linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Krzysztof Hałasa" <khalasa@piap.pl>
To: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Tim Harvey <tharvey@gateworks.com>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	linux-media@vger.kernel.org, lkml <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH REPOST] TDA1997x: replace video detection routine
Date: Fri, 23 Jul 2021 13:57:06 +0200	[thread overview]
Message-ID: <m3eebpckfh.fsf@t19.piap.pl> (raw)
In-Reply-To: <798b2128-24a6-1a62-f98c-f228134e8d5c@xs4all.nl> (Hans Verkuil's message of "Fri, 23 Jul 2021 10:49:01 +0200")

Hi Hans,

Hans Verkuil <hverkuil@xs4all.nl> writes:

> The tda1997x doesn't have any method of obtaining the sync polarities?
>
> HSync and VSync are, as you say, using in-band signaling, but the 'polarity'
> still matters when it comes to detecting timings. All HDMI receivers I have
> ever seen have a register that reports the polarities. I find it *very* hard
> to imagine that this device doesn't support that.

I didn't know that HDMI serializers send the logical levels of those
lines, I thought some frame/field/line start/end codes are sent instead.
I will have to have a closer look at this chip, then.

> Do you have a datasheet for this device?

No, there is only the current driver and also the old one (in Gateworks'
Freescale/NXP kernel). Tim may have something perhaps under NDA, maaybe.

I will see if I can find these bits in the registers.

Thanks.
-- 
Krzysztof "Chris" Hałasa

Sieć Badawcza Łukasiewicz
Przemysłowy Instytut Automatyki i Pomiarów PIAP
Al. Jerozolimskie 202, 02-486 Warszawa

      reply	other threads:[~2021-07-23 11:57 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-19  9:30 [PATCH REPOST] TDA1997x: replace video detection routine Krzysztof Hałasa
2021-07-21  7:12 ` Hans Verkuil
2021-07-21  7:56   ` Krzysztof Hałasa
2021-07-21 10:04     ` Hans Verkuil
2021-07-22  6:27   ` Krzysztof Hałasa
2021-07-22  6:43     ` Krzysztof Hałasa
2021-07-23  8:24       ` Hans Verkuil
2021-07-23  8:49     ` Hans Verkuil
2021-07-23 11:57       ` Krzysztof Hałasa [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=m3eebpckfh.fsf@t19.piap.pl \
    --to=khalasa@piap.pl \
    --cc=hverkuil@xs4all.nl \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=tharvey@gateworks.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).