linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v3 1/2] drm/msm: Add speed-bin support to a618 gpu
@ 2020-12-07 10:42 Akhil P Oommen
  2020-12-07 10:42 ` [PATCH v3 2/2] arm: dts: sc7180: Add support for gpu fuse Akhil P Oommen
                   ` (2 more replies)
  0 siblings, 3 replies; 5+ messages in thread
From: Akhil P Oommen @ 2020-12-07 10:42 UTC (permalink / raw)
  To: freedreno, devicetree
  Cc: robh, dri-devel, linux-arm-msm, linux-kernel, jcrouse, mka,
	robdclark, dianders

Some GPUs support different max frequencies depending on the platform.
To identify the correct variant, we should check the gpu speedbin
fuse value. Add support for this speedbin detection to a6xx family
along with the required fuse details for a618 gpu.

Signed-off-by: Akhil P Oommen <akhilpo@codeaurora.org>
---
Changes from v2:
	1. Made the changes a6xx specific to save space.
Changes from v1:
	1. Added the changes to support a618 sku to the series.
	2. Avoid failing probe in case of an unsupported sku. (Rob)

 drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 74 +++++++++++++++++++++++++++++++++++
 drivers/gpu/drm/msm/adreno/a6xx_gpu.h |  2 +
 2 files changed, 76 insertions(+)

diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
index 1306618..6304578 100644
--- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
+++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
@@ -10,10 +10,13 @@
 
 #include <linux/bitfield.h>
 #include <linux/devfreq.h>
+#include <linux/nvmem-consumer.h>
 #include <linux/soc/qcom/llcc-qcom.h>
 
 #define GPU_PAS_ID 13
 
+const u32 a618_speedbins[] = {0, 169, 174};
+
 static inline bool _a6xx_check_idle(struct msm_gpu *gpu)
 {
 	struct adreno_gpu *adreno_gpu = to_adreno_gpu(gpu);
@@ -1208,6 +1211,10 @@ static void a6xx_destroy(struct msm_gpu *gpu)
 	a6xx_gmu_remove(a6xx_gpu);
 
 	adreno_gpu_cleanup(adreno_gpu);
+
+	if (a6xx_gpu->opp_table)
+		dev_pm_opp_put_supported_hw(a6xx_gpu->opp_table);
+
 	kfree(a6xx_gpu);
 }
 
@@ -1264,6 +1271,67 @@ static uint32_t a6xx_get_rptr(struct msm_gpu *gpu, struct msm_ringbuffer *ring)
 	return ring->memptrs->rptr = gpu_read(gpu, REG_A6XX_CP_RB_RPTR);
 }
 
+static u32 fuse_to_supp_hw(struct device *dev, u32 revn, u32 fuse)
+{
+	int i;
+
+	if (revn == 618) {
+		for (i = 0; i < ARRAY_SIZE(a618_speedbins); i++) {
+			if (fuse == a618_speedbins[i])
+				return  (1 << i);
+		}
+	}
+
+	DRM_DEV_ERROR(dev,
+			"missing support for speed-bin: %u. Some OPPs may not be supported by hardware",
+			fuse);
+	return ~0U;
+}
+
+static int a6xx_set_supported_hw(struct device *dev, struct a6xx_gpu *a6xx_gpu,
+		u32 revn)
+{
+
+	struct opp_table *opp_table;
+	struct nvmem_cell *cell;
+	u32 supp_hw = ~0U;
+	void *buf;
+
+	cell = nvmem_cell_get(dev, "speed_bin");
+	/*
+	 * -ENOENT means that the platform doesn't support speedbin which is
+	 * fine
+	 */
+	if (PTR_ERR(cell) == -ENOENT)
+		return 0;
+	else if (IS_ERR(cell)) {
+		DRM_DEV_ERROR(dev,
+				"failed to read speed-bin. Some OPPs may not be supported by hardware");
+		goto done;
+	}
+
+	buf = nvmem_cell_read(cell, NULL);
+	if (IS_ERR(buf)) {
+		nvmem_cell_put(cell);
+		DRM_DEV_ERROR(dev,
+				"failed to read speed-bin. Some OPPs may not be supported by hardware");
+		goto done;
+	}
+
+	supp_hw = fuse_to_supp_hw(dev, revn, *((u32 *) buf));
+
+	kfree(buf);
+	nvmem_cell_put(cell);
+
+done:
+	opp_table = dev_pm_opp_set_supported_hw(dev, &supp_hw, 1);
+	if (IS_ERR(opp_table))
+		return PTR_ERR(opp_table);
+
+	a6xx_gpu->opp_table = opp_table;
+	return 0;
+}
+
 static const struct adreno_gpu_funcs funcs = {
 	.base = {
 		.get_param = adreno_get_param,
@@ -1325,6 +1393,12 @@ struct msm_gpu *a6xx_gpu_init(struct drm_device *dev)
 
 	a6xx_llc_slices_init(pdev, a6xx_gpu);
 
+	ret = a6xx_set_supported_hw(&pdev->dev, a6xx_gpu, info->revn);
+	if (ret) {
+		a6xx_destroy(&(a6xx_gpu->base.base));
+		return ERR_PTR(ret);
+	}
+
 	ret = adreno_gpu_init(dev, pdev, adreno_gpu, &funcs, 1);
 	if (ret) {
 		a6xx_destroy(&(a6xx_gpu->base.base));
diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.h b/drivers/gpu/drm/msm/adreno/a6xx_gpu.h
index e793d32..ce0610c 100644
--- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.h
+++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.h
@@ -33,6 +33,8 @@ struct a6xx_gpu {
 	void *llc_slice;
 	void *htw_llc_slice;
 	bool have_mmu500;
+
+	struct opp_table *opp_table;
 };
 
 #define to_a6xx_gpu(x) container_of(x, struct a6xx_gpu, base)
-- 
2.7.4


^ permalink raw reply related	[flat|nested] 5+ messages in thread

* [PATCH v3 2/2] arm: dts: sc7180: Add support for gpu fuse
  2020-12-07 10:42 [PATCH v3 1/2] drm/msm: Add speed-bin support to a618 gpu Akhil P Oommen
@ 2020-12-07 10:42 ` Akhil P Oommen
  2020-12-11 11:55   ` Akhil P Oommen
  2020-12-11 11:54 ` [PATCH v3 1/2] drm/msm: Add speed-bin support to a618 gpu Akhil P Oommen
  2021-01-04 18:07 ` Jordan Crouse
  2 siblings, 1 reply; 5+ messages in thread
From: Akhil P Oommen @ 2020-12-07 10:42 UTC (permalink / raw)
  To: freedreno, devicetree
  Cc: robh, dri-devel, linux-arm-msm, linux-kernel, jcrouse, mka,
	robdclark, dianders

Add support for gpu fuse to help identify the supported opps.

Signed-off-by: Akhil P Oommen <akhilpo@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/sc7180.dtsi | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 6678f1e..8cae3eb 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -675,6 +675,11 @@
 				reg = <0x25b 0x1>;
 				bits = <1 3>;
 			};
+
+			gpu_speed_bin: gpu_speed_bin@1d2 {
+				reg = <0x1d2 0x2>;
+				bits = <5 8>;
+			};
 		};
 
 		sdhc_1: sdhci@7c4000 {
@@ -1907,52 +1912,69 @@
 			operating-points-v2 = <&gpu_opp_table>;
 			qcom,gmu = <&gmu>;
 
+			nvmem-cells = <&gpu_speed_bin>;
+			nvmem-cell-names = "speed_bin";
+
 			interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>;
 			interconnect-names = "gfx-mem";
 
 			gpu_opp_table: opp-table {
 				compatible = "operating-points-v2";
 
+				opp-825000000 {
+					opp-hz = /bits/ 64 <825000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					opp-peak-kBps = <8532000>;
+					opp-supported-hw = <0x04>;
+				};
+
 				opp-800000000 {
 					opp-hz = /bits/ 64 <800000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
 					opp-peak-kBps = <8532000>;
+					opp-supported-hw = <0x07>;
 				};
 
 				opp-650000000 {
 					opp-hz = /bits/ 64 <650000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
 					opp-peak-kBps = <7216000>;
+					opp-supported-hw = <0x07>;
 				};
 
 				opp-565000000 {
 					opp-hz = /bits/ 64 <565000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
 					opp-peak-kBps = <5412000>;
+					opp-supported-hw = <0x07>;
 				};
 
 				opp-430000000 {
 					opp-hz = /bits/ 64 <430000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
 					opp-peak-kBps = <5412000>;
+					opp-supported-hw = <0x07>;
 				};
 
 				opp-355000000 {
 					opp-hz = /bits/ 64 <355000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
 					opp-peak-kBps = <3072000>;
+					opp-supported-hw = <0x07>;
 				};
 
 				opp-267000000 {
 					opp-hz = /bits/ 64 <267000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
 					opp-peak-kBps = <3072000>;
+					opp-supported-hw = <0x07>;
 				};
 
 				opp-180000000 {
 					opp-hz = /bits/ 64 <180000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
 					opp-peak-kBps = <1804000>;
+					opp-supported-hw = <0x07>;
 				};
 			};
 		};
-- 
2.7.4


^ permalink raw reply related	[flat|nested] 5+ messages in thread

* Re: [PATCH v3 1/2] drm/msm: Add speed-bin support to a618 gpu
  2020-12-07 10:42 [PATCH v3 1/2] drm/msm: Add speed-bin support to a618 gpu Akhil P Oommen
  2020-12-07 10:42 ` [PATCH v3 2/2] arm: dts: sc7180: Add support for gpu fuse Akhil P Oommen
@ 2020-12-11 11:54 ` Akhil P Oommen
  2021-01-04 18:07 ` Jordan Crouse
  2 siblings, 0 replies; 5+ messages in thread
From: Akhil P Oommen @ 2020-12-11 11:54 UTC (permalink / raw)
  To: freedreno, devicetree, Jordan Crouse, Rob Clark
  Cc: linux-arm-msm, linux-kernel, dianders, mka, dri-devel

On 12/7/2020 4:12 PM, Akhil P Oommen wrote:
> Some GPUs support different max frequencies depending on the platform.
> To identify the correct variant, we should check the gpu speedbin
> fuse value. Add support for this speedbin detection to a6xx family
> along with the required fuse details for a618 gpu.
> 
> Signed-off-by: Akhil P Oommen <akhilpo@codeaurora.org>
> ---
> Changes from v2:
> 	1. Made the changes a6xx specific to save space.
> Changes from v1:
> 	1. Added the changes to support a618 sku to the series.
> 	2. Avoid failing probe in case of an unsupported sku. (Rob)
> 
>   drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 74 +++++++++++++++++++++++++++++++++++
>   drivers/gpu/drm/msm/adreno/a6xx_gpu.h |  2 +
>   2 files changed, 76 insertions(+)
> 
> diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
> index 1306618..6304578 100644
> --- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
> +++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
> @@ -10,10 +10,13 @@
>   
>   #include <linux/bitfield.h>
>   #include <linux/devfreq.h>
> +#include <linux/nvmem-consumer.h>
>   #include <linux/soc/qcom/llcc-qcom.h>
>   
>   #define GPU_PAS_ID 13
>   
> +const u32 a618_speedbins[] = {0, 169, 174};
> +
>   static inline bool _a6xx_check_idle(struct msm_gpu *gpu)
>   {
>   	struct adreno_gpu *adreno_gpu = to_adreno_gpu(gpu);
> @@ -1208,6 +1211,10 @@ static void a6xx_destroy(struct msm_gpu *gpu)
>   	a6xx_gmu_remove(a6xx_gpu);
>   
>   	adreno_gpu_cleanup(adreno_gpu);
> +
> +	if (a6xx_gpu->opp_table)
> +		dev_pm_opp_put_supported_hw(a6xx_gpu->opp_table);
> +
>   	kfree(a6xx_gpu);
>   }
>   
> @@ -1264,6 +1271,67 @@ static uint32_t a6xx_get_rptr(struct msm_gpu *gpu, struct msm_ringbuffer *ring)
>   	return ring->memptrs->rptr = gpu_read(gpu, REG_A6XX_CP_RB_RPTR);
>   }
>   
> +static u32 fuse_to_supp_hw(struct device *dev, u32 revn, u32 fuse)
> +{
> +	int i;
> +
> +	if (revn == 618) {
> +		for (i = 0; i < ARRAY_SIZE(a618_speedbins); i++) {
> +			if (fuse == a618_speedbins[i])
> +				return  (1 << i);
> +		}
> +	}
> +
> +	DRM_DEV_ERROR(dev,
> +			"missing support for speed-bin: %u. Some OPPs may not be supported by hardware",
> +			fuse);
> +	return ~0U;
> +}
> +
> +static int a6xx_set_supported_hw(struct device *dev, struct a6xx_gpu *a6xx_gpu,
> +		u32 revn)
> +{
> +
> +	struct opp_table *opp_table;
> +	struct nvmem_cell *cell;
> +	u32 supp_hw = ~0U;
> +	void *buf;
> +
> +	cell = nvmem_cell_get(dev, "speed_bin");
> +	/*
> +	 * -ENOENT means that the platform doesn't support speedbin which is
> +	 * fine
> +	 */
> +	if (PTR_ERR(cell) == -ENOENT)
> +		return 0;
> +	else if (IS_ERR(cell)) {
> +		DRM_DEV_ERROR(dev,
> +				"failed to read speed-bin. Some OPPs may not be supported by hardware");
> +		goto done;
> +	}
> +
> +	buf = nvmem_cell_read(cell, NULL);
> +	if (IS_ERR(buf)) {
> +		nvmem_cell_put(cell);
> +		DRM_DEV_ERROR(dev,
> +				"failed to read speed-bin. Some OPPs may not be supported by hardware");
> +		goto done;
> +	}
> +
> +	supp_hw = fuse_to_supp_hw(dev, revn, *((u32 *) buf));
> +
> +	kfree(buf);
> +	nvmem_cell_put(cell);
> +
> +done:
> +	opp_table = dev_pm_opp_set_supported_hw(dev, &supp_hw, 1);
> +	if (IS_ERR(opp_table))
> +		return PTR_ERR(opp_table);
> +
> +	a6xx_gpu->opp_table = opp_table;
> +	return 0;
> +}
> +
>   static const struct adreno_gpu_funcs funcs = {
>   	.base = {
>   		.get_param = adreno_get_param,
> @@ -1325,6 +1393,12 @@ struct msm_gpu *a6xx_gpu_init(struct drm_device *dev)
>   
>   	a6xx_llc_slices_init(pdev, a6xx_gpu);
>   
> +	ret = a6xx_set_supported_hw(&pdev->dev, a6xx_gpu, info->revn);
> +	if (ret) {
> +		a6xx_destroy(&(a6xx_gpu->base.base));
> +		return ERR_PTR(ret);
> +	}
> +
>   	ret = adreno_gpu_init(dev, pdev, adreno_gpu, &funcs, 1);
>   	if (ret) {
>   		a6xx_destroy(&(a6xx_gpu->base.base));
> diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.h b/drivers/gpu/drm/msm/adreno/a6xx_gpu.h
> index e793d32..ce0610c 100644
> --- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.h
> +++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.h
> @@ -33,6 +33,8 @@ struct a6xx_gpu {
>   	void *llc_slice;
>   	void *htw_llc_slice;
>   	bool have_mmu500;
> +
> +	struct opp_table *opp_table;
>   };
>   
>   #define to_a6xx_gpu(x) container_of(x, struct a6xx_gpu, base)
> 

A gentle ping.

-Akhil.

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH v3 2/2] arm: dts: sc7180: Add support for gpu fuse
  2020-12-07 10:42 ` [PATCH v3 2/2] arm: dts: sc7180: Add support for gpu fuse Akhil P Oommen
@ 2020-12-11 11:55   ` Akhil P Oommen
  0 siblings, 0 replies; 5+ messages in thread
From: Akhil P Oommen @ 2020-12-11 11:55 UTC (permalink / raw)
  To: freedreno, devicetree, Rob Herring, Jordan Crouse, Rob Clark
  Cc: linux-arm-msm, linux-kernel, dianders, mka, dri-devel

On 12/7/2020 4:12 PM, Akhil P Oommen wrote:
> Add support for gpu fuse to help identify the supported opps.
> 
> Signed-off-by: Akhil P Oommen <akhilpo@codeaurora.org>
> ---
>   arch/arm64/boot/dts/qcom/sc7180.dtsi | 22 ++++++++++++++++++++++
>   1 file changed, 22 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> index 6678f1e..8cae3eb 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> @@ -675,6 +675,11 @@
>   				reg = <0x25b 0x1>;
>   				bits = <1 3>;
>   			};
> +
> +			gpu_speed_bin: gpu_speed_bin@1d2 {
> +				reg = <0x1d2 0x2>;
> +				bits = <5 8>;
> +			};
>   		};
>   
>   		sdhc_1: sdhci@7c4000 {
> @@ -1907,52 +1912,69 @@
>   			operating-points-v2 = <&gpu_opp_table>;
>   			qcom,gmu = <&gmu>;
>   
> +			nvmem-cells = <&gpu_speed_bin>;
> +			nvmem-cell-names = "speed_bin";
> +
>   			interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>;
>   			interconnect-names = "gfx-mem";
>   
>   			gpu_opp_table: opp-table {
>   				compatible = "operating-points-v2";
>   
> +				opp-825000000 {
> +					opp-hz = /bits/ 64 <825000000>;
> +					opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
> +					opp-peak-kBps = <8532000>;
> +					opp-supported-hw = <0x04>;
> +				};
> +
>   				opp-800000000 {
>   					opp-hz = /bits/ 64 <800000000>;
>   					opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
>   					opp-peak-kBps = <8532000>;
> +					opp-supported-hw = <0x07>;
>   				};
>   
>   				opp-650000000 {
>   					opp-hz = /bits/ 64 <650000000>;
>   					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
>   					opp-peak-kBps = <7216000>;
> +					opp-supported-hw = <0x07>;
>   				};
>   
>   				opp-565000000 {
>   					opp-hz = /bits/ 64 <565000000>;
>   					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
>   					opp-peak-kBps = <5412000>;
> +					opp-supported-hw = <0x07>;
>   				};
>   
>   				opp-430000000 {
>   					opp-hz = /bits/ 64 <430000000>;
>   					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
>   					opp-peak-kBps = <5412000>;
> +					opp-supported-hw = <0x07>;
>   				};
>   
>   				opp-355000000 {
>   					opp-hz = /bits/ 64 <355000000>;
>   					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
>   					opp-peak-kBps = <3072000>;
> +					opp-supported-hw = <0x07>;
>   				};
>   
>   				opp-267000000 {
>   					opp-hz = /bits/ 64 <267000000>;
>   					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
>   					opp-peak-kBps = <3072000>;
> +					opp-supported-hw = <0x07>;
>   				};
>   
>   				opp-180000000 {
>   					opp-hz = /bits/ 64 <180000000>;
>   					opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
>   					opp-peak-kBps = <1804000>;
> +					opp-supported-hw = <0x07>;
>   				};
>   			};
>   		};
> 

A gentle ping.

-Akhil.


^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH v3 1/2] drm/msm: Add speed-bin support to a618 gpu
  2020-12-07 10:42 [PATCH v3 1/2] drm/msm: Add speed-bin support to a618 gpu Akhil P Oommen
  2020-12-07 10:42 ` [PATCH v3 2/2] arm: dts: sc7180: Add support for gpu fuse Akhil P Oommen
  2020-12-11 11:54 ` [PATCH v3 1/2] drm/msm: Add speed-bin support to a618 gpu Akhil P Oommen
@ 2021-01-04 18:07 ` Jordan Crouse
  2 siblings, 0 replies; 5+ messages in thread
From: Jordan Crouse @ 2021-01-04 18:07 UTC (permalink / raw)
  To: Akhil P Oommen
  Cc: freedreno, devicetree, robh, dri-devel, linux-arm-msm,
	linux-kernel, mka, robdclark, dianders

On Mon, Dec 07, 2020 at 04:12:07PM +0530, Akhil P Oommen wrote:
> Some GPUs support different max frequencies depending on the platform.
> To identify the correct variant, we should check the gpu speedbin
> fuse value. Add support for this speedbin detection to a6xx family
> along with the required fuse details for a618 gpu.
> 
> Signed-off-by: Akhil P Oommen <akhilpo@codeaurora.org>
> ---
> Changes from v2:
> 	1. Made the changes a6xx specific to save space.
> Changes from v1:
> 	1. Added the changes to support a618 sku to the series.
> 	2. Avoid failing probe in case of an unsupported sku. (Rob)
> 
>  drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 74 +++++++++++++++++++++++++++++++++++
>  drivers/gpu/drm/msm/adreno/a6xx_gpu.h |  2 +
>  2 files changed, 76 insertions(+)
> 
> diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
> index 1306618..6304578 100644
> --- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
> +++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c
> @@ -10,10 +10,13 @@
>  
>  #include <linux/bitfield.h>
>  #include <linux/devfreq.h>
> +#include <linux/nvmem-consumer.h>
>  #include <linux/soc/qcom/llcc-qcom.h>
>  
>  #define GPU_PAS_ID 13
>  
> +const u32 a618_speedbins[] = {0, 169, 174};

This still feels too generic to me - this could easily be something like:

static u32 a618_get_speed_bin(int rev)
{
	if (rev == 0)
		return 0;
	else if (rev == 169)
		return 1;
	else if (rev == 174)
		return 2;
	
	return UINT_MAX;
}

I know Akhil can see a future where there might be other "pro" targets but it is
unclear to me when those will see upstream support and even if they do a
handful of inline-able functions still seem better to me than a group of const
arrays.

> +
>  static inline bool _a6xx_check_idle(struct msm_gpu *gpu)
>  {
>  	struct adreno_gpu *adreno_gpu = to_adreno_gpu(gpu);
> @@ -1208,6 +1211,10 @@ static void a6xx_destroy(struct msm_gpu *gpu)
>  	a6xx_gmu_remove(a6xx_gpu);
>  
>  	adreno_gpu_cleanup(adreno_gpu);
> +
> +	if (a6xx_gpu->opp_table)
> +		dev_pm_opp_put_supported_hw(a6xx_gpu->opp_table);
> +
>  	kfree(a6xx_gpu);
>  }
>  
> @@ -1264,6 +1271,67 @@ static uint32_t a6xx_get_rptr(struct msm_gpu *gpu, struct msm_ringbuffer *ring)
>  	return ring->memptrs->rptr = gpu_read(gpu, REG_A6XX_CP_RB_RPTR);
>  }
>  
> +static u32 fuse_to_supp_hw(struct device *dev, u32 revn, u32 fuse)
> +{
> +	int i;
> +
> +	if (revn == 618) {
> +		for (i = 0; i < ARRAY_SIZE(a618_speedbins); i++) {
> +			if (fuse == a618_speedbins[i])
> +				return  (1 << i);
> +		}
> +	}

u32 val = UINT_MAX;

if (revn == 618)
	val = a618_get_speed_bin(fuse);

if (val == UINT_MAX)
	DRM_DEV_ERROR(dev, "Missing support for speed-bin %u. Some OPPs may not
	be supported by hardware", fuse);

return val;

> +
> +	DRM_DEV_ERROR(dev,
> +			"missing support for speed-bin: %u. Some OPPs may not be supported by hardware",
> +			fuse);
> +	return ~0U;
> +}
> +
> +static int a6xx_set_supported_hw(struct device *dev, struct a6xx_gpu *a6xx_gpu,
> +		u32 revn)
> +{
> +
> +	struct opp_table *opp_table;
> +	struct nvmem_cell *cell;
> +	u32 supp_hw = ~0U;
> +	void *buf;
> +
> +	cell = nvmem_cell_get(dev, "speed_bin");
> +	/*
> +	 * -ENOENT means that the platform doesn't support speedbin which is
> +	 * fine
> +	 */
> +	if (PTR_ERR(cell) == -ENOENT)
> +		return 0;
> +	else if (IS_ERR(cell)) {
> +		DRM_DEV_ERROR(dev,
> +				"failed to read speed-bin. Some OPPs may not be supported by hardware");
> +		goto done;
> +	}
> +
> +	buf = nvmem_cell_read(cell, NULL);
> +	if (IS_ERR(buf)) {
> +		nvmem_cell_put(cell);
> +		DRM_DEV_ERROR(dev,
> +				"failed to read speed-bin. Some OPPs may not be supported by hardware");
> +		goto done;
> +	}
> +
> +	supp_hw = fuse_to_supp_hw(dev, revn, *((u32 *) buf));
> +
> +	kfree(buf);
> +	nvmem_cell_put(cell);
> +
> +done:
> +	opp_table = dev_pm_opp_set_supported_hw(dev, &supp_hw, 1);
> +	if (IS_ERR(opp_table))
> +		return PTR_ERR(opp_table);
> +
> +	a6xx_gpu->opp_table = opp_table;
> +	return 0;
> +}

Beyond the comments above, I think the rest of this is reasonable.

Jordan

> +
>  static const struct adreno_gpu_funcs funcs = {
>  	.base = {
>  		.get_param = adreno_get_param,
> @@ -1325,6 +1393,12 @@ struct msm_gpu *a6xx_gpu_init(struct drm_device *dev)
>  
>  	a6xx_llc_slices_init(pdev, a6xx_gpu);
>  
> +	ret = a6xx_set_supported_hw(&pdev->dev, a6xx_gpu, info->revn);
> +	if (ret) {
> +		a6xx_destroy(&(a6xx_gpu->base.base));
> +		return ERR_PTR(ret);
> +	}
> +
>  	ret = adreno_gpu_init(dev, pdev, adreno_gpu, &funcs, 1);
>  	if (ret) {
>  		a6xx_destroy(&(a6xx_gpu->base.base));
> diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.h b/drivers/gpu/drm/msm/adreno/a6xx_gpu.h
> index e793d32..ce0610c 100644
> --- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.h
> +++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.h
> @@ -33,6 +33,8 @@ struct a6xx_gpu {
>  	void *llc_slice;
>  	void *htw_llc_slice;
>  	bool have_mmu500;
> +
> +	struct opp_table *opp_table;
>  };
>  
>  #define to_a6xx_gpu(x) container_of(x, struct a6xx_gpu, base)
> -- 
> 2.7.4
> 

-- 
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2021-01-04 18:08 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-12-07 10:42 [PATCH v3 1/2] drm/msm: Add speed-bin support to a618 gpu Akhil P Oommen
2020-12-07 10:42 ` [PATCH v3 2/2] arm: dts: sc7180: Add support for gpu fuse Akhil P Oommen
2020-12-11 11:55   ` Akhil P Oommen
2020-12-11 11:54 ` [PATCH v3 1/2] drm/msm: Add speed-bin support to a618 gpu Akhil P Oommen
2021-01-04 18:07 ` Jordan Crouse

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).