Re: [RFC PATCH 8/9] PCI/PME: Add RCEC PME handling

[Jay Fang <f.fangjian@huawei.com>]

在 2020/7/25 1:22, Sean V Kelley 写道:
> The Root Complex Event Collectors(RCEC) appear as peers of Root Ports
> and also have the PME capability. So add RCEC support to the current PME
> service driver and attach the PME service driver to the RCEC device.
> 
> Co-developed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
> Signed-off-by: Sean V Kelley <sean.v.kelley@intel.com>
> Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
> ---
>  drivers/pci/pcie/pme.c | 15 +++++++++++----
>  1 file changed, 11 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/pci/pcie/pme.c b/drivers/pci/pcie/pme.c
> index 6a32970bb731..87799166c96a 100644
> --- a/drivers/pci/pcie/pme.c
> +++ b/drivers/pci/pcie/pme.c
> @@ -310,7 +310,10 @@ static int pcie_pme_can_wakeup(struct pci_dev *dev, void *ign)
>  static void pcie_pme_mark_devices(struct pci_dev *port)
>  {
>  	pcie_pme_can_wakeup(port, NULL);
> -	if (port->subordinate)
> +
> +	if (pci_pcie_type(port) == PCI_EXP_TYPE_RC_EC)
> +		pcie_walk_rcec(port, pcie_pme_can_wakeup, NULL);
> +	else if (port->subordinate)
>  		pci_walk_bus(port->subordinate, pcie_pme_can_wakeup, NULL);
>  }
>  
> @@ -320,10 +323,15 @@ static void pcie_pme_mark_devices(struct pci_dev *port)
>   */
>  static int pcie_pme_probe(struct pcie_device *srv)
>  {
> -	struct pci_dev *port;
> +	struct pci_dev *port = srv->port;
>  	struct pcie_pme_service_data *data;
>  	int ret;
>  
> +	/* Limit to Root Ports or Root Complex Event Collectors */
> +	if ((pci_pcie_type(port) != PCI_EXP_TYPE_RC_EC) &&
> +	    (pci_pcie_type(port) != PCI_EXP_TYPE_ROOT_PORT))
> +		return -ENODEV;
> +
>  	data = kzalloc(sizeof(*data), GFP_KERNEL);
>  	if (!data)
>  		return -ENOMEM;
> @@ -333,7 +341,6 @@ static int pcie_pme_probe(struct pcie_device *srv)
>  	data->srv = srv;
>  	set_service_data(srv, data);
>  
> -	port = srv->port;
>  	pcie_pme_interrupt_enable(port, false);
>  	pcie_clear_root_pme_status(port);
>  
> @@ -445,7 +452,7 @@ static void pcie_pme_remove(struct pcie_device *srv)
>  
>  static struct pcie_port_service_driver pcie_pme_driver = {
>  	.name		= "pcie_pme",
> -	.port_type	= PCI_EXP_TYPE_ROOT_PORT,
> +	.port_type	= PCIE_ANY_PORT,
Maybe we can use port_type for driver matching. There is no need
to check the type of port in pcie_pme_probe function.


Jay

>  	.service	= PCIE_PORT_SERVICE_PME,
>  
>  	.probe		= pcie_pme_probe,
>