* [PATCH 0/2] Add a new board device tree named 'evoker' for herobrine variant.
@ 2022-09-01 6:13 Sheng-Liang Pan
2022-09-01 6:13 ` [PATCH 1/2] arm64: dts: qcom: sc7280: Add device tree for herobrine evoker Sheng-Liang Pan
2022-09-01 6:13 ` [PATCH 2/2] dt-bindings: arm: qcom: document sc7280 and evoker board Sheng-Liang Pan
0 siblings, 2 replies; 7+ messages in thread
From: Sheng-Liang Pan @ 2022-09-01 6:13 UTC (permalink / raw)
To: LKML
Cc: mka, dianders, Sheng-Liang Pan, Andy Gross, Bjorn Andersson,
Konrad Dybcio, Krzysztof Kozlowski, Rob Herring, devicetree,
linux-arm-msm
This patch add the initial dts file for new board 'evoker'.
Sheng-Liang Pan (2):
arm64: dts: qcom: sc7280: Add device tree for herobrine evoker
dt-bindings: arm: qcom: document sc7280 and evoker board
.../devicetree/bindings/arm/qcom.yaml | 5 +
arch/arm64/boot/dts/qcom/Makefile | 1 +
.../dts/qcom/sc7280-herobrine-evoker-r0.dts | 333 ++++++++++++++++++
3 files changed, 339 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-r0.dts
--
2.34.1
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH 1/2] arm64: dts: qcom: sc7280: Add device tree for herobrine evoker
2022-09-01 6:13 [PATCH 0/2] Add a new board device tree named 'evoker' for herobrine variant Sheng-Liang Pan
@ 2022-09-01 6:13 ` Sheng-Liang Pan
2022-09-01 7:59 ` Krzysztof Kozlowski
2022-09-01 6:13 ` [PATCH 2/2] dt-bindings: arm: qcom: document sc7280 and evoker board Sheng-Liang Pan
1 sibling, 1 reply; 7+ messages in thread
From: Sheng-Liang Pan @ 2022-09-01 6:13 UTC (permalink / raw)
To: LKML
Cc: mka, dianders, Sheng-Liang Pan, Andy Gross, Bjorn Andersson,
Konrad Dybcio, Krzysztof Kozlowski, Rob Herring, devicetree,
linux-arm-msm
Add a basic device tree for the herobrine evoker board.
Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
.../dts/qcom/sc7280-herobrine-evoker-r0.dts | 333 ++++++++++++++++++
2 files changed, 334 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-r0.dts
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 1d86a33de528c..dd18ae8cd81c2 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -101,6 +101,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1-lte.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-crd.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-evoker-r0.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-herobrine-r1.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r0.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp.dtb
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-r0.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-r0.dts
new file mode 100644
index 0000000000000..ccbe50b6249ab
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker-r0.dts
@@ -0,0 +1,333 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Evoker board device tree source
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7280-herobrine.dtsi"
+
+/ {
+ model = "Google Evoker";
+ compatible = "google,evoker", "qcom,sc7280";
+};
+
+/*
+ * ADDITIONS TO FIXED REGULATORS DEFINED IN PARENT DEVICE TREE FILES
+ *
+ * Sort order matches the order in the parent files (parents before children).
+ */
+
+&pp3300_codec {
+ status = "okay";
+};
+
+/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */
+
+ap_tp_i2c: &i2c0 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ trackpad: trackpad@2c {
+ compatible = "hid-over-i2c";
+ reg = <0x2c>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&tp_int_odl>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+
+ hid-descr-addr = <0x20>;
+ vcc-supply = <&pp3300_z1>;
+
+ wakeup-source;
+ };
+};
+
+ts_i2c: &i2c13 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ ap_ts: touchscreen@10 {
+ compatible = "elan,ekth6915";
+ reg = <0x10>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ts_int_conn>, <&ts_rst_conn>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <55 IRQ_TYPE_LEVEL_LOW>;
+
+ reset-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>;
+
+ vcc33-supply = <&ts_avdd>;
+ };
+};
+
+&ap_sar_sensor_i2c {
+ status = "okay";
+};
+
+&ap_sar_sensor0 {
+ status = "okay";
+};
+
+&ap_sar_sensor1 {
+ status = "okay";
+};
+
+&mdss_edp {
+ status = "okay";
+};
+
+&mdss_edp_phy {
+ status = "okay";
+};
+
+/* For nvme */
+&pcie1 {
+ status = "okay";
+};
+
+/* For nvme */
+&pcie1_phy {
+ status = "okay";
+};
+
+&pwmleds {
+ status = "okay";
+};
+
+/* For eMMC */
+&sdhc_1 {
+ status = "okay";
+};
+
+/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */
+
+&ts_rst_conn {
+ bias-disable;
+};
+
+/* PINCTRL - BOARD-SPECIFIC */
+
+/*
+ * Methodology for gpio-line-names:
+ * - If a pin goes to herobrine board and is named it gets that name.
+ * - If a pin goes to herobrine board and is not named, it gets no name.
+ * - If a pin is totally internal to Qcard then it gets Qcard name.
+ * - If a pin is not hooked up on Qcard, it gets no name.
+ */
+
+&pm8350c_gpios {
+ gpio-line-names = "FLASH_STROBE_1", /* 1 */
+ "AP_SUSPEND",
+ "PM8008_1_RST_N",
+ "",
+ "",
+ "",
+ "PMIC_EDP_BL_EN",
+ "PMIC_EDP_BL_PWM",
+ "";
+};
+
+&tlmm {
+ gpio-line-names = "AP_TP_I2C_SDA", /* 0 */
+ "AP_TP_I2C_SCL",
+ "SSD_RST_L",
+ "PE_WAKE_ODL",
+ "AP_SAR_SDA",
+ "AP_SAR_SCL",
+ "PRB_SC_GPIO_6",
+ "TP_INT_ODL",
+ "HP_I2C_SDA",
+ "HP_I2C_SCL",
+
+ "GNSS_L1_EN", /* 10 */
+ "GNSS_L5_EN",
+ "SPI_AP_MOSI",
+ "SPI_AP_MISO",
+ "SPI_AP_CLK",
+ "SPI_AP_CS0_L",
+ /*
+ * AP_FLASH_WP is crossystem ABI. Schematics
+ * call it BIOS_FLASH_WP_OD.
+ */
+ "AP_FLASH_WP",
+ "",
+ "AP_EC_INT_L",
+ "",
+
+ "UF_CAM_RST_L", /* 20 */
+ "WF_CAM_RST_L",
+ "UART_AP_TX_DBG_RX",
+ "UART_DBG_TX_AP_RX",
+ "",
+ "PM8008_IRQ_1",
+ "HOST2WLAN_SOL",
+ "WLAN2HOST_SOL",
+ "MOS_BT_UART_CTS",
+ "MOS_BT_UART_RFR",
+
+ "MOS_BT_UART_TX", /* 30 */
+ "MOS_BT_UART_RX",
+ "PRB_SC_GPIO_32",
+ "HUB_RST_L",
+ "",
+ "",
+ "AP_SPI_FP_MISO",
+ "AP_SPI_FP_MOSI",
+ "AP_SPI_FP_CLK",
+ "AP_SPI_FP_CS_L",
+
+ "AP_EC_SPI_MISO", /* 40 */
+ "AP_EC_SPI_MOSI",
+ "AP_EC_SPI_CLK",
+ "AP_EC_SPI_CS_L",
+ "LCM_RST_L",
+ "EARLY_EUD_N",
+ "",
+ "DP_HOT_PLUG_DET",
+ "IO_BRD_MLB_ID0",
+ "IO_BRD_MLB_ID1",
+
+ "IO_BRD_MLB_ID2", /* 50 */
+ "SSD_EN",
+ "TS_I2C_SDA_CONN",
+ "TS_I2C_CLK_CONN",
+ "TS_RST_CONN",
+ "TS_INT_CONN",
+ "AP_I2C_TPM_SDA",
+ "AP_I2C_TPM_SCL",
+ "PRB_SC_GPIO_58",
+ "PRB_SC_GPIO_59",
+
+ "EDP_HOT_PLUG_DET_N", /* 60 */
+ "FP_TO_AP_IRQ_L",
+ "",
+ "AMP_EN",
+ "CAM0_MCLK_GPIO_64",
+ "CAM1_MCLK_GPIO_65",
+ "WF_CAM_MCLK",
+ "PRB_SC_GPIO_67",
+ "FPMCU_BOOT0",
+ "UF_CAM_SDA",
+
+ "UF_CAM_SCL", /* 70 */
+ "",
+ "",
+ "WF_CAM_SDA",
+ "WF_CAM_SCL",
+ "",
+ "",
+ "EN_FP_RAILS",
+ "FP_RST_L",
+ "PCIE1_CLKREQ_ODL",
+
+ "EN_PP3300_DX_EDP", /* 80 */
+ "SC_GPIO_81",
+ "FORCED_USB_BOOT",
+ "WCD_RESET_N",
+ "MOS_WLAN_EN",
+ "MOS_BT_EN",
+ "MOS_SW_CTRL",
+ "MOS_PCIE0_RST",
+ "MOS_PCIE0_CLKREQ_N",
+ "MOS_PCIE0_WAKE_N",
+
+ "MOS_LAA_AS_EN", /* 90 */
+ "SD_CD_ODL",
+ "",
+ "",
+ "MOS_BT_WLAN_SLIMBUS_CLK",
+ "MOS_BT_WLAN_SLIMBUS_DAT0",
+ "HP_MCLK",
+ "HP_BCLK",
+ "HP_DOUT",
+ "HP_DIN",
+
+ "HP_LRCLK", /* 100 */
+ "HP_IRQ",
+ "",
+ "",
+ "GSC_AP_INT_ODL",
+ "EN_PP3300_CODEC",
+ "AMP_BCLK",
+ "AMP_DIN",
+ "AMP_LRCLK",
+ "UIM1_DATA_GPIO_109",
+
+ "UIM1_CLK_GPIO_110", /* 110 */
+ "UIM1_RESET_GPIO_111",
+ "PRB_SC_GPIO_112",
+ "UIM0_DATA",
+ "UIM0_CLK",
+ "UIM0_RST",
+ "UIM0_PRESENT_ODL",
+ "SDM_RFFE0_CLK",
+ "SDM_RFFE0_DATA",
+ "WF_CAM_EN",
+
+ "FASTBOOT_SEL_0", /* 120 */
+ "SC_GPIO_121",
+ "FASTBOOT_SEL_1",
+ "SC_GPIO_123",
+ "FASTBOOT_SEL_2",
+ "SM_RFFE4_CLK_GRFC_8",
+ "SM_RFFE4_DATA_GRFC_9",
+ "WLAN_COEX_UART1_RX",
+ "WLAN_COEX_UART1_TX",
+ "PRB_SC_GPIO_129",
+
+ "LCM_ID0", /* 130 */
+ "LCM_ID1",
+ "",
+ "SDR_QLINK_REQ",
+ "SDR_QLINK_EN",
+ "QLINK0_WMSS_RESET_N",
+ "SMR526_QLINK1_REQ",
+ "SMR526_QLINK1_EN",
+ "SMR526_QLINK1_WMSS_RESET_N",
+ "PRB_SC_GPIO_139",
+
+ "SAR1_IRQ_ODL", /* 140 */
+ "SAR0_IRQ_ODL",
+ "PRB_SC_GPIO_142",
+ "",
+ "WCD_SWR_TX_CLK",
+ "WCD_SWR_TX_DATA0",
+ "WCD_SWR_TX_DATA1",
+ "WCD_SWR_RX_CLK",
+ "WCD_SWR_RX_DATA0",
+ "WCD_SWR_RX_DATA1",
+
+ "DMIC01_CLK", /* 150 */
+ "DMIC01_DATA",
+ "DMIC23_CLK",
+ "DMIC23_DATA",
+ "",
+ "",
+ "EC_IN_RW_ODL",
+ "HUB_EN",
+ "WCD_SWR_TX_DATA2",
+ "",
+
+ "", /* 160 */
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+ "",
+
+ "", /* 170 */
+ "MOS_BLE_UART_TX",
+ "MOS_BLE_UART_RX",
+ "",
+ "",
+ "";
+};
--
2.34.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH 2/2] dt-bindings: arm: qcom: document sc7280 and evoker board
2022-09-01 6:13 [PATCH 0/2] Add a new board device tree named 'evoker' for herobrine variant Sheng-Liang Pan
2022-09-01 6:13 ` [PATCH 1/2] arm64: dts: qcom: sc7280: Add device tree for herobrine evoker Sheng-Liang Pan
@ 2022-09-01 6:13 ` Sheng-Liang Pan
2022-09-01 7:58 ` Krzysztof Kozlowski
1 sibling, 1 reply; 7+ messages in thread
From: Sheng-Liang Pan @ 2022-09-01 6:13 UTC (permalink / raw)
To: LKML
Cc: mka, dianders, Sheng-Liang Pan, Andy Gross, Bjorn Andersson,
Konrad Dybcio, Krzysztof Kozlowski, Rob Herring, devicetree,
linux-arm-msm
This adds Chromebook Evoker to the yaml.
Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com>
---
Documentation/devicetree/bindings/arm/qcom.yaml | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index fb1d00bcc847c..d4b2d947859d4 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -565,6 +565,11 @@ properties:
- const: google,piglin
- const: qcom,sc7280
+ - description: Google Evoker (newest rev)
+ items:
+ - const: google,evoker
+ - const: qcom,sc7280
+
- description: Google Herobrine (newest rev)
items:
- const: google,herobrine
--
2.34.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH 2/2] dt-bindings: arm: qcom: document sc7280 and evoker board
2022-09-01 6:13 ` [PATCH 2/2] dt-bindings: arm: qcom: document sc7280 and evoker board Sheng-Liang Pan
@ 2022-09-01 7:58 ` Krzysztof Kozlowski
0 siblings, 0 replies; 7+ messages in thread
From: Krzysztof Kozlowski @ 2022-09-01 7:58 UTC (permalink / raw)
To: Sheng-Liang Pan, LKML
Cc: mka, dianders, Andy Gross, Bjorn Andersson, Konrad Dybcio,
Krzysztof Kozlowski, Rob Herring, devicetree, linux-arm-msm
On 01/09/2022 09:13, Sheng-Liang Pan wrote:
> This adds Chromebook Evoker to the yaml.
>
> Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com>
> ---
I think I saw this patch, but this is still v1?
Where is the changelog and numbering?
Before any posting please read carefully:
https://elixir.bootlin.com/linux/v5.17/source/Documentation/process/submitting-patches.rst
This is another set of poor submissions from Google Partners :(
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH 1/2] arm64: dts: qcom: sc7280: Add device tree for herobrine evoker
2022-09-01 6:13 ` [PATCH 1/2] arm64: dts: qcom: sc7280: Add device tree for herobrine evoker Sheng-Liang Pan
@ 2022-09-01 7:59 ` Krzysztof Kozlowski
0 siblings, 0 replies; 7+ messages in thread
From: Krzysztof Kozlowski @ 2022-09-01 7:59 UTC (permalink / raw)
To: Sheng-Liang Pan, LKML
Cc: mka, dianders, Andy Gross, Bjorn Andersson, Konrad Dybcio,
Krzysztof Kozlowski, Rob Herring, devicetree, linux-arm-msm
On 01/09/2022 09:13, Sheng-Liang Pan wrote:
> Add a basic device tree for the herobrine evoker board.
>
> Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com>
I am pretty sure I saw it... Where is the changelog and versioning?
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH 2/2] dt-bindings: arm: qcom: document sc7280 and evoker board
2022-09-01 9:12 ` [PATCH 2/2] dt-bindings: arm: qcom: document sc7280 and evoker board Sheng-Liang Pan
@ 2022-09-01 10:03 ` Krzysztof Kozlowski
0 siblings, 0 replies; 7+ messages in thread
From: Krzysztof Kozlowski @ 2022-09-01 10:03 UTC (permalink / raw)
To: Sheng-Liang Pan, LKML
Cc: mka, dianders, Andy Gross, Bjorn Andersson, Konrad Dybcio,
Krzysztof Kozlowski, Rob Herring, devicetree, linux-arm-msm
On 01/09/2022 12:12, Sheng-Liang Pan wrote:
> This adds Chromebook Evoker to the yaml.
>
> Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com>
Read the docs I already sent you. Do not use "This commit/patch".
https://elixir.bootlin.com/linux/v5.17.1/source/Documentation/process/submitting-patches.rst#L95
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH 2/2] dt-bindings: arm: qcom: document sc7280 and evoker board
2022-09-01 9:12 [PATCH 0/2] Add a new board device tree named 'evoker' for herobrine variant Sheng-Liang Pan
@ 2022-09-01 9:12 ` Sheng-Liang Pan
2022-09-01 10:03 ` Krzysztof Kozlowski
0 siblings, 1 reply; 7+ messages in thread
From: Sheng-Liang Pan @ 2022-09-01 9:12 UTC (permalink / raw)
To: LKML
Cc: mka, dianders, Sheng-Liang Pan, Andy Gross, Bjorn Andersson,
Konrad Dybcio, Krzysztof Kozlowski, Rob Herring, devicetree,
linux-arm-msm
This adds Chromebook Evoker to the yaml.
Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com>
---
Documentation/devicetree/bindings/arm/qcom.yaml | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index fb1d00bcc847c..d4b2d947859d4 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -565,6 +565,11 @@ properties:
- const: google,piglin
- const: qcom,sc7280
+ - description: Google Evoker (newest rev)
+ items:
+ - const: google,evoker
+ - const: qcom,sc7280
+
- description: Google Herobrine (newest rev)
items:
- const: google,herobrine
--
2.34.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
end of thread, other threads:[~2022-09-01 10:03 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-09-01 6:13 [PATCH 0/2] Add a new board device tree named 'evoker' for herobrine variant Sheng-Liang Pan
2022-09-01 6:13 ` [PATCH 1/2] arm64: dts: qcom: sc7280: Add device tree for herobrine evoker Sheng-Liang Pan
2022-09-01 7:59 ` Krzysztof Kozlowski
2022-09-01 6:13 ` [PATCH 2/2] dt-bindings: arm: qcom: document sc7280 and evoker board Sheng-Liang Pan
2022-09-01 7:58 ` Krzysztof Kozlowski
2022-09-01 9:12 [PATCH 0/2] Add a new board device tree named 'evoker' for herobrine variant Sheng-Liang Pan
2022-09-01 9:12 ` [PATCH 2/2] dt-bindings: arm: qcom: document sc7280 and evoker board Sheng-Liang Pan
2022-09-01 10:03 ` Krzysztof Kozlowski
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).