From: Hans Verkuil <hverkuil-cisco@xs4all.nl>
To: Igor Matheus Andrade Torrente <igormtorrente@gmail.com>,
mchehab@kernel.org, skhan@linuxfoundation.org
Cc: linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
kernel test robot <lkp@intel.com>,
syzbot+b2391895514ed9ef4a8e@syzkaller.appspotmail.com
Subject: Re: [PATCH v4] media: em28xx: Fix race condition between open and init function
Date: Wed, 5 May 2021 13:21:39 +0200 [thread overview]
Message-ID: <f7721e24-e153-7fa7-6c2d-505f91bac112@xs4all.nl> (raw)
In-Reply-To: <20210503173716.21652-2-igormtorrente@gmail.com>
Hi Igor,
On 03/05/2021 19:37, Igor Matheus Andrade Torrente wrote:
> Fixes a race condition - for lack of a more precise term - between
> em28xx_v4l2_open and em28xx_v4l2_init, by detaching the v4l2_dev,
> media_pad and vdev structs from the em28xx_v4l2, and managing the
> lifetime of those objects more dynamicaly.
>
> The race happens when a thread[1] - containing the em28xx_v4l2_init()
> code - calls the v4l2_mc_create_media_graph(), and it return a error,
> if a thread[2] - running v4l2_open() - pass the verification point
> and reaches the em28xx_v4l2_open() before the thread[1] finishes
> the deregistration of v4l2 subsystem, the thread[1] will free all
> resources before the em28xx_v4l2_open() can process their things,
> because the em28xx_v4l2_init() has the dev->lock. And all this lead
> the thread[2] to cause a user-after-free.
This isn't the right approach. This driver is quite old and tried to do
life-time management itself (and poorly at that), while today there are
better mechanisms, something that your patch tries to use to some extent.
The cleanup for em28xx-video.c has to take place in the release callback
of struct v4l2_device. All allocated memory can be cleaned up there. The
release callback of the video_device structs can just remains as it is today,
i.e. video_device_release_empty.
Also, the video_unregister_device calls should be replaced by
vb2_video_unregister_device, see include/media/videobuf2-v4l2.h why.
The v4l2->ref can be removed, since struct v4l2_device takes over that role.
And when the release callback of v4l2_device is called, then you can call
kref_get(&dev->ref). That reference count really just needs to be incremented
once in em28xx_v4l2_init and decremented once in the v4l2_device release callback,
and not for every open and close.
I hope I haven't forgotten anything.
Regards,
Hans
>
> Reported-by: kernel test robot <lkp@intel.com>
> Reported-and-tested-by: syzbot+b2391895514ed9ef4a8e@syzkaller.appspotmail.com
> Signed-off-by: Igor Matheus Andrade Torrente <igormtorrente@gmail.com>
> ---
>
> V2: Add v4l2_i2c_new_subdev null check
> Deal with v4l2 subdevs dependencies
>
> V3: Fix link error when compiled as a module
>
> V4: Remove duplicated v4l2_device_disconnect
> in the em28xx_v4l2_fini
>
> ---
> drivers/media/usb/em28xx/em28xx-camera.c | 4 +-
> drivers/media/usb/em28xx/em28xx-video.c | 299 +++++++++++++++--------
> drivers/media/usb/em28xx/em28xx.h | 6 +-
> 3 files changed, 208 insertions(+), 101 deletions(-)
>
> diff --git a/drivers/media/usb/em28xx/em28xx-camera.c b/drivers/media/usb/em28xx/em28xx-camera.c
> index d1e66b503f4d..436c5a8cbbb6 100644
> --- a/drivers/media/usb/em28xx/em28xx-camera.c
> +++ b/drivers/media/usb/em28xx/em28xx-camera.c
> @@ -340,7 +340,7 @@ int em28xx_init_camera(struct em28xx *dev)
> v4l2->sensor_xtal = 4300000;
> pdata.xtal = v4l2->sensor_xtal;
> if (NULL ==
> - v4l2_i2c_new_subdev_board(&v4l2->v4l2_dev, adap,
> + v4l2_i2c_new_subdev_board(v4l2->v4l2_dev, adap,
> &mt9v011_info, NULL))
> return -ENODEV;
> v4l2->vinmode = EM28XX_VINMODE_RGB8_GRBG;
> @@ -394,7 +394,7 @@ int em28xx_init_camera(struct em28xx *dev)
> v4l2->sensor_yres = 480;
>
> subdev =
> - v4l2_i2c_new_subdev_board(&v4l2->v4l2_dev, adap,
> + v4l2_i2c_new_subdev_board(v4l2->v4l2_dev, adap,
> &ov2640_info, NULL);
> if (!subdev)
> return -ENODEV;
> diff --git a/drivers/media/usb/em28xx/em28xx-video.c b/drivers/media/usb/em28xx/em28xx-video.c
> index 6b84c3413e83..6bc6baf88644 100644
> --- a/drivers/media/usb/em28xx/em28xx-video.c
> +++ b/drivers/media/usb/em28xx/em28xx-video.c
> @@ -184,7 +184,7 @@ static int em28xx_vbi_supported(struct em28xx *dev)
> */
> static void em28xx_wake_i2c(struct em28xx *dev)
> {
> - struct v4l2_device *v4l2_dev = &dev->v4l2->v4l2_dev;
> + struct v4l2_device *v4l2_dev = dev->v4l2->v4l2_dev;
>
> v4l2_device_call_all(v4l2_dev, 0, core, reset, 0);
> v4l2_device_call_all(v4l2_dev, 0, video, s_routing,
> @@ -974,9 +974,17 @@ static void em28xx_v4l2_create_entities(struct em28xx *dev)
> struct em28xx_v4l2 *v4l2 = dev->v4l2;
> int ret, i;
>
> + v4l2->video_pad = kzalloc(sizeof(*v4l2->video_pad), GFP_KERNEL);
> + if (!v4l2->video_pad) {
> + dev_err(&dev->intf->dev,
> + "failed to allocate video pad memory!\n");
> + v4l2->vdev->entity.num_pads = 0;
> + return;
> + }
> +
> /* Initialize Video, VBI and Radio pads */
> - v4l2->video_pad.flags = MEDIA_PAD_FL_SINK;
> - ret = media_entity_pads_init(&v4l2->vdev.entity, 1, &v4l2->video_pad);
> + v4l2->video_pad->flags = MEDIA_PAD_FL_SINK;
> + ret = media_entity_pads_init(&v4l2->vdev->entity, 1, v4l2->video_pad);
> if (ret < 0)
> dev_err(&dev->intf->dev,
> "failed to initialize video media entity!\n");
> @@ -1132,11 +1140,11 @@ int em28xx_start_analog_streaming(struct vb2_queue *vq, unsigned int count)
> f.type = V4L2_TUNER_RADIO;
> else
> f.type = V4L2_TUNER_ANALOG_TV;
> - v4l2_device_call_all(&v4l2->v4l2_dev,
> + v4l2_device_call_all(v4l2->v4l2_dev,
> 0, tuner, s_frequency, &f);
>
> /* Enable video stream at TV decoder */
> - v4l2_device_call_all(&v4l2->v4l2_dev, 0, video, s_stream, 1);
> + v4l2_device_call_all(v4l2->v4l2_dev, 0, video, s_stream, 1);
> }
>
> v4l2->streaming_users++;
> @@ -1157,7 +1165,7 @@ static void em28xx_stop_streaming(struct vb2_queue *vq)
>
> if (v4l2->streaming_users-- == 1) {
> /* Disable video stream at TV decoder */
> - v4l2_device_call_all(&v4l2->v4l2_dev, 0, video, s_stream, 0);
> + v4l2_device_call_all(v4l2->v4l2_dev, 0, video, s_stream, 0);
>
> /* Last active user, so shutdown all the URBS */
> em28xx_uninit_usb_xfer(dev, EM28XX_ANALOG_MODE);
> @@ -1192,7 +1200,7 @@ void em28xx_stop_vbi_streaming(struct vb2_queue *vq)
>
> if (v4l2->streaming_users-- == 1) {
> /* Disable video stream at TV decoder */
> - v4l2_device_call_all(&v4l2->v4l2_dev, 0, video, s_stream, 0);
> + v4l2_device_call_all(v4l2->v4l2_dev, 0, video, s_stream, 0);
>
> /* Last active user, so shutdown all the URBS */
> em28xx_uninit_usb_xfer(dev, EM28XX_ANALOG_MODE);
> @@ -1286,7 +1294,7 @@ static int em28xx_vb2_setup(struct em28xx *dev)
>
> static void video_mux(struct em28xx *dev, int index)
> {
> - struct v4l2_device *v4l2_dev = &dev->v4l2->v4l2_dev;
> + struct v4l2_device *v4l2_dev = dev->v4l2->v4l2_dev;
>
> dev->ctl_input = index;
> dev->ctl_ainput = INPUT(index)->amux;
> @@ -1565,7 +1573,7 @@ static int vidioc_querystd(struct file *file, void *priv, v4l2_std_id *norm)
> {
> struct em28xx *dev = video_drvdata(file);
>
> - v4l2_device_call_all(&dev->v4l2->v4l2_dev, 0, video, querystd, norm);
> + v4l2_device_call_all(dev->v4l2->v4l2_dev, 0, video, querystd, norm);
>
> return 0;
> }
> @@ -1596,7 +1604,7 @@ static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id norm)
> &v4l2->hscale, &v4l2->vscale);
>
> em28xx_resolution_set(dev);
> - v4l2_device_call_all(&v4l2->v4l2_dev, 0, video, s_std, v4l2->norm);
> + v4l2_device_call_all(v4l2->v4l2_dev, 0, video, s_std, v4l2->norm);
>
> return 0;
> }
> @@ -1616,7 +1624,7 @@ static int vidioc_g_parm(struct file *file, void *priv,
> p->parm.capture.readbuffers = EM28XX_MIN_BUF;
> p->parm.capture.capability = V4L2_CAP_TIMEPERFRAME;
> if (dev->is_webcam) {
> - rc = v4l2_device_call_until_err(&v4l2->v4l2_dev, 0,
> + rc = v4l2_device_call_until_err(v4l2->v4l2_dev, 0,
> video, g_frame_interval, &ival);
> if (!rc)
> p->parm.capture.timeperframe = ival.interval;
> @@ -1648,7 +1656,7 @@ static int vidioc_s_parm(struct file *file, void *priv,
> memset(&p->parm, 0, sizeof(p->parm));
> p->parm.capture.readbuffers = EM28XX_MIN_BUF;
> p->parm.capture.capability = V4L2_CAP_TIMEPERFRAME;
> - rc = v4l2_device_call_until_err(&dev->v4l2->v4l2_dev, 0,
> + rc = v4l2_device_call_until_err(dev->v4l2->v4l2_dev, 0,
> video, s_frame_interval, &ival);
> if (!rc)
> p->parm.capture.timeperframe = ival.interval;
> @@ -1675,7 +1683,7 @@ static int vidioc_enum_input(struct file *file, void *priv,
> if (INPUT(n)->type == EM28XX_VMUX_TELEVISION)
> i->type = V4L2_INPUT_TYPE_TUNER;
>
> - i->std = dev->v4l2->vdev.tvnorms;
> + i->std = dev->v4l2->vdev->tvnorms;
> /* webcams do not have the STD API */
> if (dev->is_webcam)
> i->capabilities = 0;
> @@ -1839,7 +1847,7 @@ static int vidioc_g_tuner(struct file *file, void *priv,
>
> strscpy(t->name, "Tuner", sizeof(t->name));
>
> - v4l2_device_call_all(&dev->v4l2->v4l2_dev, 0, tuner, g_tuner, t);
> + v4l2_device_call_all(dev->v4l2->v4l2_dev, 0, tuner, g_tuner, t);
> return 0;
> }
>
> @@ -1851,7 +1859,7 @@ static int vidioc_s_tuner(struct file *file, void *priv,
> if (t->index != 0)
> return -EINVAL;
>
> - v4l2_device_call_all(&dev->v4l2->v4l2_dev, 0, tuner, s_tuner, t);
> + v4l2_device_call_all(dev->v4l2->v4l2_dev, 0, tuner, s_tuner, t);
> return 0;
> }
>
> @@ -1878,8 +1886,8 @@ static int vidioc_s_frequency(struct file *file, void *priv,
> if (f->tuner != 0)
> return -EINVAL;
>
> - v4l2_device_call_all(&v4l2->v4l2_dev, 0, tuner, s_frequency, f);
> - v4l2_device_call_all(&v4l2->v4l2_dev, 0, tuner, g_frequency, &new_freq);
> + v4l2_device_call_all(v4l2->v4l2_dev, 0, tuner, s_frequency, f);
> + v4l2_device_call_all(v4l2->v4l2_dev, 0, tuner, g_frequency, &new_freq);
> v4l2->frequency = new_freq.frequency;
>
> return 0;
> @@ -1897,7 +1905,7 @@ static int vidioc_g_chip_info(struct file *file, void *priv,
> strscpy(chip->name, "ac97", sizeof(chip->name));
> else
> strscpy(chip->name,
> - dev->v4l2->v4l2_dev.name, sizeof(chip->name));
> + dev->v4l2->v4l2_dev->name, sizeof(chip->name));
> return 0;
> }
>
> @@ -2095,7 +2103,7 @@ static int radio_g_tuner(struct file *file, void *priv,
>
> strscpy(t->name, "Radio", sizeof(t->name));
>
> - v4l2_device_call_all(&dev->v4l2->v4l2_dev, 0, tuner, g_tuner, t);
> + v4l2_device_call_all(dev->v4l2->v4l2_dev, 0, tuner, g_tuner, t);
>
> return 0;
> }
> @@ -2108,7 +2116,7 @@ static int radio_s_tuner(struct file *file, void *priv,
> if (t->index != 0)
> return -EINVAL;
>
> - v4l2_device_call_all(&dev->v4l2->v4l2_dev, 0, tuner, s_tuner, t);
> + v4l2_device_call_all(dev->v4l2->v4l2_dev, 0, tuner, s_tuner, t);
>
> return 0;
> }
> @@ -2160,6 +2168,11 @@ static int em28xx_v4l2_open(struct file *filp)
> if (mutex_lock_interruptible(&dev->lock))
> return -ERESTARTSYS;
>
> + if (!dev->v4l2) {
> + mutex_unlock(&dev->lock);
> + return -ENODEV;
> + }
> +
> ret = v4l2_fh_open(filp);
> if (ret) {
> dev_err(&dev->intf->dev,
> @@ -2184,9 +2197,10 @@ static int em28xx_v4l2_open(struct file *filp)
>
> if (vdev->vfl_type == VFL_TYPE_RADIO) {
> em28xx_videodbg("video_open: setting radio device\n");
> - v4l2_device_call_all(&v4l2->v4l2_dev, 0, tuner, s_radio);
> + v4l2_device_call_all(v4l2->v4l2_dev, 0, tuner, s_radio);
> }
>
> + v4l2_device_get(v4l2->v4l2_dev);
> kref_get(&dev->ref);
> kref_get(&v4l2->ref);
> v4l2->users++;
> @@ -2222,7 +2236,7 @@ static int em28xx_v4l2_fini(struct em28xx *dev)
>
> mutex_lock(&dev->lock);
>
> - v4l2_device_disconnect(&v4l2->v4l2_dev);
> + v4l2_device_disconnect(v4l2->v4l2_dev);
>
> em28xx_uninit_usb_xfer(dev, EM28XX_ANALOG_MODE);
>
> @@ -2238,14 +2252,14 @@ static int em28xx_v4l2_fini(struct em28xx *dev)
> video_device_node_name(&v4l2->vbi_dev));
> video_unregister_device(&v4l2->vbi_dev);
> }
> - if (video_is_registered(&v4l2->vdev)) {
> + if (video_is_registered(v4l2->vdev)) {
> dev_info(&dev->intf->dev, "V4L2 device %s deregistered\n",
> - video_device_node_name(&v4l2->vdev));
> - video_unregister_device(&v4l2->vdev);
> + video_device_node_name(v4l2->vdev));
> + video_unregister_device(v4l2->vdev);
> }
>
> v4l2_ctrl_handler_free(&v4l2->ctrl_handler);
> - v4l2_device_unregister(&v4l2->v4l2_dev);
> + v4l2_device_put(v4l2->v4l2_dev);
>
> kref_put(&v4l2->ref, em28xx_free_v4l2);
>
> @@ -2305,7 +2319,7 @@ static int em28xx_v4l2_close(struct file *filp)
> goto exit;
>
> /* Save some power by putting tuner to sleep */
> - v4l2_device_call_all(&v4l2->v4l2_dev, 0, tuner, standby);
> + v4l2_device_call_all(v4l2->v4l2_dev, 0, tuner, standby);
>
> /* do this before setting alternate! */
> em28xx_set_mode(dev, EM28XX_SUSPEND);
> @@ -2322,6 +2336,7 @@ static int em28xx_v4l2_close(struct file *filp)
> }
>
> exit:
> + v4l2_device_put(v4l2->v4l2_dev);
> v4l2->users--;
> kref_put(&v4l2->ref, em28xx_free_v4l2);
> mutex_unlock(&dev->lock);
> @@ -2330,6 +2345,17 @@ static int em28xx_v4l2_close(struct file *filp)
> return 0;
> }
>
> +static void em28xx_vdev_release(struct video_device *vdev)
> +{
> +#ifdef CONFIG_MEDIA_CONTROLLER
> + int i;
> +
> + for (i = 0; i < vdev->entity.num_pads; i++)
> + kfree(&vdev->entity.pads[i]);
> +#endif
> + kfree(vdev);
> +}
> +
> static const struct v4l2_file_operations em28xx_v4l_fops = {
> .owner = THIS_MODULE,
> .open = em28xx_v4l2_open,
> @@ -2387,7 +2413,7 @@ static const struct v4l2_ioctl_ops video_ioctl_ops = {
> static const struct video_device em28xx_video_template = {
> .fops = &em28xx_v4l_fops,
> .ioctl_ops = &video_ioctl_ops,
> - .release = video_device_release_empty,
> + .release = em28xx_vdev_release,
> .tvnorms = V4L2_STD_ALL,
> };
>
> @@ -2445,7 +2471,7 @@ static void em28xx_vdev_init(struct em28xx *dev,
> const char *type_name)
> {
> *vfd = *template;
> - vfd->v4l2_dev = &dev->v4l2->v4l2_dev;
> + vfd->v4l2_dev = dev->v4l2->v4l2_dev;
> vfd->lock = &dev->lock;
> if (dev->is_webcam)
> vfd->tvnorms = 0;
> @@ -2459,7 +2485,7 @@ static void em28xx_vdev_init(struct em28xx *dev,
> static void em28xx_tuner_setup(struct em28xx *dev, unsigned short tuner_addr)
> {
> struct em28xx_v4l2 *v4l2 = dev->v4l2;
> - struct v4l2_device *v4l2_dev = &v4l2->v4l2_dev;
> + struct v4l2_device *v4l2_dev = v4l2->v4l2_dev;
> struct tuner_setup tun_setup;
> struct v4l2_frequency f;
>
> @@ -2517,6 +2543,22 @@ static void em28xx_tuner_setup(struct em28xx *dev, unsigned short tuner_addr)
> v4l2_device_call_all(v4l2_dev, 0, tuner, s_frequency, &f);
> }
>
> +static void em28xx_v4l2_dev_release(struct v4l2_device *v4l2_dev)
> +{
> + struct v4l2_subdev *sd, *next;
> + struct i2c_client *client;
> +
> + list_for_each_entry_safe(sd, next, &v4l2_dev->subdevs, list) {
> + v4l2_device_unregister_subdev(sd);
> + client = sd->dev_priv;
> + if (client && !client->dev.of_node && !client->dev.fwnode &&
> + sd->flags & V4L2_SUBDEV_FL_IS_I2C)
> + i2c_unregister_device(client);
> + }
> +
> + kfree(v4l2_dev);
> +}
> +
> static int em28xx_v4l2_init(struct em28xx *dev)
> {
> u8 val;
> @@ -2524,6 +2566,7 @@ static int em28xx_v4l2_init(struct em28xx *dev)
> unsigned int maxw;
> struct v4l2_ctrl_handler *hdl;
> struct em28xx_v4l2 *v4l2;
> + struct v4l2_subdev *sd;
>
> if (dev->is_audio_only) {
> /* Shouldn't initialize IR for this interface */
> @@ -2541,26 +2584,35 @@ static int em28xx_v4l2_init(struct em28xx *dev)
>
> v4l2 = kzalloc(sizeof(*v4l2), GFP_KERNEL);
> if (!v4l2) {
> - mutex_unlock(&dev->lock);
> - return -ENOMEM;
> + ret = -ENOMEM;
> + goto v4l2_error;
> }
> +
> kref_init(&v4l2->ref);
> v4l2->dev = dev;
> dev->v4l2 = v4l2;
>
> + v4l2->v4l2_dev = kzalloc(sizeof(*v4l2->v4l2_dev), GFP_KERNEL);
> + if (!v4l2->v4l2_dev) {
> + ret = -ENOMEM;
> + goto v4l2_dev_error;
> + }
> +
> + v4l2->v4l2_dev->release = em28xx_v4l2_dev_release;
> +
> #ifdef CONFIG_MEDIA_CONTROLLER
> - v4l2->v4l2_dev.mdev = dev->media_dev;
> + v4l2->v4l2_dev->mdev = dev->media_dev;
> #endif
> - ret = v4l2_device_register(&dev->intf->dev, &v4l2->v4l2_dev);
> + ret = v4l2_device_register(&dev->intf->dev, v4l2->v4l2_dev);
> if (ret < 0) {
> dev_err(&dev->intf->dev,
> "Call to v4l2_device_register() failed!\n");
> - goto err;
> + goto v4l2_device_register_error;
> }
>
> hdl = &v4l2->ctrl_handler;
> v4l2_ctrl_handler_init(hdl, 8);
> - v4l2->v4l2_dev.ctrl_handler = hdl;
> + v4l2->v4l2_dev->ctrl_handler = hdl;
>
> if (dev->is_webcam)
> v4l2->progressive = true;
> @@ -2574,25 +2626,49 @@ static int em28xx_v4l2_init(struct em28xx *dev)
>
> /* request some modules */
>
> - if (dev->has_msp34xx)
> - v4l2_i2c_new_subdev(&v4l2->v4l2_dev,
> - &dev->i2c_adap[dev->def_i2c_bus],
> - "msp3400", 0, msp3400_addrs);
> + if (dev->has_msp34xx) {
> + sd = v4l2_i2c_new_subdev(v4l2->v4l2_dev,
> + &dev->i2c_adap[dev->def_i2c_bus],
> + "msp3400", 0, msp3400_addrs);
> + if (!sd) {
> + dev_err(&dev->intf->dev,
> + "Error while registering msp34xx v4l2 subdevice!\n");
> + goto v4l2_subdev_register_error;
> + }
> + }
>
> - if (dev->board.decoder == EM28XX_SAA711X)
> - v4l2_i2c_new_subdev(&v4l2->v4l2_dev,
> - &dev->i2c_adap[dev->def_i2c_bus],
> - "saa7115_auto", 0, saa711x_addrs);
> + if (dev->board.decoder == EM28XX_SAA711X) {
> + sd = v4l2_i2c_new_subdev(v4l2->v4l2_dev,
> + &dev->i2c_adap[dev->def_i2c_bus],
> + "saa7115_auto", 0, saa711x_addrs);
> + if (!sd) {
> + dev_err(&dev->intf->dev,
> + "Error while registering EM28XX_SAA711X v4l2 subdevice!\n");
> + goto v4l2_subdev_register_error;
> + }
> + }
>
> - if (dev->board.decoder == EM28XX_TVP5150)
> - v4l2_i2c_new_subdev(&v4l2->v4l2_dev,
> - &dev->i2c_adap[dev->def_i2c_bus],
> - "tvp5150", 0, tvp5150_addrs);
> + if (dev->board.decoder == EM28XX_TVP5150) {
> + sd = v4l2_i2c_new_subdev(v4l2->v4l2_dev,
> + &dev->i2c_adap[dev->def_i2c_bus],
> + "tvp5150", 0, tvp5150_addrs);
> + if (!sd) {
> + dev_err(&dev->intf->dev,
> + "Error while registering EM28XX_TVP5150 v4l2 subdevice!\n");
> + goto v4l2_subdev_register_error;
> + }
> + }
>
> - if (dev->board.adecoder == EM28XX_TVAUDIO)
> - v4l2_i2c_new_subdev(&v4l2->v4l2_dev,
> - &dev->i2c_adap[dev->def_i2c_bus],
> - "tvaudio", dev->board.tvaudio_addr, NULL);
> + if (dev->board.adecoder == EM28XX_TVAUDIO) {
> + sd = v4l2_i2c_new_subdev(v4l2->v4l2_dev,
> + &dev->i2c_adap[dev->def_i2c_bus],
> + "tvaudio", dev->board.tvaudio_addr, NULL);
> + if (!sd) {
> + dev_err(&dev->intf->dev,
> + "Error while registering EM28XX_TVAUDIO v4l2 subdevice!\n");
> + goto v4l2_subdev_register_error;
> + }
> + }
>
> /* Initialize tuner and camera */
>
> @@ -2600,33 +2676,55 @@ static int em28xx_v4l2_init(struct em28xx *dev)
> unsigned short tuner_addr = dev->board.tuner_addr;
> int has_demod = (dev->board.tda9887_conf & TDA9887_PRESENT);
>
> - if (dev->board.radio.type)
> - v4l2_i2c_new_subdev(&v4l2->v4l2_dev,
> - &dev->i2c_adap[dev->def_i2c_bus],
> - "tuner", dev->board.radio_addr,
> - NULL);
> -
> - if (has_demod)
> - v4l2_i2c_new_subdev(&v4l2->v4l2_dev,
> - &dev->i2c_adap[dev->def_i2c_bus],
> - "tuner", 0,
> - v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
> + if (dev->board.radio.type) {
> + sd = v4l2_i2c_new_subdev(v4l2->v4l2_dev,
> + &dev->i2c_adap[dev->def_i2c_bus],
> + "tuner", dev->board.radio_addr,
> + NULL);
> + if (!sd) {
> + dev_err(&dev->intf->dev,
> + "Error while registering <name1> v4l2 subdevice!\n");
> + goto v4l2_subdev_register_error;
> + }
> + }
> +
> + if (has_demod) {
> + sd = v4l2_i2c_new_subdev(v4l2->v4l2_dev,
> + &dev->i2c_adap[dev->def_i2c_bus],
> + "tuner", 0,
> + v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
> + if (!sd) {
> + dev_err(&dev->intf->dev,
> + "Error while registering <name2> v4l2 subdevice!\n");
> + goto v4l2_subdev_register_error;
> + }
> + }
> +
> if (tuner_addr == 0) {
> enum v4l2_i2c_tuner_type type =
> has_demod ? ADDRS_TV_WITH_DEMOD : ADDRS_TV;
> - struct v4l2_subdev *sd;
>
> - sd = v4l2_i2c_new_subdev(&v4l2->v4l2_dev,
> + sd = v4l2_i2c_new_subdev(v4l2->v4l2_dev,
> &dev->i2c_adap[dev->def_i2c_bus],
> "tuner", 0,
> v4l2_i2c_tuner_addrs(type));
> -
> - if (sd)
> + if (sd) {
> tuner_addr = v4l2_i2c_subdev_addr(sd);
> + } else {
> + dev_err(&dev->intf->dev,
> + "Error while registering <name3> v4l2 subdevice!\n");
> + goto v4l2_subdev_register_error;
> + }
> +
> } else {
> - v4l2_i2c_new_subdev(&v4l2->v4l2_dev,
> - &dev->i2c_adap[dev->def_i2c_bus],
> - "tuner", tuner_addr, NULL);
> + sd = v4l2_i2c_new_subdev(v4l2->v4l2_dev,
> + &dev->i2c_adap[dev->def_i2c_bus],
> + "tuner", tuner_addr, NULL);
> + if (!sd) {
> + dev_err(&dev->intf->dev,
> + "Error while registering <name4> v4l2 subdevice!\n");
> + goto v4l2_subdev_register_error;
> + }
> }
>
> em28xx_tuner_setup(dev, tuner_addr);
> @@ -2686,7 +2784,7 @@ static int em28xx_v4l2_init(struct em28xx *dev)
>
> /* set default norm */
> v4l2->norm = V4L2_STD_PAL;
> - v4l2_device_call_all(&v4l2->v4l2_dev, 0, video, s_std, v4l2->norm);
> + v4l2_device_call_all(v4l2->v4l2_dev, 0, video, s_std, v4l2->norm);
> v4l2->interlaced_fieldmode = EM28XX_INTERLACED_DEFAULT;
>
> /* Analog specific initialization */
> @@ -2756,40 +2854,45 @@ static int em28xx_v4l2_init(struct em28xx *dev)
> goto unregister_dev;
>
> /* allocate and fill video video_device struct */
> - em28xx_vdev_init(dev, &v4l2->vdev, &em28xx_video_template, "video");
> + v4l2->vdev = kzalloc(sizeof(*v4l2->vdev), GFP_KERNEL);
> + if (!v4l2->vdev) {
> + ret = -ENOMEM;
> + goto unregister_dev;
> + }
> +
> + em28xx_vdev_init(dev, v4l2->vdev, &em28xx_video_template, "video");
> mutex_init(&v4l2->vb_queue_lock);
> mutex_init(&v4l2->vb_vbi_queue_lock);
> - v4l2->vdev.queue = &v4l2->vb_vidq;
> - v4l2->vdev.queue->lock = &v4l2->vb_queue_lock;
> - v4l2->vdev.device_caps = V4L2_CAP_READWRITE | V4L2_CAP_VIDEO_CAPTURE |
> + v4l2->vdev->queue = &v4l2->vb_vidq;
> + v4l2->vdev->queue->lock = &v4l2->vb_queue_lock;
> + v4l2->vdev->device_caps = V4L2_CAP_READWRITE | V4L2_CAP_VIDEO_CAPTURE |
> V4L2_CAP_STREAMING;
> if (dev->int_audio_type != EM28XX_INT_AUDIO_NONE)
> - v4l2->vdev.device_caps |= V4L2_CAP_AUDIO;
> + v4l2->vdev->device_caps |= V4L2_CAP_AUDIO;
> if (dev->tuner_type != TUNER_ABSENT)
> - v4l2->vdev.device_caps |= V4L2_CAP_TUNER;
> -
> + v4l2->vdev->device_caps |= V4L2_CAP_TUNER;
>
> /* disable inapplicable ioctls */
> if (dev->is_webcam) {
> - v4l2_disable_ioctl(&v4l2->vdev, VIDIOC_QUERYSTD);
> - v4l2_disable_ioctl(&v4l2->vdev, VIDIOC_G_STD);
> - v4l2_disable_ioctl(&v4l2->vdev, VIDIOC_S_STD);
> + v4l2_disable_ioctl(v4l2->vdev, VIDIOC_QUERYSTD);
> + v4l2_disable_ioctl(v4l2->vdev, VIDIOC_G_STD);
> + v4l2_disable_ioctl(v4l2->vdev, VIDIOC_S_STD);
> } else {
> - v4l2_disable_ioctl(&v4l2->vdev, VIDIOC_S_PARM);
> + v4l2_disable_ioctl(v4l2->vdev, VIDIOC_S_PARM);
> }
> if (dev->tuner_type == TUNER_ABSENT) {
> - v4l2_disable_ioctl(&v4l2->vdev, VIDIOC_G_TUNER);
> - v4l2_disable_ioctl(&v4l2->vdev, VIDIOC_S_TUNER);
> - v4l2_disable_ioctl(&v4l2->vdev, VIDIOC_G_FREQUENCY);
> - v4l2_disable_ioctl(&v4l2->vdev, VIDIOC_S_FREQUENCY);
> + v4l2_disable_ioctl(v4l2->vdev, VIDIOC_G_TUNER);
> + v4l2_disable_ioctl(v4l2->vdev, VIDIOC_S_TUNER);
> + v4l2_disable_ioctl(v4l2->vdev, VIDIOC_G_FREQUENCY);
> + v4l2_disable_ioctl(v4l2->vdev, VIDIOC_S_FREQUENCY);
> }
> if (dev->int_audio_type == EM28XX_INT_AUDIO_NONE) {
> - v4l2_disable_ioctl(&v4l2->vdev, VIDIOC_G_AUDIO);
> - v4l2_disable_ioctl(&v4l2->vdev, VIDIOC_S_AUDIO);
> + v4l2_disable_ioctl(v4l2->vdev, VIDIOC_G_AUDIO);
> + v4l2_disable_ioctl(v4l2->vdev, VIDIOC_S_AUDIO);
> }
>
> /* register v4l2 video video_device */
> - ret = video_register_device(&v4l2->vdev, VFL_TYPE_VIDEO,
> + ret = video_register_device(v4l2->vdev, VFL_TYPE_VIDEO,
> video_nr[dev->devno]);
> if (ret) {
> dev_err(&dev->intf->dev,
> @@ -2863,7 +2966,7 @@ static int em28xx_v4l2_init(struct em28xx *dev)
>
> dev_info(&dev->intf->dev,
> "V4L2 video device registered as %s\n",
> - video_device_node_name(&v4l2->vdev));
> + video_device_node_name(v4l2->vdev));
>
> if (video_is_registered(&v4l2->vbi_dev))
> dev_info(&dev->intf->dev,
> @@ -2871,7 +2974,7 @@ static int em28xx_v4l2_init(struct em28xx *dev)
> video_device_node_name(&v4l2->vbi_dev));
>
> /* Save some power by putting tuner to sleep */
> - v4l2_device_call_all(&v4l2->v4l2_dev, 0, tuner, standby);
> + v4l2_device_call_all(v4l2->v4l2_dev, 0, tuner, standby);
>
> /* initialize videobuf2 stuff */
> em28xx_vb2_setup(dev);
> @@ -2897,18 +3000,22 @@ static int em28xx_v4l2_init(struct em28xx *dev)
> video_device_node_name(&v4l2->vbi_dev));
> video_unregister_device(&v4l2->vbi_dev);
> }
> - if (video_is_registered(&v4l2->vdev)) {
> + if (video_is_registered(v4l2->vdev)) {
> dev_info(&dev->intf->dev,
> "V4L2 device %s deregistered\n",
> - video_device_node_name(&v4l2->vdev));
> - video_unregister_device(&v4l2->vdev);
> + video_device_node_name(v4l2->vdev));
> + video_unregister_device(v4l2->vdev);
> }
>
> v4l2_ctrl_handler_free(&v4l2->ctrl_handler);
> - v4l2_device_unregister(&v4l2->v4l2_dev);
> -err:
> +v4l2_subdev_register_error:
> + v4l2_device_disconnect(v4l2->v4l2_dev);
> +v4l2_device_register_error:
> + v4l2_device_put(v4l2->v4l2_dev);
> +v4l2_dev_error:
> dev->v4l2 = NULL;
> kref_put(&v4l2->ref, em28xx_free_v4l2);
> +v4l2_error:
> mutex_unlock(&dev->lock);
> return ret;
> }
> diff --git a/drivers/media/usb/em28xx/em28xx.h b/drivers/media/usb/em28xx/em28xx.h
> index 6648e11f1271..dbcc297b5a0d 100644
> --- a/drivers/media/usb/em28xx/em28xx.h
> +++ b/drivers/media/usb/em28xx/em28xx.h
> @@ -552,10 +552,10 @@ struct em28xx_v4l2 {
> struct kref ref;
> struct em28xx *dev;
>
> - struct v4l2_device v4l2_dev;
> + struct v4l2_device *v4l2_dev;
> struct v4l2_ctrl_handler ctrl_handler;
>
> - struct video_device vdev;
> + struct video_device *vdev;
> struct video_device vbi_dev;
> struct video_device radio_dev;
>
> @@ -601,7 +601,7 @@ struct em28xx_v4l2 {
> unsigned int field_count;
>
> #ifdef CONFIG_MEDIA_CONTROLLER
> - struct media_pad video_pad, vbi_pad;
> + struct media_pad *video_pad, vbi_pad;
> struct media_entity *decoder;
> #endif
> };
>
next prev parent reply other threads:[~2021-05-05 11:21 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-03 17:37 [PATCH] media: em28xx: Fix possible memory leak of em28xx struct Igor Matheus Andrade Torrente
2021-05-03 17:37 ` [PATCH v4] media: em28xx: Fix race condition between open and init function Igor Matheus Andrade Torrente
2021-05-05 11:21 ` Hans Verkuil [this message]
2021-05-05 19:54 ` Igor Torrente
2021-05-06 7:47 ` Hans Verkuil
2021-05-06 13:37 ` Igor Torrente
2021-05-03 20:06 ` [PATCH] media: em28xx: Fix possible memory leak of em28xx struct Shuah Khan
2021-05-04 19:07 ` Igor Torrente
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f7721e24-e153-7fa7-6c2d-505f91bac112@xs4all.nl \
--to=hverkuil-cisco@xs4all.nl \
--cc=igormtorrente@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=lkp@intel.com \
--cc=mchehab@kernel.org \
--cc=skhan@linuxfoundation.org \
--cc=syzbot+b2391895514ed9ef4a8e@syzkaller.appspotmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).