Re: [PATCH] EDAC: aspeed: print resource_size_t using %pa

["Andrew Jeffery" <andrew@aj.id.au>]

On Tue, 4 May 2021, at 14:37, Randy Dunlap wrote:
> On 5/3/21 9:57 PM, Andrew Jeffery wrote:
> > 
> > 
> > On Tue, 4 May 2021, at 02:04, Randy Dunlap wrote:
> >> Fix build warnings for using "%x" to print resource_size_t in 2 places.
> >> resource_size_t can be either of u32 or u64. We have a special format
> >> "%pa" for printing a resource_size_t, which is the same as a phys_addr_t.
> >> See Documentation/core-api/printk-formats.rst.
> >>
> >>   CC      drivers/edac/aspeed_edac.o
> >> ../drivers/edac/aspeed_edac.c: In function 'init_csrows':
> >> ../drivers/edac/aspeed_edac.c:257:21: warning: format '%x' expects 
> >> argument of type 'unsigned int', but argument 4 has type 
> >> 'resource_size_t' {aka 'long long unsigned int'} [-Wformat=]
> >>   257 |  dev_dbg(mci->pdev, "dt: /memory node resources: first page 
> >> r.start=0x%x, resource_size=0x%x, PAGE_SHIFT macro=0x%x\n",
> >>   257 |  dev_dbg(mci->pdev, "dt: /memory node resources: first page 
> >> r.start=0x%x, resource_size=0x%x, PAGE_SHIFT macro=0x%x\n",
> >>   257 |  dev_dbg(mci->pdev, "dt: /memory node resources: first page 
> >> r.start=0x%x, resource_size=0x%x, PAGE_SHIFT macro=0x%x\n",
> >> ../drivers/edac/aspeed_edac.c:257:21: warning: format '%x' expects 
> >> argument of type 'unsigned int', but argument 5 has type 
> >> 'resource_size_t' {aka 'long long unsigned int'} [-Wformat=]
> >>   257 |  dev_dbg(mci->pdev, "dt: /memory node resources: first page 
> >> r.start=0x%x, resource_size=0x%x, PAGE_SHIFT macro=0x%x\n",
> >>   257 |  dev_dbg(mci->pdev, "dt: /memory node resources: first page 
> >> r.start=0x%x, resource_size=0x%x, PAGE_SHIFT macro=0x%x\n",
> >>   257 |  dev_dbg(mci->pdev, "dt: /memory node resources: first page 
> >> r.start=0x%x, resource_size=0x%x, PAGE_SHIFT macro=0x%x\n",
> >>
> >> Fixes: 9b7e6242ee4e ("EDAC, aspeed: Add an Aspeed AST2500 EDAC driver")
> >> Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
> >> Reported-by: kernel test robot <lkp@intel.com>
> >> Cc: Troy Lee <troy_lee@aspeedtech.com>
> >> Cc: Stefan Schaeckeler <sschaeck@cisco.com>
> >> Cc: linux-edac@vger.kernel.org
> >> Cc: Borislav Petkov <bp@alien8.de>
> >> Cc: Borislav Petkov <bp@suse.de>
> >> Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
> >> Cc: Tony Luck <tony.luck@intel.com>
> >> Cc: linux-aspeed@lists.ozlabs.org
> >> ---
> >> Found in linux-next but applies to mainline.
> > 
> >>
> >>  drivers/edac/aspeed_edac.c |    8 +++++---
> >>  1 file changed, 5 insertions(+), 3 deletions(-)
> >>
> >> --- linux-next-20210503.orig/drivers/edac/aspeed_edac.c
> >> +++ linux-next-20210503/drivers/edac/aspeed_edac.c
> >> @@ -234,6 +234,7 @@ static int init_csrows(struct mem_ctl_in
> >>  	u32 nr_pages, dram_type;
> >>  	struct dimm_info *dimm;
> >>  	struct device_node *np;
> >> +	resource_size_t rsize;
> >>  	struct resource r;
> >>  	u32 reg04;
> >>  	int rc;
> >> @@ -254,11 +255,12 @@ static int init_csrows(struct mem_ctl_in
> >>  		return rc;
> >>  	}
> >>  
> >> -	dev_dbg(mci->pdev, "dt: /memory node resources: first page 
> >> r.start=0x%x, resource_size=0x%x, PAGE_SHIFT macro=0x%x\n",
> >> -		r.start, resource_size(&r), PAGE_SHIFT);
> >> +	rsize = resource_size(&r);
> >> +	dev_dbg(mci->pdev, "dt: /memory node resources: first page 
> >> r.start=0x%pa, resource_size=0x%pa, PAGE_SHIFT macro=0x%x\n",
> >> +		&r.start, &rsize, PAGE_SHIFT);
> > 
> > Arnd posted a fix a few days back that feels more intuitive, though 
> > probably could have cleaned up the grammar:
> > 
> > https://lore.kernel.org/lkml/20210421135500.3518661-1-arnd@kernel.org/
> 
> Oh, that's fine. I just missed it. :(

No worries, I was a bit short there as I was in a rush. I certainly 
don't expect you to go looking for Arnd's patch without knowing it 
exists :)

Andrew