From: Takashi Iwai <tiwai@suse.de>
To: Sergei Trofimovich <slyich@gmail.com>
Cc: "Maciej Rutecki" <maciej.rutecki@gmail.com>,
linux-kernel@vger.kernel.org,
"Éric Piel" <eric.piel@tremplin-utc.net>
Subject: Re: intel hda regression: 2.6.33-rc{1,2}: hd-audio0 eats 25% CPU (according to top)
Date: Fri, 25 Dec 2009 18:06:00 +0100 [thread overview]
Message-ID: <s5hvdfvyoef.wl%tiwai@suse.de> (raw)
In-Reply-To: <20091225183205.744be270@mosly>
At Fri, 25 Dec 2009 18:32:05 +0200,
Sergei Trofimovich wrote:
>
> On Fri, 25 Dec 2009 17:05:16 +0100
> Takashi Iwai <tiwai@suse.de> wrote:
>
> > It's a bit surprising that this resulted in the high CPU usage
> > instead of erroneous behavior. This should be rather a bug of
> > codec chip...
> >
> > Anyway, Segei, which codec is on your machine? Is it Analog Device
> > one?
> > IIRC, the one's on Maciej and Eric machines are AD codecs.
> > If so, we can just revert the changes to patch_analog.c in that
> > commit.
>
> How can I check? alsamixer shows
> Chip: Analog Devices AD1981
> Not sure it's valid though.
>
> It's a HP Compaq 2510p laptop.
>
> 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
> Subsystem: Hewlett-Packard Company Device 30c9
> (posted whole lspci output slightly earlier if needed)
OK, they all seem to have AD codecs indeed.
Instead of reverting, how about the patch below?
thanks,
Takashi
---
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index 950ee5c..f98b47c 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -1327,11 +1327,13 @@ EXPORT_SYMBOL_HDA(snd_hda_query_pin_caps);
*/
u32 snd_hda_pin_sense(struct hda_codec *codec, hda_nid_t nid)
{
- u32 pincap = snd_hda_query_pin_caps(codec, nid);
-
- if (pincap & AC_PINCAP_TRIG_REQ) /* need trigger? */
- snd_hda_codec_read(codec, nid, 0, AC_VERB_SET_PIN_SENSE, 0);
+ u32 pincap;
+ if (!codec->no_trigger_sense) {
+ pincap = snd_hda_query_pin_caps(codec, nid);
+ if (pincap & AC_PINCAP_TRIG_REQ) /* need trigger? */
+ snd_hda_codec_read(codec, nid, 0, AC_VERB_SET_PIN_SENSE, 0);
+ }
return snd_hda_codec_read(codec, nid, 0,
AC_VERB_GET_PIN_SENSE, 0);
}
diff --git a/sound/pci/hda/hda_codec.h b/sound/pci/hda/hda_codec.h
index 1d541b7..0a770a2 100644
--- a/sound/pci/hda/hda_codec.h
+++ b/sound/pci/hda/hda_codec.h
@@ -817,6 +817,7 @@ struct hda_codec {
unsigned int pin_amp_workaround:1; /* pin out-amp takes index
* (e.g. Conexant codecs)
*/
+ unsigned int no_trigger_sense:1; /* don't trigger at pin-sensing */
#ifdef CONFIG_SND_HDA_POWER_SAVE
unsigned int power_on :1; /* current (global) power-state */
unsigned int power_transition :1; /* power-state in transition */
diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c
index 1a36137..69a941c 100644
--- a/sound/pci/hda/patch_analog.c
+++ b/sound/pci/hda/patch_analog.c
@@ -1186,6 +1186,8 @@ static int patch_ad1986a(struct hda_codec *codec)
*/
spec->multiout.no_share_stream = 1;
+ codec->no_trigger_sense = 1;
+
return 0;
}
@@ -1371,6 +1373,8 @@ static int patch_ad1983(struct hda_codec *codec)
codec->patch_ops = ad198x_patch_ops;
+ codec->no_trigger_sense = 1;
+
return 0;
}
@@ -1813,6 +1817,9 @@ static int patch_ad1981(struct hda_codec *codec)
codec->patch_ops.unsol_event = ad1981_hp_unsol_event;
break;
}
+
+ codec->no_trigger_sense = 1;
+
return 0;
}
@@ -3118,6 +3125,8 @@ static int patch_ad1988(struct hda_codec *codec)
#endif
spec->vmaster_nid = 0x04;
+ codec->no_trigger_sense = 1;
+
return 0;
}
@@ -3330,6 +3339,8 @@ static int patch_ad1884(struct hda_codec *codec)
codec->patch_ops = ad198x_patch_ops;
+ codec->no_trigger_sense = 1;
+
return 0;
}
@@ -4287,6 +4298,8 @@ static int patch_ad1884a(struct hda_codec *codec)
break;
}
+ codec->no_trigger_sense = 1;
+
return 0;
}
@@ -4623,6 +4636,9 @@ static int patch_ad1882(struct hda_codec *codec)
spec->mixers[2] = ad1882_6stack_mixers;
break;
}
+
+ codec->no_trigger_sense = 1;
+
return 0;
}
next prev parent reply other threads:[~2009-12-25 17:06 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-12-25 9:31 drm/radeon/kms regression: 2.6.33-rc2 does not boot Andrei Gaponenko
2009-12-25 9:46 ` Dave Airlie
2009-12-25 10:08 ` Andrei Gaponenko
2009-12-25 10:32 ` Dave Airlie
2009-12-25 10:44 ` Andrei Gaponenko
2009-12-25 12:35 ` Dr. David Alan Gilbert
2009-12-26 18:57 ` Alex Deucher
2009-12-25 10:21 ` intel hda regression: 2.6.33-rc{1,2}: hd-audio0 eats 25% CPU (according to top) Sergei Trofimovich
2009-12-25 11:18 ` Takashi Iwai
2009-12-25 14:25 ` Sergei Trofimovich
2009-12-25 15:31 ` Maciej Rutecki
2009-12-25 16:05 ` Takashi Iwai
2009-12-25 16:32 ` Sergei Trofimovich
2009-12-25 17:06 ` Takashi Iwai [this message]
2009-12-25 18:00 ` Sergei Trofimovich
2009-12-25 19:01 ` Maciej Rutecki
2009-12-25 21:59 ` Takashi Iwai
2009-12-25 16:44 ` Maciej Rutecki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=s5hvdfvyoef.wl%tiwai@suse.de \
--to=tiwai@suse.de \
--cc=eric.piel@tremplin-utc.net \
--cc=linux-kernel@vger.kernel.org \
--cc=maciej.rutecki@gmail.com \
--cc=slyich@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).