linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Fenglin Wu <quic_fenglinw@quicinc.com>
To: Rob Herring <robh@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>, <sboyd@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>, <maz@kernel.org>,
	<devicetree@vger.kernel.org>, Andy Gross <agross@kernel.org>,
	<linux-kernel@vger.kernel.org>, <linux-arm-msm@vger.kernel.org>,
	<tglx@linutronix.de>, <collinsd@codeaurora.org>,
	<subbaram@codeaurora.org>
Subject: Re: [RESEND PATCH v2 11/11] dt-bindings: convert qcom,spmi-pmic-arb binding to YAML format
Date: Mon, 15 Nov 2021 14:38:28 +0800	[thread overview]
Message-ID: <fcbeded0-8619-79dc-ec2e-42481acbc43c@quicinc.com> (raw)
In-Reply-To: <b2c7bfcb-754b-8817-667e-b81a6ca5500f@quicinc.com>


On 2021/11/15 8:16, Fenglin Wu wrote:
>
> On 2021/11/12 21:48, Rob Herring wrote:
>> On Fri, 12 Nov 2021 12:24:19 +0800, Fenglin Wu wrote:
>>> Convert the SPMI PMIC arbiter documentation to JSON/yaml.
>>>
>>> Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
>>> ---
>>>   .../bindings/spmi/qcom,spmi-pmic-arb.txt           |  67 -----------
>>>   .../bindings/spmi/qcom,spmi-pmic-arb.yaml          | 122 
>>> +++++++++++++++++++++
>>>   2 files changed, 122 insertions(+), 67 deletions(-)
>>>   delete mode 100644 
>>> Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
>>>   create mode 100644 
>>> Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml
>>>
>> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
>> on your patch (DT_CHECKER_FLAGS is new in v5.13):
>>
>> yamllint warnings/errors:
>>
>> dtschema/dtc warnings/errors:
>> /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml: 
>> properties:interrupt-names: 'const' should not be valid under 
>> {'enum': ['const', 'enum', 'exclusiveMaximum', 'exclusiveMinimum', 
>> 'minimum', 'maximum', 'multipleOf', 'pattern']}
>>     hint: Scalar and array keywords cannot be mixed
>>     from schema $id: http://devicetree.org/meta-schemas/keywords.yaml#
>> /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml: 
>> properties:reg-names: {'minItems': 3, 'maxItems': 5, 'items': 
>> [{'const': 'core'}, {'const': 'intr'}, {'const': 'cnfg'}, {'const': 
>> 'chnls'}, {'const': 'obsrvr'}]} should not be valid under 
>> {'required': ['maxItems']}
>>     hint: "maxItems" is not needed with an "items" list
>>     from schema $id: http://devicetree.org/meta-schemas/items.yaml#
>> /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml: 
>> ignoring, error in schema: properties: interrupt-names
>> warning: no schema found in file: 
>> ./Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.yaml
>> /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.example.dt.yaml: 
>> spmi@fc4cf000: reg: [[4232900608, 4096], [4232884224, 4096], 
>> [4232880128, 4096]] is too long
>>     From schema: 
>> /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/spmi/spmi.yaml
>> Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.example.dt.yaml:0:0: 
>> /example-0/spmi@fc4cf000: failed to match any schema with compatible: 
>> ['qcom,spmi-pmic-arb']
>>
>> doc reference errors (make refcheckdocs):
>> Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt: 
>> Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt
>>
>> See https://patchwork.ozlabs.org/patch/1554141
>>
>> This check can fail if there are any dependencies. The base for a patch
>> series is generally the most recent rc1.
>>
>> If you already ran 'make dt_binding_check' and didn't see the above
>> error(s), then make sure 'yamllint' is installed and dt-schema is up to
>> date:
>>
>> pip3 install dtschema --upgrade
>>
>> Please check and re-submit.
> I actually ran "make dt-binding-check 
> DT_SCHEMA_FILES=Documentation/devicetree/bindings/qcom,spmi-pmic-arb.txt"
> and confirmed there was no error or warning before pushing the change. 
> Anyway I will follow
> your steps here andcheck it again, if any changes is required, I will 
> have them updated it
> in next patchset.
> Thanks
I could see the same warning message after installed 'yamllint'.
I will fix this and re-submit.
Thanks

      reply	other threads:[~2021-11-15  6:38 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-11-12  4:24 [RESEND PATCH v2 00/11] A bunch of fix and optimization patches in spmi-pmic-arb.c Fenglin Wu
2021-11-12  4:24 ` [RESEND PATCH v2 01/11] spmi: pmic-arb: handle spurious interrupt Fenglin Wu
2021-11-12  4:24 ` [RESEND PATCH v2 02/11] spmi: pmic-arb: do not ack and clear peripheral interrupts in cleanup_irq Fenglin Wu
2021-11-12  4:24 ` [RESEND PATCH v2 03/11] spmi: pmic-arb: check apid against limits before calling irq handler Fenglin Wu
2021-11-12  4:24 ` [RESEND PATCH v2 04/11] spmi: pmic-arb: add support to dispatch interrupt based on IRQ status Fenglin Wu
2021-11-12  4:24 ` [RESEND PATCH v2 05/11] spmi: pmic-arb: correct duplicate APID to PPID mapping logic Fenglin Wu
2021-11-12  4:24 ` [RESEND PATCH v2 06/11] spmi: pmic-arb: block access for invalid PMIC arbiter v5 SPMI writes Fenglin Wu
2021-11-12  4:24 ` [RESEND PATCH v2 07/11] spmi: pmic-arb: clear unexpected interrupt trigger type Fenglin Wu
2021-11-12  4:24 ` [RESEND PATCH v2 08/11] bindings: spmi: spmi-pmic-arb: mark interrupt properties as optional Fenglin Wu
2021-11-12 15:13   ` Rob Herring
2021-11-12  4:24 ` [RESEND PATCH v2 09/11] spmi: pmic-arb: make interrupt support optional Fenglin Wu
2021-11-12  4:24 ` [RESEND PATCH v2 10/11] spmi: pmic-arb: increase SPMI transaction timeout delay Fenglin Wu
2021-11-12  4:24 ` [RESEND PATCH v2 11/11] dt-bindings: convert qcom,spmi-pmic-arb binding to YAML format Fenglin Wu
2021-11-12 13:48   ` Rob Herring
2021-11-15  0:16     ` Fenglin Wu
2021-11-15  6:38       ` Fenglin Wu [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=fcbeded0-8619-79dc-ec2e-42481acbc43c@quicinc.com \
    --to=quic_fenglinw@quicinc.com \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=collinsd@codeaurora.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maz@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=robh@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=subbaram@codeaurora.org \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).