
> 
> Test input 0:
> 
> Streaming ioctls:
>         test read/write: OK (Not Supported)
>         test blocking wait: OK
>         Video Capture: Captured 58 buffers                
>         test MMAP (no poll): OK
>         Video Capture: Captured 58 buffers                
>         test MMAP (select): OK
>         Video Capture: Captured 58 buffers                
>         test MMAP (epoll): OK
>         test USERPTR (no poll): OK (Not Supported)
>         test USERPTR (select): OK (Not Supported)
>         test DMABUF: Cannot test, specify --expbuf-device
> 
> Total for meson-ge2d device /dev/video0: 52, Succeeded: 52, Failed: 0,
> Warnings: 0
> 
> Neil Armstrong (4):
>   dt-bindings: media: Add bindings for the Amlogic GE2D Accelerator Unit
>   media: meson: Add M2M driver for the Amlogic GE2D Accelerator Unit
>   MAINTAINERS: Add myself as maintainer of the Amlogic GE2D driver
>   arm64: dts: meson-axg: add GE2D node
> 
>  .../bindings/media/amlogic,axg-ge2d.yaml      |   47 +
>  MAINTAINERS                                   |    9 +
>  arch/arm64/boot/dts/amlogic/meson-axg.dtsi    |    9 +
>  drivers/media/platform/Kconfig                |   13 +
>  drivers/media/platform/Makefile               |    2 +
>  drivers/media/platform/meson/ge2d/Makefile    |    3 +
>  drivers/media/platform/meson/ge2d/ge2d-regs.h |  360 ++++++
>  drivers/media/platform/meson/ge2d/ge2d.c      | 1091 +++++++++++++++++
>  8 files changed, 1534 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/amlogic,axg-
> ge2d.yaml
>  create mode 100644 drivers/media/platform/meson/ge2d/Makefile
>  create mode 100644 drivers/media/platform/meson/ge2d/ge2d-regs.h
>  create mode 100644 drivers/media/platform/meson/ge2d/ge2d.c
> 



  parent reply	other threads:[~2020-12-08 16:55 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-17  8:44 [PATCH v3 0/4] media: meson: Add support for the Amlogic GE2D Accelerator Unit Neil Armstrong
2020-11-17  8:44 ` [PATCH v3 1/4] dt-bindings: media: Add bindings " Neil Armstrong
2020-11-17  8:44 ` [PATCH v3 2/4] media: meson: Add M2M driver " Neil Armstrong
2020-12-02 12:40   ` Hans Verkuil
2020-12-02 14:56     ` Neil Armstrong
2020-12-02 15:14       ` Hans Verkuil
2020-11-17  8:44 ` [PATCH v3 3/4] MAINTAINERS: Add myself as maintainer of the Amlogic GE2D driver Neil Armstrong
2020-11-17  8:44 ` [PATCH v3 4/4] arm64: dts: meson-axg: add GE2D node Neil Armstrong
2020-12-02 12:27 ` [PATCH v3 0/4] media: meson: Add support for the Amlogic GE2D Accelerator Unit Hans Verkuil
2020-12-02 12:40   ` Neil Armstrong
2020-12-08 16:54 ` Nicolas Dufresne [this message]
2020-12-08 17:22   ` Neil Armstrong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ec5fd04e7bcec92ae021bc4d36373deaa50e96fd.camel@ndufresne.ca \
    --to=nicolas@ndufresne.ca \
    --cc=hverkuil@xs4all.nl \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=narmstrong@baylibre.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).