linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Christophe Leroy <christophe.leroy@csgroup.eu>
To: "Naveen N . Rao" <naveen.n.rao@linux.vnet.ibm.com>,
	Steven Rostedt <rostedt@goodmis.org>,
	Ingo Molnar <mingo@redhat.com>,
	Benjamin Herrenschmidt <benh@kernel.crashing.org>,
	Paul Mackerras <paulus@samba.org>,
	Michael Ellerman <mpe@ellerman.id.au>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>,
	linux-kernel@vger.kernel.org, linuxppc-dev@lists.ozlabs.org
Subject: [PATCH v1 08/22] powerpc/ftrace: Make __ftrace_make_{nop/call}() common to PPC32 and PPC64
Date: Thu, 24 Mar 2022 15:29:58 +0100	[thread overview]
Message-ID: <fb60b19f154db8132a00c2df7aca7db3e85603b5.1648131740.git.christophe.leroy@csgroup.eu> (raw)
In-Reply-To: <cover.1648131740.git.christophe.leroy@csgroup.eu>

Since c93d4f6ecf4b ("powerpc/ftrace: Add module_trampoline_target()
for PPC32"), __ftrace_make_nop() for PPC32 is very similar to the
one for PPC64.

Same for __ftrace_make_call().

Make them common.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
 arch/powerpc/kernel/trace/ftrace.c | 108 +++--------------------------
 1 file changed, 8 insertions(+), 100 deletions(-)

diff --git a/arch/powerpc/kernel/trace/ftrace.c b/arch/powerpc/kernel/trace/ftrace.c
index 1b05d33f96c6..2c7e42e439bb 100644
--- a/arch/powerpc/kernel/trace/ftrace.c
+++ b/arch/powerpc/kernel/trace/ftrace.c
@@ -114,7 +114,6 @@ static unsigned long find_bl_target(unsigned long ip, ppc_inst_t op)
 }
 
 #ifdef CONFIG_MODULES
-#ifdef CONFIG_PPC64
 static int
 __ftrace_make_nop(struct module *mod,
 		  struct dyn_ftrace *rec, unsigned long addr)
@@ -154,10 +153,11 @@ __ftrace_make_nop(struct module *mod,
 		return -EINVAL;
 	}
 
-#ifdef CONFIG_MPROFILE_KERNEL
-	/* When using -mkernel_profile there is no load to jump over */
+	/* When using -mkernel_profile or PPC32 there is no load to jump over */
 	pop = ppc_inst(PPC_RAW_NOP());
 
+#ifdef CONFIG_PPC64
+#ifdef CONFIG_MPROFILE_KERNEL
 	if (copy_inst_from_kernel_nofault(&op, (void *)(ip - 4))) {
 		pr_err("Fetching instruction at %lx failed.\n", ip - 4);
 		return -EFAULT;
@@ -201,6 +201,7 @@ __ftrace_make_nop(struct module *mod,
 		return -EINVAL;
 	}
 #endif /* CONFIG_MPROFILE_KERNEL */
+#endif /* PPC64 */
 
 	if (patch_instruction((u32 *)ip, pop)) {
 		pr_err("Patching NOP failed.\n");
@@ -209,48 +210,6 @@ __ftrace_make_nop(struct module *mod,
 
 	return 0;
 }
-
-#else /* !PPC64 */
-static int
-__ftrace_make_nop(struct module *mod,
-		  struct dyn_ftrace *rec, unsigned long addr)
-{
-	ppc_inst_t op;
-	unsigned long ip = rec->ip;
-	unsigned long tramp, ptr;
-
-	if (copy_from_kernel_nofault(&op, (void *)ip, MCOUNT_INSN_SIZE))
-		return -EFAULT;
-
-	/* Make sure that that this is still a 24bit jump */
-	if (!is_bl_op(op)) {
-		pr_err("Not expected bl: opcode is %s\n", ppc_inst_as_str(op));
-		return -EINVAL;
-	}
-
-	/* lets find where the pointer goes */
-	tramp = find_bl_target(ip, op);
-
-	/* Find where the trampoline jumps to */
-	if (module_trampoline_target(mod, tramp, &ptr)) {
-		pr_err("Failed to get trampoline target\n");
-		return -EFAULT;
-	}
-
-	if (ptr != addr) {
-		pr_err("Trampoline location %08lx does not match addr\n",
-		       tramp);
-		return -EINVAL;
-	}
-
-	op = ppc_inst(PPC_RAW_NOP());
-
-	if (patch_instruction((u32 *)ip, op))
-		return -EPERM;
-
-	return 0;
-}
-#endif /* PPC64 */
 #endif /* CONFIG_MODULES */
 
 static unsigned long find_ftrace_tramp(unsigned long ip)
@@ -437,13 +396,12 @@ int ftrace_make_nop(struct module *mod,
 }
 
 #ifdef CONFIG_MODULES
-#ifdef CONFIG_PPC64
 /*
  * Examine the existing instructions for __ftrace_make_call.
  * They should effectively be a NOP, and follow formal constraints,
  * depending on the ABI. Return false if they don't.
  */
-#ifndef CONFIG_MPROFILE_KERNEL
+#ifndef CONFIG_DYNAMIC_FTRACE_WITH_REGS
 static int
 expected_nop_sequence(void *ip, ppc_inst_t op0, ppc_inst_t op1)
 {
@@ -465,7 +423,7 @@ expected_nop_sequence(void *ip, ppc_inst_t op0, ppc_inst_t op1)
 static int
 expected_nop_sequence(void *ip, ppc_inst_t op0, ppc_inst_t op1)
 {
-	/* look for patched "NOP" on ppc64 with -mprofile-kernel */
+	/* look for patched "NOP" on ppc64 with -mprofile-kernel or ppc32 */
 	if (!ppc_inst_equal(op0, ppc_inst(PPC_RAW_NOP())))
 		return 0;
 	return 1;
@@ -484,8 +442,10 @@ __ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
 	if (copy_inst_from_kernel_nofault(op, ip))
 		return -EFAULT;
 
+#ifndef CONFIG_DYNAMIC_FTRACE_WITH_REGS
 	if (copy_inst_from_kernel_nofault(op + 1, ip + 4))
 		return -EFAULT;
+#endif
 
 	if (!expected_nop_sequence(ip, op[0], op[1])) {
 		pr_err("Unexpected call sequence at %p: %s %s\n",
@@ -531,58 +491,6 @@ __ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
 
 	return 0;
 }
-
-#else  /* !CONFIG_PPC64: */
-static int
-__ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
-{
-	int err;
-	ppc_inst_t op;
-	u32 *ip = (u32 *)rec->ip;
-	struct module *mod = rec->arch.mod;
-	unsigned long tramp;
-
-	/* read where this goes */
-	if (copy_inst_from_kernel_nofault(&op, ip))
-		return -EFAULT;
-
-	/* It should be pointing to a nop */
-	if (!ppc_inst_equal(op,  ppc_inst(PPC_RAW_NOP()))) {
-		pr_err("Expected NOP but have %s\n", ppc_inst_as_str(op));
-		return -EINVAL;
-	}
-
-	/* If we never set up a trampoline to ftrace_caller, then bail */
-#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
-	if (!mod->arch.tramp || !mod->arch.tramp_regs) {
-#else
-	if (!mod->arch.tramp) {
-#endif
-		pr_err("No ftrace trampoline\n");
-		return -EINVAL;
-	}
-
-#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
-	if (rec->flags & FTRACE_FL_REGS)
-		tramp = mod->arch.tramp_regs;
-	else
-#endif
-		tramp = mod->arch.tramp;
-	/* create the branch to the trampoline */
-	err = create_branch(&op, ip, tramp, BRANCH_SET_LINK);
-	if (err) {
-		pr_err("REL24 out of range!\n");
-		return -EINVAL;
-	}
-
-	pr_devel("write to %lx\n", rec->ip);
-
-	if (patch_instruction(ip, op))
-		return -EPERM;
-
-	return 0;
-}
-#endif /* CONFIG_PPC64 */
 #endif /* CONFIG_MODULES */
 
 static int __ftrace_make_call_kernel(struct dyn_ftrace *rec, unsigned long addr)
-- 
2.35.1


  parent reply	other threads:[~2022-03-24 14:33 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-03-24 14:29 [PATCH v1 00/22] powerpc: ftrace optimisation and cleanup and more [v1] Christophe Leroy
2022-03-24 14:29 ` [PATCH v1 01/22] powerpc/ftrace: Refactor prepare_ftrace_return() Christophe Leroy
2022-03-24 14:29 ` [PATCH v1 02/22] powerpc/ftrace: Remove redundant create_branch() calls Christophe Leroy
2022-03-24 14:29 ` [PATCH v1 03/22] powerpc/code-patching: Inline is_offset_in_{cond}_branch_range() Christophe Leroy
2022-03-24 14:29 ` [PATCH v1 04/22] powerpc/ftrace: Use is_offset_in_branch_range() Christophe Leroy
2022-03-24 14:29 ` [PATCH v1 05/22] powerpc/code-patching: Inline create_branch() Christophe Leroy
2022-03-24 14:29 ` [PATCH v1 06/22] powerpc/ftrace: Inline ftrace_modify_code() Christophe Leroy
2022-04-18  6:07   ` Naveen N. Rao
2022-04-22  9:12     ` Michael Ellerman
2022-05-04 11:43     ` Christophe Leroy
2022-03-24 14:29 ` [PATCH v1 07/22] powerpc/ftrace: Use patch_instruction() return directly Christophe Leroy
2022-04-18  6:21   ` Naveen N. Rao
2022-04-18 19:44     ` Steven Rostedt
2022-05-04 12:01       ` Christophe Leroy
2022-03-24 14:29 ` Christophe Leroy [this message]
2022-04-18  6:40   ` [PATCH v1 08/22] powerpc/ftrace: Make __ftrace_make_{nop/call}() common to PPC32 and PPC64 Naveen N. Rao
2022-05-04 12:19     ` Christophe Leroy
2022-05-06 11:41     ` Christophe Leroy
2022-03-24 14:29 ` [PATCH v1 09/22] powerpc/ftrace: Don't include ftrace.o for CONFIG_FTRACE_SYSCALLS Christophe Leroy
2022-03-24 14:30 ` [PATCH v1 10/22] powerpc/ftrace: Use CONFIG_FUNCTION_TRACER instead of CONFIG_DYNAMIC_FTRACE Christophe Leroy
2022-04-18  7:00   ` Naveen N. Rao
2022-05-06 11:41     ` Christophe Leroy
2022-03-24 14:30 ` [PATCH v1 11/22] powerpc/ftrace: Remove ftrace_plt_tramps[] Christophe Leroy
2022-03-24 14:30 ` [PATCH v1 12/22] powerpc/ftrace: Use BRANCH_SET_LINK instead of value 1 Christophe Leroy
2022-03-24 14:30 ` [PATCH v1 13/22] powerpc/ftrace: Use PPC_RAW_xxx() macros instead of opencoding Christophe Leroy
2022-04-18  7:38   ` Naveen N. Rao
2022-05-04 12:39     ` Christophe Leroy
2022-05-05 16:47       ` Christophe Leroy
2022-03-24 14:30 ` [PATCH v1 14/22] powerpc/ftrace: Use size macro " Christophe Leroy
2022-03-24 14:30 ` [PATCH v1 15/22] powerpc/ftrace: Simplify expected_nop_sequence() Christophe Leroy
2022-03-24 14:30 ` [PATCH v1 16/22] powerpc/ftrace: Minimise number of #ifdefs Christophe Leroy
2022-04-18  7:59   ` Naveen N. Rao
2022-05-04 12:44     ` Christophe Leroy
2022-03-24 14:30 ` [PATCH v1 17/22] powerpc/inst: Add __copy_inst_from_kernel_nofault() Christophe Leroy
2022-03-24 14:30 ` [PATCH v1 18/22] powerpc/ftrace: Don't use copy_from_kernel_nofault() in module_trampoline_target() Christophe Leroy
2022-03-24 14:30 ` [PATCH v1 19/22] powerpc/inst: Remove PPC_INST_BRANCH Christophe Leroy
2022-03-24 14:30 ` [PATCH v1 20/22] powerpc/modules: Use PPC_INST_BRANCH_MASK instead of opencoding Christophe Leroy
2022-03-24 14:30 ` [PATCH v1 21/22] powerpc/inst: Remove PPC_INST_BL Christophe Leroy
2022-03-24 14:30 ` [PATCH v1 22/22] powerpc/opcodes: Remove unused PPC_INST_XXX macros Christophe Leroy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=fb60b19f154db8132a00c2df7aca7db3e85603b5.1648131740.git.christophe.leroy@csgroup.eu \
    --to=christophe.leroy@csgroup.eu \
    --cc=benh@kernel.crashing.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=mingo@redhat.com \
    --cc=mpe@ellerman.id.au \
    --cc=naveen.n.rao@linux.vnet.ibm.com \
    --cc=paulus@samba.org \
    --cc=rostedt@goodmis.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).