From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
To: Kalle Valo <kvalo@codeaurora.org>
Cc: linuxarm@huawei.com, mauro.chehab@huawei.com,
Mauro Carvalho Chehab <mchehab+huawei@kernel.org>,
John Stultz <john.stultz@linaro.org>,
Manivannan Sadhasivam <mani@kernel.org>,
"David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>, Maital Hahn <maitalm@ti.com>,
"Gustavo A. R. Silva" <gustavo@embeddedor.com>,
Raz Bouganim <r-bouganim@ti.com>,
Tony Lindgren <tony@atomide.com>,
Dinghao Liu <dinghao.liu@zju.edu.cn>,
Johannes Berg <johannes.berg@intel.com>,
Fuqian Huang <huangfq.daxian@gmail.com>,
linux-wireless@vger.kernel.org, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH] Revert "wlcore: Adding suppoprt for IGTK key in wlcore driver"
Date: Wed, 26 Aug 2020 07:49:34 +0200 [thread overview]
Message-ID: <f0a2cb7ea606f1a284d4c23cbf983da2954ce9b6.1598420968.git.mchehab+huawei@kernel.org> (raw)
This patch causes a regression betwen Kernel 5.7 and 5.8 at wlcore:
with it applied, WiFi stops working, and the Kernel starts printing
this message every second:
wlcore: PHY firmware version: Rev 8.2.0.0.242
wlcore: firmware booted (Rev 8.9.0.0.79)
wlcore: ERROR command execute failure 14
------------[ cut here ]------------
WARNING: CPU: 0 PID: 133 at drivers/net/wireless/ti/wlcore/main.c:795 wl12xx_queue_recovery_work.part.0+0x6c/0x74 [wlcore]
Modules linked in: wl18xx wlcore mac80211 libarc4 cfg80211 rfkill snd_soc_hdmi_codec crct10dif_ce wlcore_sdio adv7511 cec kirin9xx_drm(C) kirin9xx_dw_drm_dsi(C) drm_kms_helper drm ip_tables x_tables ipv6 nf_defrag_ipv6
CPU: 0 PID: 133 Comm: kworker/0:1 Tainted: G WC 5.8.0+ #186
Hardware name: HiKey970 (DT)
Workqueue: events_freezable ieee80211_restart_work [mac80211]
pstate: 60000005 (nZCv daif -PAN -UAO BTYPE=--)
pc : wl12xx_queue_recovery_work.part.0+0x6c/0x74 [wlcore]
lr : wl12xx_queue_recovery_work+0x24/0x30 [wlcore]
sp : ffff8000126c3a60
x29: ffff8000126c3a60 x28: 00000000000025de
x27: 0000000000000010 x26: 0000000000000005
x25: ffff0001a5d49e80 x24: ffff8000092cf580
x23: ffff0001b7c12623 x22: ffff0001b6fcf2e8
x21: ffff0001b7e46200 x20: 00000000fffffffb
x19: ffff0001a78e6400 x18: 0000000000000030
x17: 0000000000000001 x16: 0000000000000001
x15: ffff0001b7e46670 x14: ffffffffffffffff
x13: ffff8000926c37d7 x12: ffff8000126c37e0
x11: ffff800011e01000 x10: ffff8000120526d0
x9 : 0000000000000000 x8 : 3431206572756c69
x7 : 6166206574756365 x6 : 0000000000000c2c
x5 : 0000000000000000 x4 : ffff0001bf1361e8
x3 : ffff0001bf1790b0 x2 : 0000000000000000
x1 : ffff0001a5d49e80 x0 : 0000000000000001
Call trace:
wl12xx_queue_recovery_work.part.0+0x6c/0x74 [wlcore]
wl12xx_queue_recovery_work+0x24/0x30 [wlcore]
wl1271_cmd_set_sta_key+0x258/0x25c [wlcore]
wl1271_set_key+0x7c/0x2dc [wlcore]
wlcore_set_key+0xe4/0x360 [wlcore]
wl18xx_set_key+0x48/0x1d0 [wl18xx]
wlcore_op_set_key+0xa4/0x180 [wlcore]
ieee80211_key_enable_hw_accel+0xb0/0x2d0 [mac80211]
ieee80211_reenable_keys+0x70/0x110 [mac80211]
ieee80211_reconfig+0xa00/0xca0 [mac80211]
ieee80211_restart_work+0xc4/0xfc [mac80211]
process_one_work+0x1cc/0x350
worker_thread+0x13c/0x470
kthread+0x154/0x160
ret_from_fork+0x10/0x30
---[ end trace b1f722abf9af5919 ]---
wlcore: WARNING could not set keys
wlcore: ERROR Could not add or replace key
wlan0: failed to set key (4, ff:ff:ff:ff:ff:ff) to hardware (-5)
wlcore: Hardware recovery in progress. FW ver: Rev 8.9.0.0.79
wlcore: pc: 0x0, hint_sts: 0x00000040 count: 39
wlcore: down
wlcore: down
ieee80211 phy0: Hardware restart was requested
mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
mmc_host mmc0: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0)
wlcore: PHY firmware version: Rev 8.2.0.0.242
wlcore: firmware booted (Rev 8.9.0.0.79)
wlcore: ERROR command execute failure 14
------------[ cut here ]------------
Tested on Hikey 970.
This reverts commit 2b7aadd3b9e17e8b81eeb8d9cc46756ae4658265.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
drivers/net/wireless/ti/wlcore/cmd.h | 1 -
drivers/net/wireless/ti/wlcore/main.c | 4 ----
2 files changed, 5 deletions(-)
diff --git a/drivers/net/wireless/ti/wlcore/cmd.h b/drivers/net/wireless/ti/wlcore/cmd.h
index 9acd8a41ea61..f2609d5b6bf7 100644
--- a/drivers/net/wireless/ti/wlcore/cmd.h
+++ b/drivers/net/wireless/ti/wlcore/cmd.h
@@ -458,7 +458,6 @@ enum wl1271_cmd_key_type {
KEY_TKIP = 2,
KEY_AES = 3,
KEY_GEM = 4,
- KEY_IGTK = 5,
};
struct wl1271_cmd_set_keys {
diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c
index de6c8a7589ca..ef169de99224 100644
--- a/drivers/net/wireless/ti/wlcore/main.c
+++ b/drivers/net/wireless/ti/wlcore/main.c
@@ -3550,9 +3550,6 @@ int wlcore_set_key(struct wl1271 *wl, enum set_key_cmd cmd,
case WL1271_CIPHER_SUITE_GEM:
key_type = KEY_GEM;
break;
- case WLAN_CIPHER_SUITE_AES_CMAC:
- key_type = KEY_IGTK;
- break;
default:
wl1271_error("Unknown key algo 0x%x", key_conf->cipher);
@@ -6222,7 +6219,6 @@ static int wl1271_init_ieee80211(struct wl1271 *wl)
WLAN_CIPHER_SUITE_TKIP,
WLAN_CIPHER_SUITE_CCMP,
WL1271_CIPHER_SUITE_GEM,
- WLAN_CIPHER_SUITE_AES_CMAC,
};
/* The tx descriptor buffer */
--
2.26.2
next reply other threads:[~2020-08-26 5:49 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-26 5:49 Mauro Carvalho Chehab [this message]
2020-08-27 8:05 ` [PATCH] Revert "wlcore: Adding suppoprt for IGTK key in wlcore driver" Kalle Valo
2020-08-27 15:48 ` Steve deRosier
2020-08-27 17:42 ` Mauro Carvalho Chehab
2020-08-27 20:36 ` Steve deRosier
2020-08-28 7:44 ` Mauro Carvalho Chehab
2020-08-28 8:31 ` Mauro Carvalho Chehab
2020-08-28 7:41 ` Kalle Valo
2020-09-01 9:31 ` Kalle Valo
[not found] ` <20200901093129.8A0FAC433B1@smtp.codeaurora.org>
2020-09-01 10:59 ` [EXTERNAL] " Bouganim, Raz
2020-09-01 11:45 ` Kalle Valo
2020-09-07 6:37 ` [PATCH v2] net: wireless: wlcore: fix support for IGTK key Mauro Carvalho Chehab
2020-09-07 7:31 ` [EXTERNAL] " Bouganim, Raz
2020-09-07 8:38 ` [PATCH] Revert "wlcore: Adding suppoprt for IGTK key in wlcore driver" Kalle Valo
2020-09-07 8:40 ` Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f0a2cb7ea606f1a284d4c23cbf983da2954ce9b6.1598420968.git.mchehab+huawei@kernel.org \
--to=mchehab+huawei@kernel.org \
--cc=davem@davemloft.net \
--cc=dinghao.liu@zju.edu.cn \
--cc=gustavo@embeddedor.com \
--cc=huangfq.daxian@gmail.com \
--cc=johannes.berg@intel.com \
--cc=john.stultz@linaro.org \
--cc=kuba@kernel.org \
--cc=kvalo@codeaurora.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=linuxarm@huawei.com \
--cc=maitalm@ti.com \
--cc=mani@kernel.org \
--cc=mauro.chehab@huawei.com \
--cc=netdev@vger.kernel.org \
--cc=r-bouganim@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).