From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 0B77EC7EE22 for ; Sat, 6 May 2023 21:07:40 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229787AbjEFVHh (ORCPT ); Sat, 6 May 2023 17:07:37 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:42574 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229446AbjEFVHf (ORCPT ); Sat, 6 May 2023 17:07:35 -0400 Received: from mx0a-0031df01.pphosted.com (mx0a-0031df01.pphosted.com [205.220.168.131]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 47AB711D97; Sat, 6 May 2023 14:07:30 -0700 (PDT) Received: from pps.filterd (m0279866.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.19/8.17.1.19) with ESMTP id 346L63IY016565; Sat, 6 May 2023 21:07:16 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h=date : from : to : cc : subject : message-id : references : mime-version : content-type : in-reply-to; s=qcppdkim1; bh=faynnSNWQYPoCmmV42zJL//bVLVclo7eWkVTypfuagk=; b=UNEAYDOP0PYsaVKS4a/GM23WSpLTy9Jav+U/HwdKmRzWty9/kevfTcMBoYa6oEhFlnF2 Rx/ozcLW6OT0b9u9rTav4klCGX4pA9p1OuHhQuTS9JYlN0SIpOUWhF1Y+rEBid3zB2Rg MpLYHRifKwIO/jqZvViRTw3n7Ubo0ZKI/IlufXZX06HhqRuGrpSkQKPFLGm9dAp60KjY LdUSH+0Y9DiW+n20fZrk20zgF4VQ+O6Bn6Pmfy7PlzoO4yozbXiTwle4LvF+OOF0Y3XE jESUZuAjNqEhtXHMoVDAaSDTz3JIN7RZ1hnGq64rqG1vxyC0+FnTZ2N5Tuk8CyzzeSXh +w== Received: from nalasppmta01.qualcomm.com (Global_NAT1.qualcomm.com [129.46.96.20]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3qdg6hgvae-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Sat, 06 May 2023 21:07:16 +0000 Received: from nalasex01a.na.qualcomm.com (nalasex01a.na.qualcomm.com [10.47.209.196]) by NALASPPMTA01.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTPS id 346L7F47031800 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Sat, 6 May 2023 21:07:15 GMT Received: from akhilpo-linux.qualcomm.com (10.80.80.8) by nalasex01a.na.qualcomm.com (10.47.209.196) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.42; Sat, 6 May 2023 14:07:09 -0700 Date: Sun, 7 May 2023 02:37:06 +0530 From: Akhil P Oommen To: Konrad Dybcio CC: Rob Clark , , "Daniel Vetter" , , Bjorn Andersson , Konrad Dybcio , "Abhinav Kumar" , , , Rob Clark , Rob Herring , Krzysztof Kozlowski , , "Dmitry Baryshkov" , Marijn Suijten , David Airlie , Sean Paul Subject: Re: [Freedreno] [PATCH v6 06/15] drm/msm/a6xx: Introduce GMU wrapper support Message-ID: References: <20230223-topic-gmuwrapper-v6-0-2034115bb60c@linaro.org> <20230223-topic-gmuwrapper-v6-6-2034115bb60c@linaro.org> <20230502074956.GA21869@akhilpo-linux.qualcomm.com> <20230503203236.GA1177@akhilpo-linux.qualcomm.com> <8fc74f8e-726b-501c-6800-0bd515d4181a@linaro.org> <64zeocdcctdlgqmrdz2x7diy7ihhn6rr6w5mpc4irpfmemob5i@2mky6fwvavxn> <693cd4be-9d31-a511-a523-d3e5eae501ae@linaro.org> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Disposition: inline In-Reply-To: X-Originating-IP: [10.80.80.8] X-ClientProxiedBy: nasanex01b.na.qualcomm.com (10.46.141.250) To nalasex01a.na.qualcomm.com (10.47.209.196) X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-GUID: N70374PANbofJQlQ0r_A1y0ujcyt73SC X-Proofpoint-ORIG-GUID: N70374PANbofJQlQ0r_A1y0ujcyt73SC X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.254,Aquarius:18.0.942,Hydra:6.0.573,FMLib:17.11.170.22 definitions=2023-05-06_13,2023-05-05_01,2023-02-09_01 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 clxscore=1015 impostorscore=0 suspectscore=0 malwarescore=0 lowpriorityscore=0 mlxscore=0 mlxlogscore=999 spamscore=0 bulkscore=0 adultscore=0 phishscore=0 priorityscore=1501 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2303200000 definitions=main-2305060165 Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Sun, May 07, 2023 at 02:16:36AM +0530, Akhil P Oommen wrote: > On Sat, May 06, 2023 at 08:16:21PM +0530, Akhil P Oommen wrote: > > On Fri, May 05, 2023 at 12:35:18PM +0200, Konrad Dybcio wrote: > > > > > > > > > On 5.05.2023 10:46, Akhil P Oommen wrote: > > > > On Thu, May 04, 2023 at 08:34:07AM +0200, Konrad Dybcio wrote: > > > >> > > > >> > > > >> On 3.05.2023 22:32, Akhil P Oommen wrote: > > > >>> On Tue, May 02, 2023 at 11:40:26AM +0200, Konrad Dybcio wrote: > > > >>>> > > > >>>> > > > >>>> On 2.05.2023 09:49, Akhil P Oommen wrote: > > > >>>>> On Sat, Apr 01, 2023 at 01:54:43PM +0200, Konrad Dybcio wrote: > > > >>>>>> Some (particularly SMD_RPM, a.k.a non-RPMh) SoCs implement A6XX GPUs > > > >>>>>> but don't implement the associated GMUs. This is due to the fact that > > > >>>>>> the GMU directly pokes at RPMh. Sadly, this means we have to take care > > > >>>>>> of enabling & scaling power rails, clocks and bandwidth ourselves. > > > >>>>>> > > > >>>>>> Reuse existing Adreno-common code and modify the deeply-GMU-infused > > > >>>>>> A6XX code to facilitate these GPUs. This involves if-ing out lots > > > >>>>>> of GMU callbacks and introducing a new type of GMU - GMU wrapper (it's > > > >>>>>> the actual name that Qualcomm uses in their downstream kernels). > > > >>>>>> > > > >>>>>> This is essentially a register region which is convenient to model > > > >>>>>> as a device. We'll use it for managing the GDSCs. The register > > > >>>>>> layout matches the actual GMU_CX/GX regions on the "real GMU" devices > > > >>>>>> and lets us reuse quite a bit of gmu_read/write/rmw calls. > > > >>>>> << I sent a reply to this patch earlier, but not sure where it went. > > > >>>>> Still figuring out Mutt... >> > > > >>>> Answered it here: > > > >>>> > > > >>>> https://lore.kernel.org/linux-arm-msm/4d3000c1-c3f9-0bfd-3eb3-23393f9a8f77@linaro.org/ > > > >>> > > > >>> Thanks. Will check and respond there if needed. > > > >>> > > > >>>> > > > >>>> I don't think I see any new comments in this "reply revision" (heh), so please > > > >>>> check that one out. > > > >>>> > > > >>>>> > > > >>>>> Only convenience I found is that we can reuse gmu register ops in a few > > > >>>>> places (< 10 I think). If we just model this as another gpu memory > > > >>>>> region, I think it will help to keep gmu vs gmu-wrapper/no-gmu > > > >>>>> architecture code with clean separation. Also, it looks like we need to > > > >>>>> keep a dummy gmu platform device in the devicetree with the current > > > >>>>> approach. That doesn't sound right. > > > >>>> That's correct, but.. if we switch away from that, VDD_GX/VDD_CX will > > > >>>> need additional, gmuwrapper-configuration specific code anyway, as > > > >>>> OPP & genpd will no longer make use of the default behavior which > > > >>>> only gets triggered if there's a single power-domains=<> entry, afaicu. > > > >>> Can you please tell me which specific *default behviour* do you mean here? > > > >>> I am curious to know what I am overlooking here. We can always get a cxpd/gxpd device > > > >>> and vote for the gdscs directly from the driver. Anything related to > > > >>> OPP? > > > >> I *believe* this is true: > > > >> > > > >> if (ARRAY_SIZE(power-domains) == 1) { > > > >> of generic code will enable the power domain at .probe time > > > > we need to handle the voting directly. I recently shared a patch to > > > > vote cx gdsc from gpu driver. Maybe we can ignore this when gpu has > > > > only cx rail due to this logic you quoted here. > > > > > > > > I see that you have handled it mostly correctly from the gpu driver in the updated > > > > a6xx_pm_suspend() callback. Just the power domain device ptrs should be moved to > > > > gpu from gmu. > > > > > > > >> > > > >> opp APIs will default to scaling that domain with required-opps > > > > > > > >> } > > > >> > > > >> and we do need to put GX/CX (with an MX parent to match) there, as the > > > >> AP is responsible for voting in this configuration > > > > > > > > We should vote to turn ON gx/cx headswitches through genpd from gpu driver. When you vote for > > > > core clk frequency, *clock driver is supposed to scale* all the necessary > > > > regulators. At least that is how downstream works. You can refer the downstream > > > > gpucc clk driver of these SoCs. I am not sure how much of that can be easily converted to > > > > upstream. > > > > > > > > Also, how does having a gmu dt node help in this regard? Feel free to > > > > elaborate, I am not very familiar with clk/regulator implementations. > > > Okay so I think we have a bit of a confusion here. > > > > > > Currently, with this patchset we manage things like this: > > > > > > 1. GPU has a VDD_GX (or equivalent[1]) line passed in power-domains=<>, which > > > is then used with OPP APIs to ensure it's being scaled on freq change [2]. > > > The VDD_lines coming from RPM(h) are described as power domains upstream > > > *unlike downstream*, which represents them as regulators with preset voltage > > > steps (and perhaps that's what had you confused). What's more is that GDSCs > > > are also modeled as genpds instead of regulators, hence they sort of "fight" > > > for the spot in power-domains=<> of a given node. > > > > Thanks for clarifying. I didn't get this part "hence they sort of "fight" for the spot in power-domains". > > What spot exactly did you mean here? The spot for PD to be used during scaling? > > > > It seems like you are hinting that there is some sort of limitation in keeping all the > > 3 power domains (cx gdsc, gx gdsc and cx rail) under the gpu node in dt. Please explain > > Typo. I meant "(Cx gdsc, Gx gdsc and Gx/Cx rail)" > > > why we can't keep all the 3 power domains under gpu node and call an API > > (devm_pm_opp_attach_genpd() ??) to select the power domain which should be scaled? > > > > > > > > 2. GMU wrapper gets CX_GDSC & GX_GDSC handles in power-domains=<> (just like > > > the real GMU in the current state of upstream [3]), which are then governed > > > through explicit genpd calls to turn them on/off when the GPU resume/suspend/ > > > crash recovery functions are called. > > > > > > 3. GPUs with GMU, like A630, don't get any power-domains=<> entries in DT, > > > instead relying on the GMU firmware to communicate necessary requests > > > to the VDD_xyz resources directly to RPMh, as part of the DVFS routines. > > > If GMU wasn't so smart, we would have to do the exact same VDD_xyz+OPP dance > > > there - that's precisely what's going on under the hood. > > > > > > 4. Adreno SMMU gets a handle to CX_GDSC so that when OF probe funcs are called, > > > (and SMMUs probe way way before all things drm) the headswitch is de-asserted > > > and its registers and related clocks are accessible. > > > > > > > > > All this makes me believe the way I generally architected things in > > > this series is correct. > > > > > > > > > [1] A610 (and I think A612) lack a VDD_GX line, so they power the GPU from > > > VDD_CX, but that's just an implementation detail which is handled by > > > simply passing the correct one in DTS, the code doesn't care. > > > > > > [2] Hence my recent changes to use dev_pm_opp_set_rate() wherever possible, > > > this func reads requires-opps in OPP table entries and ensures to elevate > > > the GENPD's performance state before switching frequencies > > > > > > [3] Please take a look at the "end product" here: > > > https://github.com/SoMainline/linux/commit/fb16757c3bf4c087ac597d70c7a98755d46bb323 > > > you can open e.g. sdm845.dtsi for comparison with real GMU > > > > This dt definition for a610 gpu clearly shows the issue I have here. Someone > > looking at this gets a very wrong picture about the platform like there is actually nothing > > resembling a gmu IP in a610. Is gmu or gmu-cx register region really present in this hw? > > > > Just a side note about the dt file you shared: > > 1. At line: 1243, It shouldn't have gx gdsc, right? ignore this one too. It can still have a gx gdsc. > > 2. At line: 1172, SM6115_VDDCX -> SM6115_VDDGX? > Aah! ignore this. this gpu doesn't have Gx rail. > > -Akhil > > > > -Akhil > > > > > > > > I hope this answers your concerns. If not, I'll be happy to elaborate. > > > > > > Konrad > > > > > > > > -Akhil. > > > >> > > > >> Konrad > > > >>> > > > >>> -Akhil > > > >>>> > > > >>>> If nothing else, this is a very convenient way to model a part of the > > > >>>> GPU (as that's essentially what GMU_CX is, to my understanding) and > > > >>>> the bindings people didn't shoot me in the head for proposing this, so > > > >>>> I assume it'd be cool to pursue this.. > > > >>>> > > > >>>> Konrad > > > >>>>>> > > > >>>>>> Signed-off-by: Konrad Dybcio > > > >>>>>> --- > > > >>>>>> drivers/gpu/drm/msm/adreno/a6xx_gmu.c | 72 +++++++- > > > >>>>>> drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 255 +++++++++++++++++++++++++--- > > > >>>>>> drivers/gpu/drm/msm/adreno/a6xx_gpu.h | 1 + > > > >>>>>> drivers/gpu/drm/msm/adreno/a6xx_gpu_state.c | 14 +- > > > >>>>>> drivers/gpu/drm/msm/adreno/adreno_gpu.c | 8 +- > > > >>>>>> drivers/gpu/drm/msm/adreno/adreno_gpu.h | 6 + > > > >>>>>> 6 files changed, 318 insertions(+), 38 deletions(-) > > > >>>>>> > > > >>>>>> diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gmu.c b/drivers/gpu/drm/msm/adreno/a6xx_gmu.c > > > >>>>>> index 87babbb2a19f..b1acdb027205 100644 > > > >>>>>> --- a/drivers/gpu/drm/msm/adreno/a6xx_gmu.c > > > >>>>>> +++ b/drivers/gpu/drm/msm/adreno/a6xx_gmu.c > > > >>>>>> @@ -1469,6 +1469,7 @@ static int a6xx_gmu_get_irq(struct a6xx_gmu *gmu, struct platform_device *pdev, > > > >>>>>> > > > >>>>>> void a6xx_gmu_remove(struct a6xx_gpu *a6xx_gpu) > > > >>>>>> { > > > >>>>>> + struct adreno_gpu *adreno_gpu = &a6xx_gpu->base; > > > >>>>>> struct a6xx_gmu *gmu = &a6xx_gpu->gmu; > > > >>>>>> struct platform_device *pdev = to_platform_device(gmu->dev); > > > >>>>>> > > > >>>>>> @@ -1494,10 +1495,12 @@ void a6xx_gmu_remove(struct a6xx_gpu *a6xx_gpu) > > > >>>>>> gmu->mmio = NULL; > > > >>>>>> gmu->rscc = NULL; > > > >>>>>> > > > >>>>>> - a6xx_gmu_memory_free(gmu); > > > >>>>>> + if (!adreno_has_gmu_wrapper(adreno_gpu)) { > > > >>>>>> + a6xx_gmu_memory_free(gmu); > > > >>>>>> > > > >>>>>> - free_irq(gmu->gmu_irq, gmu); > > > >>>>>> - free_irq(gmu->hfi_irq, gmu); > > > >>>>>> + free_irq(gmu->gmu_irq, gmu); > > > >>>>>> + free_irq(gmu->hfi_irq, gmu); > > > >>>>>> + } > > > >>>>>> > > > >>>>>> /* Drop reference taken in of_find_device_by_node */ > > > >>>>>> put_device(gmu->dev); > > > >>>>>> @@ -1516,6 +1519,69 @@ static int cxpd_notifier_cb(struct notifier_block *nb, > > > >>>>>> return 0; > > > >>>>>> } > > > >>>>>> > > > >>>>>> +int a6xx_gmu_wrapper_init(struct a6xx_gpu *a6xx_gpu, struct device_node *node) > > > >>>>>> +{ > > > >>>>>> + struct platform_device *pdev = of_find_device_by_node(node); > > > >>>>>> + struct a6xx_gmu *gmu = &a6xx_gpu->gmu; > > > >>>>>> + int ret; > > > >>>>>> + > > > >>>>>> + if (!pdev) > > > >>>>>> + return -ENODEV; > > > >>>>>> + > > > >>>>>> + gmu->dev = &pdev->dev; > > > >>>>>> + > > > >>>>>> + of_dma_configure(gmu->dev, node, true); > > > >>>>> why setup dma for a device that is not actually present? > > > >>>>>> + > > > >>>>>> + pm_runtime_enable(gmu->dev); > > > >>>>>> + > > > >>>>>> + /* Mark legacy for manual SPTPRAC control */ > > > >>>>>> + gmu->legacy = true; > > > >>>>>> + > > > >>>>>> + /* Map the GMU registers */ > > > >>>>>> + gmu->mmio = a6xx_gmu_get_mmio(pdev, "gmu"); > > > >>>>>> + if (IS_ERR(gmu->mmio)) { > > > >>>>>> + ret = PTR_ERR(gmu->mmio); > > > >>>>>> + goto err_mmio; > > > >>>>>> + } > > > >>>>>> + > > > >>>>>> + gmu->cxpd = dev_pm_domain_attach_by_name(gmu->dev, "cx"); > > > >>>>>> + if (IS_ERR(gmu->cxpd)) { > > > >>>>>> + ret = PTR_ERR(gmu->cxpd); > > > >>>>>> + goto err_mmio; > > > >>>>>> + } > > > >>>>>> + > > > >>>>>> + if (!device_link_add(gmu->dev, gmu->cxpd, DL_FLAG_PM_RUNTIME)) { > > > >>>>>> + ret = -ENODEV; > > > >>>>>> + goto detach_cxpd; > > > >>>>>> + } > > > >>>>>> + > > > >>>>>> + init_completion(&gmu->pd_gate); > > > >>>>>> + complete_all(&gmu->pd_gate); > > > >>>>>> + gmu->pd_nb.notifier_call = cxpd_notifier_cb; > > > >>>>>> + > > > >>>>>> + /* Get a link to the GX power domain to reset the GPU */ > > > >>>>>> + gmu->gxpd = dev_pm_domain_attach_by_name(gmu->dev, "gx"); > > > >>>>>> + if (IS_ERR(gmu->gxpd)) { > > > >>>>>> + ret = PTR_ERR(gmu->gxpd); > > > >>>>>> + goto err_mmio; > > > >>>>>> + } > > > >>>>>> + > > > >>>>>> + gmu->initialized = true; > > > >>>>>> + > > > >>>>>> + return 0; > > > >>>>>> + > > > >>>>>> +detach_cxpd: > > > >>>>>> + dev_pm_domain_detach(gmu->cxpd, false); > > > >>>>>> + > > > >>>>>> +err_mmio: > > > >>>>>> + iounmap(gmu->mmio); > > > >>>>>> + > > > >>>>>> + /* Drop reference taken in of_find_device_by_node */ > > > >>>>>> + put_device(gmu->dev); > > > >>>>>> + > > > >>>>>> + return ret; > > > >>>>>> +} > > > >>>>>> + > > > >>>>>> int a6xx_gmu_init(struct a6xx_gpu *a6xx_gpu, struct device_node *node) > > > >>>>>> { > > > >>>>>> struct adreno_gpu *adreno_gpu = &a6xx_gpu->base; > > > >>>>>> diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c > > > >>>>>> index 931f9f3b3a85..8e0345ffab81 100644 > > > >>>>>> --- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c > > > >>>>>> +++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c > > > >>>>>> @@ -20,9 +20,11 @@ static inline bool _a6xx_check_idle(struct msm_gpu *gpu) > > > >>>>>> struct adreno_gpu *adreno_gpu = to_adreno_gpu(gpu); > > > >>>>>> struct a6xx_gpu *a6xx_gpu = to_a6xx_gpu(adreno_gpu); > > > >>>>>> > > > >>>>>> - /* Check that the GMU is idle */ > > > >>>>>> - if (!a6xx_gmu_isidle(&a6xx_gpu->gmu)) > > > >>>>>> - return false; > > > >>>>>> + if (!adreno_has_gmu_wrapper(adreno_gpu)) { > > > >>>>>> + /* Check that the GMU is idle */ > > > >>>>>> + if (!a6xx_gmu_isidle(&a6xx_gpu->gmu)) > > > >>>>>> + return false; > > > >>>>>> + } > > > >>>>>> > > > >>>>>> /* Check tha the CX master is idle */ > > > >>>>>> if (gpu_read(gpu, REG_A6XX_RBBM_STATUS) & > > > >>>>>> @@ -612,13 +614,15 @@ static void a6xx_set_hwcg(struct msm_gpu *gpu, bool state) > > > >>>>>> return; > > > >>>>>> > > > >>>>>> /* Disable SP clock before programming HWCG registers */ > > > >>>>>> - gmu_rmw(gmu, REG_A6XX_GPU_GMU_GX_SPTPRAC_CLOCK_CONTROL, 1, 0); > > > >>>>>> + if (!adreno_has_gmu_wrapper(adreno_gpu)) > > > >>>>>> + gmu_rmw(gmu, REG_A6XX_GPU_GMU_GX_SPTPRAC_CLOCK_CONTROL, 1, 0); > > > >>>>>> > > > >>>>>> for (i = 0; (reg = &adreno_gpu->info->hwcg[i], reg->offset); i++) > > > >>>>>> gpu_write(gpu, reg->offset, state ? reg->value : 0); > > > >>>>>> > > > >>>>>> /* Enable SP clock */ > > > >>>>>> - gmu_rmw(gmu, REG_A6XX_GPU_GMU_GX_SPTPRAC_CLOCK_CONTROL, 0, 1); > > > >>>>>> + if (!adreno_has_gmu_wrapper(adreno_gpu)) > > > >>>>>> + gmu_rmw(gmu, REG_A6XX_GPU_GMU_GX_SPTPRAC_CLOCK_CONTROL, 0, 1); > > > >>>>>> > > > >>>>>> gpu_write(gpu, REG_A6XX_RBBM_CLOCK_CNTL, state ? clock_cntl_on : 0); > > > >>>>>> } > > > >>>>>> @@ -1018,10 +1022,13 @@ static int hw_init(struct msm_gpu *gpu) > > > >>>>>> { > > > >>>>>> struct adreno_gpu *adreno_gpu = to_adreno_gpu(gpu); > > > >>>>>> struct a6xx_gpu *a6xx_gpu = to_a6xx_gpu(adreno_gpu); > > > >>>>>> + struct a6xx_gmu *gmu = &a6xx_gpu->gmu; > > > >>>>>> int ret; > > > >>>>>> > > > >>>>>> - /* Make sure the GMU keeps the GPU on while we set it up */ > > > >>>>>> - a6xx_gmu_set_oob(&a6xx_gpu->gmu, GMU_OOB_GPU_SET); > > > >>>>>> + if (!adreno_has_gmu_wrapper(adreno_gpu)) { > > > >>>>>> + /* Make sure the GMU keeps the GPU on while we set it up */ > > > >>>>>> + a6xx_gmu_set_oob(&a6xx_gpu->gmu, GMU_OOB_GPU_SET); > > > >>>>>> + } > > > >>>>>> > > > >>>>>> /* Clear GBIF halt in case GX domain was not collapsed */ > > > >>>>>> if (a6xx_has_gbif(adreno_gpu)) > > > >>>>>> @@ -1144,6 +1151,17 @@ static int hw_init(struct msm_gpu *gpu) > > > >>>>>> 0x3f0243f0); > > > >>>>>> } > > > >>>>>> > > > >>>>>> + if (adreno_has_gmu_wrapper(adreno_gpu)) { > > > >>>>>> + /* Do it here, as GMU wrapper only inits the GMU for memory reservation etc. */ > > > >>>>>> + > > > >>>>>> + /* Set up the CX GMU counter 0 to count busy ticks */ > > > >>>>>> + gmu_write(gmu, REG_A6XX_GPU_GMU_AO_GPU_CX_BUSY_MASK, 0xff000000); > > > >>>>>> + > > > >>>>>> + /* Enable power counter 0 */ > > > >>>>>> + gmu_rmw(gmu, REG_A6XX_GMU_CX_GMU_POWER_COUNTER_SELECT_0, 0xff, BIT(5)); > > > >>>>>> + gmu_write(gmu, REG_A6XX_GMU_CX_GMU_POWER_COUNTER_ENABLE, 1); > > > >>>>>> + } > > > >>>>>> + > > > >>>>>> /* Protect registers from the CP */ > > > >>>>>> a6xx_set_cp_protect(gpu); > > > >>>>>> > > > >>>>>> @@ -1233,6 +1251,8 @@ static int hw_init(struct msm_gpu *gpu) > > > >>>>>> } > > > >>>>>> > > > >>>>>> out: > > > >>>>>> + if (adreno_has_gmu_wrapper(adreno_gpu)) > > > >>>>>> + return ret; > > > >>>>>> /* > > > >>>>>> * Tell the GMU that we are done touching the GPU and it can start power > > > >>>>>> * management > > > >>>>>> @@ -1267,6 +1287,9 @@ static void a6xx_dump(struct msm_gpu *gpu) > > > >>>>>> adreno_dump(gpu); > > > >>>>>> } > > > >>>>>> > > > >>>>>> +#define GBIF_GX_HALT_MASK BIT(0) > > > >>>>>> +#define GBIF_CLIENT_HALT_MASK BIT(0) > > > >>>>>> +#define GBIF_ARB_HALT_MASK BIT(1) > > > >>>>>> #define VBIF_RESET_ACK_TIMEOUT 100 > > > >>>>>> #define VBIF_RESET_ACK_MASK 0x00f0 > > > >>>>>> > > > >>>>>> @@ -1299,7 +1322,8 @@ static void a6xx_recover(struct msm_gpu *gpu) > > > >>>>>> * Turn off keep alive that might have been enabled by the hang > > > >>>>>> * interrupt > > > >>>>>> */ > > > >>>>>> - gmu_write(&a6xx_gpu->gmu, REG_A6XX_GMU_GMU_PWR_COL_KEEPALIVE, 0); > > > >>>>>> + if (!adreno_has_gmu_wrapper(adreno_gpu)) > > > >>>>>> + gmu_write(&a6xx_gpu->gmu, REG_A6XX_GMU_GMU_PWR_COL_KEEPALIVE, 0); > > > >>>>> > > > >>>>> Maybe it is better to move this to a6xx_gmu_force_power_off. > > > >>>>> > > > >>>>>> > > > >>>>>> pm_runtime_dont_use_autosuspend(&gpu->pdev->dev); > > > >>>>>> > > > >>>>>> @@ -1329,6 +1353,32 @@ static void a6xx_recover(struct msm_gpu *gpu) > > > >>>>>> > > > >>>>>> dev_pm_genpd_remove_notifier(gmu->cxpd); > > > >>>>>> > > > >>>>>> + /* Software-reset the GPU */ > > > >>>>> > > > >>>>> This is not soft reset sequence. We are trying to quiescent gpu - ddr > > > >>>>> traffic with this sequence. > > > >>>>> > > > >>>>>> + if (adreno_has_gmu_wrapper(adreno_gpu)) { > > > >>>>>> + /* Halt the GX side of GBIF */ > > > >>>>>> + gpu_write(gpu, REG_A6XX_RBBM_GBIF_HALT, GBIF_GX_HALT_MASK); > > > >>>>>> + spin_until(gpu_read(gpu, REG_A6XX_RBBM_GBIF_HALT_ACK) & > > > >>>>>> + GBIF_GX_HALT_MASK); > > > >>>>>> + > > > >>>>>> + /* Halt new client requests on GBIF */ > > > >>>>>> + gpu_write(gpu, REG_A6XX_GBIF_HALT, GBIF_CLIENT_HALT_MASK); > > > >>>>>> + spin_until((gpu_read(gpu, REG_A6XX_GBIF_HALT_ACK) & > > > >>>>>> + (GBIF_CLIENT_HALT_MASK)) == GBIF_CLIENT_HALT_MASK); > > > >>>>>> + > > > >>>>>> + /* Halt all AXI requests on GBIF */ > > > >>>>>> + gpu_write(gpu, REG_A6XX_GBIF_HALT, GBIF_ARB_HALT_MASK); > > > >>>>>> + spin_until((gpu_read(gpu, REG_A6XX_GBIF_HALT_ACK) & > > > >>>>>> + (GBIF_ARB_HALT_MASK)) == GBIF_ARB_HALT_MASK); > > > >>>>>> + > > > >>>>>> + /* Clear the halts */ > > > >>>>>> + gpu_write(gpu, REG_A6XX_GBIF_HALT, 0); > > > >>>>>> + > > > >>>>>> + gpu_write(gpu, REG_A6XX_RBBM_GBIF_HALT, 0); > > > >>>>>> + > > > >>>>>> + /* This *really* needs to go through before we do anything else! */ > > > >>>>>> + mb(); > > > >>>>>> + } > > > >>>>>> + > > > >>>>> > > > >>>>> This sequence should be before we collapse cx gdsc. Also, please see if > > > >>>>> we can create a subroutine to avoid code dup. > > > >>>>> > > > >>>>>> pm_runtime_use_autosuspend(&gpu->pdev->dev); > > > >>>>>> > > > >>>>>> if (active_submits) > > > >>>>>> @@ -1463,7 +1513,8 @@ static void a6xx_fault_detect_irq(struct msm_gpu *gpu) > > > >>>>>> * Force the GPU to stay on until after we finish > > > >>>>>> * collecting information > > > >>>>>> */ > > > >>>>>> - gmu_write(&a6xx_gpu->gmu, REG_A6XX_GMU_GMU_PWR_COL_KEEPALIVE, 1); > > > >>>>>> + if (!adreno_has_gmu_wrapper(adreno_gpu)) > > > >>>>>> + gmu_write(&a6xx_gpu->gmu, REG_A6XX_GMU_GMU_PWR_COL_KEEPALIVE, 1); > > > >>>>>> > > > >>>>>> DRM_DEV_ERROR(&gpu->pdev->dev, > > > >>>>>> "gpu fault ring %d fence %x status %8.8X rb %4.4x/%4.4x ib1 %16.16llX/%4.4x ib2 %16.16llX/%4.4x\n", > > > >>>>>> @@ -1624,7 +1675,7 @@ static void a6xx_llc_slices_init(struct platform_device *pdev, > > > >>>>>> a6xx_gpu->llc_mmio = ERR_PTR(-EINVAL); > > > >>>>>> } > > > >>>>>> > > > >>>>>> -static int a6xx_pm_resume(struct msm_gpu *gpu) > > > >>>>>> +static int a6xx_gmu_pm_resume(struct msm_gpu *gpu) > > > >>>>>> { > > > >>>>>> struct adreno_gpu *adreno_gpu = to_adreno_gpu(gpu); > > > >>>>>> struct a6xx_gpu *a6xx_gpu = to_a6xx_gpu(adreno_gpu); > > > >>>>>> @@ -1644,10 +1695,61 @@ static int a6xx_pm_resume(struct msm_gpu *gpu) > > > >>>>>> > > > >>>>>> a6xx_llc_activate(a6xx_gpu); > > > >>>>>> > > > >>>>>> - return 0; > > > >>>>>> + return ret; > > > >>>>>> } > > > >>>>>> > > > >>>>>> -static int a6xx_pm_suspend(struct msm_gpu *gpu) > > > >>>>>> +static int a6xx_pm_resume(struct msm_gpu *gpu) > > > >>>>>> +{ > > > >>>>>> + struct adreno_gpu *adreno_gpu = to_adreno_gpu(gpu); > > > >>>>>> + struct a6xx_gpu *a6xx_gpu = to_a6xx_gpu(adreno_gpu); > > > >>>>>> + struct a6xx_gmu *gmu = &a6xx_gpu->gmu; > > > >>>>>> + unsigned long freq = 0; > > > >>>>>> + struct dev_pm_opp *opp; > > > >>>>>> + int ret; > > > >>>>>> + > > > >>>>>> + gpu->needs_hw_init = true; > > > >>>>>> + > > > >>>>>> + trace_msm_gpu_resume(0); > > > >>>>>> + > > > >>>>>> + mutex_lock(&a6xx_gpu->gmu.lock); > > > >>>>> I think we can ignore gmu lock as there is no real gmu device. > > > >>>>> > > > >>>>>> + > > > >>>>>> + pm_runtime_resume_and_get(gmu->dev); > > > >>>>>> + pm_runtime_resume_and_get(gmu->gxpd); > > > >>>>>> + > > > >>>>>> + /* Set the core clock, having VDD scaling in mind */ > > > >>>>>> + ret = dev_pm_opp_set_rate(&gpu->pdev->dev, gpu->fast_rate); > > > >>>>>> + if (ret) > > > >>>>>> + goto err_core_clk; > > > >>>>>> + > > > >>>>>> + ret = clk_bulk_prepare_enable(gpu->nr_clocks, gpu->grp_clks); > > > >>>>>> + if (ret) > > > >>>>>> + goto err_bulk_clk; > > > >>>>>> + > > > >>>>>> + ret = clk_prepare_enable(gpu->ebi1_clk); > > > >>>>>> + if (ret) > > > >>>>>> + goto err_mem_clk; > > > >>>>>> + > > > >>>>>> + /* If anything goes south, tear the GPU down piece by piece.. */ > > > >>>>>> + if (ret) { > > > >>>>>> +err_mem_clk: > > > >>>>>> + clk_bulk_disable_unprepare(gpu->nr_clocks, gpu->grp_clks); > > > >>>>>> +err_bulk_clk: > > > >>>>>> + opp = dev_pm_opp_find_freq_ceil(&gpu->pdev->dev, &freq); > > > >>>>>> + dev_pm_opp_put(opp); > > > >>>>>> + dev_pm_opp_set_rate(&gpu->pdev->dev, 0); > > > >>>>>> +err_core_clk: > > > >>>>>> + pm_runtime_put(gmu->gxpd); > > > >>>>>> + pm_runtime_put(gmu->dev); > > > >>>>>> + } > > > >>>>>> + mutex_unlock(&a6xx_gpu->gmu.lock); > > > >>>>>> + > > > >>>>>> + if (!ret) > > > >>>>>> + msm_devfreq_resume(gpu); > > > >>>>>> + > > > >>>>>> + return ret; > > > >>>>>> +} > > > >>>>>> + > > > >>>>>> +static int a6xx_gmu_pm_suspend(struct msm_gpu *gpu) > > > >>>>>> { > > > >>>>>> struct adreno_gpu *adreno_gpu = to_adreno_gpu(gpu); > > > >>>>>> struct a6xx_gpu *a6xx_gpu = to_a6xx_gpu(adreno_gpu); > > > >>>>>> @@ -1674,11 +1776,62 @@ static int a6xx_pm_suspend(struct msm_gpu *gpu) > > > >>>>>> return 0; > > > >>>>>> } > > > >>>>>> > > > >>>>>> +static int a6xx_pm_suspend(struct msm_gpu *gpu) > > > >>>>>> +{ > > > >>>>>> + struct adreno_gpu *adreno_gpu = to_adreno_gpu(gpu); > > > >>>>>> + struct a6xx_gpu *a6xx_gpu = to_a6xx_gpu(adreno_gpu); > > > >>>>>> + struct a6xx_gmu *gmu = &a6xx_gpu->gmu; > > > >>>>>> + unsigned long freq = 0; > > > >>>>>> + struct dev_pm_opp *opp; > > > >>>>>> + int i, ret; > > > >>>>>> + > > > >>>>>> + trace_msm_gpu_suspend(0); > > > >>>>>> + > > > >>>>>> + opp = dev_pm_opp_find_freq_ceil(&gpu->pdev->dev, &freq); > > > >>>>>> + dev_pm_opp_put(opp); > > > >>>>>> + > > > >>>>>> + msm_devfreq_suspend(gpu); > > > >>>>>> + > > > >>>>>> + mutex_lock(&a6xx_gpu->gmu.lock); > > > >>>>>> + > > > >>>>>> + clk_disable_unprepare(gpu->ebi1_clk); > > > >>>>>> + > > > >>>>>> + clk_bulk_disable_unprepare(gpu->nr_clocks, gpu->grp_clks); > > > >>>>>> + > > > >>>>>> + /* Set frequency to the minimum supported level (no 27MHz on A6xx!) */ > > > >>>>>> + ret = dev_pm_opp_set_rate(&gpu->pdev->dev, freq); > > > >>>>>> + if (ret) > > > >>>>>> + goto err; > > > >>>>>> + > > > >>>>>> + pm_runtime_put_sync(gmu->gxpd); > > > >>>>>> + pm_runtime_put_sync(gmu->dev); > > > >>>>>> + > > > >>>>>> + mutex_unlock(&a6xx_gpu->gmu.lock); > > > >>>>>> + > > > >>>>>> + if (a6xx_gpu->shadow_bo) > > > >>>>>> + for (i = 0; i < gpu->nr_rings; i++) > > > >>>>>> + a6xx_gpu->shadow[i] = 0; > > > >>>>>> + > > > >>>>>> + gpu->suspend_count++; > > > >>>>>> + > > > >>>>>> + return 0; > > > >>>>>> + > > > >>>>>> +err: > > > >>>>>> + mutex_unlock(&a6xx_gpu->gmu.lock); > > > >>>>>> + > > > >>>>>> + return ret; > > > >>>>>> +} > > > >>>>>> + > > > >>>>>> static int a6xx_get_timestamp(struct msm_gpu *gpu, uint64_t *value) > > > >>>>>> { > > > >>>>>> struct adreno_gpu *adreno_gpu = to_adreno_gpu(gpu); > > > >>>>>> struct a6xx_gpu *a6xx_gpu = to_a6xx_gpu(adreno_gpu); > > > >>>>>> > > > >>>>>> + if (adreno_has_gmu_wrapper(adreno_gpu)) { > > > >>>>>> + *value = gpu_read64(gpu, REG_A6XX_CP_ALWAYS_ON_COUNTER); > > > >>>>>> + return 0; > > > >>>>>> + } > > > >>>>>> + > > > >>>>> Instead of wrapper check here, we can just create a separate op. I don't > > > >>>>> see any benefit in reusing the same function here. > > > >>>>> > > > >>>>> > > > >>>>>> mutex_lock(&a6xx_gpu->gmu.lock); > > > >>>>>> > > > >>>>>> /* Force the GPU power on so we can read this register */ > > > >>>>>> @@ -1716,7 +1869,8 @@ static void a6xx_destroy(struct msm_gpu *gpu) > > > >>>>>> drm_gem_object_put(a6xx_gpu->shadow_bo); > > > >> 6xx_pm_suspend >>>> } > > > >>>>>> > > > >>>>>> - a6xx_llc_slices_destroy(a6xx_gpu); > > > >>>>>> + if (!adreno_has_gmu_wrapper(adreno_gpu)) > > > >>>>>> + a6xx_llc_slices_destroy(a6xx_gpu); > > > >>>>>> > > > >>>>>> mutex_lock(&a6xx_gpu->gmu.lock); > > > >>>>>> a6xx_gmu_remove(a6xx_gpu); > > > >>>>>> @@ -1957,8 +2111,8 @@ static const struct adreno_gpu_funcs funcs = { > > > >>>>>> .set_param = adreno_set_param, > > > >>>>>> .hw_init = a6xx_hw_init, > > > >>>>>> .ucode_load = a6xx_ucode_load, > > > >>>>>> - .pm_suspend = a6xx_pm_suspend, > > > >>>>>> - .pm_resume = a6xx_pm_resume, > > > >>>>>> + .pm_suspend = a6xx_gmu_pm_suspend, > > > >>>>>> + .pm_resume = a6xx_gmu_pm_resume, > > > >>>>>> .recover = a6xx_recover, > > > >>>>>> .submit = a6xx_submit, > > > >>>>>> .active_ring = a6xx_active_ring, > > > >>>>>> @@ -1982,6 +2136,35 @@ static const struct adreno_gpu_funcs funcs = { > > > >>>>>> .get_timestamp = a6xx_get_timestamp, > > > >>>>>> }; > > > >>>>>> > > > >>>>>> +static const struct adreno_gpu_funcs funcs_gmuwrapper = { > > > >>>>>> + .base = { > > > >>>>>> + .get_param = adreno_get_param, > > > >>>>>> + .set_param = adreno_set_param, > > > >>>>>> + .hw_init = a6xx_hw_init, > > > >>>>>> + .ucode_load = a6xx_ucode_load, > > > >>>>>> + .pm_suspend = a6xx_pm_suspend, > > > >>>>>> + .pm_resume = a6xx_pm_resume, > > > >>>>>> + .recover = a6xx_recover, > > > >>>>>> + .submit = a6xx_submit, > > > >>>>>> + .active_ring = a6xx_active_ring, > > > >>>>>> + .irq = a6xx_irq, > > > >>>>>> + .destroy = a6xx_destroy, > > > >>>>>> +#if defined(CONFIG_DRM_MSM_GPU_STATE) > > > >>>>>> + .show = a6xx_show, > > > >>>>>> +#endif > > > >>>>>> + .gpu_busy = a6xx_gpu_busy, > > > >>>>>> +#if defined(CONFIG_DRM_MSM_GPU_STATE) > > > >>>>>> + .gpu_state_get = a6xx_gpu_state_get, > > > >>>>>> + .gpu_state_put = a6xx_gpu_state_put, > > > >>>>>> +#endif > > > >>>>>> + .create_address_space = a6xx_create_address_space, > > > >>>>>> + .create_private_address_space = a6xx_create_private_address_space, > > > >>>>>> + .get_rptr = a6xx_get_rptr, > > > >>>>>> + .progress = a6xx_progress, > > > >>>>>> + }, > > > >>>>>> + .get_timestamp = a6xx_get_timestamp, > > > >>>>>> +}; > > > >>>>>> + > > > >>>>>> struct msm_gpu *a6xx_gpu_init(struct drm_device *dev) > > > >>>>>> { > > > >>>>>> struct msm_drm_private *priv = dev->dev_private; > > > >>>>>> @@ -2003,18 +2186,36 @@ struct msm_gpu *a6xx_gpu_init(struct drm_device *dev) > > > >>>>>> > > > >>>>>> adreno_gpu->registers = NULL; > > > >>>>>> > > > >>>>>> + /* Check if there is a GMU phandle and set it up */ > > > >>>>>> + node = of_parse_phandle(pdev->dev.of_node, "qcom,gmu", 0); > > > >>>>>> + /* FIXME: How do we gracefully handle this? */ > > > >>>>>> + BUG_ON(!node); > > > >>>>> How will you handle this BUG() when there is no GMU (a610 gpu)? > > > >>>>> > > > >>>>>> + > > > >>>>>> + adreno_gpu->gmu_is_wrapper = of_device_is_compatible(node, "qcom,adreno-gmu-wrapper"); > > > >>>>>> + > > > >>>>>> /* > > > >>>>>> * We need to know the platform type before calling into adreno_gpu_init > > > >>>>>> * so that the hw_apriv flag can be correctly set. Snoop into the info > > > >>>>>> * and grab the revision number > > > >>>>>> */ > > > >>>>>> info = adreno_info(config->rev); > > > >>>>>> - > > > >>>>>> - if (info && (info->revn == 650 || info->revn == 660 || > > > >>>>>> - adreno_cmp_rev(ADRENO_REV(6, 3, 5, ANY_ID), info->rev))) > > > >>>>>> + if (!info) > > > >>>>>> + return ERR_PTR(-EINVAL); > > > >>>>>> + > > > >>>>>> + /* Assign these early so that we can use the is_aXYZ helpers */ > > > >>>>>> + /* Numeric revision IDs (e.g. 630) */ > > > >>>>>> + adreno_gpu->revn = info->revn; > > > >>>>>> + /* New-style ADRENO_REV()-only */ > > > >>>>>> + adreno_gpu->rev = info->rev; > > > >>>>>> + /* Quirk data */ > > > >>>>>> + adreno_gpu->info = info; > > > >>>>>> + > > > >>>>>> + if (adreno_is_a650(adreno_gpu) || adreno_is_a660_family(adreno_gpu)) > > > >>>>>> adreno_gpu->base.hw_apriv = true; > > > >>>>>> > > > >>>>>> - a6xx_llc_slices_init(pdev, a6xx_gpu); > > > >>>>>> + /* No LLCC on non-RPMh (and by extension, non-GMU) SoCs */ > > > >>>>>> + if (!adreno_has_gmu_wrapper(adreno_gpu)) > > > >>>>>> + a6xx_llc_slices_init(pdev, a6xx_gpu); > > > >>>>>> > > > >>>>>> ret = a6xx_set_supported_hw(&pdev->dev, config->rev); > > > >>>>>> if (ret) { > > > >>>>>> @@ -2022,7 +2223,10 @@ struct msm_gpu *a6xx_gpu_init(struct drm_device *dev) > > > >>>>>> return ERR_PTR(ret); > > > >>>>>> } > > > >>>>>> > > > >>>>>> - ret = adreno_gpu_init(dev, pdev, adreno_gpu, &funcs, 1); > > > >>>>>> + if (adreno_has_gmu_wrapper(adreno_gpu)) > > > >>>>>> + ret = adreno_gpu_init(dev, pdev, adreno_gpu, &funcs_gmuwrapper, 1); > > > >>>>>> + else > > > >>>>>> + ret = adreno_gpu_init(dev, pdev, adreno_gpu, &funcs, 1); > > > >>>>>> if (ret) { > > > >>>>>> a6xx_destroy(&(a6xx_gpu->base.base)); > > > >>>>>> return ERR_PTR(ret); > > > >>>>>> @@ -2035,13 +2239,10 @@ struct msm_gpu *a6xx_gpu_init(struct drm_device *dev) > > > >>>>>> if (adreno_is_a618(adreno_gpu) || adreno_is_7c3(adreno_gpu)) > > > >>>>>> priv->gpu_clamp_to_idle = true; > > > >>>>>> > > > >>>>>> - /* Check if there is a GMU phandle and set it up */ > > > >>>>>> - node = of_parse_phandle(pdev->dev.of_node, "qcom,gmu", 0); > > > >>>>>> - > > > >>>>>> - /* FIXME: How do we gracefully handle this? */ > > > >>>>>> - BUG_ON(!node); > > > >>>>>> - > > > >>>>>> - ret = a6xx_gmu_init(a6xx_gpu, node); > > > >>>>>> + if (adreno_has_gmu_wrapper(adreno_gpu)) > > > >>>>>> + ret = a6xx_gmu_wrapper_init(a6xx_gpu, node); > > > >>>>>> + else > > > >>>>>> + ret = a6xx_gmu_init(a6xx_gpu, node); > > > >>>>>> of_node_put(node); > > > >>>>>> if (ret) { > > > >>>>>> a6xx_destroy(&(a6xx_gpu->base.base)); > > > >>>>>> diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.h b/drivers/gpu/drm/msm/adreno/a6xx_gpu.h > > > >>>>>> index eea2e60ce3b7..51a7656072fa 100644 > > > >>>>>> --- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.h > > > >>>>>> +++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.h > > > >>>>>> @@ -76,6 +76,7 @@ int a6xx_gmu_set_oob(struct a6xx_gmu *gmu, enum a6xx_gmu_oob_state state); > > > >>>>>> void a6xx_gmu_clear_oob(struct a6xx_gmu *gmu, enum a6xx_gmu_oob_state state); > > > >>>>>> > > > >>>>>> int a6xx_gmu_init(struct a6xx_gpu *a6xx_gpu, struct device_node *node); > > > >>>>>> +int a6xx_gmu_wrapper_init(struct a6xx_gpu *a6xx_gpu, struct device_node *node); > > > >>>>>> void a6xx_gmu_remove(struct a6xx_gpu *a6xx_gpu); > > > >>>>>> > > > >>>>>> void a6xx_gmu_set_freq(struct msm_gpu *gpu, struct dev_pm_opp *opp, > > > >>>>>> diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu_state.c b/drivers/gpu/drm/msm/adreno/a6xx_gpu_state.c > > > >>>>>> index 30ecdff363e7..4e5d650578c6 100644 > > > >>>>>> --- a/drivers/gpu/drm/msm/adreno/a6xx_gpu_state.c > > > >>>>>> +++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu_state.c > > > >>>>>> @@ -1041,16 +1041,18 @@ struct msm_gpu_state *a6xx_gpu_state_get(struct msm_gpu *gpu) > > > >>>>>> /* Get the generic state from the adreno core */ > > > >>>>>> adreno_gpu_state_get(gpu, &a6xx_state->base); > > > >>>>>> > > > >>>>>> - a6xx_get_gmu_registers(gpu, a6xx_state); > > > >>>>>> + if (!adreno_has_gmu_wrapper(adreno_gpu)) { > > > >>>>> nit: Kinda misleading function name to a layman. Should we invert the > > > >>>>> function to "adreno_has_gmu"? > > > >>>>> > > > >>>>> -Akhil > > > >>>>>> + a6xx_get_gmu_registers(gpu, a6xx_state); > > > >>>>>> > > > >>>>>> - a6xx_state->gmu_log = a6xx_snapshot_gmu_bo(a6xx_state, &a6xx_gpu->gmu.log); > > > >>>>>> - a6xx_state->gmu_hfi = a6xx_snapshot_gmu_bo(a6xx_state, &a6xx_gpu->gmu.hfi); > > > >>>>>> - a6xx_state->gmu_debug = a6xx_snapshot_gmu_bo(a6xx_state, &a6xx_gpu->gmu.debug); > > > >>>>>> + a6xx_state->gmu_log = a6xx_snapshot_gmu_bo(a6xx_state, &a6xx_gpu->gmu.log); > > > >>>>>> + a6xx_state->gmu_hfi = a6xx_snapshot_gmu_bo(a6xx_state, &a6xx_gpu->gmu.hfi); > > > >>>>>> + a6xx_state->gmu_debug = a6xx_snapshot_gmu_bo(a6xx_state, &a6xx_gpu->gmu.debug); > > > >>>>>> > > > >>>>>> - a6xx_snapshot_gmu_hfi_history(gpu, a6xx_state); > > > >>>>>> + a6xx_snapshot_gmu_hfi_history(gpu, a6xx_state); > > > >>>>>> + } > > > >>>>>> > > > >>>>>> /* If GX isn't on the rest of the data isn't going to be accessible */ > > > >>>>>> - if (!a6xx_gmu_gx_is_on(&a6xx_gpu->gmu)) > > > >>>>>> + if (!adreno_has_gmu_wrapper(adreno_gpu) && !a6xx_gmu_gx_is_on(&a6xx_gpu->gmu)) > > > >>>>>> return &a6xx_state->base; > > > >>>>>> > > > >>>>>> /* Get the banks of indexed registers */ > > > >>>>>> diff --git a/drivers/gpu/drm/msm/adreno/adreno_gpu.c b/drivers/gpu/drm/msm/adreno/adreno_gpu.c > > > >>>>>> index 6934cee07d42..5c5901d65950 100644 > > > >>>>>> --- a/drivers/gpu/drm/msm/adreno/adreno_gpu.c > > > >>>>>> +++ b/drivers/gpu/drm/msm/adreno/adreno_gpu.c > > > >>>>>> @@ -528,6 +528,10 @@ int adreno_load_fw(struct adreno_gpu *adreno_gpu) > > > >>>>>> if (!adreno_gpu->info->fw[i]) > > > >>>>>> continue; > > > >>>>>> > > > >>>>>> + /* Skip loading GMU firwmare with GMU Wrapper */ > > > >>>>>> + if (adreno_has_gmu_wrapper(adreno_gpu) && i == ADRENO_FW_GMU) > > > >>>>>> + continue; > > > >>>>>> + > > > >>>>>> /* Skip if the firmware has already been loaded */ > > > >>>>>> if (adreno_gpu->fw[i]) > > > >>>>>> continue; > > > >>>>>> @@ -1074,8 +1078,8 @@ int adreno_gpu_init(struct drm_device *drm, struct platform_device *pdev, > > > >>>>>> u32 speedbin; > > > >>>>>> int ret; > > > >>>>>> > > > >>>>>> - /* Only handle the core clock when GMU is not in use */ > > > >>>>>> - if (config->rev.core < 6) { > > > >>>>>> + /* Only handle the core clock when GMU is not in use (or is absent). */ > > > >>>>>> + if (adreno_has_gmu_wrapper(adreno_gpu) || config->rev.core < 6) { > > > >>>>>> /* > > > >>>>>> * This can only be done before devm_pm_opp_of_add_table(), or > > > >>>>>> * dev_pm_opp_set_config() will WARN_ON() > > > >>>>>> diff --git a/drivers/gpu/drm/msm/adreno/adreno_gpu.h b/drivers/gpu/drm/msm/adreno/adreno_gpu.h > > > >>>>>> index f62612a5c70f..ee5352bc5329 100644 > > > >>>>>> --- a/drivers/gpu/drm/msm/adreno/adreno_gpu.h > > > >>>>>> +++ b/drivers/gpu/drm/msm/adreno/adreno_gpu.h > > > >>>>>> @@ -115,6 +115,7 @@ struct adreno_gpu { > > > >>>>>> * code (a3xx_gpu.c) and stored in this common location. > > > >>>>>> */ > > > >>>>>> const unsigned int *reg_offsets; > > > >>>>>> + bool gmu_is_wrapper; > > > >>>>>> }; > > > >>>>>> #define to_adreno_gpu(x) container_of(x, struct adreno_gpu, base) > > > >>>>>> > > > >>>>>> @@ -145,6 +146,11 @@ struct adreno_platform_config { > > > >>>>>> > > > >>>>>> bool adreno_cmp_rev(struct adreno_rev rev1, struct adreno_rev rev2); > > > >>>>>> > > > >>>>>> +static inline bool adreno_has_gmu_wrapper(struct adreno_gpu *gpu) > > > >>>>>> +{ > > > >>>>>> + return gpu->gmu_is_wrapper; > > > >>>>>> +} > > > >>>>>> + > > > >>>>>> static inline bool adreno_is_a2xx(struct adreno_gpu *gpu) > > > >>>>>> { > > > >>>>>> return (gpu->revn < 300); > > > >>>>>> > > > >>>>>> -- > > > >>>>>> 2.40.0 > > > >>>>>>