From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752024AbdA1Ovu (ORCPT ); Sat, 28 Jan 2017 09:51:50 -0500 Received: from saturn.retrosnub.co.uk ([178.18.118.26]:45953 "EHLO saturn.retrosnub.co.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751518AbdA1OvH (ORCPT ); Sat, 28 Jan 2017 09:51:07 -0500 Subject: Re: [PATCH v2 04/25] iio: adc: add support for X-Powers AXP20X and AXP22X PMICs ADCs To: Quentin Schulz , knaack.h@gmx.de, lars@metafoo.de, pmeerw@pmeerw.net, robh+dt@kernel.org, mark.rutland@arm.com, wens@csie.org, sre@kernel.org, linux@armlinux.org.uk, maxime.ripard@free-electrons.com, lee.jones@linaro.org References: <20170127085458.18270-1-quentin.schulz@free-electrons.com> <20170127085458.18270-5-quentin.schulz@free-electrons.com> Cc: linux-iio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org, thomas.petazzoni@free-electrons.com, icenowy@aosc.xyz, bonbons@linux-vserver.org From: Jonathan Cameron Message-ID: Date: Sat, 28 Jan 2017 14:49:39 +0000 User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:45.0) Gecko/20100101 Thunderbird/45.6.0 MIME-Version: 1.0 In-Reply-To: <20170127085458.18270-5-quentin.schulz@free-electrons.com> Content-Type: text/plain; charset=windows-1252 Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On 27/01/17 08:54, Quentin Schulz wrote: > The X-Powers AXP20X and AXP22X PMICs have multiple ADCs. They expose the > battery voltage, battery charge and discharge currents, AC-in and VBUS > voltages and currents, 2 GPIOs muxable in ADC mode and PMIC temperature. > > This adds support for most of AXP20X and AXP22X ADCs. > > Signed-off-by: Quentin Schulz Pretty good, but not everything seems to be cleaned up on error paths in probe. A few other suggestions / questions inline. Jonathan > --- > > v2: > - removed unused defines, > - changed BIT(x) to 1 << x when describing bits purpose for which 2 << > x or 3 << x exists, to be consistent, > - changed ADC rate defines to macro formulas, > - reordered IIO channels, now different measures (current/voltage) of > the same part of the PMIC (e.g. battery), have the same IIO channel in > their respective IIO type. When a part of the PMIC have only one > measure, a number is jumped, > - left IIO channel mapping in DT to use iio_map structure, > - removed indexing of ADC internal temperature, > - removed unused iio_dev structure in axp20x_adc_iio, > - added a structure for data specific to AXP20X or AXP22X PMICs instead > of using an ID and an if condition when needing to separate the > behaviour of both, > - added a comment on batt_chrg_i really being on 12bits rather than > what the Chinese datasheets say (13 bits), > - corrected the offset for AXP22X PMIC temperature, > - set the ADC rate to a value (100Hz) shared by the AXP20X and AXP22X, > - created macro formulas to compute the ADC rate for each, > - added a condition on presence of ADC_EN2 reg before setting/resetting > it, > - switched from devm_iio_device_unregister to the non-devm function > because of the need for a remove function, > - removed some dead code, > > drivers/iio/adc/Kconfig | 10 + > drivers/iio/adc/Makefile | 1 + > drivers/iio/adc/axp20x_adc.c | 572 +++++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 583 insertions(+) > create mode 100644 drivers/iio/adc/axp20x_adc.c > > diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig > index 9c8b558..ed17fe1 100644 > --- a/drivers/iio/adc/Kconfig > +++ b/drivers/iio/adc/Kconfig > @@ -154,6 +154,16 @@ config AT91_SAMA5D2_ADC > To compile this driver as a module, choose M here: the module will be > called at91-sama5d2_adc. > > +config AXP20X_ADC > + tristate "X-Powers AXP20X and AXP22X ADC driver" > + depends on MFD_AXP20X > + help > + Say yes here to have support for X-Powers power management IC (PMIC) > + AXP20X and AXP22X ADC devices. > + > + To compile this driver as a module, choose M here: the module will be > + called axp20x_adc. > + > config AXP288_ADC > tristate "X-Powers AXP288 ADC driver" > depends on MFD_AXP20X > diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile > index d36c4be..f5c28a5 100644 > --- a/drivers/iio/adc/Makefile > +++ b/drivers/iio/adc/Makefile > @@ -16,6 +16,7 @@ obj-$(CONFIG_AD7887) += ad7887.o > obj-$(CONFIG_AD799X) += ad799x.o > obj-$(CONFIG_AT91_ADC) += at91_adc.o > obj-$(CONFIG_AT91_SAMA5D2_ADC) += at91-sama5d2_adc.o > +obj-$(CONFIG_AXP20X_ADC) += axp20x_adc.o > obj-$(CONFIG_AXP288_ADC) += axp288_adc.o > obj-$(CONFIG_BCM_IPROC_ADC) += bcm_iproc_adc.o > obj-$(CONFIG_BERLIN2_ADC) += berlin2-adc.o > diff --git a/drivers/iio/adc/axp20x_adc.c b/drivers/iio/adc/axp20x_adc.c > new file mode 100644 > index 0000000..bacde92 > --- /dev/null > +++ b/drivers/iio/adc/axp20x_adc.c > @@ -0,0 +1,572 @@ > +/* ADC driver for AXP20X and AXP22X PMICs > + * > + * Copyright (c) 2016 Free Electrons NextThing Co. > + * Quentin Schulz > + * > + * This program is free software; you can redistribute it and/or modify it under > + * the terms of the GNU General Public License version 2 as published by the > + * Free Software Foundation. > + */ > + > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +#include > +#include > +#include > +#include > + > +#define AXP20X_ADC_EN1_MASK GENMASK(7, 0) > + > +#define AXP20X_ADC_EN2_MASK (GENMASK(3, 2) | BIT(7)) > +#define AXP22X_ADC_EN1_MASK (GENMASK(7, 5) | BIT(0)) > + > +#define AXP20X_GPIO10_IN_RANGE_GPIO0 BIT(0) > +#define AXP20X_GPIO10_IN_RANGE_GPIO1 BIT(1) > +#define AXP20X_GPIO10_IN_RANGE_GPIO0_VAL(x) ((x) & BIT(0)) > +#define AXP20X_GPIO10_IN_RANGE_GPIO1_VAL(x) (((x) & BIT(0)) << 1) > + > +#define AXP20X_ADC_RATE_MASK GENMASK(7, 6) > +#define AXP20X_ADC_RATE_HZ(x) ((ilog2((x) / 25) << 6) & AXP20X_ADC_RATE_MASK) > +#define AXP22X_ADC_RATE_HZ(x) ((ilog2((x) / 100) << 6) & AXP20X_ADC_RATE_MASK) > + > +#define AXP20X_ADC_CHANNEL(_channel, _name, _type, _reg) \ > + { \ > + .type = _type, \ > + .indexed = 1, \ > + .channel = _channel, \ > + .address = _reg, \ > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ > + BIT(IIO_CHAN_INFO_SCALE), \ > + .datasheet_name = _name, \ > + } > + > +#define AXP20X_ADC_CHANNEL_OFFSET(_channel, _name, _type, _reg) \ > + { \ > + .type = _type, \ > + .indexed = 1, \ > + .channel = _channel, \ > + .address = _reg, \ > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ > + BIT(IIO_CHAN_INFO_SCALE) |\ > + BIT(IIO_CHAN_INFO_OFFSET),\ > + .datasheet_name = _name, \ > + } > + > +struct axp_data; > + > +struct axp20x_adc_iio { > + struct regmap *regmap; > + struct axp_data *data; > +}; > + > +enum axp20x_adc_channel_v { > + AXP20X_ACIN_V = 0, > + AXP20X_VBUS_V, > + AXP20X_TS_IN, > + AXP20X_GPIO0_V, > + AXP20X_GPIO1_V, > + AXP20X_IPSOUT_V, > + AXP20X_BATT_V, > +}; > + > +enum axp20x_adc_channel_i { > + AXP20X_ACIN_I = 0, > + AXP20X_VBUS_I, > + AXP20X_BATT_CHRG_I, > + AXP20X_BATT_DISCHRG_I, > +}; > + > +enum axp22x_adc_channel_v { > + AXP22X_TS_IN = 0, > + AXP22X_BATT_V, > +}; > + > +enum axp22x_adc_channel_i { > + AXP22X_BATT_CHRG_I = 1, > + AXP22X_BATT_DISCHRG_I, > +}; > + > +static struct iio_map axp20x_maps[] = { > + { > + .consumer_dev_name = "axp20x-usb-power-supply", > + .consumer_channel = "vbus_v", > + .adc_channel_label = "vbus_v", > + }, { > + .consumer_dev_name = "axp20x-usb-power-supply", > + .consumer_channel = "vbus_i", > + .adc_channel_label = "vbus_i", > + }, { /* sentinel */ } > +}; > + > +/* > + * Channels are mapped by physical system. Their channels share the same index. > + * i.e. acin_i is in_current0_raw and acin_v is in_voltage0_raw. > + * The only exception is for the battery. batt_v will be in_voltage6_raw and > + * charge current in_current6_raw and discharge current will be in_current7_raw. > + */ > +static const struct iio_chan_spec axp20x_adc_channels[] = { > + AXP20X_ADC_CHANNEL(AXP20X_ACIN_V, "acin_v", IIO_VOLTAGE, > + AXP20X_ACIN_V_ADC_H), > + AXP20X_ADC_CHANNEL(AXP20X_ACIN_I, "acin_i", IIO_CURRENT, > + AXP20X_ACIN_I_ADC_H), > + AXP20X_ADC_CHANNEL(AXP20X_VBUS_V, "vbus_v", IIO_VOLTAGE, > + AXP20X_VBUS_V_ADC_H), > + AXP20X_ADC_CHANNEL(AXP20X_VBUS_I, "vbus_i", IIO_CURRENT, > + AXP20X_VBUS_I_ADC_H), > + { > + .type = IIO_TEMP, > + .address = AXP20X_TEMP_ADC_H, > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | > + BIT(IIO_CHAN_INFO_SCALE) | > + BIT(IIO_CHAN_INFO_OFFSET), > + .datasheet_name = "pmic_temp", > + }, > + AXP20X_ADC_CHANNEL_OFFSET(AXP20X_GPIO0_V, "gpio0_v", IIO_VOLTAGE, > + AXP20X_GPIO0_V_ADC_H), > + AXP20X_ADC_CHANNEL_OFFSET(AXP20X_GPIO1_V, "gpio1_v", IIO_VOLTAGE, > + AXP20X_GPIO1_V_ADC_H), > + AXP20X_ADC_CHANNEL(AXP20X_IPSOUT_V, "ipsout_v", IIO_VOLTAGE, > + AXP20X_IPSOUT_V_HIGH_H), > + AXP20X_ADC_CHANNEL(AXP20X_BATT_V, "batt_v", IIO_VOLTAGE, > + AXP20X_BATT_V_H), > + AXP20X_ADC_CHANNEL(AXP20X_BATT_CHRG_I, "batt_chrg_i", IIO_CURRENT, > + AXP20X_BATT_CHRG_I_H), > + AXP20X_ADC_CHANNEL(AXP20X_BATT_DISCHRG_I, "batt_dischrg_i", IIO_CURRENT, > + AXP20X_BATT_DISCHRG_I_H), > +}; > + > +static const struct iio_chan_spec axp22x_adc_channels[] = { > + { > + .type = IIO_TEMP, > + .address = AXP22X_PMIC_TEMP_H, > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | > + BIT(IIO_CHAN_INFO_SCALE) | > + BIT(IIO_CHAN_INFO_OFFSET), > + .datasheet_name = "pmic_temp", > + }, > + AXP20X_ADC_CHANNEL(AXP22X_BATT_V, "batt_v", IIO_VOLTAGE, > + AXP20X_BATT_V_H), > + AXP20X_ADC_CHANNEL(AXP22X_BATT_CHRG_I, "batt_chrg_i", IIO_CURRENT, > + AXP20X_BATT_CHRG_I_H), > + AXP20X_ADC_CHANNEL(AXP22X_BATT_DISCHRG_I, "batt_dischrg_i", IIO_CURRENT, > + AXP20X_BATT_DISCHRG_I_H), > +}; > + > +static int axp20x_adc_raw(struct iio_dev *indio_dev, > + struct iio_chan_spec const *chan, int *val) > +{ > + struct axp20x_adc_iio *info = iio_priv(indio_dev); > + int size = 12; > + > + switch (chan->type) { > + case IIO_CURRENT: > + /* > + * Unlike the Chinese datasheets tell, the charging current is > + * stored on 12 bits, not 13 bits. > + */ > + if (chan->channel == AXP20X_BATT_DISCHRG_I) > + size = 13; Given I don't think you can get here without it being current, voltage or temp; couldn't this be done more cleanly with if ((chan->type == IIO_CURRENT) && (chan->channel == AXP20X_BAT_DISCHRG_I)) size = 13; and have the rest in the normal code flow? > + case IIO_VOLTAGE: > + case IIO_TEMP: > + *val = axp20x_read_variable_width(info->regmap, chan->address, > + size); > + if (*val < 0) > + return *val; > + > + return IIO_VAL_INT; > + > + default: > + return -EINVAL; > + } > +} > + > +static int axp22x_adc_raw(struct iio_dev *indio_dev, > + struct iio_chan_spec const *chan, int *val) > +{ > + struct axp20x_adc_iio *info = iio_priv(indio_dev); > + int size = 12; > + > + switch (chan->type) { > + case IIO_CURRENT: > + /* > + * Unlike the Chinese datasheets tell, the charging current is > + * stored on 12 bits, not 13 bits. > + */ > + if (chan->channel == AXP22X_BATT_DISCHRG_I) > + size = 13; > + case IIO_VOLTAGE: > + case IIO_TEMP: > + *val = axp20x_read_variable_width(info->regmap, chan->address, > + size); > + if (*val < 0) > + return *val; > + > + return IIO_VAL_INT; > + > + default: > + return -EINVAL; > + } > +} > + > +static int axp20x_adc_scale_voltage(int channel, int *val, int *val2) > +{ > + switch (channel) { > + case AXP20X_ACIN_V: > + case AXP20X_VBUS_V: > + *val = 1; > + *val2 = 700000; > + return IIO_VAL_INT_PLUS_MICRO; > + > + case AXP20X_GPIO0_V: > + case AXP20X_GPIO1_V: > + *val = 0; > + *val2 = 500000; > + return IIO_VAL_INT_PLUS_MICRO; > + > + case AXP20X_BATT_V: > + *val = 1; > + *val2 = 100000; > + return IIO_VAL_INT_PLUS_MICRO; > + > + case AXP20X_IPSOUT_V: > + *val = 1; > + *val2 = 400000; > + return IIO_VAL_INT_PLUS_MICRO; > + > + default: > + return -EINVAL; > + } > +} > + > +static int axp20x_adc_scale_current(int channel, int *val, int *val2) > +{ > + switch (channel) { > + case AXP20X_ACIN_I: > + *val = 0; > + *val2 = 625000; > + return IIO_VAL_INT_PLUS_MICRO; > + > + case AXP20X_VBUS_I: > + *val = 0; > + *val2 = 375000; > + return IIO_VAL_INT_PLUS_MICRO; > + > + case AXP20X_BATT_DISCHRG_I: > + case AXP20X_BATT_CHRG_I: > + *val = 0; > + *val2 = 500000; > + return IIO_VAL_INT_PLUS_MICRO; > + > + default: > + return -EINVAL; > + } > +} > + > +static int axp20x_adc_scale(struct iio_chan_spec const *chan, int *val, > + int *val2) > +{ > + switch (chan->type) { > + case IIO_VOLTAGE: > + return axp20x_adc_scale_voltage(chan->channel, val, val2); > + > + case IIO_CURRENT: > + return axp20x_adc_scale_current(chan->channel, val, val2); > + > + case IIO_TEMP: > + *val = 100; > + return IIO_VAL_INT; > + > + default: > + return -EINVAL; > + } > +} > + > +static int axp22x_adc_scale(struct iio_chan_spec const *chan, int *val, > + int *val2) > +{ > + switch (chan->type) { > + case IIO_VOLTAGE: > + if (chan->channel != AXP22X_BATT_V) > + return -EINVAL; > + > + *val = 1; > + *val2 = 100000; > + return IIO_VAL_INT_PLUS_MICRO; A fixed scale of 1.1x? (just checking) > + > + case IIO_CURRENT: > + *val = 0; > + *val2 = 500000; > + return IIO_VAL_INT_PLUS_MICRO; > + > + case IIO_TEMP: > + *val = 100; > + return IIO_VAL_INT; > + > + default: > + return -EINVAL; > + } > +} > + > +static int axp20x_adc_offset_voltage(struct iio_dev *indio_dev, int channel, > + int *val) > +{ > + struct axp20x_adc_iio *info = iio_priv(indio_dev); > + int ret, reg; > + > + if (channel != AXP20X_GPIO0_V && channel != AXP20X_GPIO1_V) > + return -EINVAL; > + > + ret = regmap_read(info->regmap, AXP20X_GPIO10_IN_RANGE, ®); > + if (ret < 0) > + return ret; > + > + if (channel == AXP20X_GPIO0_V) > + *val = reg & AXP20X_GPIO10_IN_RANGE_GPIO0; > + else > + *val = reg & AXP20X_GPIO10_IN_RANGE_GPIO1; > + > + *val = !!(*val) * 700000; > + > + return IIO_VAL_INT; > +} > + > +static int axp20x_adc_offset(struct iio_dev *indio_dev, > + struct iio_chan_spec const *chan, int *val) > +{ > + switch (chan->type) { > + case IIO_VOLTAGE: > + return axp20x_adc_offset_voltage(indio_dev, chan->channel, val); > + > + case IIO_TEMP: > + *val = -1447; > + return IIO_VAL_INT; > + > + default: > + return -EINVAL; > + } > +} > + > +static int axp20x_read_raw(struct iio_dev *indio_dev, > + struct iio_chan_spec const *chan, int *val, > + int *val2, long mask) > +{ > + switch (mask) { > + case IIO_CHAN_INFO_OFFSET: > + return axp20x_adc_offset(indio_dev, chan, val); > + > + case IIO_CHAN_INFO_SCALE: > + return axp20x_adc_scale(chan, val, val2); > + > + case IIO_CHAN_INFO_RAW: > + return axp20x_adc_raw(indio_dev, chan, val); > + > + default: > + return -EINVAL; > + } > +} > + > +static int axp22x_read_raw(struct iio_dev *indio_dev, > + struct iio_chan_spec const *chan, int *val, > + int *val2, long mask) > +{ > + switch (mask) { > + case IIO_CHAN_INFO_OFFSET: > + *val = -2677; > + return IIO_VAL_INT; > + > + case IIO_CHAN_INFO_SCALE: > + return axp22x_adc_scale(chan, val, val2); > + > + case IIO_CHAN_INFO_RAW: > + return axp22x_adc_raw(indio_dev, chan, val); > + > + default: > + return -EINVAL; > + } > +} > + > +static int axp20x_write_raw(struct iio_dev *indio_dev, > + struct iio_chan_spec const *chan, int val, int val2, > + long mask) > +{ > + struct axp20x_adc_iio *info = iio_priv(indio_dev); > + > + /* > + * The AXP20X PMIC allows the user to choose between 0V and 0.7V offsets > + * for (independently) GPIO0 and GPIO1 when in ADC mode. > + */ > + if (mask != IIO_CHAN_INFO_OFFSET) > + return -EINVAL; > + > + if (chan->channel != AXP20X_GPIO0_V && chan->channel != AXP20X_GPIO1_V) > + return -EINVAL; > + > + if (val != 0 && val != 700000) > + return -EINVAL; > + > + if (chan->channel == AXP20X_GPIO0_V) > + return regmap_update_bits(info->regmap, AXP20X_GPIO10_IN_RANGE, > + AXP20X_GPIO10_IN_RANGE_GPIO0, > + AXP20X_GPIO10_IN_RANGE_GPIO0_VAL(!!val)); > + > + return regmap_update_bits(info->regmap, AXP20X_GPIO10_IN_RANGE, > + AXP20X_GPIO10_IN_RANGE_GPIO1, > + AXP20X_GPIO10_IN_RANGE_GPIO1_VAL(!!val)); > +} > + > +static const struct iio_info axp20x_adc_iio_info = { > + .read_raw = axp20x_read_raw, > + .write_raw = axp20x_write_raw, > + .driver_module = THIS_MODULE, > +}; > + > +static const struct iio_info axp22x_adc_iio_info = { > + .read_raw = axp22x_read_raw, > + .driver_module = THIS_MODULE, > +}; > + > +static int axp20x_adc_rate(int rate) > +{ > + return AXP20X_ADC_RATE_HZ(rate); > +} > + > +static int axp22x_adc_rate(int rate) > +{ > + return AXP22X_ADC_RATE_HZ(rate); > +} > + > +struct axp_data { > + const struct iio_info *iio_info; > + int num_channels; > + struct iio_chan_spec const *channels; > + unsigned long adc_en1_mask; > + int (*adc_rate)(int rate); > + bool adc_en2; > + struct iio_map *maps; > +}; > + > +static const struct axp_data axp20x_data = { > + .iio_info = &axp20x_adc_iio_info, > + .num_channels = ARRAY_SIZE(axp20x_adc_channels), > + .channels = axp20x_adc_channels, > + .adc_en1_mask = AXP20X_ADC_EN1_MASK, > + .adc_rate = axp20x_adc_rate, > + .adc_en2 = true, > + .maps = axp20x_maps, > +}; > + > +static const struct axp_data axp22x_data = { > + .iio_info = &axp22x_adc_iio_info, > + .num_channels = ARRAY_SIZE(axp22x_adc_channels), > + .channels = axp22x_adc_channels, > + .adc_en1_mask = AXP22X_ADC_EN1_MASK, > + .adc_rate = axp22x_adc_rate, > + .adc_en2 = false, > +}; > + > +static const struct of_device_id axp20x_adc_of_match[] = { > + { .compatible = "x-powers,axp209-adc", .data = (void *)&axp20x_data, }, > + { .compatible = "x-powers,axp221-adc", .data = (void *)&axp22x_data, }, > + { /* sentinel */ }, > +}; > + > +static int axp20x_probe(struct platform_device *pdev) > +{ > + struct axp20x_adc_iio *info; > + struct iio_dev *indio_dev; > + struct axp20x_dev *axp20x_dev; > + int ret; > + > + axp20x_dev = dev_get_drvdata(pdev->dev.parent); > + > + indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info)); > + if (!indio_dev) > + return -ENOMEM; > + > + info = iio_priv(indio_dev); > + platform_set_drvdata(pdev, indio_dev); > + > + info->regmap = axp20x_dev->regmap; > + indio_dev->name = dev_name(&pdev->dev); Not sure on this name - what does end up as? Expected to be a description of the part so in this case something like axp209-adc. I've been lax at picking up on this in the past and it's led to some crazy naming that is no use at all to userspace. Basically this name just provides a convenient user readable name for userspace apps to use. > + indio_dev->dev.parent = &pdev->dev; > + indio_dev->dev.of_node = pdev->dev.of_node; > + indio_dev->modes = INDIO_DIRECT_MODE; > + > + info->data = (struct axp_data *)of_device_get_match_data(&pdev->dev); > + > + indio_dev->info = info->data->iio_info; > + indio_dev->num_channels = info->data->num_channels; > + indio_dev->channels = info->data->channels; > + > + /* Enable the ADCs on IP */ > + regmap_write(info->regmap, AXP20X_ADC_EN1, info->data->adc_en1_mask); > + > + if (info->data->adc_en2) > + /* Enable GPIO0/1 and internal temperature ADCs */ > + regmap_update_bits(info->regmap, AXP20X_ADC_EN2, > + AXP20X_ADC_EN2_MASK, AXP20X_ADC_EN2_MASK); > + > + /* Configure ADCs rate */ > + regmap_update_bits(info->regmap, AXP20X_ADC_RATE, AXP20X_ADC_RATE_MASK, > + info->data->adc_rate(100)); > + > + ret = iio_map_array_register(indio_dev, info->data->maps); > + if (ret < 0) { > + dev_err(&pdev->dev, "failed to register IIO maps: %d\n", ret); This should be disabling channels. > + return ret; > + } > + > + ret = iio_device_register(indio_dev); > + if (ret < 0) { > + dev_err(&pdev->dev, "could not register the device\n"); > + regmap_write(info->regmap, AXP20X_ADC_EN1, 0); > + > + if (info->data->adc_en2) > + regmap_write(info->regmap, AXP20X_ADC_EN2, 0); I'd expect to see a complete unwind of what has been done earlier in probe including iio_map_array_unregister. The traditional goto error* approach is probably worth having here to make sure the unwind makes sense. > + > + return ret; > + } > + > + return 0; > +} > + > +static int axp20x_remove(struct platform_device *pdev) > +{ > + struct axp20x_adc_iio *info; > + struct iio_dev *indio_dev = platform_get_drvdata(pdev); > + > + info = iio_priv(indio_dev); > + > + iio_device_unregister(indio_dev); iio_map_array_unregister? > + > + regmap_write(info->regmap, AXP20X_ADC_EN1, 0); > + > + if (info->data->adc_en2) > + regmap_write(info->regmap, AXP20X_ADC_EN2, 0); > + > + return 0; > +} > + > +static struct platform_driver axp20x_adc_driver = { > + .driver = { > + .name = "axp20x-adc", > + .of_match_table = axp20x_adc_of_match, > + }, > + .probe = axp20x_probe, > + .remove = axp20x_remove, > +}; > + > +module_platform_driver(axp20x_adc_driver); > + > +MODULE_DESCRIPTION("ADC driver for AXP20X and AXP22X PMICs"); > +MODULE_AUTHOR("Quentin Schulz "); > +MODULE_LICENSE("GPL"); >