linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* balance interrupts
@ 2003-12-08 17:59 Julien Oster
  0 siblings, 0 replies; 17+ messages in thread
From: Julien Oster @ 2003-12-08 17:59 UTC (permalink / raw)
  To: Linux Kernel Mailing List


Hello!

Now that my IO-APIC finally works without lockups (thanks to all!) on
my nforce2 boards, my interrupts are much less crowded. However,
there's still one line in /proc/interrupts which I don't really like,
it's also the only line where more than one piece of hardware shares
the same interrupt:

 18:     445160   IO-APIC-level  ide2, ide3, eth0

ide2 and ide3 are my onboard Silicon Image SATA controller. I guess
you can't keep them apart on to different interrupts, since it's only
one chip which is most probably connected to one IRQ line only.

But I don't think that eth0 has to be on the same interrupt as my SATA
controller. So, how do I make it go away to another place? I would be
fine sharing it with e.g. eth1, which is alone on IRQ 19.

BTW, the whole /proc/interrupts looks like this:

           CPU0
  0:   40022145    IO-APIC-edge  timer
  1:      62950    IO-APIC-edge  i8042
  2:          0          XT-PIC  cascade
  8:     681626    IO-APIC-edge  rtc
  9:          0   IO-APIC-level  acpi
 12:         55    IO-APIC-edge  i8042
 14:     968274    IO-APIC-edge  ide0
 15:    1789182    IO-APIC-edge  ide1
 16:     404489   IO-APIC-level  EMU10K1
 18:     445160   IO-APIC-level  ide2, ide3, eth0
 19:    1596427   IO-APIC-level  eth1
 20:          0   IO-APIC-level  ohci_hcd
 21:          0   IO-APIC-level  NVidia nForce2
 22:      36730   IO-APIC-level  ohci_hcd
NMI:          0
LOC:   40021891
ERR:          0
MIS:        310

Regards,
Julien

^ permalink raw reply	[flat|nested] 17+ messages in thread

end of thread, other threads:[~2003-12-10 13:06 UTC | newest]

Thread overview: 17+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
     [not found] <BF1FE1855350A0479097B3A0D2A80EE00184D619@hdsmsx402.hd.intel.com>
2003-12-08 19:29 ` balance interrupts Len Brown
2003-12-08 20:00   ` Julien Oster
2003-12-08 20:02     ` Julien Oster
2003-12-08 21:46     ` Len Brown
2003-12-09  3:51   ` Bob
2003-12-09  5:11     ` Stephen Satchell
2003-12-09 13:19     ` Swap performance statistics in 2.6 -- which /proc file has it? Stephen Satchell
2003-12-09 13:56       ` Richard B. Johnson
2003-12-09 14:46         ` Stephen Satchell
2003-12-09 15:25           ` Richard B. Johnson
2003-12-09 19:53             ` Dominik Kubla
2003-12-09 20:24               ` Richard B. Johnson
2003-12-10 10:18                 ` Dominik Kubla
2003-12-10  1:28               ` Stephen Satchell
2003-12-10 10:34                 ` Dominik Kubla
2003-12-10 13:06                   ` Answer to Swap performance statistics in 2.6 -- which /proc file has it Stephen Satchell
2003-12-08 17:59 balance interrupts Julien Oster

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).