From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752266AbdDLCuH (ORCPT ); Tue, 11 Apr 2017 22:50:07 -0400 Received: from fllnx209.ext.ti.com ([198.47.19.16]:64272 "EHLO fllnx209.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751605AbdDLCuF (ORCPT ); Tue, 11 Apr 2017 22:50:05 -0400 Subject: Re: [PATCH] thermal: core: Add a back up thermal shutdown mechanism To: Eduardo Valentin References: <1490941820-13511-1-git-send-email-j-keerthy@ti.com> <20170411172918.GA5193@localhost.localdomain> CC: , , , , , From: Keerthy Message-ID: Date: Wed, 12 Apr 2017 08:19:19 +0530 User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:45.0) Gecko/20100101 Thunderbird/45.7.0 MIME-Version: 1.0 In-Reply-To: <20170411172918.GA5193@localhost.localdomain> Content-Type: text/plain; charset="windows-1252" Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Tuesday 11 April 2017 10:59 PM, Eduardo Valentin wrote: > Hey, > > On Fri, Mar 31, 2017 at 12:00:20PM +0530, Keerthy wrote: >> orderly_poweroff is triggered when a graceful shutdown >> of system is desired. This may be used in many critical states of the >> kernel such as when subsystems detects conditions such as critical >> temperature conditions. However, in certain conditions in system >> boot up sequences like those in the middle of driver probes being >> initiated, userspace will be unable to power off the system in a clean >> manner and leaves the system in a critical state. In cases like these, >> the /sbin/poweroff will return success (having forked off to attempt >> powering off the system. However, the system overall will fail to >> completely poweroff (since other modules will be probed) and the system >> is still functional with no userspace (since that would have shut itself >> off). > > OK... This seams to me, still a corner case supposed to be fixed at > orderly_power_off, not at thermal. But.. > >> >> However, there is no clean way of detecting such failure of userspace >> powering off the system. In such scenarios, it is necessary for a backup >> workqueue to be able to force a shutdown of the system when orderly >> shutdown is not successful after a configurable time period. >> > > Given that system running hot is a thermal issue, I guess we care more > on this matter then.. Yes! > >> Reported-by: Nishanth Menon >> Signed-off-by: Keerthy >> --- >> drivers/thermal/Kconfig | 13 +++++++++++++ >> drivers/thermal/thermal_core.c | 42 ++++++++++++++++++++++++++++++++++++++++++ >> 2 files changed, 55 insertions(+) >> >> diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig >> index 0a16cf4..4cc55f9 100644 >> --- a/drivers/thermal/Kconfig >> +++ b/drivers/thermal/Kconfig >> @@ -15,6 +15,19 @@ menuconfig THERMAL >> >> if THERMAL >> >> +config THERMAL_EMERGENCY_POWEROFF_DELAY_MS >> + int "Emergency poweroff delay in milli-seconds" >> + depends on THERMAL >> + default 0 >> + help >> + The number of milliseconds to delay before emergency >> + poweroff kicks in. The delay should be carefully profiled >> + so as to give adequate time for orderly_poweroff. In case >> + of failure of an orderly_poweroff the emergency poweroff >> + kicks in after the delay has elapsed and shuts down the system. >> + >> + If set to 0 poweroff will happen immediately. >> + >> config THERMAL_HWMON >> bool >> prompt "Expose thermal sensors as hwmon device" >> diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c >> index 11f0675..dc7fdd4 100644 >> --- a/drivers/thermal/thermal_core.c >> +++ b/drivers/thermal/thermal_core.c >> @@ -322,6 +322,47 @@ static void handle_non_critical_trips(struct thermal_zone_device *tz, >> def_governor->throttle(tz, trip); >> } >> >> +/** >> + * emergency_poweroff_func - emergency poweroff work after a known delay >> + * @work: work_struct associated with the emergency poweroff function >> + * >> + * This function is called in very critical situations to force >> + * a kernel poweroff after a configurable timeout value. >> + */ >> +static void emergency_poweroff_func(struct work_struct *work) >> +{ >> + /** >> + * We have reached here after the emergency thermal shutdown >> + * Waiting period has expired. This means orderly_poweroff has >> + * not been able to shut off the system for some reason. >> + * Try to shut down the system immediately using pm_power_off >> + * if populated >> + */ > > The above is not a kernel doc entry... I will fix that. > >> + pr_warn("Attempting kernel_power_off\n"); >> + if (pm_power_off) >> + pm_power_off(); > > Why not calling kernel_power_off() directly instead? That is what is called by orderly > power off in case it fails, which seams to be the missing part when > user land returns success, and therefore we don't call > kernel_power_off(). That path goes through the machine_power_off(), > which seams to be the default for pm_power_off() anyway. > > kernel_power_off() handles the power off system call too. Yes. This is after orderly_poweroff fails so i felt why go through kernel_power_off and directly call pm_power_off which directly pulls out the power plug. This is in dire straits situation. Hence preferred to call the last piece directly. > >> + >> + /** > > not a kernel doc entry... Okay. > >> + * Worst of the worst case trigger emergency restart >> + */ >> + pr_warn("kernel_power_off has failed! Attempting emergency_restart\n"); >> + emergency_restart(); >> +} >> + >> +static DECLARE_DELAYED_WORK(emergency_poweroff_work, emergency_poweroff_func); >> + >> +/** >> + * emergency_poweroff - Trigger an emergency system poweroff >> + * >> + * This may be called from any critical situation to trigger a system shutdown >> + * after a known period of time. By default the delay is 0 millisecond >> + */ >> +void thermal_emergency_poweroff(void) >> +{ >> + schedule_delayed_work(&emergency_poweroff_work, >> + msecs_to_jiffies(CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS)); >> +} >> + >> static void handle_critical_trips(struct thermal_zone_device *tz, >> int trip, enum thermal_trip_type trip_type) >> { >> @@ -343,6 +384,7 @@ static void handle_critical_trips(struct thermal_zone_device *tz, >> "critical temperature reached(%d C),shutting down\n", >> tz->temperature / 1000); >> orderly_poweroff(true); >> + thermal_emergency_poweroff(); > > Shouldn't we start count the timeout before calling orderly_poweroff? Okay yes. That makes more sense. Queue the emergency function, start the countdown and immediately call the orderly_poweroff. I will fix the above comments and send a v2. I still want to go with pm_power_off over kernel_poweroff as we have already elapsed the time out and the first thing we want is to shut off the SoC! Let me know. > >> } >> } >> >> -- >> 1.9.1 >>