linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Palmer Dabbelt <palmer@dabbelt.com>
To: abdulras@google.com
Cc: linux-riscv@lists.infradead.org, linux-kernel@vger.kernel.org,
	nathan@kernel.org, ndesaulniers@google.com, morbo@google.com,
	clang-built-linux@googlegroups.com, abdulras@google.com
Subject: Re: [PATCH v3] riscv: explicitly use symbol offsets for VDSO
Date: Tue, 24 Aug 2021 21:54:35 -0700 (PDT)	[thread overview]
Message-ID: <mhng-a7fbcae6-db7b-48d5-808f-3f8eff233ea9@palmerdabbelt-glaptop> (raw)
In-Reply-To: <20210804173214.1027994-1-abdulras@google.com>

On Wed, 04 Aug 2021 10:32:14 PDT (-0700), abdulras@google.com wrote:
> The current implementation of the `__rt_sigaction` reference computed an
> absolute offset relative to the mapped base of the VDSO.  While this can
> be handled in the medlow model, the medany model cannot handle this as
> it is meant to be position independent.  The current implementation
> relied on the BFD linker relaxing the PC-relative relocation into an
> absolute relocation as it was a near-zero address allowing it to be
> referenced relative to `zero`.
>
> We now extract the offsets and create a generated header allowing the
> build with LLVM and lld to succeed as we no longer depend on the linker
> rewriting address references near zero.  This change was largely
> modelled after the ARM64 target which does something similar.
>
> Signed-off-by: Saleem Abdulrasool <abdulras@google.com>
> ---
>  arch/riscv/Makefile                        |  4 ++++
>  arch/riscv/include/asm/vdso.h              | 14 ++----------
>  arch/riscv/kernel/vdso/Makefile            | 25 ++++++++++------------
>  arch/riscv/kernel/vdso/gen_vdso_offsets.sh |  5 +++++
>  arch/riscv/kernel/vdso/so2s.sh             |  6 ------
>  5 files changed, 22 insertions(+), 32 deletions(-)
>  create mode 100755 arch/riscv/kernel/vdso/gen_vdso_offsets.sh
>  delete mode 100755 arch/riscv/kernel/vdso/so2s.sh
>
> diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
> index bc74afdbf31e..e026b2d0a5a4 100644
> --- a/arch/riscv/Makefile
> +++ b/arch/riscv/Makefile
> @@ -108,6 +108,10 @@ PHONY += vdso_install
>  vdso_install:
>  	$(Q)$(MAKE) $(build)=arch/riscv/kernel/vdso $@
>
> +prepare: vdso_prepare
> +vdso_prepare: prepare0
> +	$(Q)$(MAKE) $(build)=arch/riscv/kernel/vdso include/generated/vdso-offsets.h
> +
>  ifneq ($(CONFIG_XIP_KERNEL),y)
>  ifeq ($(CONFIG_RISCV_M_MODE)$(CONFIG_SOC_CANAAN),yy)
>  KBUILD_IMAGE := $(boot)/loader.bin
> diff --git a/arch/riscv/include/asm/vdso.h b/arch/riscv/include/asm/vdso.h
> index 1453a2f563bc..d8d003c2b5a3 100644
> --- a/arch/riscv/include/asm/vdso.h
> +++ b/arch/riscv/include/asm/vdso.h
> @@ -9,25 +9,15 @@
>  #define _ASM_RISCV_VDSO_H
>
>  #include <linux/types.h>
> +#include <generated/vdso-offsets.h>
>
>  #ifndef CONFIG_GENERIC_TIME_VSYSCALL
>  struct vdso_data {
>  };
>  #endif
>
> -/*
> - * The VDSO symbols are mapped into Linux so we can just use regular symbol
> - * addressing to get their offsets in userspace.  The symbols are mapped at an
> - * offset of 0, but since the linker must support setting weak undefined
> - * symbols to the absolute address 0 it also happens to support other low
> - * addresses even when the code model suggests those low addresses would not
> - * otherwise be availiable.
> - */
>  #define VDSO_SYMBOL(base, name)							\
> -({										\
> -	extern const char __vdso_##name[];					\
> -	(void __user *)((unsigned long)(base) + __vdso_##name);			\
> -})
> +	(void __user *)((unsigned long)(base) + __vdso_##name##_offset)
>
>  asmlinkage long sys_riscv_flush_icache(uintptr_t, uintptr_t, uintptr_t);
>
> diff --git a/arch/riscv/kernel/vdso/Makefile b/arch/riscv/kernel/vdso/Makefile
> index 24d936c147cd..f8cb9144a284 100644
> --- a/arch/riscv/kernel/vdso/Makefile
> +++ b/arch/riscv/kernel/vdso/Makefile
> @@ -23,10 +23,10 @@ ifneq ($(c-gettimeofday-y),)
>  endif
>
>  # Build rules
> -targets := $(obj-vdso) vdso.so vdso.so.dbg vdso.lds vdso-syms.S
> +targets := $(obj-vdso) vdso.so vdso.so.dbg vdso.lds
>  obj-vdso := $(addprefix $(obj)/, $(obj-vdso))
>
> -obj-y += vdso.o vdso-syms.o
> +obj-y += vdso.o
>  CPPFLAGS_vdso.lds += -P -C -U$(ARCH)
>
>  # Disable -pg to prevent insert call site
> @@ -43,20 +43,22 @@ $(obj)/vdso.o: $(obj)/vdso.so
>  # link rule for the .so file, .lds has to be first
>  $(obj)/vdso.so.dbg: $(obj)/vdso.lds $(obj-vdso) FORCE
>  	$(call if_changed,vdsold)
> -LDFLAGS_vdso.so.dbg = -shared -s -soname=linux-vdso.so.1 \
> +LDFLAGS_vdso.so.dbg = -shared -S -soname=linux-vdso.so.1 \
>  	--build-id=sha1 --hash-style=both --eh-frame-hdr
>
> -# We also create a special relocatable object that should mirror the symbol
> -# table and layout of the linked DSO. With ld --just-symbols we can then
> -# refer to these symbols in the kernel code rather than hand-coded addresses.
> -$(obj)/vdso-syms.S: $(obj)/vdso.so FORCE
> -	$(call if_changed,so2s)
> -
>  # strip rule for the .so file
>  $(obj)/%.so: OBJCOPYFLAGS := -S
>  $(obj)/%.so: $(obj)/%.so.dbg FORCE
>  	$(call if_changed,objcopy)
>
> +# Generate VDSO offsets using helper script
> +gen-vdsosym := $(srctree)/$(src)/gen_vdso_offsets.sh
> +quiet_cmd_vdsosym = VDSOSYM $@
> +	cmd_vdsosym = $(NM) $< | $(gen-vdsosym) | LC_ALL=C sort > $@
> +
> +include/generated/vdso-offsets.h: $(obj)/vdso.so.dbg FORCE
> +	$(call if_changed,vdsosym)
> +
>  # actual build commands
>  # The DSO images are built using a special linker script
>  # Make sure only to export the intended __vdso_xxx symbol offsets.
> @@ -65,11 +67,6 @@ quiet_cmd_vdsold = VDSOLD  $@
>                     $(OBJCOPY) $(patsubst %, -G __vdso_%, $(vdso-syms)) $@.tmp $@ && \
>                     rm $@.tmp
>
> -# Extracts symbol offsets from the VDSO, converting them into an assembly file
> -# that contains the same symbols at the same offsets.
> -quiet_cmd_so2s = SO2S    $@
> -      cmd_so2s = $(NM) -D $< | $(srctree)/$(src)/so2s.sh > $@
> -
>  # install commands for the unstripped file
>  quiet_cmd_vdso_install = INSTALL $@
>        cmd_vdso_install = cp $(obj)/$@.dbg $(MODLIB)/vdso/$@
> diff --git a/arch/riscv/kernel/vdso/gen_vdso_offsets.sh b/arch/riscv/kernel/vdso/gen_vdso_offsets.sh
> new file mode 100755
> index 000000000000..c2e5613f3495
> --- /dev/null
> +++ b/arch/riscv/kernel/vdso/gen_vdso_offsets.sh
> @@ -0,0 +1,5 @@
> +#!/bin/sh
> +# SPDX-License-Identifier: GPL-2.0
> +
> +LC_ALL=C
> +sed -n -e 's/^[0]\+\(0[0-9a-fA-F]*\) . \(__vdso_[a-zA-Z0-9_]*\)$/\#define \2_offset\t0x\1/p'
> diff --git a/arch/riscv/kernel/vdso/so2s.sh b/arch/riscv/kernel/vdso/so2s.sh
> deleted file mode 100755
> index e64cb6d9440e..000000000000
> --- a/arch/riscv/kernel/vdso/so2s.sh
> +++ /dev/null
> @@ -1,6 +0,0 @@
> -#!/bin/sh
> -# SPDX-License-Identifier: GPL-2.0+
> -# Copyright 2020 Palmer Dabbelt <palmerdabbelt@google.com>
> -
> -sed 's!\([0-9a-f]*\) T \([a-z0-9_]*\)\(@@LINUX_4.15\)*!.global \2\n.set \2,0x\1!' \
> -| grep '^\.'

This is on for-next.  Thanks!

  parent reply	other threads:[~2021-08-25  4:54 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-04 17:32 Saleem Abdulrasool
2021-08-05 18:44 ` Nathan Chancellor
2021-08-25  4:54 ` Palmer Dabbelt [this message]
2021-10-27 14:50 ` Andreas Schwab
2021-11-02 15:51 ` [PATCH] riscv: fix building external modules Andreas Schwab
2021-11-02 16:48   ` Nathan Chancellor
2021-11-19  7:11   ` Palmer Dabbelt

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=mhng-a7fbcae6-db7b-48d5-808f-3f8eff233ea9@palmerdabbelt-glaptop \
    --to=palmer@dabbelt.com \
    --cc=abdulras@google.com \
    --cc=clang-built-linux@googlegroups.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=morbo@google.com \
    --cc=nathan@kernel.org \
    --cc=ndesaulniers@google.com \
    --subject='Re: [PATCH v3] riscv: explicitly use symbol offsets for VDSO' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).