linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v9 0/5] Move Hisilicon 6421v600 SPMI and USB drivers  out of staging
@ 2021-06-25 17:06 Mauro Carvalho Chehab
  2021-06-25 17:06 ` [PATCH v9 1/5] staging: hikey9xx: split hi6421v600 irq into a separate driver Mauro Carvalho Chehab
                   ` (4 more replies)
  0 siblings, 5 replies; 9+ messages in thread
From: Mauro Carvalho Chehab @ 2021-06-25 17:06 UTC (permalink / raw)
  To: Greg Kroah-Hartman
  Cc: linuxarm, mauro.chehab, Mauro Carvalho Chehab, Lee Jones,
	Derek Kiernan, Dragan Cvetic, Rob Herring, devicetree,
	linux-arm-kernel, linux-kernel, linux-staging, Axel Lin,
	Mark Brown

Hi Greg,

This series contain the final bits needed for the USB3 bus to work
without staging drivers on Hikey 970.

It takes a different approach from the past series: basically,
it moves all IRQ related stuff into a new driver ( hi6421v600-irq),
and the MFD driver (hi6421-spmi-pmic) is now quit simple:
it contains just probe and regmap, which attaches into
two MFD "child" drivers (a regulator driver and an IRQ one).

This series also fixes a sutile bug recently introduced via the
regulator tree (patch 2).

Basically, the SPMI/MFD driver combination already uses the
platform data, but the new patch re-uses it to store a mutex
instead, overlapping the previous usage.

This was unoticed on my past tests, as there were some
unused data at the platform struct, that were big enough
to store a mutex, but when I tried to remove it, it caused
crashes and instability at the board.

Regards,
Mauro

Mauro Carvalho Chehab (5):
  staging: hikey9xx: split hi6421v600 irq into a separate driver
  regulator: hi6421v600-regulator: fix platform drvdata
  mfd: hi6421-spmi-pmic: move driver from staging
  dts: hisilicon: add support for the PMIC found on Hikey 970
  dts: hisilicon: add support for USB3 on Hikey 970

 .../mfd/hisilicon,hi6421-spmi-pmic.yaml       | 134 ++++++++
 MAINTAINERS                                   |   7 +
 .../boot/dts/hisilicon/hi3670-hikey970.dts    | 129 ++++++--
 arch/arm64/boot/dts/hisilicon/hi3670.dtsi     |  56 ++++
 .../boot/dts/hisilicon/hikey970-pmic.dtsi     |  87 +++++
 drivers/mfd/Kconfig                           |  16 +
 drivers/mfd/Makefile                          |   1 +
 drivers/mfd/hi6421-spmi-pmic.c                |  72 ++++
 drivers/misc/Kconfig                          |  10 +
 drivers/misc/Makefile                         |   1 +
 drivers/misc/hi6421v600-irq.c                 | 312 ++++++++++++++++++
 drivers/regulator/hi6421v600-regulator.c      |  26 +-
 drivers/staging/Kconfig                       |   2 -
 drivers/staging/Makefile                      |   1 -
 drivers/staging/hikey9xx/Kconfig              |  19 --
 drivers/staging/hikey9xx/Makefile             |   3 -
 drivers/staging/hikey9xx/TODO                 |   5 -
 drivers/staging/hikey9xx/hi6421-spmi-pmic.c   | 311 -----------------
 .../hikey9xx/hisilicon,hi6421-spmi-pmic.yaml  | 134 --------
 include/linux/mfd/hi6421-spmi-pmic.h          |  14 +-
 20 files changed, 822 insertions(+), 518 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
 create mode 100644 arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi
 create mode 100644 drivers/mfd/hi6421-spmi-pmic.c
 create mode 100644 drivers/misc/hi6421v600-irq.c
 delete mode 100644 drivers/staging/hikey9xx/Kconfig
 delete mode 100644 drivers/staging/hikey9xx/Makefile
 delete mode 100644 drivers/staging/hikey9xx/TODO
 delete mode 100644 drivers/staging/hikey9xx/hi6421-spmi-pmic.c
 delete mode 100644 drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml

-- 
2.31.1



^ permalink raw reply	[flat|nested] 9+ messages in thread

* [PATCH v9 1/5] staging: hikey9xx: split hi6421v600 irq into a separate driver
  2021-06-25 17:06 [PATCH v9 0/5] Move Hisilicon 6421v600 SPMI and USB drivers out of staging Mauro Carvalho Chehab
@ 2021-06-25 17:06 ` Mauro Carvalho Chehab
  2021-06-25 17:06 ` [PATCH v9 2/5] regulator: hi6421v600-regulator: fix platform drvdata Mauro Carvalho Chehab
                   ` (3 subsequent siblings)
  4 siblings, 0 replies; 9+ messages in thread
From: Mauro Carvalho Chehab @ 2021-06-25 17:06 UTC (permalink / raw)
  To: Greg Kroah-Hartman
  Cc: linuxarm, mauro.chehab, Mauro Carvalho Chehab, Lee Jones,
	Arnd Bergmann, Derek Kiernan, Dragan Cvetic, linux-kernel,
	linux-staging

Per MFD subsystem requirements, split the IRQ part of the
driver into a separate one with just the IRQ handling code
and the powerkey support.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/misc/Kconfig                        |  10 +
 drivers/misc/Makefile                       |   1 +
 drivers/misc/hi6421v600-irq.c               | 312 ++++++++++++++++++++
 drivers/staging/hikey9xx/hi6421-spmi-pmic.c | 245 +--------------
 include/linux/mfd/hi6421-spmi-pmic.h        |   5 -
 5 files changed, 326 insertions(+), 247 deletions(-)
 create mode 100644 drivers/misc/hi6421v600-irq.c

diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index f4fb5c52b863..29294c52d5af 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -208,6 +208,16 @@ config CS5535_CLOCK_EVENT_SRC
 	  MFGPTs have a better resolution and max interval than the
 	  generic PIT, and are suitable for use as high-res timers.
 
+config HI6421V600_IRQ
+	tristate "HiSilicon Hi6421v600 IRQ and powerkey"
+	depends on OF
+	depends on SPMI
+	select MFD_CORE
+	select REGMAP_SPMI
+	help
+	  This driver provides IRQ handling for Hi6421v600, used on
+	  some Kirin chipsets, like the one at Hikey 970.
+
 config HP_ILO
 	tristate "Channel interface driver for the HP iLO processor"
 	depends on PCI
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index e92a56d4442f..f91cab8c3d55 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -57,3 +57,4 @@ obj-$(CONFIG_HABANA_AI)		+= habanalabs/
 obj-$(CONFIG_UACCE)		+= uacce/
 obj-$(CONFIG_XILINX_SDFEC)	+= xilinx_sdfec.o
 obj-$(CONFIG_HISI_HIKEY_USB)	+= hisi_hikey_usb.o
+obj-$(CONFIG_HI6421V600_IRQ)	+= hi6421v600-irq.o
diff --git a/drivers/misc/hi6421v600-irq.c b/drivers/misc/hi6421v600-irq.c
new file mode 100644
index 000000000000..7276a668feb2
--- /dev/null
+++ b/drivers/misc/hi6421v600-irq.c
@@ -0,0 +1,312 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device driver for irqs in HISI PMIC IC
+ *
+ * Copyright (c) 2013 Linaro Ltd.
+ * Copyright (c) 2011 Hisilicon.
+ * Copyright (c) 2020-2021 Huawei Technologies Co., Ltd
+ */
+
+#include <linux/bitops.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/mfd/hi6421-spmi-pmic.h>
+#include <linux/module.h>
+#include <linux/of_gpio.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/irqdomain.h>
+#include <linux/regmap.h>
+
+struct hi6421v600_irq {
+	struct device		*dev;
+	struct irq_domain	*domain;
+	spinlock_t		lock;
+	int			irq;
+	int			gpio;
+	unsigned int		*irqs;
+	struct regmap		*regmap;
+};
+
+enum hi6421v600_irq_list {
+	OTMP = 0,
+	VBUS_CONNECT,
+	VBUS_DISCONNECT,
+	ALARMON_R,
+	HOLD_6S,
+	HOLD_1S,
+	POWERKEY_UP,
+	POWERKEY_DOWN,
+	OCP_SCP_R,
+	COUL_R,
+	SIM0_HPD_R,
+	SIM0_HPD_F,
+	SIM1_HPD_R,
+	SIM1_HPD_F,
+
+	PMIC_IRQ_LIST_MAX
+};
+
+#define HISI_IRQ_BANK_SIZE		2
+
+/*
+ * IRQ number for the power key button and mask for both UP and DOWN IRQs
+ */
+#define HISI_POWERKEY_IRQ_NUM		0
+#define HISI_IRQ_POWERKEY_UP_DOWN	(BIT(POWERKEY_DOWN) | BIT(POWERKEY_UP))
+
+/*
+ * Registers for IRQ address and IRQ mask bits
+ *
+ * Please notice that we need to regmap a larger region, as other
+ * registers are used by the irqs.
+ * See drivers/irq/hi6421-irq.c.
+ */
+#define SOC_PMIC_IRQ_MASK_0_ADDR	0x0202
+#define SOC_PMIC_IRQ0_ADDR		0x0212
+
+/*
+ * The IRQs are mapped as:
+ *
+ *	======================  =============   ============	=====
+ *	IRQ			MASK REGISTER	IRQ REGISTER	BIT
+ *	======================  =============   ============	=====
+ *	OTMP			0x0202		0x212		bit 0
+ *	VBUS_CONNECT		0x0202		0x212		bit 1
+ *	VBUS_DISCONNECT		0x0202		0x212		bit 2
+ *	ALARMON_R		0x0202		0x212		bit 3
+ *	HOLD_6S			0x0202		0x212		bit 4
+ *	HOLD_1S			0x0202		0x212		bit 5
+ *	POWERKEY_UP		0x0202		0x212		bit 6
+ *	POWERKEY_DOWN		0x0202		0x212		bit 7
+ *
+ *	OCP_SCP_R		0x0203		0x213		bit 0
+ *	COUL_R			0x0203		0x213		bit 1
+ *	SIM0_HPD_R		0x0203		0x213		bit 2
+ *	SIM0_HPD_F		0x0203		0x213		bit 3
+ *	SIM1_HPD_R		0x0203		0x213		bit 4
+ *	SIM1_HPD_F		0x0203		0x213		bit 5
+ *	======================  =============   ============	=====
+ *
+ * Each mask register contains 8 bits. The ancillary macros below
+ * convert a number from 0 to 14 into a register address and a bit mask
+ */
+#define HISI_IRQ_MASK_REG(irq_data)	(SOC_PMIC_IRQ_MASK_0_ADDR + \
+					 (irqd_to_hwirq(irq_data) / BITS_PER_BYTE))
+#define HISI_IRQ_MASK_BIT(irq_data)	BIT(irqd_to_hwirq(irq_data) & (BITS_PER_BYTE - 1))
+#define HISI_8BITS_MASK			0xff
+
+static irqreturn_t hi6421v600_irq_handler(int irq, void *__priv)
+{
+	struct hi6421v600_irq *priv = __priv;
+	unsigned long pending;
+	unsigned int in;
+	int i, offset;
+
+	for (i = 0; i < HISI_IRQ_BANK_SIZE; i++) {
+		regmap_read(priv->regmap, SOC_PMIC_IRQ0_ADDR + i, &in);
+
+		/* Mark pending IRQs as handled */
+		regmap_write(priv->regmap, SOC_PMIC_IRQ0_ADDR + i, in);
+
+		pending = in & HISI_8BITS_MASK;
+
+		if (i == HISI_POWERKEY_IRQ_NUM &&
+		    (pending & HISI_IRQ_POWERKEY_UP_DOWN) == HISI_IRQ_POWERKEY_UP_DOWN) {
+			/*
+			 * If both powerkey down and up IRQs are received,
+			 * handle them at the right order
+			 */
+			generic_handle_irq(priv->irqs[POWERKEY_DOWN]);
+			generic_handle_irq(priv->irqs[POWERKEY_UP]);
+			pending &= ~HISI_IRQ_POWERKEY_UP_DOWN;
+		}
+
+		if (!pending)
+			continue;
+
+		for_each_set_bit(offset, &pending, BITS_PER_BYTE) {
+			generic_handle_irq(priv->irqs[offset + i * BITS_PER_BYTE]);
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+static void hi6421v600_irq_mask(struct irq_data *d)
+{
+	struct hi6421v600_irq *priv = irq_data_get_irq_chip_data(d);
+	unsigned long flags;
+	unsigned int data;
+	u32 offset;
+
+	offset = HISI_IRQ_MASK_REG(d);
+
+	spin_lock_irqsave(&priv->lock, flags);
+
+	regmap_read(priv->regmap, offset, &data);
+	data |= HISI_IRQ_MASK_BIT(d);
+	regmap_write(priv->regmap, offset, data);
+
+	spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static void hi6421v600_irq_unmask(struct irq_data *d)
+{
+	struct hi6421v600_irq *priv = irq_data_get_irq_chip_data(d);
+	u32 data, offset;
+	unsigned long flags;
+
+	offset = HISI_IRQ_MASK_REG(d);
+
+	spin_lock_irqsave(&priv->lock, flags);
+
+	regmap_read(priv->regmap, offset, &data);
+	data &= ~HISI_IRQ_MASK_BIT(d);
+	regmap_write(priv->regmap, offset, data);
+
+	spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static struct irq_chip hi6421v600_pmu_irqchip = {
+	.name		= "hi6421v600-irq",
+	.irq_mask	= hi6421v600_irq_mask,
+	.irq_unmask	= hi6421v600_irq_unmask,
+	.irq_disable	= hi6421v600_irq_mask,
+	.irq_enable	= hi6421v600_irq_unmask,
+};
+
+static int hi6421v600_irq_map(struct irq_domain *d, unsigned int virq,
+			       irq_hw_number_t hw)
+{
+	struct hi6421v600_irq *priv = d->host_data;
+
+	irq_set_chip_and_handler_name(virq, &hi6421v600_pmu_irqchip,
+				      handle_simple_irq, "hi6421v600");
+	irq_set_chip_data(virq, priv);
+	irq_set_irq_type(virq, IRQ_TYPE_NONE);
+
+	return 0;
+}
+
+static const struct irq_domain_ops hi6421v600_domain_ops = {
+	.map	= hi6421v600_irq_map,
+	.xlate	= irq_domain_xlate_twocell,
+};
+
+static void hi6421v600_irq_init(struct hi6421v600_irq *priv)
+{
+	int i;
+	unsigned int pending;
+
+	/* Mask all IRQs */
+	for (i = 0; i < HISI_IRQ_BANK_SIZE; i++)
+		regmap_write(priv->regmap, SOC_PMIC_IRQ_MASK_0_ADDR + i,
+			     HISI_8BITS_MASK);
+
+	/* Mark all IRQs as handled */
+	for (i = 0; i < HISI_IRQ_BANK_SIZE; i++) {
+		regmap_read(priv->regmap, SOC_PMIC_IRQ0_ADDR + i, &pending);
+		regmap_write(priv->regmap, SOC_PMIC_IRQ0_ADDR + i,
+			     HISI_8BITS_MASK);
+	}
+}
+
+static int hi6421v600_irq_probe(struct platform_device *pdev)
+{
+	struct device *pmic_dev = pdev->dev.parent;
+	struct device *dev = &pdev->dev;
+	struct device_node *np = pmic_dev->of_node;
+	struct hi6421v600_irq *priv;
+	struct hi6421_spmi_pmic *pmic;
+	unsigned int virq;
+	int i, ret;
+
+	/*
+	 * This driver is meant to be called by hi6421-spmi-core,
+	 * which should first set drvdata. If this doesn't happen, hit
+	 * a warn on and return.
+	 */
+	pmic = dev_get_drvdata(pmic_dev);
+	if (WARN_ON(!pmic))
+		return -ENODEV;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->dev = dev;
+	priv->regmap = pmic->regmap;
+
+	spin_lock_init(&priv->lock);
+
+	priv->gpio = of_get_gpio(np, 0);
+	if (priv->gpio < 0)
+		return priv->gpio;
+
+	if (!gpio_is_valid(priv->gpio))
+		return -EINVAL;
+
+	ret = devm_gpio_request_one(dev, priv->gpio, GPIOF_IN, "pmic");
+	if (ret < 0) {
+		dev_err(dev, "Failed to request gpio%d\n", priv->gpio);
+		return ret;
+	}
+
+	priv->irq = gpio_to_irq(priv->gpio);
+
+	platform_set_drvdata(pdev, priv);
+
+	hi6421v600_irq_init(priv);
+
+	priv->irqs = devm_kzalloc(dev, PMIC_IRQ_LIST_MAX * sizeof(int), GFP_KERNEL);
+	if (!priv->irqs)
+		return -ENOMEM;
+
+	priv->domain = irq_domain_add_simple(np, PMIC_IRQ_LIST_MAX, 0,
+					      &hi6421v600_domain_ops, priv);
+	if (!priv->domain) {
+		dev_err(dev, "Failed to create IRQ domain\n");
+		return -ENODEV;
+	}
+
+	for (i = 0; i < PMIC_IRQ_LIST_MAX; i++) {
+		virq = irq_create_mapping(priv->domain, i);
+		if (!virq) {
+			dev_err(dev, "Failed to map H/W IRQ\n");
+			return -ENODEV;
+		}
+		priv->irqs[i] = virq;
+	}
+
+	ret = devm_request_threaded_irq(dev,
+					priv->irq, hi6421v600_irq_handler,
+					NULL,
+				        IRQF_TRIGGER_LOW | IRQF_SHARED | IRQF_NO_SUSPEND,
+				        "pmic", priv);
+	if (ret < 0) {
+		dev_err(dev, "Failed to start IRQ handling thread: error %d\n",
+			ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct platform_device_id hi6421v600_irq_table[] = {
+	{ .name = "hi6421v600-irq" },
+	{},
+};
+MODULE_DEVICE_TABLE(platform, hi6421v600_irq_table);
+
+static struct platform_driver hi6421v600_irq_driver = {
+	.id_table = hi6421v600_irq_table,
+	.driver = {
+		.name = "hi6421v600-irq",
+	},
+	.probe	= hi6421v600_irq_probe,
+};
+module_platform_driver(hi6421v600_irq_driver);
+
+MODULE_DESCRIPTION("HiSilicon Hi6421v600 IRQ driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/staging/hikey9xx/hi6421-spmi-pmic.c b/drivers/staging/hikey9xx/hi6421-spmi-pmic.c
index 35ef3d4c760b..0b5686655954 100644
--- a/drivers/staging/hikey9xx/hi6421-spmi-pmic.c
+++ b/drivers/staging/hikey9xx/hi6421-spmi-pmic.c
@@ -7,205 +7,19 @@
  * Copyright (c) 2020-2021 Huawei Technologies Co., Ltd
  */
 
-#include <linux/bitops.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
 #include <linux/mfd/core.h>
 #include <linux/mfd/hi6421-spmi-pmic.h>
 #include <linux/module.h>
-#include <linux/of_gpio.h>
 #include <linux/platform_device.h>
+#include <linux/regmap.h>
 #include <linux/slab.h>
 #include <linux/spmi.h>
 
-enum hi6421_spmi_pmic_irq_list {
-	OTMP = 0,
-	VBUS_CONNECT,
-	VBUS_DISCONNECT,
-	ALARMON_R,
-	HOLD_6S,
-	HOLD_1S,
-	POWERKEY_UP,
-	POWERKEY_DOWN,
-	OCP_SCP_R,
-	COUL_R,
-	SIM0_HPD_R,
-	SIM0_HPD_F,
-	SIM1_HPD_R,
-	SIM1_HPD_F,
-
-	PMIC_IRQ_LIST_MAX
-};
-
-#define HISI_IRQ_BANK_SIZE		2
-
-/*
- * IRQ number for the power key button and mask for both UP and DOWN IRQs
- */
-#define HISI_POWERKEY_IRQ_NUM		0
-#define HISI_IRQ_POWERKEY_UP_DOWN	(BIT(POWERKEY_DOWN) | BIT(POWERKEY_UP))
-
-/*
- * Registers for IRQ address and IRQ mask bits
- *
- * Please notice that we need to regmap a larger region, as other
- * registers are used by the regulators.
- * See drivers/regulator/hi6421-regulator.c.
- */
-#define SOC_PMIC_IRQ_MASK_0_ADDR	0x0202
-#define SOC_PMIC_IRQ0_ADDR		0x0212
-
-/*
- * The IRQs are mapped as:
- *
- *	======================  =============   ============	=====
- *	IRQ			MASK REGISTER	IRQ REGISTER	BIT
- *	======================  =============   ============	=====
- *	OTMP			0x0202		0x212		bit 0
- *	VBUS_CONNECT		0x0202		0x212		bit 1
- *	VBUS_DISCONNECT		0x0202		0x212		bit 2
- *	ALARMON_R		0x0202		0x212		bit 3
- *	HOLD_6S			0x0202		0x212		bit 4
- *	HOLD_1S			0x0202		0x212		bit 5
- *	POWERKEY_UP		0x0202		0x212		bit 6
- *	POWERKEY_DOWN		0x0202		0x212		bit 7
- *
- *	OCP_SCP_R		0x0203		0x213		bit 0
- *	COUL_R			0x0203		0x213		bit 1
- *	SIM0_HPD_R		0x0203		0x213		bit 2
- *	SIM0_HPD_F		0x0203		0x213		bit 3
- *	SIM1_HPD_R		0x0203		0x213		bit 4
- *	SIM1_HPD_F		0x0203		0x213		bit 5
- *	======================  =============   ============	=====
- *
- * Each mask register contains 8 bits. The ancillary macros below
- * convert a number from 0 to 14 into a register address and a bit mask
- */
-#define HISI_IRQ_MASK_REG(irq_data)	(SOC_PMIC_IRQ_MASK_0_ADDR + \
-					 (irqd_to_hwirq(irq_data) / BITS_PER_BYTE))
-#define HISI_IRQ_MASK_BIT(irq_data)	BIT(irqd_to_hwirq(irq_data) & (BITS_PER_BYTE - 1))
-#define HISI_8BITS_MASK			0xff
-
 static const struct mfd_cell hi6421v600_devs[] = {
+	{ .name = "hi6421v600-irq", },
 	{ .name = "hi6421v600-regulator", },
 };
 
-static irqreturn_t hi6421_spmi_irq_handler(int irq, void *priv)
-{
-	struct hi6421_spmi_pmic *ddata = (struct hi6421_spmi_pmic *)priv;
-	unsigned long pending;
-	unsigned int in;
-	int i, offset;
-
-	for (i = 0; i < HISI_IRQ_BANK_SIZE; i++) {
-		regmap_read(ddata->regmap, SOC_PMIC_IRQ0_ADDR + i, &in);
-
-		/* Mark pending IRQs as handled */
-		regmap_write(ddata->regmap, SOC_PMIC_IRQ0_ADDR + i, in);
-
-		pending = in & HISI_8BITS_MASK;
-
-		if (i == HISI_POWERKEY_IRQ_NUM &&
-		    (pending & HISI_IRQ_POWERKEY_UP_DOWN) == HISI_IRQ_POWERKEY_UP_DOWN) {
-			/*
-			 * If both powerkey down and up IRQs are received,
-			 * handle them at the right order
-			 */
-			generic_handle_irq(ddata->irqs[POWERKEY_DOWN]);
-			generic_handle_irq(ddata->irqs[POWERKEY_UP]);
-			pending &= ~HISI_IRQ_POWERKEY_UP_DOWN;
-		}
-
-		if (!pending)
-			continue;
-
-		for_each_set_bit(offset, &pending, BITS_PER_BYTE) {
-			generic_handle_irq(ddata->irqs[offset + i * BITS_PER_BYTE]);
-		}
-	}
-
-	return IRQ_HANDLED;
-}
-
-static void hi6421_spmi_irq_mask(struct irq_data *d)
-{
-	struct hi6421_spmi_pmic *ddata = irq_data_get_irq_chip_data(d);
-	unsigned long flags;
-	unsigned int data;
-	u32 offset;
-
-	offset = HISI_IRQ_MASK_REG(d);
-
-	spin_lock_irqsave(&ddata->lock, flags);
-
-	regmap_read(ddata->regmap, offset, &data);
-	data |= HISI_IRQ_MASK_BIT(d);
-	regmap_write(ddata->regmap, offset, data);
-
-	spin_unlock_irqrestore(&ddata->lock, flags);
-}
-
-static void hi6421_spmi_irq_unmask(struct irq_data *d)
-{
-	struct hi6421_spmi_pmic *ddata = irq_data_get_irq_chip_data(d);
-	u32 data, offset;
-	unsigned long flags;
-
-	offset = HISI_IRQ_MASK_REG(d);
-
-	spin_lock_irqsave(&ddata->lock, flags);
-
-	regmap_read(ddata->regmap, offset, &data);
-	data &= ~HISI_IRQ_MASK_BIT(d);
-	regmap_write(ddata->regmap, offset, data);
-
-	spin_unlock_irqrestore(&ddata->lock, flags);
-}
-
-static struct irq_chip hi6421_spmi_pmu_irqchip = {
-	.name		= "hi6421v600-irq",
-	.irq_mask	= hi6421_spmi_irq_mask,
-	.irq_unmask	= hi6421_spmi_irq_unmask,
-	.irq_disable	= hi6421_spmi_irq_mask,
-	.irq_enable	= hi6421_spmi_irq_unmask,
-};
-
-static int hi6421_spmi_irq_map(struct irq_domain *d, unsigned int virq,
-			       irq_hw_number_t hw)
-{
-	struct hi6421_spmi_pmic *ddata = d->host_data;
-
-	irq_set_chip_and_handler_name(virq, &hi6421_spmi_pmu_irqchip,
-				      handle_simple_irq, "hi6421v600");
-	irq_set_chip_data(virq, ddata);
-	irq_set_irq_type(virq, IRQ_TYPE_NONE);
-
-	return 0;
-}
-
-static const struct irq_domain_ops hi6421_spmi_domain_ops = {
-	.map	= hi6421_spmi_irq_map,
-	.xlate	= irq_domain_xlate_twocell,
-};
-
-static void hi6421_spmi_pmic_irq_init(struct hi6421_spmi_pmic *ddata)
-{
-	int i;
-	unsigned int pending;
-
-	/* Mask all IRQs */
-	for (i = 0; i < HISI_IRQ_BANK_SIZE; i++)
-		regmap_write(ddata->regmap, SOC_PMIC_IRQ_MASK_0_ADDR + i,
-			     HISI_8BITS_MASK);
-
-	/* Mark all IRQs as handled */
-	for (i = 0; i < HISI_IRQ_BANK_SIZE; i++) {
-		regmap_read(ddata->regmap, SOC_PMIC_IRQ0_ADDR + i, &pending);
-		regmap_write(ddata->regmap, SOC_PMIC_IRQ0_ADDR + i,
-			     HISI_8BITS_MASK);
-	}
-}
-
 static const struct regmap_config regmap_config = {
 	.reg_bits	= 16,
 	.val_bits	= BITS_PER_BYTE,
@@ -216,11 +30,8 @@ static const struct regmap_config regmap_config = {
 static int hi6421_spmi_pmic_probe(struct spmi_device *pdev)
 {
 	struct device *dev = &pdev->dev;
-	struct device_node *np = dev->of_node;
+	int ret;
 	struct hi6421_spmi_pmic *ddata;
-	unsigned int virq;
-	int ret, i;
-
 	ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL);
 	if (!ddata)
 		return -ENOMEM;
@@ -229,58 +40,8 @@ static int hi6421_spmi_pmic_probe(struct spmi_device *pdev)
 	if (IS_ERR(ddata->regmap))
 		return PTR_ERR(ddata->regmap);
 
-	spin_lock_init(&ddata->lock);
-
 	ddata->dev = dev;
 
-	ddata->gpio = of_get_gpio(np, 0);
-	if (ddata->gpio < 0)
-		return ddata->gpio;
-
-	if (!gpio_is_valid(ddata->gpio))
-		return -EINVAL;
-
-	ret = devm_gpio_request_one(dev, ddata->gpio, GPIOF_IN, "pmic");
-	if (ret < 0) {
-		dev_err(dev, "Failed to request gpio%d\n", ddata->gpio);
-		return ret;
-	}
-
-	ddata->irq = gpio_to_irq(ddata->gpio);
-
-	hi6421_spmi_pmic_irq_init(ddata);
-
-	ddata->irqs = devm_kzalloc(dev, PMIC_IRQ_LIST_MAX * sizeof(int), GFP_KERNEL);
-	if (!ddata->irqs)
-		return -ENOMEM;
-
-	ddata->domain = irq_domain_add_simple(np, PMIC_IRQ_LIST_MAX, 0,
-					      &hi6421_spmi_domain_ops, ddata);
-	if (!ddata->domain) {
-		dev_err(dev, "Failed to create IRQ domain\n");
-		return -ENODEV;
-	}
-
-	for (i = 0; i < PMIC_IRQ_LIST_MAX; i++) {
-		virq = irq_create_mapping(ddata->domain, i);
-		if (!virq) {
-			dev_err(dev, "Failed to map H/W IRQ\n");
-			return -ENODEV;
-		}
-		ddata->irqs[i] = virq;
-	}
-
-	ret = devm_request_threaded_irq(dev,
-					ddata->irq, hi6421_spmi_irq_handler,
-					NULL,
-				        IRQF_TRIGGER_LOW | IRQF_SHARED | IRQF_NO_SUSPEND,
-				        "pmic", ddata);
-	if (ret < 0) {
-		dev_err(dev, "Failed to start IRQ handling thread: error %d\n",
-			ret);
-		return ret;
-	}
-
 	dev_set_drvdata(&pdev->dev, ddata);
 
 	ret = devm_mfd_add_devices(&pdev->dev, PLATFORM_DEVID_NONE,
diff --git a/include/linux/mfd/hi6421-spmi-pmic.h b/include/linux/mfd/hi6421-spmi-pmic.h
index 2660226138b8..e5b8dbf828b6 100644
--- a/include/linux/mfd/hi6421-spmi-pmic.h
+++ b/include/linux/mfd/hi6421-spmi-pmic.h
@@ -19,11 +19,6 @@ struct hi6421_spmi_pmic {
 	struct resource				*res;
 	struct device				*dev;
 	void __iomem				*regs;
-	spinlock_t				lock;
-	struct irq_domain			*domain;
-	int					irq;
-	int					gpio;
-	unsigned int				*irqs;
 	struct regmap				*regmap;
 };
 
-- 
2.31.1


^ permalink raw reply related	[flat|nested] 9+ messages in thread

* [PATCH v9 2/5] regulator: hi6421v600-regulator: fix platform drvdata
  2021-06-25 17:06 [PATCH v9 0/5] Move Hisilicon 6421v600 SPMI and USB drivers out of staging Mauro Carvalho Chehab
  2021-06-25 17:06 ` [PATCH v9 1/5] staging: hikey9xx: split hi6421v600 irq into a separate driver Mauro Carvalho Chehab
@ 2021-06-25 17:06 ` Mauro Carvalho Chehab
  2021-06-26  3:41   ` Axel Lin
  2021-06-25 17:06 ` [PATCH v9 3/5] mfd: hi6421-spmi-pmic: move driver from staging Mauro Carvalho Chehab
                   ` (2 subsequent siblings)
  4 siblings, 1 reply; 9+ messages in thread
From: Mauro Carvalho Chehab @ 2021-06-25 17:06 UTC (permalink / raw)
  To: Greg Kroah-Hartman
  Cc: linuxarm, mauro.chehab, Mauro Carvalho Chehab, Lee Jones,
	Axel Lin, Liam Girdwood, Mark Brown, linux-kernel, linux-staging

platform drvdata can't be used inside the regulator driver,
as this is already used by the MFD and SPMI drivers.

So, change the logic to allocate it inside the
struct hi6421_spmi_pmic.

While here, drop the unused fields there.

Fixes: 50e629362e1f ("regulator: hi6421v600: Fix setting wrong driver_data")

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/regulator/hi6421v600-regulator.c    | 26 +++++++++------------
 drivers/staging/hikey9xx/hi6421-spmi-pmic.c |  2 +-
 include/linux/mfd/hi6421-spmi-pmic.h        |  9 +++----
 3 files changed, 17 insertions(+), 20 deletions(-)

diff --git a/drivers/regulator/hi6421v600-regulator.c b/drivers/regulator/hi6421v600-regulator.c
index 9b162c0555c3..49d83350435c 100644
--- a/drivers/regulator/hi6421v600-regulator.c
+++ b/drivers/regulator/hi6421v600-regulator.c
@@ -16,15 +16,13 @@
 #include <linux/regulator/driver.h>
 #include <linux/spmi.h>
 
-struct hi6421_spmi_reg_priv {
-	/* Serialize regulator enable logic */
-	struct mutex enable_mutex;
-};
-
 struct hi6421_spmi_reg_info {
 	struct regulator_desc	desc;
 	u8			eco_mode_mask;
 	u32			eco_uA;
+
+	/* Serialize regulator enable logic */
+	struct mutex		*enable_mutex;
 };
 
 static const unsigned int ldo3_voltages[] = {
@@ -98,12 +96,11 @@ static const unsigned int ldo34_voltages[] = {
 
 static int hi6421_spmi_regulator_enable(struct regulator_dev *rdev)
 {
-	struct hi6421_spmi_reg_priv *priv;
+	struct hi6421_spmi_reg_info *sreg = rdev_get_drvdata(rdev);
 	int ret;
 
-	priv = dev_get_drvdata(rdev->dev.parent);
 	/* cannot enable more than one regulator at one time */
-	mutex_lock(&priv->enable_mutex);
+	mutex_lock(sreg->enable_mutex);
 
 	ret = regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
 				 rdev->desc->enable_mask,
@@ -112,7 +109,7 @@ static int hi6421_spmi_regulator_enable(struct regulator_dev *rdev)
 	/* Avoid powering up multiple devices at the same time */
 	usleep_range(rdev->desc->off_on_delay, rdev->desc->off_on_delay + 60);
 
-	mutex_unlock(&priv->enable_mutex);
+	mutex_unlock(sreg->enable_mutex);
 
 	return ret;
 }
@@ -231,7 +228,7 @@ static int hi6421_spmi_regulator_probe(struct platform_device *pdev)
 {
 	struct device *pmic_dev = pdev->dev.parent;
 	struct regulator_config config = { };
-	struct hi6421_spmi_reg_priv *priv;
+	struct hi6421_spmi_reg_info *sreg;
 	struct hi6421_spmi_reg_info *info;
 	struct device *dev = &pdev->dev;
 	struct hi6421_spmi_pmic *pmic;
@@ -247,18 +244,17 @@ static int hi6421_spmi_regulator_probe(struct platform_device *pdev)
 	if (WARN_ON(!pmic))
 		return -ENODEV;
 
-	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
-	if (!priv)
+	sreg = devm_kzalloc(dev, sizeof(*sreg), GFP_KERNEL);
+	if (!sreg)
 		return -ENOMEM;
 
-	mutex_init(&priv->enable_mutex);
-	platform_set_drvdata(pdev, priv);
+	sreg->enable_mutex = &pmic->enable_mutex;
 
 	for (i = 0; i < ARRAY_SIZE(regulator_info); i++) {
 		info = &regulator_info[i];
 
 		config.dev = pdev->dev.parent;
-		config.driver_data = info;
+		config.driver_data = sreg;
 		config.regmap = pmic->regmap;
 
 		rdev = devm_regulator_register(dev, &info->desc, &config);
diff --git a/drivers/staging/hikey9xx/hi6421-spmi-pmic.c b/drivers/staging/hikey9xx/hi6421-spmi-pmic.c
index 0b5686655954..6864a19f3218 100644
--- a/drivers/staging/hikey9xx/hi6421-spmi-pmic.c
+++ b/drivers/staging/hikey9xx/hi6421-spmi-pmic.c
@@ -40,7 +40,7 @@ static int hi6421_spmi_pmic_probe(struct spmi_device *pdev)
 	if (IS_ERR(ddata->regmap))
 		return PTR_ERR(ddata->regmap);
 
-	ddata->dev = dev;
+	mutex_init(&ddata->enable_mutex);
 
 	dev_set_drvdata(&pdev->dev, ddata);
 
diff --git a/include/linux/mfd/hi6421-spmi-pmic.h b/include/linux/mfd/hi6421-spmi-pmic.h
index e5b8dbf828b6..a72b2797a997 100644
--- a/include/linux/mfd/hi6421-spmi-pmic.h
+++ b/include/linux/mfd/hi6421-spmi-pmic.h
@@ -16,10 +16,11 @@
 #include <linux/regmap.h>
 
 struct hi6421_spmi_pmic {
-	struct resource				*res;
-	struct device				*dev;
-	void __iomem				*regs;
-	struct regmap				*regmap;
+	/* Serialize regulator enable logic */
+	struct mutex	enable_mutex;
+
+	/* SPMI register regmap */
+	struct regmap	*regmap;
 };
 
 #endif		/* __HISI_PMIC_H */
-- 
2.31.1


^ permalink raw reply related	[flat|nested] 9+ messages in thread

* [PATCH v9 3/5] mfd: hi6421-spmi-pmic: move driver from staging
  2021-06-25 17:06 [PATCH v9 0/5] Move Hisilicon 6421v600 SPMI and USB drivers out of staging Mauro Carvalho Chehab
  2021-06-25 17:06 ` [PATCH v9 1/5] staging: hikey9xx: split hi6421v600 irq into a separate driver Mauro Carvalho Chehab
  2021-06-25 17:06 ` [PATCH v9 2/5] regulator: hi6421v600-regulator: fix platform drvdata Mauro Carvalho Chehab
@ 2021-06-25 17:06 ` Mauro Carvalho Chehab
  2021-06-28  8:13   ` Dan Carpenter
  2021-06-25 17:06 ` [PATCH v9 4/5] dts: hisilicon: add support for the PMIC found on Hikey 970 Mauro Carvalho Chehab
  2021-06-25 17:06 ` [PATCH v9 5/5] dts: hisilicon: add support for USB3 " Mauro Carvalho Chehab
  4 siblings, 1 reply; 9+ messages in thread
From: Mauro Carvalho Chehab @ 2021-06-25 17:06 UTC (permalink / raw)
  To: Greg Kroah-Hartman
  Cc: linuxarm, mauro.chehab, Mauro Carvalho Chehab, Lee Jones,
	Rob Herring, devicetree, linux-kernel, linux-staging

This driver is ready for mainstream. So, move it out of staging.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 .../mfd/hisilicon,hi6421-spmi-pmic.yaml       | 134 ++++++++++++++++++
 MAINTAINERS                                   |   7 +
 drivers/mfd/Kconfig                           |  16 +++
 drivers/mfd/Makefile                          |   1 +
 drivers/mfd/hi6421-spmi-pmic.c                |  72 ++++++++++
 drivers/staging/Kconfig                       |   2 -
 drivers/staging/Makefile                      |   1 -
 drivers/staging/hikey9xx/Kconfig              |  19 ---
 drivers/staging/hikey9xx/Makefile             |   3 -
 drivers/staging/hikey9xx/TODO                 |   5 -
 drivers/staging/hikey9xx/hi6421-spmi-pmic.c   |  72 ----------
 .../hikey9xx/hisilicon,hi6421-spmi-pmic.yaml  | 134 ------------------
 12 files changed, 230 insertions(+), 236 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
 create mode 100644 drivers/mfd/hi6421-spmi-pmic.c
 delete mode 100644 drivers/staging/hikey9xx/Kconfig
 delete mode 100644 drivers/staging/hikey9xx/Makefile
 delete mode 100644 drivers/staging/hikey9xx/TODO
 delete mode 100644 drivers/staging/hikey9xx/hi6421-spmi-pmic.c
 delete mode 100644 drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml

diff --git a/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml b/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
new file mode 100644
index 000000000000..8e355cddd437
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/hisilicon,hi6421-spmi-pmic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HiSilicon 6421v600 SPMI PMIC
+
+maintainers:
+  - Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+
+description: |
+  HiSilicon 6421v600 should be connected inside a MIPI System Power Management
+  (SPMI) bus. It provides interrupts and power supply.
+
+  The GPIO and interrupt settings are represented as part of the top-level PMIC
+  node.
+
+  The SPMI controller part is provided by
+  Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
+
+properties:
+  $nodename:
+    pattern: "pmic@[0-9a-f]"
+
+  compatible:
+    const: hisilicon,hi6421v600-spmi
+
+  reg:
+    maxItems: 1
+
+  '#interrupt-cells':
+    const: 2
+
+  interrupt-controller: true
+
+  gpios:
+    maxItems: 1
+    description: GPIO used for IRQs
+
+  regulators:
+    type: object
+
+    properties:
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+    patternProperties:
+      '^ldo[0-9]+@[0-9a-f]$':
+        type: object
+
+        $ref: "/schemas/regulator/regulator.yaml#"
+
+required:
+  - compatible
+  - reg
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    /* pmic properties */
+
+    pmic: pmic@0 {
+      compatible = "hisilicon,hi6421-spmi";
+      reg = <0 0>;
+
+      #interrupt-cells = <2>;
+      interrupt-controller;
+      gpios = <&gpio28 0 0>;
+
+      regulators {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ldo3: LDO3 {
+          regulator-name = "ldo3";
+          regulator-min-microvolt = <1500000>;
+          regulator-max-microvolt = <2000000>;
+          regulator-boot-on;
+        };
+
+        ldo4: LDO4 {
+          regulator-name = "ldo4";
+          regulator-min-microvolt = <1725000>;
+          regulator-max-microvolt = <1900000>;
+          regulator-boot-on;
+        };
+
+        ldo9: LDO9 {
+          regulator-name = "ldo9";
+          regulator-min-microvolt = <1750000>;
+          regulator-max-microvolt = <3300000>;
+          regulator-boot-on;
+        };
+
+        ldo15: LDO15 {
+          regulator-name = "ldo15";
+          regulator-min-microvolt = <1800000>;
+          regulator-max-microvolt = <3000000>;
+          regulator-always-on;
+        };
+
+        ldo16: LDO16 {
+          regulator-name = "ldo16";
+          regulator-min-microvolt = <1800000>;
+          regulator-max-microvolt = <3000000>;
+          regulator-boot-on;
+        };
+
+        ldo17: LDO17 {
+          regulator-name = "ldo17";
+          regulator-min-microvolt = <2500000>;
+          regulator-max-microvolt = <3300000>;
+        };
+
+        ldo33: LDO33 {
+          regulator-name = "ldo33";
+          regulator-min-microvolt = <2500000>;
+          regulator-max-microvolt = <3300000>;
+          regulator-boot-on;
+        };
+
+        ldo34: LDO34 {
+          regulator-name = "ldo34";
+          regulator-min-microvolt = <2600000>;
+          regulator-max-microvolt = <3300000>;
+        };
+      };
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index 9a69e3810964..89e84b050de6 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8291,6 +8291,13 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml
 F:	drivers/spmi/hisi-spmi-controller.c
 
+HISILICON SPMI PMIC DRIVER FOR HIKEY 6421v600
+M:	Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+L:	linux-kernel@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
+F:	drivers/mfd/hi6421-spmi-pmic.c
+
 HISILICON STAGING DRIVERS FOR HIKEY 960/970
 M:	Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
 S:	Maintained
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 5c7f2b100191..99b8da2548b5 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -509,6 +509,22 @@ config MFD_HI6421_PMIC
 	  menus in order to enable them.
 	  We communicate with the Hi6421 via memory-mapped I/O.
 
+config MFD_HI6421_SPMI
+	tristate "HiSilicon Hi6421v600 SPMI PMU/Codec IC"
+	depends on OF
+	depends on SPMI
+	select MFD_CORE
+	select REGMAP_SPMI
+	help
+	  Add support for HiSilicon Hi6421v600 SPMI PMIC. Hi6421 includes
+	  multi-functions, such as regulators, RTC, codec, Coulomb counter,
+	  etc.
+
+	  This driver includes core APIs _only_. You have to select
+	  individual components like voltage regulators under corresponding
+	  menus in order to enable them.
+	  We communicate with the Hi6421v600 via a SPMI bus.
+
 config MFD_HI655X_PMIC
 	tristate "HiSilicon Hi655X series PMU/Codec IC"
 	depends on ARCH_HISI || COMPILE_TEST
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 4f6d2b8a5f76..e87230fc61ac 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -232,6 +232,7 @@ obj-$(CONFIG_MFD_IPAQ_MICRO)	+= ipaq-micro.o
 obj-$(CONFIG_MFD_IQS62X)	+= iqs62x.o
 obj-$(CONFIG_MFD_MENF21BMC)	+= menf21bmc.o
 obj-$(CONFIG_MFD_HI6421_PMIC)	+= hi6421-pmic-core.o
+obj-$(CONFIG_MFD_HI6421_SPMI)	+= hi6421-spmi-pmic.o
 obj-$(CONFIG_MFD_HI655X_PMIC)   += hi655x-pmic.o
 obj-$(CONFIG_MFD_DLN2)		+= dln2.o
 obj-$(CONFIG_MFD_RT5033)	+= rt5033.o
diff --git a/drivers/mfd/hi6421-spmi-pmic.c b/drivers/mfd/hi6421-spmi-pmic.c
new file mode 100644
index 000000000000..6864a19f3218
--- /dev/null
+++ b/drivers/mfd/hi6421-spmi-pmic.c
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device driver for regulators in HISI PMIC IC
+ *
+ * Copyright (c) 2013 Linaro Ltd.
+ * Copyright (c) 2011 Hisilicon.
+ * Copyright (c) 2020-2021 Huawei Technologies Co., Ltd
+ */
+
+#include <linux/mfd/core.h>
+#include <linux/mfd/hi6421-spmi-pmic.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/spmi.h>
+
+static const struct mfd_cell hi6421v600_devs[] = {
+	{ .name = "hi6421v600-irq", },
+	{ .name = "hi6421v600-regulator", },
+};
+
+static const struct regmap_config regmap_config = {
+	.reg_bits	= 16,
+	.val_bits	= BITS_PER_BYTE,
+	.max_register	= 0xffff,
+	.fast_io	= true
+};
+
+static int hi6421_spmi_pmic_probe(struct spmi_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	int ret;
+	struct hi6421_spmi_pmic *ddata;
+	ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL);
+	if (!ddata)
+		return -ENOMEM;
+
+	ddata->regmap = devm_regmap_init_spmi_ext(pdev, &regmap_config);
+	if (IS_ERR(ddata->regmap))
+		return PTR_ERR(ddata->regmap);
+
+	mutex_init(&ddata->enable_mutex);
+
+	dev_set_drvdata(&pdev->dev, ddata);
+
+	ret = devm_mfd_add_devices(&pdev->dev, PLATFORM_DEVID_NONE,
+				   hi6421v600_devs, ARRAY_SIZE(hi6421v600_devs),
+				   NULL, 0, NULL);
+	if (ret < 0)
+		dev_err(dev, "Failed to add child devices: %d\n", ret);
+
+	return ret;
+}
+
+static const struct of_device_id pmic_spmi_id_table[] = {
+	{ .compatible = "hisilicon,hi6421-spmi" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, pmic_spmi_id_table);
+
+static struct spmi_driver hi6421_spmi_pmic_driver = {
+	.driver = {
+		.name	= "hi6421-spmi-pmic",
+		.of_match_table = pmic_spmi_id_table,
+	},
+	.probe	= hi6421_spmi_pmic_probe,
+};
+module_spmi_driver(hi6421_spmi_pmic_driver);
+
+MODULE_DESCRIPTION("HiSilicon Hi6421v600 SPMI PMIC driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index b7ae5bdc4eb5..5b4267d3ed6b 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -104,6 +104,4 @@ source "drivers/staging/qlge/Kconfig"
 
 source "drivers/staging/wfx/Kconfig"
 
-source "drivers/staging/hikey9xx/Kconfig"
-
 endif # STAGING
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index 075c979bfe7c..7179cdcaafe7 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -42,4 +42,3 @@ obj-$(CONFIG_FIELDBUS_DEV)     += fieldbus/
 obj-$(CONFIG_KPC2000)		+= kpc2000/
 obj-$(CONFIG_QLGE)		+= qlge/
 obj-$(CONFIG_WFX)		+= wfx/
-obj-y				+= hikey9xx/
diff --git a/drivers/staging/hikey9xx/Kconfig b/drivers/staging/hikey9xx/Kconfig
deleted file mode 100644
index 9f53df9068fe..000000000000
--- a/drivers/staging/hikey9xx/Kconfig
+++ /dev/null
@@ -1,19 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-
-# to be placed at drivers/mfd
-config MFD_HI6421_SPMI
-	tristate "HiSilicon Hi6421v600 SPMI PMU/Codec IC"
-	depends on HAS_IOMEM
-	depends on OF
-	depends on SPMI
-	select MFD_CORE
-	select REGMAP_SPMI
-	help
-	  Add support for HiSilicon Hi6421v600 SPMI PMIC. Hi6421 includes
-	  multi-functions, such as regulators, RTC, codec, Coulomb counter,
-	  etc.
-
-	  This driver includes core APIs _only_. You have to select
-	  individual components like voltage regulators under corresponding
-	  menus in order to enable them.
-	  We communicate with the Hi6421v600 via a SPMI bus.
diff --git a/drivers/staging/hikey9xx/Makefile b/drivers/staging/hikey9xx/Makefile
deleted file mode 100644
index e3108d7dd849..000000000000
--- a/drivers/staging/hikey9xx/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-
-obj-$(CONFIG_MFD_HI6421_SPMI)		+= hi6421-spmi-pmic.o
diff --git a/drivers/staging/hikey9xx/TODO b/drivers/staging/hikey9xx/TODO
deleted file mode 100644
index 65e7996a3066..000000000000
--- a/drivers/staging/hikey9xx/TODO
+++ /dev/null
@@ -1,5 +0,0 @@
-ToDo list:
-
-- Port other drivers needed by Hikey 960/970;
-- Test drivers on Hikey 960;
-- Validate device tree bindings.
diff --git a/drivers/staging/hikey9xx/hi6421-spmi-pmic.c b/drivers/staging/hikey9xx/hi6421-spmi-pmic.c
deleted file mode 100644
index 6864a19f3218..000000000000
--- a/drivers/staging/hikey9xx/hi6421-spmi-pmic.c
+++ /dev/null
@@ -1,72 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device driver for regulators in HISI PMIC IC
- *
- * Copyright (c) 2013 Linaro Ltd.
- * Copyright (c) 2011 Hisilicon.
- * Copyright (c) 2020-2021 Huawei Technologies Co., Ltd
- */
-
-#include <linux/mfd/core.h>
-#include <linux/mfd/hi6421-spmi-pmic.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/regmap.h>
-#include <linux/slab.h>
-#include <linux/spmi.h>
-
-static const struct mfd_cell hi6421v600_devs[] = {
-	{ .name = "hi6421v600-irq", },
-	{ .name = "hi6421v600-regulator", },
-};
-
-static const struct regmap_config regmap_config = {
-	.reg_bits	= 16,
-	.val_bits	= BITS_PER_BYTE,
-	.max_register	= 0xffff,
-	.fast_io	= true
-};
-
-static int hi6421_spmi_pmic_probe(struct spmi_device *pdev)
-{
-	struct device *dev = &pdev->dev;
-	int ret;
-	struct hi6421_spmi_pmic *ddata;
-	ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL);
-	if (!ddata)
-		return -ENOMEM;
-
-	ddata->regmap = devm_regmap_init_spmi_ext(pdev, &regmap_config);
-	if (IS_ERR(ddata->regmap))
-		return PTR_ERR(ddata->regmap);
-
-	mutex_init(&ddata->enable_mutex);
-
-	dev_set_drvdata(&pdev->dev, ddata);
-
-	ret = devm_mfd_add_devices(&pdev->dev, PLATFORM_DEVID_NONE,
-				   hi6421v600_devs, ARRAY_SIZE(hi6421v600_devs),
-				   NULL, 0, NULL);
-	if (ret < 0)
-		dev_err(dev, "Failed to add child devices: %d\n", ret);
-
-	return ret;
-}
-
-static const struct of_device_id pmic_spmi_id_table[] = {
-	{ .compatible = "hisilicon,hi6421-spmi" },
-	{ }
-};
-MODULE_DEVICE_TABLE(of, pmic_spmi_id_table);
-
-static struct spmi_driver hi6421_spmi_pmic_driver = {
-	.driver = {
-		.name	= "hi6421-spmi-pmic",
-		.of_match_table = pmic_spmi_id_table,
-	},
-	.probe	= hi6421_spmi_pmic_probe,
-};
-module_spmi_driver(hi6421_spmi_pmic_driver);
-
-MODULE_DESCRIPTION("HiSilicon Hi6421v600 SPMI PMIC driver");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml b/drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml
deleted file mode 100644
index 8e355cddd437..000000000000
--- a/drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml
+++ /dev/null
@@ -1,134 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/mfd/hisilicon,hi6421-spmi-pmic.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: HiSilicon 6421v600 SPMI PMIC
-
-maintainers:
-  - Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
-description: |
-  HiSilicon 6421v600 should be connected inside a MIPI System Power Management
-  (SPMI) bus. It provides interrupts and power supply.
-
-  The GPIO and interrupt settings are represented as part of the top-level PMIC
-  node.
-
-  The SPMI controller part is provided by
-  Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
-
-properties:
-  $nodename:
-    pattern: "pmic@[0-9a-f]"
-
-  compatible:
-    const: hisilicon,hi6421v600-spmi
-
-  reg:
-    maxItems: 1
-
-  '#interrupt-cells':
-    const: 2
-
-  interrupt-controller: true
-
-  gpios:
-    maxItems: 1
-    description: GPIO used for IRQs
-
-  regulators:
-    type: object
-
-    properties:
-      '#address-cells':
-        const: 1
-
-      '#size-cells':
-        const: 0
-
-    patternProperties:
-      '^ldo[0-9]+@[0-9a-f]$':
-        type: object
-
-        $ref: "/schemas/regulator/regulator.yaml#"
-
-required:
-  - compatible
-  - reg
-  - regulators
-
-additionalProperties: false
-
-examples:
-  - |
-    /* pmic properties */
-
-    pmic: pmic@0 {
-      compatible = "hisilicon,hi6421-spmi";
-      reg = <0 0>;
-
-      #interrupt-cells = <2>;
-      interrupt-controller;
-      gpios = <&gpio28 0 0>;
-
-      regulators {
-        #address-cells = <1>;
-        #size-cells = <0>;
-
-        ldo3: LDO3 {
-          regulator-name = "ldo3";
-          regulator-min-microvolt = <1500000>;
-          regulator-max-microvolt = <2000000>;
-          regulator-boot-on;
-        };
-
-        ldo4: LDO4 {
-          regulator-name = "ldo4";
-          regulator-min-microvolt = <1725000>;
-          regulator-max-microvolt = <1900000>;
-          regulator-boot-on;
-        };
-
-        ldo9: LDO9 {
-          regulator-name = "ldo9";
-          regulator-min-microvolt = <1750000>;
-          regulator-max-microvolt = <3300000>;
-          regulator-boot-on;
-        };
-
-        ldo15: LDO15 {
-          regulator-name = "ldo15";
-          regulator-min-microvolt = <1800000>;
-          regulator-max-microvolt = <3000000>;
-          regulator-always-on;
-        };
-
-        ldo16: LDO16 {
-          regulator-name = "ldo16";
-          regulator-min-microvolt = <1800000>;
-          regulator-max-microvolt = <3000000>;
-          regulator-boot-on;
-        };
-
-        ldo17: LDO17 {
-          regulator-name = "ldo17";
-          regulator-min-microvolt = <2500000>;
-          regulator-max-microvolt = <3300000>;
-        };
-
-        ldo33: LDO33 {
-          regulator-name = "ldo33";
-          regulator-min-microvolt = <2500000>;
-          regulator-max-microvolt = <3300000>;
-          regulator-boot-on;
-        };
-
-        ldo34: LDO34 {
-          regulator-name = "ldo34";
-          regulator-min-microvolt = <2600000>;
-          regulator-max-microvolt = <3300000>;
-        };
-      };
-    };
-- 
2.31.1


^ permalink raw reply related	[flat|nested] 9+ messages in thread

* [PATCH v9 4/5] dts: hisilicon: add support for the PMIC found on Hikey 970
  2021-06-25 17:06 [PATCH v9 0/5] Move Hisilicon 6421v600 SPMI and USB drivers out of staging Mauro Carvalho Chehab
                   ` (2 preceding siblings ...)
  2021-06-25 17:06 ` [PATCH v9 3/5] mfd: hi6421-spmi-pmic: move driver from staging Mauro Carvalho Chehab
@ 2021-06-25 17:06 ` Mauro Carvalho Chehab
  2021-06-25 17:06 ` [PATCH v9 5/5] dts: hisilicon: add support for USB3 " Mauro Carvalho Chehab
  4 siblings, 0 replies; 9+ messages in thread
From: Mauro Carvalho Chehab @ 2021-06-25 17:06 UTC (permalink / raw)
  To: Greg Kroah-Hartman
  Cc: linuxarm, mauro.chehab, Mauro Carvalho Chehab, Lee Jones,
	Rob Herring, Wei Xu, devicetree, linux-arm-kernel, linux-kernel

Add a device tree for the HiSilicon 6421v600 SPMI PMIC, used
on HiKey970 board.

As we now have support for it, change the fixed regulators
used by the SD I/O to use the proper LDO supplies.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 .../boot/dts/hisilicon/hi3670-hikey970.dts    | 22 +----
 .../boot/dts/hisilicon/hikey970-pmic.dtsi     | 87 +++++++++++++++++++
 2 files changed, 90 insertions(+), 19 deletions(-)
 create mode 100644 arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi

diff --git a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
index 7f9f9886c349..5e6d7b329771 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
@@ -12,6 +12,7 @@
 
 #include "hi3670.dtsi"
 #include "hikey970-pinctrl.dtsi"
+#include "hikey970-pmic.dtsi"
 
 / {
 	model = "HiKey970";
@@ -39,23 +40,6 @@ memory@0 {
 		reg = <0x0 0x0 0x0 0x0>;
 	};
 
-	sd_1v8: regulator-1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-1.8V";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-	};
-
-	sd_3v3: regulator-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "fixed-3.3V";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
 	wlan_en: wlan-en-1-8v {
 		compatible = "regulator-fixed";
 		regulator-name = "wlan-en-regulator";
@@ -402,8 +386,8 @@ &dwmmc1 {
 	pinctrl-0 = <&sd_pmx_func
 		     &sd_clk_cfg_func
 		     &sd_cfg_func>;
-	vmmc-supply = <&sd_3v3>;
-	vqmmc-supply = <&sd_1v8>;
+	vmmc-supply = <&ldo16>;
+	vqmmc-supply = <&ldo9>;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi b/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi
new file mode 100644
index 000000000000..48c739eacba0
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Hi6421v600 SPMI PMIC used at the HiKey970 Development Board
+ *
+ * Copyright (C) 2020, Huawei Tech. Co., Ltd.
+ */
+
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	spmi: spmi@fff24000 {
+		compatible = "hisilicon,kirin970-spmi-controller";
+		#address-cells = <2>;
+		#size-cells = <0>;
+		status = "okay";
+		reg = <0x0 0xfff24000 0x0 0x1000>;
+		hisilicon,spmi-channel = <2>;
+
+		pmic: pmic@0 {
+			compatible = "hisilicon,hi6421-spmi";
+			reg = <0 SPMI_USID>;
+
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			gpios = <&gpio28 0 0>;
+
+			regulators {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ldo3: LDO3 { /* HDMI */
+					regulator-name = "ldo3";
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <2000000>;
+					regulator-boot-on;
+				};
+
+				ldo4: LDO4 { /* 40 PIN */
+					regulator-name = "ldo4";
+					regulator-min-microvolt = <1725000>;
+					regulator-max-microvolt = <1900000>;
+					regulator-boot-on;
+				};
+
+				ldo9: LDO9 { /* SDCARD I/O */
+					regulator-name = "ldo9";
+					regulator-min-microvolt = <1750000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-boot-on;
+				};
+
+				ldo15: LDO15 { /* UFS */
+					regulator-name = "ldo15";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-always-on;
+				};
+
+				ldo16: LDO16 { /* SD */
+					regulator-name = "ldo16";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-boot-on;
+				};
+
+				ldo17: LDO17 { /* USB HUB */
+					regulator-name = "ldo17";
+					regulator-min-microvolt = <2500000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				ldo33: LDO33 { /* PEX8606 */
+					regulator-name = "ldo33";
+					regulator-min-microvolt = <2500000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-boot-on;
+				};
+
+				ldo34: LDO34 { /* GPS AUX IN VDD */
+					regulator-name = "ldo34";
+					regulator-min-microvolt = <2600000>;
+					regulator-max-microvolt = <3300000>;
+				};
+			};
+		};
+	};
+};
-- 
2.31.1


^ permalink raw reply related	[flat|nested] 9+ messages in thread

* [PATCH v9 5/5] dts: hisilicon: add support for USB3 on Hikey 970
  2021-06-25 17:06 [PATCH v9 0/5] Move Hisilicon 6421v600 SPMI and USB drivers out of staging Mauro Carvalho Chehab
                   ` (3 preceding siblings ...)
  2021-06-25 17:06 ` [PATCH v9 4/5] dts: hisilicon: add support for the PMIC found on Hikey 970 Mauro Carvalho Chehab
@ 2021-06-25 17:06 ` Mauro Carvalho Chehab
  4 siblings, 0 replies; 9+ messages in thread
From: Mauro Carvalho Chehab @ 2021-06-25 17:06 UTC (permalink / raw)
  To: Greg Kroah-Hartman
  Cc: linuxarm, mauro.chehab, Mauro Carvalho Chehab, Lee Jones,
	Rob Herring, Wei Xu, devicetree, linux-arm-kernel, linux-kernel

Add the USB3 bindings for Kirin 970 phy and Hikey 970 board.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 .../boot/dts/hisilicon/hi3670-hikey970.dts    | 107 ++++++++++++++++++
 arch/arm64/boot/dts/hisilicon/hi3670.dtsi     |  56 +++++++++
 2 files changed, 163 insertions(+)

diff --git a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
index 5e6d7b329771..9e3dfe877ebe 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
@@ -53,6 +53,30 @@ wlan_en: wlan-en-1-8v {
 		startup-delay-us = <70000>;
 		enable-active-high;
 	};
+
+	hikey_usbhub: hikey_usbhub {
+		compatible = "hisilicon,kirin970_hikey_usbhub";
+
+		typec-vbus-gpios = <&gpio26 1 0>;
+		otg-switch-gpios = <&gpio4 2 0>;
+		hub_reset_en_gpio = <&gpio0 3 0>;
+		hub-vdd-supply = <&ldo17>;
+		usb-role-switch;
+
+		port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			hikey_usb_ep0: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&dwc3_role_switch>;
+			};
+			hikey_usb_ep1: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&rt1711h_ep>;
+			};
+		};
+	};
 };
 
 /*
@@ -430,3 +454,86 @@ &uart6 {
 	label = "LS-UART1";
 	status = "okay";
 };
+
+&usb_phy {
+	phy-supply = <&ldo17>;
+};
+
+&i2c1 {
+	status = "okay";
+
+	rt1711h: rt1711h@4e {
+		compatible = "richtek,rt1711h";
+		reg = <0x4e>;
+		status = "okay";
+		interrupt-parent = <&gpio27>;
+		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_cfg_func>;
+
+		usb_con: connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			data-role = "dual";
+			power-role = "dual";
+			try-power-role = "sink";
+			source-pdos = <PDO_FIXED(5000, 500, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 500, PDO_FIXED_USB_COMM)
+				PDO_VAR(5000, 5000, 1000)>;
+			op-sink-microwatt = <10000000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@1 {
+					reg = <1>;
+					usb_con_ss: endpoint {
+						remote-endpoint = <&dwc3_ss>;
+					};
+				};
+			};
+		};
+		port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			rt1711h_ep: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&hikey_usb_ep1>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	/* USB HUB is on this bus at address 0x44 */
+	status = "okay";
+};
+
+&dwc3 { /* USB */
+	dr_mode = "otg";
+	maximum-speed = "super-speed";
+	phy_type = "utmi";
+	snps,dis-del-phy-power-chg-quirk;
+	snps,dis_u2_susphy_quirk;
+	snps,dis_u3_susphy_quirk;
+	snps,tx_de_emphasis_quirk;
+	snps,tx_de_emphasis = <1>;
+	snps,dis-split-quirk;
+	snps,gctl-reset-quirk;
+	usb-role-switch;
+	role-switch-default-mode = "host";
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		dwc3_role_switch: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&hikey_usb_ep0>;
+		};
+
+		dwc3_ss: endpoint@1 {
+			reg = <1>;
+			remote-endpoint = <&usb_con_ss>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi
index 8830795c8efc..6476149d99e3 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi
@@ -8,6 +8,7 @@
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/hi3670-clock.h>
+#include <dt-bindings/usb/pd.h>
 
 / {
 	compatible = "hisilicon,hi3670";
@@ -785,5 +786,60 @@ i2c4: i2c@fdf0d000 {
 			pinctrl-0 = <&i2c4_pmx_func &i2c4_cfg_func>;
 			status = "disabled";
 		};
+
+		usb3_otg_bc: usb3_otg_bc@ff200000 {
+			compatible = "syscon", "simple-mfd";
+			reg = <0x0 0xff200000 0x0 0x1000>;
+
+			usb_phy: usbphy {
+				compatible = "hisilicon,hi3670-usb-phy";
+				#phy-cells = <0>;
+				hisilicon,pericrg-syscon = <&crg_ctrl>;
+				hisilicon,pctrl-syscon = <&pctrl>;
+				hisilicon,sctrl-syscon = <&sctrl>;
+				hisilicon,eye-diagram-param = <0xFDFEE4>;
+				hisilicon,tx-vboost-lvl = <0x5>;
+			};
+		};
+
+		usb31_misc_rst: usb31_misc_rst_controller {
+			compatible = "hisilicon,hi3660-reset";
+			#reset-cells = <2>;
+			hisi,rst-syscon = <&usb3_otg_bc>;
+		};
+
+		usb3: hisi_dwc3 {
+			compatible = "hisilicon,hi3670-dwc3";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&crg_ctrl HI3670_CLK_GATE_ABB_USB>,
+				  <&crg_ctrl HI3670_HCLK_GATE_USB3OTG>,
+				  <&crg_ctrl HI3670_CLK_GATE_USB3OTG_REF>,
+				  <&crg_ctrl HI3670_ACLK_GATE_USB3DVFS>;
+			clock-names = "clk_gate_abb_usb",
+				      "hclk_gate_usb3otg",
+				      "clk_gate_usb3otg_ref",
+				      "aclk_gate_usb3dvfs";
+
+			assigned-clocks = <&crg_ctrl HI3670_ACLK_GATE_USB3DVFS>;
+			assigned-clock-rates = <238000000>;
+			resets = <&crg_rst 0x90 6>,
+				 <&crg_rst 0x90 7>,
+				 <&usb31_misc_rst 0xA0 8>,
+				 <&usb31_misc_rst 0xA0 9>;
+
+			dwc3: usb@ff100000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0xff100000 0x0 0x100000>;
+
+				interrupts = <0 159 IRQ_TYPE_LEVEL_HIGH>,
+					    <0 161 IRQ_TYPE_LEVEL_HIGH>;
+
+				phys = <&usb_phy>;
+				phy-names = "usb3-phy";
+			};
+		};
 	};
 };
-- 
2.31.1


^ permalink raw reply related	[flat|nested] 9+ messages in thread

* Re: [PATCH v9 2/5] regulator: hi6421v600-regulator: fix platform drvdata
  2021-06-25 17:06 ` [PATCH v9 2/5] regulator: hi6421v600-regulator: fix platform drvdata Mauro Carvalho Chehab
@ 2021-06-26  3:41   ` Axel Lin
  2021-06-29 10:23     ` Mauro Carvalho Chehab
  0 siblings, 1 reply; 9+ messages in thread
From: Axel Lin @ 2021-06-26  3:41 UTC (permalink / raw)
  To: Mauro Carvalho Chehab
  Cc: Greg Kroah-Hartman, linuxarm, mauro.chehab, Lee Jones,
	Liam Girdwood, Mark Brown, LKML, linux-staging

> @@ -231,7 +228,7 @@ static int hi6421_spmi_regulator_probe(struct platform_device *pdev)
>  {
>         struct device *pmic_dev = pdev->dev.parent;
>         struct regulator_config config = { };
> -       struct hi6421_spmi_reg_priv *priv;
> +       struct hi6421_spmi_reg_info *sreg;
>         struct hi6421_spmi_reg_info *info;
>         struct device *dev = &pdev->dev;
>         struct hi6421_spmi_pmic *pmic;
> @@ -247,18 +244,17 @@ static int hi6421_spmi_regulator_probe(struct platform_device *pdev)
>         if (WARN_ON(!pmic))
>                 return -ENODEV;
>
> -       priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> -       if (!priv)
> +       sreg = devm_kzalloc(dev, sizeof(*sreg), GFP_KERNEL);
> +       if (!sreg)
>                 return -ENOMEM;
>
> -       mutex_init(&priv->enable_mutex);
> -       platform_set_drvdata(pdev, priv);
> +       sreg->enable_mutex = &pmic->enable_mutex;
>
>         for (i = 0; i < ARRAY_SIZE(regulator_info); i++) {
>                 info = &regulator_info[i];
>
>                 config.dev = pdev->dev.parent;
> -               config.driver_data = info;
> +               config.driver_data = sreg;

This won't work and that was what my patch fixed.
e.g. When you call
struct hi6421_spmi_reg_info *sreg = rdev_get_drvdata(rdev);
sreg->eco_mode_mask and sreg->eco_uA will always be 0.

Regards,
Axel

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [PATCH v9 3/5] mfd: hi6421-spmi-pmic: move driver from staging
  2021-06-25 17:06 ` [PATCH v9 3/5] mfd: hi6421-spmi-pmic: move driver from staging Mauro Carvalho Chehab
@ 2021-06-28  8:13   ` Dan Carpenter
  0 siblings, 0 replies; 9+ messages in thread
From: Dan Carpenter @ 2021-06-28  8:13 UTC (permalink / raw)
  To: Mauro Carvalho Chehab
  Cc: Greg Kroah-Hartman, linuxarm, mauro.chehab, Lee Jones,
	Rob Herring, devicetree, linux-kernel, linux-staging

On Fri, Jun 25, 2021 at 07:06:12PM +0200, Mauro Carvalho Chehab wrote:
> +static int hi6421_spmi_pmic_probe(struct spmi_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	int ret;
> +	struct hi6421_spmi_pmic *ddata;
> +	ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL);

No blank line.  Checkpatch.

> +	if (!ddata)
> +		return -ENOMEM;
> +
> +	ddata->regmap = devm_regmap_init_spmi_ext(pdev, &regmap_config);
> +	if (IS_ERR(ddata->regmap))
> +		return PTR_ERR(ddata->regmap);
> +
> +	mutex_init(&ddata->enable_mutex);
> +
> +	dev_set_drvdata(&pdev->dev, ddata);
> +
> +	ret = devm_mfd_add_devices(&pdev->dev, PLATFORM_DEVID_NONE,
> +				   hi6421v600_devs, ARRAY_SIZE(hi6421v600_devs),
> +				   NULL, 0, NULL);
> +	if (ret < 0)
> +		dev_err(dev, "Failed to add child devices: %d\n", ret);
> +
> +	return ret;
> +}

regards,
dan carpenter

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: [PATCH v9 2/5] regulator: hi6421v600-regulator: fix platform drvdata
  2021-06-26  3:41   ` Axel Lin
@ 2021-06-29 10:23     ` Mauro Carvalho Chehab
  0 siblings, 0 replies; 9+ messages in thread
From: Mauro Carvalho Chehab @ 2021-06-29 10:23 UTC (permalink / raw)
  To: Axel Lin
  Cc: Greg Kroah-Hartman, linuxarm, mauro.chehab, Lee Jones,
	Liam Girdwood, Mark Brown, LKML, linux-staging

Em Sat, 26 Jun 2021 11:41:50 +0800
Axel Lin <axel.lin@ingics.com> escreveu:

> > @@ -231,7 +228,7 @@ static int hi6421_spmi_regulator_probe(struct platform_device *pdev)
> >  {
> >         struct device *pmic_dev = pdev->dev.parent;
> >         struct regulator_config config = { };
> > -       struct hi6421_spmi_reg_priv *priv;
> > +       struct hi6421_spmi_reg_info *sreg;
> >         struct hi6421_spmi_reg_info *info;
> >         struct device *dev = &pdev->dev;
> >         struct hi6421_spmi_pmic *pmic;
> > @@ -247,18 +244,17 @@ static int hi6421_spmi_regulator_probe(struct platform_device *pdev)
> >         if (WARN_ON(!pmic))
> >                 return -ENODEV;
> >
> > -       priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> > -       if (!priv)
> > +       sreg = devm_kzalloc(dev, sizeof(*sreg), GFP_KERNEL);
> > +       if (!sreg)
> >                 return -ENOMEM;
> >
> > -       mutex_init(&priv->enable_mutex);
> > -       platform_set_drvdata(pdev, priv);
> > +       sreg->enable_mutex = &pmic->enable_mutex;
> >
> >         for (i = 0; i < ARRAY_SIZE(regulator_info); i++) {
> >                 info = &regulator_info[i];
> >
> >                 config.dev = pdev->dev.parent;
> > -               config.driver_data = info;
> > +               config.driver_data = sreg;  
> 
> This won't work and that was what my patch fixed.
> e.g. When you call
> struct hi6421_spmi_reg_info *sreg = rdev_get_drvdata(rdev);
> sreg->eco_mode_mask and sreg->eco_uA will always be 0.

Yeah, probably something got lost during the several rebases. 
Anyway, I'll send in a few a new patch series addressing this issue.

Thanks,
Mauro

^ permalink raw reply	[flat|nested] 9+ messages in thread

end of thread, other threads:[~2021-06-29 10:23 UTC | newest]

Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-06-25 17:06 [PATCH v9 0/5] Move Hisilicon 6421v600 SPMI and USB drivers out of staging Mauro Carvalho Chehab
2021-06-25 17:06 ` [PATCH v9 1/5] staging: hikey9xx: split hi6421v600 irq into a separate driver Mauro Carvalho Chehab
2021-06-25 17:06 ` [PATCH v9 2/5] regulator: hi6421v600-regulator: fix platform drvdata Mauro Carvalho Chehab
2021-06-26  3:41   ` Axel Lin
2021-06-29 10:23     ` Mauro Carvalho Chehab
2021-06-25 17:06 ` [PATCH v9 3/5] mfd: hi6421-spmi-pmic: move driver from staging Mauro Carvalho Chehab
2021-06-28  8:13   ` Dan Carpenter
2021-06-25 17:06 ` [PATCH v9 4/5] dts: hisilicon: add support for the PMIC found on Hikey 970 Mauro Carvalho Chehab
2021-06-25 17:06 ` [PATCH v9 5/5] dts: hisilicon: add support for USB3 " Mauro Carvalho Chehab

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).