Rafael J. Wysocki wrote: > This message contains a list of some regressions introduced between 2.6.27 and > 2.6.28, for which there are no fixes in the mainline I know of. If any of them > have been fixed already, please let me know. > > If you know of any other unresolved regressions introduced between 2.6.27 > and 2.6.28, please let me know either and I'll add them to the list. Hi, with kernel 2.6.28 and 2.6.28.1 while in X with active DPMS screen off ("xset dpms force off") the CPU does not go into C3 state when idle. With 2.6.27.10 and 2.6.27.12 the CPU does fall into C3 state when idle as observed with powertop 1.11. Hardware is a laptop with AMD Turion 64 MT-40, ATI RS480, IXP SB400, Radeon XPRESS 200M chip set. System is Debian testing (libc 2.7, gcc 4.3.2, X.Org Server 1.4.2, radeon module 4.3.0) with self-compiled kernels from kernel.org (.config appended). This happens also on an older laptop with Intel Pentium 4 mobile and Radeon Mobility 7500. Do I need a newer version of the X server? -- Regards, Jörg-Volker.