linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Patrice CHOTARD <patrice.chotard@foss.st.com>
To: <dillon.minfei@gmail.com>, <pierre-yves.mordret@foss.st.com>,
	<alain.volmat@foss.st.com>, <mcoquelin.stm32@gmail.com>,
	<alexandre.torgue@foss.st.com>, <sumit.semwal@linaro.org>,
	<christian.koenig@amd.com>, <mturquette@baylibre.com>
Cc: <sboyd@kernel.org>, <linux-i2c@vger.kernel.org>,
	<linux-stm32@st-md-mailman.stormreply.com>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>, <linux-media@vger.kernel.org>,
	<dri-devel@lists.freedesktop.org>,
	<linaro-mm-sig@lists.linaro.org>, <linux-clk@vger.kernel.org>
Subject: Re: [PATCH 2/4] i2c: stm32f4: Fix stmpe811 get xyz data timeout issue
Date: Tue, 1 Jun 2021 13:43:00 +0200	[thread overview]
Message-ID: <f30d5a1d-5acc-e756-5883-6c3d0173d643@foss.st.com> (raw)
In-Reply-To: <1620990152-19255-3-git-send-email-dillon.minfei@gmail.com>

Hi Dillon

On 5/14/21 1:02 PM, dillon.minfei@gmail.com wrote:
> From: Dillon Min <dillon.minfei@gmail.com>
> 
> As stm32f429's internal flash is 2Mbytes and compiled kernel
> image bigger than 2Mbytes, so we have to load kernel image
> to sdram on stm32f429-disco board which has 8Mbytes sdram space.
> 
> based on above context, as you knows kernel running on external
> sdram is more slower than internal flash. besides, we need read 4
> bytes to get touch screen xyz(x, y, pressure) coordinate data in
> stmpe811 interrupt.
> 
> so, in stm32f4_i2c_handle_rx_done, as i2c read slower than running
> in xip mode, have to adjust 'STOP/START bit set position' from last
> two bytes to last one bytes. else, will get i2c timeout in reading
> touch screen coordinate.
> 
> to not bring in side effect, introduce IIC_LAST_BYTE_POS to support xip
> kernel or zImage.
> 
> Fixes: 62817fc8d282 ("i2c: stm32f4: add driver")
> Link: https://lore.kernel.org/lkml/1591709203-12106-5-git-send-email-dillon.minfei@gmail.com/
> Signed-off-by: Dillon Min <dillon.minfei@gmail.com>
> ---
>  drivers/i2c/busses/i2c-stm32f4.c | 12 +++++++++---
>  1 file changed, 9 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-stm32f4.c b/drivers/i2c/busses/i2c-stm32f4.c
> index 4933fc8ce3fd..2e41231b9037 100644
> --- a/drivers/i2c/busses/i2c-stm32f4.c
> +++ b/drivers/i2c/busses/i2c-stm32f4.c
> @@ -93,6 +93,12 @@
>  #define STM32F4_I2C_MAX_FREQ		46U
>  #define HZ_TO_MHZ			1000000
>  
> +#if !defined(CONFIG_MMU) && !defined(CONFIG_XIP_KERNEL)
> +#define IIC_LAST_BYTE_POS 1
> +#else
> +#define IIC_LAST_BYTE_POS 2
> +#endif
> +
>  /**
>   * struct stm32f4_i2c_msg - client specific data
>   * @addr: 8-bit slave addr, including r/w bit
> @@ -439,7 +445,7 @@ static void stm32f4_i2c_handle_rx_done(struct stm32f4_i2c_dev *i2c_dev)
>  	int i;
>  
>  	switch (msg->count) {
> -	case 2:
> +	case IIC_LAST_BYTE_POS:
>  		/*
>  		 * In order to correctly send the Stop or Repeated Start
>  		 * condition on the I2C bus, the STOP/START bit has to be set
> @@ -454,7 +460,7 @@ static void stm32f4_i2c_handle_rx_done(struct stm32f4_i2c_dev *i2c_dev)
>  		else
>  			stm32f4_i2c_set_bits(reg, STM32F4_I2C_CR1_START);
>  
> -		for (i = 2; i > 0; i--)
> +		for (i = IIC_LAST_BYTE_POS; i > 0; i--)
>  			stm32f4_i2c_read_msg(i2c_dev);
>  
>  		reg = i2c_dev->base + STM32F4_I2C_CR2;
> @@ -463,7 +469,7 @@ static void stm32f4_i2c_handle_rx_done(struct stm32f4_i2c_dev *i2c_dev)
>  
>  		complete(&i2c_dev->complete);
>  		break;
> -	case 3:
> +	case (IIC_LAST_BYTE_POS+1):
>  		/*
>  		 * In order to correctly generate the NACK pulse after the last
>  		 * received data byte, we have to enable NACK before reading N-2
> 

I tested this patch on STM32F429-Disco, it fixes the issue described by Dillon.
But i think it's not a good idea to make usage of #if !defined(CONFIG_MMU) && !defined(CONFIG_XIP_KERNEL)
inside the driver code.

Pierre-Yves, Alain, as i am not I2C expert, can you have a look at this patch and propose another solution 
to fix the original issue described by Dillon ?

Thanks
Patrice

  reply	other threads:[~2021-06-01 11:43 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-14 11:02 [PATCH 0/4] Fix the i2c/clk bug of stm32 mcu platform dillon.minfei
2021-05-14 11:02 ` [PATCH 1/4] drm/panel: Add ilitek ili9341 panel driver dillon.minfei
2021-05-31 13:15   ` Patrice CHOTARD
2021-05-31 13:39     ` Dillon Min
2021-06-01  2:31       ` Dillon Min
2021-05-14 11:02 ` [PATCH 2/4] i2c: stm32f4: Fix stmpe811 get xyz data timeout issue dillon.minfei
2021-06-01 11:43   ` Patrice CHOTARD [this message]
2021-06-01 11:58     ` Dillon Min
2021-05-14 11:02 ` [PATCH 3/4] clk: stm32: Fix stm32f429's ltdc driver hang in set clock rate dillon.minfei
2021-06-01 12:48   ` Patrice CHOTARD
2021-05-14 11:02 ` [PATCH 4/4] clk: stm32: Fix ltdc's clock turn off by clk_disable_unused() after kernel startup dillon.minfei
2021-06-01 12:51   ` Patrice CHOTARD
2021-05-28  6:01 ` [PATCH 0/4] Fix the i2c/clk bug of stm32 mcu platform Dillon Min
2021-05-31 13:20 ` Patrice CHOTARD
2021-05-31 13:38   ` Dillon Min
2021-05-31 13:50     ` Patrice CHOTARD
2021-05-31 14:29       ` Dillon Min
2021-05-31 14:58         ` Patrice CHOTARD
2021-06-01  3:28           ` Dillon Min
2021-06-01  8:00             ` Patrice CHOTARD

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=f30d5a1d-5acc-e756-5883-6c3d0173d643@foss.st.com \
    --to=patrice.chotard@foss.st.com \
    --cc=alain.volmat@foss.st.com \
    --cc=alexandre.torgue@foss.st.com \
    --cc=christian.koenig@amd.com \
    --cc=dillon.minfei@gmail.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=linaro-mm-sig@lists.linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=mturquette@baylibre.com \
    --cc=pierre-yves.mordret@foss.st.com \
    --cc=sboyd@kernel.org \
    --cc=sumit.semwal@linaro.org \
    --subject='Re: [PATCH 2/4] i2c: stm32f4: Fix stmpe811 get xyz data timeout issue' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).