linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
To: matti.vaittinen@fi.rohmeurope.com, mazziesaccount@gmail.com
Cc: Lee Jones <lee.jones@linaro.org>,
	Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>,
	Linus Walleij <linus.walleij@linaro.org>,
	Alessandro Zummo <a.zummo@towertech.it>,
	Alexandre Belloni <alexandre.belloni@bootlin.com>,
	linux-kernel@vger.kernel.org, linux-power@fi.rohmeurope.com,
	linux-rtc@vger.kernel.org
Subject: [PATCH 01/15] rtc: bd70528: Do not require parent data
Date: Fri, 8 Jan 2021 15:29:52 +0200	[thread overview]
Message-ID: <fc961d2730c14f634e2cda1813c0a871cbd2a7f4.1610110144.git.matti.vaittinen@fi.rohmeurope.com> (raw)
In-Reply-To: <cover.1610110144.git.matti.vaittinen@fi.rohmeurope.com>

The ROHM BD71828 and BD71815 RTC drivers only need the regmap
pointer from parent. Regmap can be obtained via dev_get_regmap()
so do not require parent to populate driver data for that.

BD70528 on the other hand requires parent data to access the
watchdog so leave the parent data for BD70528 here for now.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
---

Please note that this same change has been sent individually:
https://lore.kernel.org/lkml/20210105152350.GA3714833@localhost.localdomain/
It is present in this series only because some patches depend on it.


 drivers/rtc/rtc-bd70528.c | 67 ++++++++++++++++++---------------------
 1 file changed, 31 insertions(+), 36 deletions(-)

diff --git a/drivers/rtc/rtc-bd70528.c b/drivers/rtc/rtc-bd70528.c
index 4492b770422c..a255aac6740a 100644
--- a/drivers/rtc/rtc-bd70528.c
+++ b/drivers/rtc/rtc-bd70528.c
@@ -52,6 +52,7 @@ struct bd70528_rtc_alm {
 
 struct bd70528_rtc {
 	struct rohm_regmap_dev *parent;
+	struct regmap *regmap;
 	struct device *dev;
 	u8 reg_time_start;
 	bool has_rtc_timers;
@@ -234,9 +235,8 @@ static int bd71828_set_alarm(struct device *dev, struct rtc_wkalrm *a)
 	int ret;
 	struct bd71828_rtc_alm alm;
 	struct bd70528_rtc *r = dev_get_drvdata(dev);
-	struct rohm_regmap_dev *parent = r->parent;
 
-	ret = regmap_bulk_read(parent->regmap, BD71828_REG_RTC_ALM_START,
+	ret = regmap_bulk_read(r->regmap, BD71828_REG_RTC_ALM_START,
 			       &alm, sizeof(alm));
 	if (ret) {
 		dev_err(dev, "Failed to read alarm regs\n");
@@ -250,7 +250,7 @@ static int bd71828_set_alarm(struct device *dev, struct rtc_wkalrm *a)
 	else
 		alm.alm_mask |= BD70528_MASK_ALM_EN;
 
-	ret = regmap_bulk_write(parent->regmap, BD71828_REG_RTC_ALM_START,
+	ret = regmap_bulk_write(r->regmap, BD71828_REG_RTC_ALM_START,
 				&alm, sizeof(alm));
 	if (ret)
 		dev_err(dev, "Failed to set alarm time\n");
@@ -265,17 +265,16 @@ static int bd70528_set_alarm(struct device *dev, struct rtc_wkalrm *a)
 	struct bd70528_rtc_alm alm;
 	int ret;
 	struct bd70528_rtc *r = dev_get_drvdata(dev);
-	struct rohm_regmap_dev *parent = r->parent;
 
-	ret = regmap_bulk_read(parent->regmap, BD70528_REG_RTC_WAKE_START,
-			       &wake, sizeof(wake));
+	ret = regmap_bulk_read(r->regmap, BD70528_REG_RTC_WAKE_START, &wake,
+			       sizeof(wake));
 	if (ret) {
 		dev_err(dev, "Failed to read wake regs\n");
 		return ret;
 	}
 
-	ret = regmap_bulk_read(parent->regmap, BD70528_REG_RTC_ALM_START,
-			       &alm, sizeof(alm));
+	ret = regmap_bulk_read(r->regmap, BD70528_REG_RTC_ALM_START, &alm,
+			       sizeof(alm));
 	if (ret) {
 		dev_err(dev, "Failed to read alarm regs\n");
 		return ret;
@@ -292,15 +291,14 @@ static int bd70528_set_alarm(struct device *dev, struct rtc_wkalrm *a)
 		wake.ctrl &= ~BD70528_MASK_WAKE_EN;
 	}
 
-	ret = regmap_bulk_write(parent->regmap,
-				BD70528_REG_RTC_WAKE_START, &wake,
+	ret = regmap_bulk_write(r->regmap, BD70528_REG_RTC_WAKE_START, &wake,
 				sizeof(wake));
 	if (ret) {
 		dev_err(dev, "Failed to set wake time\n");
 		return ret;
 	}
-	ret = regmap_bulk_write(parent->regmap, BD70528_REG_RTC_ALM_START,
-				&alm, sizeof(alm));
+	ret = regmap_bulk_write(r->regmap, BD70528_REG_RTC_ALM_START, &alm,
+				sizeof(alm));
 	if (ret)
 		dev_err(dev, "Failed to set alarm time\n");
 
@@ -312,9 +310,8 @@ static int bd71828_read_alarm(struct device *dev, struct rtc_wkalrm *a)
 	int ret;
 	struct bd71828_rtc_alm alm;
 	struct bd70528_rtc *r = dev_get_drvdata(dev);
-	struct rohm_regmap_dev *parent = r->parent;
 
-	ret = regmap_bulk_read(parent->regmap, BD71828_REG_RTC_ALM_START,
+	ret = regmap_bulk_read(r->regmap, BD71828_REG_RTC_ALM_START,
 			       &alm, sizeof(alm));
 	if (ret) {
 		dev_err(dev, "Failed to read alarm regs\n");
@@ -336,10 +333,9 @@ static int bd70528_read_alarm(struct device *dev, struct rtc_wkalrm *a)
 	struct bd70528_rtc_alm alm;
 	int ret;
 	struct bd70528_rtc *r = dev_get_drvdata(dev);
-	struct rohm_regmap_dev *parent = r->parent;
 
-	ret = regmap_bulk_read(parent->regmap, BD70528_REG_RTC_ALM_START,
-			       &alm, sizeof(alm));
+	ret = regmap_bulk_read(r->regmap, BD70528_REG_RTC_ALM_START, &alm,
+			       sizeof(alm));
 	if (ret) {
 		dev_err(dev, "Failed to read alarm regs\n");
 		return ret;
@@ -360,14 +356,12 @@ static int bd70528_set_time_locked(struct device *dev, struct rtc_time *t)
 	int ret, tmpret, old_states;
 	struct bd70528_rtc_data rtc_data;
 	struct bd70528_rtc *r = dev_get_drvdata(dev);
-	struct rohm_regmap_dev *parent = r->parent;
 
 	ret = bd70528_disable_rtc_based_timers(r, &old_states);
 	if (ret)
 		return ret;
 
-	tmpret = regmap_bulk_read(parent->regmap,
-				  r->reg_time_start, &rtc_data,
+	tmpret = regmap_bulk_read(r->regmap, r->reg_time_start, &rtc_data,
 				  sizeof(rtc_data));
 	if (tmpret) {
 		dev_err(dev, "Failed to read RTC time registers\n");
@@ -375,8 +369,7 @@ static int bd70528_set_time_locked(struct device *dev, struct rtc_time *t)
 	}
 	tm2rtc(t, &rtc_data);
 
-	tmpret = regmap_bulk_write(parent->regmap,
-				   r->reg_time_start, &rtc_data,
+	tmpret = regmap_bulk_write(r->regmap, r->reg_time_start, &rtc_data,
 				   sizeof(rtc_data));
 	if (tmpret) {
 		dev_err(dev, "Failed to set RTC time\n");
@@ -410,13 +403,11 @@ static int bd70528_set_time(struct device *dev, struct rtc_time *t)
 static int bd70528_get_time(struct device *dev, struct rtc_time *t)
 {
 	struct bd70528_rtc *r = dev_get_drvdata(dev);
-	struct rohm_regmap_dev *parent = r->parent;
 	struct bd70528_rtc_data rtc_data;
 	int ret;
 
 	/* read the RTC date and time registers all at once */
-	ret = regmap_bulk_read(parent->regmap,
-			       r->reg_time_start, &rtc_data,
+	ret = regmap_bulk_read(r->regmap, r->reg_time_start, &rtc_data,
 			       sizeof(rtc_data));
 	if (ret) {
 		dev_err(dev, "Failed to read RTC time (err %d)\n", ret);
@@ -443,7 +434,7 @@ static int bd70528_alm_enable(struct device *dev, unsigned int enabled)
 		dev_err(dev, "Failed to change wake state\n");
 		goto out_unlock;
 	}
-	ret = regmap_update_bits(r->parent->regmap, BD70528_REG_RTC_ALM_MASK,
+	ret = regmap_update_bits(r->regmap, BD70528_REG_RTC_ALM_MASK,
 				 BD70528_MASK_ALM_EN, enableval);
 	if (ret)
 		dev_err(dev, "Failed to change alarm state\n");
@@ -462,7 +453,7 @@ static int bd71828_alm_enable(struct device *dev, unsigned int enabled)
 	if (!enabled)
 		enableval = 0;
 
-	ret = regmap_update_bits(r->parent->regmap, BD71828_REG_RTC_ALM0_MASK,
+	ret = regmap_update_bits(r->regmap, BD71828_REG_RTC_ALM0_MASK,
 				 BD70528_MASK_ALM_EN, enableval);
 	if (ret)
 		dev_err(dev, "Failed to change alarm state\n");
@@ -498,7 +489,6 @@ static int bd70528_probe(struct platform_device *pdev)
 {
 	struct bd70528_rtc *bd_rtc;
 	const struct rtc_class_ops *rtc_ops;
-	struct rohm_regmap_dev *parent;
 	const char *irq_name;
 	int ret;
 	struct rtc_device *rtc;
@@ -508,20 +498,25 @@ static int bd70528_probe(struct platform_device *pdev)
 	u8 hour_reg;
 	enum rohm_chip_type chip = platform_get_device_id(pdev)->driver_data;
 
-	parent = dev_get_drvdata(pdev->dev.parent);
-	if (!parent) {
-		dev_err(&pdev->dev, "No MFD driver data\n");
-		return -EINVAL;
-	}
 	bd_rtc = devm_kzalloc(&pdev->dev, sizeof(*bd_rtc), GFP_KERNEL);
 	if (!bd_rtc)
 		return -ENOMEM;
 
-	bd_rtc->parent = parent;
+	bd_rtc->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!bd_rtc->regmap) {
+		dev_err(&pdev->dev, "No regmap\n");
+		return -EINVAL;
+	}
+
 	bd_rtc->dev = &pdev->dev;
 
 	switch (chip) {
 	case ROHM_CHIP_TYPE_BD70528:
+		bd_rtc->parent = dev_get_drvdata(pdev->dev.parent);
+		if (!bd_rtc->parent) {
+			dev_err(&pdev->dev, "No MFD data\n");
+			return -EINVAL;
+		}
 		irq_name = "bd70528-rtc-alm";
 		bd_rtc->has_rtc_timers = true;
 		bd_rtc->reg_time_start = BD70528_REG_RTC_START;
@@ -547,7 +542,7 @@ static int bd70528_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, bd_rtc);
 
-	ret = regmap_read(parent->regmap, hour_reg, &hr);
+	ret = regmap_read(bd_rtc->regmap, hour_reg, &hr);
 
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to reag RTC clock\n");
@@ -595,7 +590,7 @@ static int bd70528_probe(struct platform_device *pdev)
 	 *  from sub-registers when IRQ is disabled or freed.
 	 */
 	if (enable_main_irq) {
-		ret = regmap_update_bits(parent->regmap,
+		ret = regmap_update_bits(bd_rtc->regmap,
 				 BD70528_REG_INT_MAIN_MASK,
 				 BD70528_INT_RTC_MASK, 0);
 		if (ret) {
-- 
2.25.4


-- 
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND

~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =] 

  reply	other threads:[~2021-01-08 13:31 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-08 13:27 [PATCH 00/15] Support ROHM BD71815 PMIC Matti Vaittinen
2021-01-08 13:29 ` Matti Vaittinen [this message]
2021-01-08 13:31 ` [PATCH 02/15] clk: BD718x7: Do not depend on parent driver data Matti Vaittinen
2021-01-08 13:32 ` [PATCH 03/15] mfd: bd718x7: simplify by cleaning unnecessary device data Matti Vaittinen
2021-01-08 13:34 ` [PATCH 04/15] dt_bindings: bd71828: Add clock output mode Matti Vaittinen
2021-01-13 13:52   ` Rob Herring
2021-01-13 14:52     ` Matti Vaittinen
2021-01-13 15:52       ` Rob Herring
2021-01-08 13:34 ` [PATCH 05/15] dt_bindings: mfd: Add ROHM BD71815 PMIC Matti Vaittinen
2021-01-11 19:06   ` Rob Herring
2021-01-12  6:14     ` Vaittinen, Matti
2021-01-08 13:36 ` [PATCH 06/15] dt_bindings: regulator: Add ROHM BD71815 PMIC regulators Matti Vaittinen
2021-01-11 19:09   ` Rob Herring
2021-01-12  6:10     ` Matti Vaittinen
2021-01-13 13:53       ` Rob Herring
2021-01-13 14:23         ` Vaittinen, Matti
2021-01-13 15:47           ` Rob Herring
2021-01-08 13:37 ` [PATCH 07/15] mfd: Add ROHM BD71815 ID Matti Vaittinen
2021-01-08 13:37 ` [PATCH 08/15] mfd: Support for ROHM BD71815 PMIC core Matti Vaittinen
2021-01-08 13:39 ` [PATCH 09/15] gpio: support ROHM BD71815 GPOs Matti Vaittinen
2021-01-08 19:28   ` kernel test robot
2021-01-09  0:45   ` Linus Walleij
2021-01-11  6:15     ` Vaittinen, Matti
2021-01-11  7:26       ` Vaittinen, Matti
2021-01-08 13:41 ` [PATCH 10/15] regulator: helpers: Export helper voltage listing Matti Vaittinen
2021-01-08 13:42 ` [PATCH 11/15] regulator: rohm-regulator: SNVS dvs and linear voltage support Matti Vaittinen
2021-01-15  8:26   ` Lee Jones
2021-01-15  9:10     ` Vaittinen, Matti
2021-01-15  9:48     ` Matti Vaittinen
2021-01-08 13:43 ` [PATCH 12/15] regulator: Support ROHM BD71815 regulators Matti Vaittinen
2021-01-08 22:30   ` kernel test robot
2021-01-08 13:45 ` [PATCH 13/15] clk: bd718x7: Add support for clk gate on ROHM BD71815 PMIC Matti Vaittinen
2021-01-08 13:46 ` [PATCH 14/15] rtc: bd70528: Support RTC on ROHM BD71815 Matti Vaittinen
2021-01-08 13:46 ` [PATCH 15/15] MAINTAINERS: Add ROHM BD71815AGW Matti Vaittinen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=fc961d2730c14f634e2cda1813c0a871cbd2a7f4.1610110144.git.matti.vaittinen@fi.rohmeurope.com \
    --to=matti.vaittinen@fi.rohmeurope.com \
    --cc=a.zummo@towertech.it \
    --cc=alexandre.belloni@bootlin.com \
    --cc=lee.jones@linaro.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-power@fi.rohmeurope.com \
    --cc=linux-rtc@vger.kernel.org \
    --cc=mazziesaccount@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).