linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH 0/8] ARM64: dts: meson-gxl: Add extended support
@ 2016-10-31 16:44 Neil Armstrong
  2016-10-31 16:44 ` [PATCH 1/8] ARM64: dts: meson-gxbb: Move common nodes to meson-gx Neil Armstrong
                   ` (7 more replies)
  0 siblings, 8 replies; 11+ messages in thread
From: Neil Armstrong @ 2016-10-31 16:44 UTC (permalink / raw)
  To: khilman, carlo, linus.walleij
  Cc: Neil Armstrong, linux-amlogic, linux-arm-kernel, linux-kernel,
	devicetree

This patchset provides extended peripheral support for the Amlogix GXL SoCs.

In order to support more functionalities, this patchset :
 - Moves peripheral nodes to the common Meson arm64 dtsi
 - Add i2c, mmc, sd, sdio, pinctrl and clock nodes for GXL
 - Adds correct GXL P23X boards uart pinctrl
 - Add SD/MMC and SDIO WiFi support support for P23X boards

This patchset depends on pinctrl patch at [1] and the dt-include file :
include/dt-bindings/gpio/meson-gxl-gpio.h

Changes since original RFC patchset at : [2]
 - Rebased on v4.10/dt64 at [3] commit b2ac270c3836 ("ARM64: dts: meson-gxbb: Add SCPI with cpufreq & sensors Nodes")

[1] http://lkml.kernel.org/r/1477931531-27120-1-git-send-email-narmstrong@baylibre.com
[2] http://lkml.kernel.org/r/1477060838-14164-1-git-send-email-narmstrong@baylibre.com
[3] git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic.git

Neil Armstrong (8):
  ARM64: dts: meson-gxbb: Move common nodes to meson-gx
  ARM64: dts: meson-gxl: Add pinctrl nodes
  ARM64: dts: meson-gxl: Add clock nodes
  ARM64: dts: meson-gxl: Add i2c nodes
  ARM64: dts: meson-gxl: Add MMC/SD/SDIO nodes
  ARM64: dts: meson-gxl-p23x: Add uart pinctrl
  ARM64: dts: meson-gxl-p23x: Add SD/SDIO/MMC and PWM nodes
  ARM64: dts: meson-gxl-p23x: Enable IR receiver

 arch/arm64/boot/dts/amlogic/meson-gx.dtsi          | 131 +++++++++++++
 arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi        | 153 ++-------------
 .../boot/dts/amlogic/meson-gxl-s905d-p23x.dtsi     | 121 ++++++++++++
 arch/arm64/boot/dts/amlogic/meson-gxl.dtsi         | 210 +++++++++++++++++++++
 4 files changed, 479 insertions(+), 136 deletions(-)

-- 
1.9.1

^ permalink raw reply	[flat|nested] 11+ messages in thread

* [PATCH 1/8] ARM64: dts: meson-gxbb: Move common nodes to meson-gx
  2016-10-31 16:44 [PATCH 0/8] ARM64: dts: meson-gxl: Add extended support Neil Armstrong
@ 2016-10-31 16:44 ` Neil Armstrong
  2016-10-31 16:44 ` [PATCH 2/8] ARM64: dts: meson-gxl: Add pinctrl nodes Neil Armstrong
                   ` (6 subsequent siblings)
  7 siblings, 0 replies; 11+ messages in thread
From: Neil Armstrong @ 2016-10-31 16:44 UTC (permalink / raw)
  To: khilman, carlo
  Cc: Neil Armstrong, linux-amlogic, linux-arm-kernel, linux-kernel,
	devicetree

Move common nodes between GXBB and GXL in to the common GX dtsi.
Leave the clock attributes in the GXBB dtsi for now.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-gx.dtsi   | 131 ++++++++++++++++++++++++
 arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 153 ++++------------------------
 2 files changed, 148 insertions(+), 136 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index fd1d0de..91be4f2 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -129,6 +129,30 @@
 		#clock-cells = <0>;
 	};
 
+	firmware {
+		sm: secure-monitor {
+			compatible = "amlogic,meson-gx-sm", "amlogic,meson-gxbb-sm";
+		};
+	};
+
+	efuse: efuse {
+		compatible = "amlogic,meson-gx-efuse", "amlogic,meson-gxbb-efuse";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		sn: sn@14 {
+			reg = <0x14 0x10>;
+		};
+
+		eth_mac: eth_mac@34 {
+			reg = <0x34 0x10>;
+		};
+
+		bid: bid@46 {
+			reg = <0x46 0x30>;
+		};
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
@@ -142,6 +166,12 @@
 			#size-cells = <2>;
 			ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>;
 
+			reset: reset-controller@4404 {
+				compatible = "amlogic,meson-gx-reset", "amlogic,meson-gxbb-reset";
+				reg = <0x0 0x04404 0x0 0x20>;
+				#reset-cells = <1>;
+			};
+
 			uart_A: serial@84c0 {
 				compatible = "amlogic,meson-uart";
 				reg = <0x0 0x84c0 0x0 0x14>;
@@ -149,6 +179,76 @@
 				clocks = <&xtal>;
 				status = "disabled";
 			};
+
+			uart_B: serial@84dc {
+				compatible = "amlogic,meson-uart";
+				reg = <0x0 0x84dc 0x0 0x14>;
+				interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>;
+				status = "disabled";
+			};
+
+			i2c_A: i2c@8500 {
+				compatible = "amlogic,meson-gxbb-i2c";
+				reg = <0x0 0x08500 0x0 0x20>;
+				interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			pwm_ab: pwm@8550 {
+				compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
+				reg = <0x0 0x08550 0x0 0x10>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_cd: pwm@8650 {
+				compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
+				reg = <0x0 0x08650 0x0 0x10>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_ef: pwm@86c0 {
+				compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
+				reg = <0x0 0x086c0 0x0 0x10>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			uart_C: serial@8700 {
+				compatible = "amlogic,meson-uart";
+				reg = <0x0 0x8700 0x0 0x14>;
+				interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>;
+				status = "disabled";
+			};
+
+			i2c_B: i2c@87c0 {
+				compatible = "amlogic,meson-gxbb-i2c";
+				reg = <0x0 0x087c0 0x0 0x20>;
+				interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c_C: i2c@87e0 {
+				compatible = "amlogic,meson-gxbb-i2c";
+				reg = <0x0 0x087e0 0x0 0x20>;
+				interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			watchdog@98d0 {
+				compatible = "amlogic,meson-gx-wdt", "amlogic,meson-gxbb-wdt";
+				reg = <0x0 0x098d0 0x0 0x10>;
+				clocks = <&xtal>;
+			};
 		};
 
 		gic: interrupt-controller@c4301000 {
@@ -178,6 +278,13 @@
 				clocks = <&xtal>;
 				status = "disabled";
 			};
+
+			ir: ir@580 {
+				compatible = "amlogic,meson-gxbb-ir";
+				reg = <0x0 0x00580 0x0 0x40>;
+				interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
 		};
 
 		periphs: periphs@c8834000 {
@@ -186,6 +293,11 @@
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges = <0x0 0x0 0x0 0xc8834000 0x0 0x2000>;
+
+			rng {
+				compatible = "amlogic,meson-rng";
+				reg = <0x0 0x0 0x0 0x4>;
+			};
 		};
 
 
@@ -195,6 +307,25 @@
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>;
+
+			mailbox: mailbox@404 {
+				compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu";
+				reg = <0 0x404 0 0x4c>;
+				interrupts = <0 208 IRQ_TYPE_EDGE_RISING>,
+					     <0 209 IRQ_TYPE_EDGE_RISING>,
+					     <0 210 IRQ_TYPE_EDGE_RISING>;
+				#mbox-cells = <1>;
+			};
+		};
+
+		ethmac: ethernet@c9410000 {
+			compatible = "amlogic,meson-gx-dwmac", "amlogic,meson-gxbb-dwmac", "snps,dwmac";
+			reg = <0x0 0xc9410000 0x0 0x10000
+			       0x0 0xc8834540 0x0 0x4>;
+			interrupts = <0 8 1>;
+			interrupt-names = "macirq";
+			phy-mode = "rgmii";
+			status = "disabled";
 		};
 
 		apb: apb@d0000000 {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index 2d69a3b..160664f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -50,30 +50,6 @@
 / {
 	compatible = "amlogic,meson-gxbb";
 
-	firmware {
-		sm: secure-monitor {
-			compatible = "amlogic,meson-gxbb-sm";
-		};
-	};
-
-	efuse: efuse {
-		compatible = "amlogic,meson-gxbb-efuse";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		sn: sn@14 {
-			reg = <0x14 0x10>;
-		};
-
-		eth_mac: eth_mac@34 {
-			reg = <0x34 0x10>;
-		};
-
-		bid: bid@46 {
-			reg = <0x46 0x30>;
-		};
-	};
-
 	scpi {
 		compatible = "amlogic,meson-gxbb-scpi";
 		mboxes = <&mailbox 1 &mailbox 2>;
@@ -158,20 +134,6 @@
 			dr_mode = "host";
 			status = "disabled";
 		};
-
-		ethmac: ethernet@c9410000 {
-			compatible = "amlogic,meson-gxbb-dwmac", "snps,dwmac";
-			reg = <0x0 0xc9410000 0x0 0x10000
-			       0x0 0xc8834540 0x0 0x4>;
-			interrupts = <0 8 1>;
-			interrupt-names = "macirq";
-			clocks = <&clkc CLKID_ETH>,
-				 <&clkc CLKID_FCLK_DIV2>,
-				 <&clkc CLKID_MPLL2>;
-			clock-names = "stmmaceth", "clkin0", "clkin1";
-			phy-mode = "rgmii";
-			status = "disabled";
-		};
 	};
 };
 
@@ -192,55 +154,6 @@
 };
 
 &cbus {
-	reset: reset-controller@4404 {
-		compatible = "amlogic,meson-gxbb-reset";
-		reg = <0x0 0x04404 0x0 0x20>;
-		#reset-cells = <1>;
-	};
-
-	uart_B: serial@84dc {
-		compatible = "amlogic,meson-uart";
-		reg = <0x0 0x84dc 0x0 0x14>;
-		interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
-		clocks = <&xtal>;
-		status = "disabled";
-	};
-
-	pwm_ab: pwm@8550 {
-		compatible = "amlogic,meson-gxbb-pwm";
-		reg = <0x0 0x08550 0x0 0x10>;
-		#pwm-cells = <3>;
-		status = "disabled";
-	};
-
-	pwm_cd: pwm@8650 {
-		compatible = "amlogic,meson-gxbb-pwm";
-		reg = <0x0 0x08650 0x0 0x10>;
-		#pwm-cells = <3>;
-		status = "disabled";
-	};
-
-	pwm_ef: pwm@86c0 {
-		compatible = "amlogic,meson-gxbb-pwm";
-		reg = <0x0 0x086c0 0x0 0x10>;
-		#pwm-cells = <3>;
-		status = "disabled";
-	};
-
-	uart_C: serial@8700 {
-		compatible = "amlogic,meson-uart";
-		reg = <0x0 0x8700 0x0 0x14>;
-		interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
-		clocks = <&xtal>;
-		status = "disabled";
-	};
-
-	watchdog@98d0 {
-		compatible = "amlogic,meson-gxbb-wdt";
-		reg = <0x0 0x098d0 0x0 0x10>;
-		clocks = <&xtal>;
-	};
-
 	spifc: spi@8c80 {
 		compatible = "amlogic,meson-gxbb-spifc";
 		reg = <0x0 0x08c80 0x0 0x80>;
@@ -249,36 +162,13 @@
 		clocks = <&clkc CLKID_SPI>;
 		status = "disabled";
 	};
+};
 
-	i2c_A: i2c@8500 {
-		compatible = "amlogic,meson-gxbb-i2c";
-		reg = <0x0 0x08500 0x0 0x20>;
-		interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
-		clocks = <&clkc CLKID_I2C>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	i2c_B: i2c@87c0 {
-		compatible = "amlogic,meson-gxbb-i2c";
-		reg = <0x0 0x087c0 0x0 0x20>;
-		interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
-		clocks = <&clkc CLKID_I2C>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	i2c_C: i2c@87e0 {
-		compatible = "amlogic,meson-gxbb-i2c";
-		reg = <0x0 0x087e0 0x0 0x20>;
-		interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
-		clocks = <&clkc CLKID_I2C>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
+&ethmac {
+	clocks = <&clkc CLKID_ETH>,
+		 <&clkc CLKID_FCLK_DIV2>,
+		 <&clkc CLKID_MPLL2>;
+	clock-names = "stmmaceth", "clkin0", "clkin1";
 };
 
 &aobus {
@@ -355,13 +245,6 @@
 		#reset-cells = <1>;
 	};
 
-	ir: ir@580 {
-		compatible = "amlogic,meson-gxbb-ir";
-		reg = <0x0 0x00580 0x0 0x40>;
-		interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>;
-		status = "disabled";
-	};
-
 	pwm_ab_AO: pwm@550 {
 		compatible = "amlogic,meson-gxbb-pwm";
 		reg = <0x0 0x0550 0x0 0x10>;
@@ -381,11 +264,6 @@
 };
 
 &periphs {
-	rng {
-		compatible = "amlogic,meson-rng";
-		reg = <0x0 0x0 0x0 0x4>;
-	};
-
 	pinctrl_periphs: pinctrl@4b0 {
 		compatible = "amlogic,meson-gxbb-periphs-pinctrl";
 		#address-cells = <2>;
@@ -593,15 +471,18 @@
 		#clock-cells = <1>;
 		reg = <0x0 0x0 0x0 0x3db>;
 	};
+};
 
-	mailbox: mailbox@404 {
-		compatible = "amlogic,meson-gxbb-mhu";
-		reg = <0 0x404 0 0x4c>;
-		interrupts = <0 208 IRQ_TYPE_EDGE_RISING>,
-			     <0 209 IRQ_TYPE_EDGE_RISING>,
-			     <0 210 IRQ_TYPE_EDGE_RISING>;
-		#mbox-cells = <1>;
-	};
+&i2c_A {
+	clocks = <&clkc CLKID_I2C>;
+};
+
+&i2c_B {
+	clocks = <&clkc CLKID_I2C>;
+};
+
+&i2c_C {
+	clocks = <&clkc CLKID_I2C>;
 };
 
 &sd_emmc_a {
-- 
1.9.1

^ permalink raw reply	[flat|nested] 11+ messages in thread

* [PATCH 2/8] ARM64: dts: meson-gxl: Add pinctrl nodes
  2016-10-31 16:44 [PATCH 0/8] ARM64: dts: meson-gxl: Add extended support Neil Armstrong
  2016-10-31 16:44 ` [PATCH 1/8] ARM64: dts: meson-gxbb: Move common nodes to meson-gx Neil Armstrong
@ 2016-10-31 16:44 ` Neil Armstrong
  2016-11-07 22:30   ` Kevin Hilman
  2016-10-31 16:44 ` [PATCH 3/8] ARM64: dts: meson-gxl: Add clock nodes Neil Armstrong
                   ` (5 subsequent siblings)
  7 siblings, 1 reply; 11+ messages in thread
From: Neil Armstrong @ 2016-10-31 16:44 UTC (permalink / raw)
  To: khilman, carlo, linus.walleij
  Cc: Neil Armstrong, linux-amlogic, linux-arm-kernel, linux-kernel,
	devicetree

Add pinctrl nodes and pin definitions for Amlogic Meson GXL.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 168 +++++++++++++++++++++++++++++
 1 file changed, 168 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index 13b10ee..ce7f550 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -42,7 +42,175 @@
  */
 
 #include "meson-gx.dtsi"
+#include <dt-bindings/gpio/meson-gxl-gpio.h>
 
 / {
 	compatible = "amlogic,meson-gxl";
 };
+
+&aobus {
+	pinctrl_aobus: pinctrl@14 {
+		compatible = "amlogic,meson-gxl-aobus-pinctrl";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gpio_ao: bank@14 {
+			reg = <0x0 0x00014 0x0 0x8>,
+			      <0x0 0x0002c 0x0 0x4>,
+			      <0x0 0x00024 0x0 0x8>;
+			reg-names = "mux", "pull", "gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		uart_ao_a_pins: uart_ao_a {
+			mux {
+				groups = "uart_tx_ao_a", "uart_rx_ao_a";
+				function = "uart_ao";
+			};
+		};
+
+		remote_input_ao_pins: remote_input_ao {
+			mux {
+				groups = "remote_input_ao";
+				function = "remote_input_ao";
+			};
+		};
+	};
+};
+
+&periphs {
+	pinctrl_periphs: pinctrl@4b0 {
+		compatible = "amlogic,meson-gxl-periphs-pinctrl";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gpio: bank@4b0 {
+			reg = <0x0 0x004b0 0x0 0x28>,
+			      <0x0 0x004e8 0x0 0x14>,
+			      <0x0 0x00120 0x0 0x14>,
+			      <0x0 0x00430 0x0 0x40>;
+			reg-names = "mux", "pull", "pull-enable", "gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		emmc_pins: emmc {
+			mux {
+				groups = "emmc_nand_d07",
+				       "emmc_cmd",
+				       "emmc_clk",
+				       "emmc_ds";
+				function = "emmc";
+			};
+		};
+
+		sdcard_pins: sdcard {
+			mux {
+				groups = "sdcard_d0",
+				       "sdcard_d1",
+				       "sdcard_d2",
+				       "sdcard_d3",
+				       "sdcard_cmd",
+				       "sdcard_clk";
+				function = "sdcard";
+			};
+		};
+
+		sdio_pins: sdio {
+			mux {
+				groups = "sdio_d0",
+				       "sdio_d1",
+				       "sdio_d2",
+				       "sdio_d3",
+				       "sdio_cmd",
+				       "sdio_clk";
+				function = "sdio";
+			};
+		};
+
+		sdio_irq_pins: sdio_irq {
+			mux {
+				groups = "sdio_irq";
+				function = "sdio";
+			};
+		};
+
+		uart_a_pins: uart_a {
+			mux {
+				groups = "uart_tx_a",
+				       "uart_rx_a";
+				function = "uart_a";
+			};
+		};
+
+		uart_b_pins: uart_b {
+			mux {
+				groups = "uart_tx_b",
+				       "uart_rx_b";
+				function = "uart_b";
+			};
+		};
+
+		uart_c_pins: uart_c {
+			mux {
+				groups = "uart_tx_c",
+				       "uart_rx_c";
+				function = "uart_c";
+			};
+		};
+
+		i2c_a_pins: i2c_a {
+			mux {
+				groups = "i2c_sck_a",
+				     "i2c_sda_a";
+				function = "i2c_a";
+			};
+		};
+
+		i2c_b_pins: i2c_b {
+			mux {
+				groups = "i2c_sck_b",
+				      "i2c_sda_b";
+				function = "i2c_b";
+			};
+		};
+
+		i2c_c_pins: i2c_c {
+			mux {
+				groups = "i2c_sck_c",
+				      "i2c_sda_c";
+				function = "i2c_c";
+			};
+		};
+
+		eth_pins: eth_c {
+			mux {
+				groups = "eth_mdio",
+				       "eth_mdc",
+				       "eth_clk_rx_clk",
+				       "eth_rx_dv",
+				       "eth_rxd0",
+				       "eth_rxd1",
+				       "eth_rxd2",
+				       "eth_rxd3",
+				       "eth_rgmii_tx_clk",
+				       "eth_tx_en",
+				       "eth_txd0",
+				       "eth_txd1",
+				       "eth_txd2",
+				       "eth_txd3";
+				function = "eth";
+			};
+		};
+
+		pwm_e_pins: pwm_e {
+			mux {
+				groups = "pwm_e";
+				function = "pwm_e";
+			};
+		};
+	};
+};
-- 
1.9.1

^ permalink raw reply	[flat|nested] 11+ messages in thread

* [PATCH 3/8] ARM64: dts: meson-gxl: Add clock nodes
  2016-10-31 16:44 [PATCH 0/8] ARM64: dts: meson-gxl: Add extended support Neil Armstrong
  2016-10-31 16:44 ` [PATCH 1/8] ARM64: dts: meson-gxbb: Move common nodes to meson-gx Neil Armstrong
  2016-10-31 16:44 ` [PATCH 2/8] ARM64: dts: meson-gxl: Add pinctrl nodes Neil Armstrong
@ 2016-10-31 16:44 ` Neil Armstrong
  2016-10-31 16:44 ` [PATCH 4/8] ARM64: dts: meson-gxl: Add i2c nodes Neil Armstrong
                   ` (4 subsequent siblings)
  7 siblings, 0 replies; 11+ messages in thread
From: Neil Armstrong @ 2016-10-31 16:44 UTC (permalink / raw)
  To: khilman, carlo
  Cc: Neil Armstrong, linux-amlogic, linux-arm-kernel, linux-kernel,
	devicetree

Add clock node for Amlogic Meson GXL.
The GXBB compatible is retained since the GXBB clock tree is used for now.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index ce7f550..33d0506 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -42,6 +42,7 @@
  */
 
 #include "meson-gx.dtsi"
+#include <dt-bindings/clock/gxbb-clkc.h>
 #include <dt-bindings/gpio/meson-gxl-gpio.h>
 
 / {
@@ -214,3 +215,11 @@
 		};
 	};
 };
+
+&hiubus {
+	clkc: clock-controller@0 {
+		compatible = "amlogic,gxl-clkc", "amlogic,gxbb-clkc";
+		#clock-cells = <1>;
+		reg = <0x0 0x0 0x0 0x3db>;
+	};
+};
-- 
1.9.1

^ permalink raw reply	[flat|nested] 11+ messages in thread

* [PATCH 4/8] ARM64: dts: meson-gxl: Add i2c nodes
  2016-10-31 16:44 [PATCH 0/8] ARM64: dts: meson-gxl: Add extended support Neil Armstrong
                   ` (2 preceding siblings ...)
  2016-10-31 16:44 ` [PATCH 3/8] ARM64: dts: meson-gxl: Add clock nodes Neil Armstrong
@ 2016-10-31 16:44 ` Neil Armstrong
  2016-10-31 16:44 ` [PATCH 5/8] ARM64: dts: meson-gxl: Add MMC/SD/SDIO nodes Neil Armstrong
                   ` (3 subsequent siblings)
  7 siblings, 0 replies; 11+ messages in thread
From: Neil Armstrong @ 2016-10-31 16:44 UTC (permalink / raw)
  To: khilman, carlo
  Cc: Neil Armstrong, linux-amlogic, linux-arm-kernel, linux-kernel,
	devicetree

Add i2c nodes clock attributes for Amlogic Meson GXL.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index 33d0506..b45df2a 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -223,3 +223,15 @@
 		reg = <0x0 0x0 0x0 0x3db>;
 	};
 };
+
+&i2c_A {
+	clocks = <&clkc CLKID_I2C>;
+};
+
+&i2c_B {
+	clocks = <&clkc CLKID_I2C>;
+};
+
+&i2c_C {
+	clocks = <&clkc CLKID_I2C>;
+};
-- 
1.9.1

^ permalink raw reply	[flat|nested] 11+ messages in thread

* [PATCH 5/8] ARM64: dts: meson-gxl: Add MMC/SD/SDIO nodes
  2016-10-31 16:44 [PATCH 0/8] ARM64: dts: meson-gxl: Add extended support Neil Armstrong
                   ` (3 preceding siblings ...)
  2016-10-31 16:44 ` [PATCH 4/8] ARM64: dts: meson-gxl: Add i2c nodes Neil Armstrong
@ 2016-10-31 16:44 ` Neil Armstrong
  2016-10-31 16:44 ` [PATCH 6/8] ARM64: dts: meson-gxl-p23x: Add uart pinctrl Neil Armstrong
                   ` (2 subsequent siblings)
  7 siblings, 0 replies; 11+ messages in thread
From: Neil Armstrong @ 2016-10-31 16:44 UTC (permalink / raw)
  To: khilman, carlo
  Cc: Neil Armstrong, linux-amlogic, linux-arm-kernel, linux-kernel,
	devicetree

Add MMC/SD/SDIO nodes clock attributes for Amlogic Meson GXL.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index b45df2a..d1bf381 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -235,3 +235,24 @@
 &i2c_C {
 	clocks = <&clkc CLKID_I2C>;
 };
+
+&sd_emmc_a {
+	clocks = <&clkc CLKID_SD_EMMC_A>,
+		 <&xtal>,
+		 <&clkc CLKID_FCLK_DIV2>;
+	clock-names = "core", "clkin0", "clkin1";
+};
+
+&sd_emmc_b {
+	clocks = <&clkc CLKID_SD_EMMC_B>,
+		 <&xtal>,
+		 <&clkc CLKID_FCLK_DIV2>;
+       clock-names = "core", "clkin0", "clkin1";
+};
+
+&sd_emmc_c {
+	clocks = <&clkc CLKID_SD_EMMC_C>,
+		 <&xtal>,
+		 <&clkc CLKID_FCLK_DIV2>;
+	clock-names = "core", "clkin0", "clkin1";
+};
-- 
1.9.1

^ permalink raw reply	[flat|nested] 11+ messages in thread

* [PATCH 6/8] ARM64: dts: meson-gxl-p23x: Add uart pinctrl
  2016-10-31 16:44 [PATCH 0/8] ARM64: dts: meson-gxl: Add extended support Neil Armstrong
                   ` (4 preceding siblings ...)
  2016-10-31 16:44 ` [PATCH 5/8] ARM64: dts: meson-gxl: Add MMC/SD/SDIO nodes Neil Armstrong
@ 2016-10-31 16:44 ` Neil Armstrong
  2016-10-31 16:44 ` [PATCH 7/8] ARM64: dts: meson-gxl-p23x: Add SD/SDIO/MMC and PWM nodes Neil Armstrong
  2016-10-31 16:44 ` [PATCH 8/8] ARM64: dts: meson-gxl-p23x: Enable IR receiver Neil Armstrong
  7 siblings, 0 replies; 11+ messages in thread
From: Neil Armstrong @ 2016-10-31 16:44 UTC (permalink / raw)
  To: khilman, carlo
  Cc: Neil Armstrong, linux-amlogic, linux-arm-kernel, linux-kernel,
	devicetree

Add pinctrl attribute to p23x uart node.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p23x.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p23x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p23x.dtsi
index bf08e87..666fe2b 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p23x.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p23x.dtsi
@@ -58,6 +58,9 @@
 	};
 };
 
+/* This UART is brought out to the DB9 connector */
 &uart_AO {
 	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
 };
-- 
1.9.1

^ permalink raw reply	[flat|nested] 11+ messages in thread

* [PATCH 7/8] ARM64: dts: meson-gxl-p23x: Add SD/SDIO/MMC and PWM nodes
  2016-10-31 16:44 [PATCH 0/8] ARM64: dts: meson-gxl: Add extended support Neil Armstrong
                   ` (5 preceding siblings ...)
  2016-10-31 16:44 ` [PATCH 6/8] ARM64: dts: meson-gxl-p23x: Add uart pinctrl Neil Armstrong
@ 2016-10-31 16:44 ` Neil Armstrong
  2016-11-05 22:10   ` Kevin Hilman
  2016-10-31 16:44 ` [PATCH 8/8] ARM64: dts: meson-gxl-p23x: Enable IR receiver Neil Armstrong
  7 siblings, 1 reply; 11+ messages in thread
From: Neil Armstrong @ 2016-10-31 16:44 UTC (permalink / raw)
  To: khilman, carlo
  Cc: Neil Armstrong, linux-amlogic, linux-arm-kernel, linux-kernel,
	devicetree

Add SD/SDIO/MMC nodes and PWM 32768Hz clock configuration to provide
storage and WiFi functionality on the p23x boards.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 .../boot/dts/amlogic/meson-gxl-s905d-p23x.dtsi     | 112 +++++++++++++++++++++
 1 file changed, 112 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p23x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p23x.dtsi
index 666fe2b..7830809 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p23x.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p23x.dtsi
@@ -56,6 +56,46 @@
 		device_type = "memory";
 		reg = <0x0 0x0 0x0 0x80000000>;
 	};
+
+	vddio_boot: regulator-vddio_boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
 };
 
 /* This UART is brought out to the DB9 connector */
@@ -64,3 +104,75 @@
 	pinctrl-0 = <&uart_ao_a_pins>;
 	pinctrl-names = "default";
 };
+
+/* Wireless SDIO Module */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-names = "default";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <100000000>;
+
+	non-removable;
+	disable-wp;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+
+	brcmf: bcrmf@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <100000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
+	cd-inverted;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <8>;
+	cap-sd-highspeed;
+	cap-mmc-highspeed;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+};
-- 
1.9.1

^ permalink raw reply	[flat|nested] 11+ messages in thread

* [PATCH 8/8] ARM64: dts: meson-gxl-p23x: Enable IR receiver
  2016-10-31 16:44 [PATCH 0/8] ARM64: dts: meson-gxl: Add extended support Neil Armstrong
                   ` (6 preceding siblings ...)
  2016-10-31 16:44 ` [PATCH 7/8] ARM64: dts: meson-gxl-p23x: Add SD/SDIO/MMC and PWM nodes Neil Armstrong
@ 2016-10-31 16:44 ` Neil Armstrong
  7 siblings, 0 replies; 11+ messages in thread
From: Neil Armstrong @ 2016-10-31 16:44 UTC (permalink / raw)
  To: khilman, carlo
  Cc: Neil Armstrong, linux-amlogic, linux-arm-kernel, linux-kernel,
	devicetree

Enable the Infraread Receiver on the p23x board.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p23x.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p23x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p23x.dtsi
index 7830809..bbe46a2 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p23x.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p23x.dtsi
@@ -105,6 +105,12 @@
 	pinctrl-names = "default";
 };
 
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
 /* Wireless SDIO Module */
 &sd_emmc_a {
 	status = "okay";
-- 
1.9.1

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH 7/8] ARM64: dts: meson-gxl-p23x: Add SD/SDIO/MMC and PWM nodes
  2016-10-31 16:44 ` [PATCH 7/8] ARM64: dts: meson-gxl-p23x: Add SD/SDIO/MMC and PWM nodes Neil Armstrong
@ 2016-11-05 22:10   ` Kevin Hilman
  0 siblings, 0 replies; 11+ messages in thread
From: Kevin Hilman @ 2016-11-05 22:10 UTC (permalink / raw)
  To: Neil Armstrong
  Cc: carlo, linux-amlogic, linux-arm-kernel, linux-kernel, devicetree

Neil Armstrong <narmstrong@baylibre.com> writes:

> Add SD/SDIO/MMC nodes and PWM 32768Hz clock configuration to provide
> storage and WiFi functionality on the p23x boards.

Just curious... what storage functionality are you referring to here?

Kevin

> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
>  .../boot/dts/amlogic/meson-gxl-s905d-p23x.dtsi     | 112 +++++++++++++++++++++
>  1 file changed, 112 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p23x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p23x.dtsi
> index 666fe2b..7830809 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p23x.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p23x.dtsi
> @@ -56,6 +56,46 @@
>  		device_type = "memory";
>  		reg = <0x0 0x0 0x0 0x80000000>;
>  	};
> +
> +	vddio_boot: regulator-vddio_boot {
> +		compatible = "regulator-fixed";
> +		regulator-name = "VDDIO_BOOT";
> +		regulator-min-microvolt = <1800000>;
> +		regulator-max-microvolt = <1800000>;
> +	};
> +
> +	vddao_3v3: regulator-vddao_3v3 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "VDDAO_3V3";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +	};
> +
> +	vcc_3v3: regulator-vcc_3v3 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "VCC_3V3";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +	};
> +
> +	emmc_pwrseq: emmc-pwrseq {
> +		compatible = "mmc-pwrseq-emmc";
> +		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
> +	};
> +
> +	wifi32k: wifi32k {
> +		compatible = "pwm-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <32768>;
> +		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
> +	};
> +
> +	sdio_pwrseq: sdio-pwrseq {
> +		compatible = "mmc-pwrseq-simple";
> +		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
> +		clocks = <&wifi32k>;
> +		clock-names = "ext_clock";
> +	};
>  };
>  
>  /* This UART is brought out to the DB9 connector */
> @@ -64,3 +104,75 @@
>  	pinctrl-0 = <&uart_ao_a_pins>;
>  	pinctrl-names = "default";
>  };
> +
> +/* Wireless SDIO Module */
> +&sd_emmc_a {
> +	status = "okay";
> +	pinctrl-0 = <&sdio_pins>;
> +	pinctrl-names = "default";
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +
> +	bus-width = <4>;
> +	cap-sd-highspeed;
> +	max-frequency = <100000000>;
> +
> +	non-removable;
> +	disable-wp;
> +
> +	mmc-pwrseq = <&sdio_pwrseq>;
> +
> +	vmmc-supply = <&vddao_3v3>;
> +	vqmmc-supply = <&vddio_boot>;
> +
> +	brcmf: bcrmf@1 {
> +		reg = <1>;
> +		compatible = "brcm,bcm4329-fmac";
> +	};
> +};
> +
> +/* SD card */
> +&sd_emmc_b {
> +	status = "okay";
> +	pinctrl-0 = <&sdcard_pins>;
> +	pinctrl-names = "default";
> +
> +	bus-width = <4>;
> +	cap-sd-highspeed;
> +	max-frequency = <100000000>;
> +	disable-wp;
> +
> +	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
> +	cd-inverted;
> +
> +	vmmc-supply = <&vddao_3v3>;
> +	vqmmc-supply = <&vddio_boot>;
> +};
> +
> +/* eMMC */
> +&sd_emmc_c {
> +	status = "okay";
> +	pinctrl-0 = <&emmc_pins>;
> +	pinctrl-names = "default";
> +
> +	bus-width = <8>;
> +	cap-sd-highspeed;
> +	cap-mmc-highspeed;
> +	max-frequency = <200000000>;
> +	non-removable;
> +	disable-wp;
> +	mmc-ddr-1_8v;
> +	mmc-hs200-1_8v;
> +
> +	mmc-pwrseq = <&emmc_pwrseq>;
> +	vmmc-supply = <&vcc_3v3>;
> +	vqmmc-supply = <&vddio_boot>;
> +};
> +
> +&pwm_ef {
> +	status = "okay";
> +	pinctrl-0 = <&pwm_e_pins>;
> +	pinctrl-names = "default";
> +	clocks = <&clkc CLKID_FCLK_DIV4>;
> +	clock-names = "clkin0";
> +};

^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH 2/8] ARM64: dts: meson-gxl: Add pinctrl nodes
  2016-10-31 16:44 ` [PATCH 2/8] ARM64: dts: meson-gxl: Add pinctrl nodes Neil Armstrong
@ 2016-11-07 22:30   ` Kevin Hilman
  0 siblings, 0 replies; 11+ messages in thread
From: Kevin Hilman @ 2016-11-07 22:30 UTC (permalink / raw)
  To: Neil Armstrong
  Cc: carlo, linus.walleij, linux-amlogic, linux-arm-kernel,
	linux-kernel, devicetree

Neil Armstrong <narmstrong@baylibre.com> writes:

> Add pinctrl nodes and pin definitions for Amlogic Meson GXL.
>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
>  arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 168 +++++++++++++++++++++++++++++
>  1 file changed, 168 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
> index 13b10ee..ce7f550 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
> @@ -42,7 +42,175 @@
>   */
>  
>  #include "meson-gx.dtsi"
> +#include <dt-bindings/gpio/meson-gxl-gpio.h>

Oops, this has a dependency on the patch going through the pinctrl tree,
which causes probelems we like to avoid in the arm-soc tree.

For now, I've changed this to use the GXBB include since the values used
are the same, but we can fix this for good in v4.10-rc, after the GXL
pinctrl changes are merged.

Kevin

[1] [PATCH] pinctrl: meson: Add GXL pinctrl definitions
>  / {
>  	compatible = "amlogic,meson-gxl";
>  };
> +
> +&aobus {
> +	pinctrl_aobus: pinctrl@14 {
> +		compatible = "amlogic,meson-gxl-aobus-pinctrl";
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +
> +		gpio_ao: bank@14 {
> +			reg = <0x0 0x00014 0x0 0x8>,
> +			      <0x0 0x0002c 0x0 0x4>,
> +			      <0x0 0x00024 0x0 0x8>;
> +			reg-names = "mux", "pull", "gpio";
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +		};
> +
> +		uart_ao_a_pins: uart_ao_a {
> +			mux {
> +				groups = "uart_tx_ao_a", "uart_rx_ao_a";
> +				function = "uart_ao";
> +			};
> +		};
> +
> +		remote_input_ao_pins: remote_input_ao {
> +			mux {
> +				groups = "remote_input_ao";
> +				function = "remote_input_ao";
> +			};
> +		};
> +	};
> +};
> +
> +&periphs {
> +	pinctrl_periphs: pinctrl@4b0 {
> +		compatible = "amlogic,meson-gxl-periphs-pinctrl";
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +
> +		gpio: bank@4b0 {
> +			reg = <0x0 0x004b0 0x0 0x28>,
> +			      <0x0 0x004e8 0x0 0x14>,
> +			      <0x0 0x00120 0x0 0x14>,
> +			      <0x0 0x00430 0x0 0x40>;
> +			reg-names = "mux", "pull", "pull-enable", "gpio";
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +		};
> +
> +		emmc_pins: emmc {
> +			mux {
> +				groups = "emmc_nand_d07",
> +				       "emmc_cmd",
> +				       "emmc_clk",
> +				       "emmc_ds";
> +				function = "emmc";
> +			};
> +		};
> +
> +		sdcard_pins: sdcard {
> +			mux {
> +				groups = "sdcard_d0",
> +				       "sdcard_d1",
> +				       "sdcard_d2",
> +				       "sdcard_d3",
> +				       "sdcard_cmd",
> +				       "sdcard_clk";
> +				function = "sdcard";
> +			};
> +		};
> +
> +		sdio_pins: sdio {
> +			mux {
> +				groups = "sdio_d0",
> +				       "sdio_d1",
> +				       "sdio_d2",
> +				       "sdio_d3",
> +				       "sdio_cmd",
> +				       "sdio_clk";
> +				function = "sdio";
> +			};
> +		};
> +
> +		sdio_irq_pins: sdio_irq {
> +			mux {
> +				groups = "sdio_irq";
> +				function = "sdio";
> +			};
> +		};
> +
> +		uart_a_pins: uart_a {
> +			mux {
> +				groups = "uart_tx_a",
> +				       "uart_rx_a";
> +				function = "uart_a";
> +			};
> +		};
> +
> +		uart_b_pins: uart_b {
> +			mux {
> +				groups = "uart_tx_b",
> +				       "uart_rx_b";
> +				function = "uart_b";
> +			};
> +		};
> +
> +		uart_c_pins: uart_c {
> +			mux {
> +				groups = "uart_tx_c",
> +				       "uart_rx_c";
> +				function = "uart_c";
> +			};
> +		};
> +
> +		i2c_a_pins: i2c_a {
> +			mux {
> +				groups = "i2c_sck_a",
> +				     "i2c_sda_a";
> +				function = "i2c_a";
> +			};
> +		};
> +
> +		i2c_b_pins: i2c_b {
> +			mux {
> +				groups = "i2c_sck_b",
> +				      "i2c_sda_b";
> +				function = "i2c_b";
> +			};
> +		};
> +
> +		i2c_c_pins: i2c_c {
> +			mux {
> +				groups = "i2c_sck_c",
> +				      "i2c_sda_c";
> +				function = "i2c_c";
> +			};
> +		};
> +
> +		eth_pins: eth_c {
> +			mux {
> +				groups = "eth_mdio",
> +				       "eth_mdc",
> +				       "eth_clk_rx_clk",
> +				       "eth_rx_dv",
> +				       "eth_rxd0",
> +				       "eth_rxd1",
> +				       "eth_rxd2",
> +				       "eth_rxd3",
> +				       "eth_rgmii_tx_clk",
> +				       "eth_tx_en",
> +				       "eth_txd0",
> +				       "eth_txd1",
> +				       "eth_txd2",
> +				       "eth_txd3";
> +				function = "eth";
> +			};
> +		};
> +
> +		pwm_e_pins: pwm_e {
> +			mux {
> +				groups = "pwm_e";
> +				function = "pwm_e";
> +			};
> +		};
> +	};
> +};

^ permalink raw reply	[flat|nested] 11+ messages in thread

end of thread, other threads:[~2016-11-07 22:30 UTC | newest]

Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-10-31 16:44 [PATCH 0/8] ARM64: dts: meson-gxl: Add extended support Neil Armstrong
2016-10-31 16:44 ` [PATCH 1/8] ARM64: dts: meson-gxbb: Move common nodes to meson-gx Neil Armstrong
2016-10-31 16:44 ` [PATCH 2/8] ARM64: dts: meson-gxl: Add pinctrl nodes Neil Armstrong
2016-11-07 22:30   ` Kevin Hilman
2016-10-31 16:44 ` [PATCH 3/8] ARM64: dts: meson-gxl: Add clock nodes Neil Armstrong
2016-10-31 16:44 ` [PATCH 4/8] ARM64: dts: meson-gxl: Add i2c nodes Neil Armstrong
2016-10-31 16:44 ` [PATCH 5/8] ARM64: dts: meson-gxl: Add MMC/SD/SDIO nodes Neil Armstrong
2016-10-31 16:44 ` [PATCH 6/8] ARM64: dts: meson-gxl-p23x: Add uart pinctrl Neil Armstrong
2016-10-31 16:44 ` [PATCH 7/8] ARM64: dts: meson-gxl-p23x: Add SD/SDIO/MMC and PWM nodes Neil Armstrong
2016-11-05 22:10   ` Kevin Hilman
2016-10-31 16:44 ` [PATCH 8/8] ARM64: dts: meson-gxl-p23x: Enable IR receiver Neil Armstrong

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).