From: Andreas Happe <andreashappe@gmx.net>
To: linux-kernel@vger.kernel.org
Subject: [ACPI-1121] Method execution failed
Date: Tue, 13 May 2003 14:50:41 +0200 [thread overview]
Message-ID: <slrnbc1qh1.11d.andreashappe@flatline.ath.cx> (raw)
kernel version: 2.5.69-bk7,
hardware: hp omnibook 6100, i830m
the kernel boots (which is a huge improvement compared to older
releases, thanks), but i get the attached error.
After the system is booted there's a interessting situation, some parts
of acpi seem to be loaded (i have /proc/thermal_zone et al (shoudn't it
be /proc/acpi/* ?)), but they don't work.
The interessting bootup lines (apic is disabled):
| ACPI: RSDP (v000 PTLTD ) @ 0x000f6610
| ACPI: RSDT (v001 PTLTD EBRSDT 00576.00000) @ 0x0ff682e4
| ACPI: FADT (v001 QUANTA EBmador 00576.00000) @ 0x0ff73b64
| ACPI: BOOT (v001 PTLTD EBBFTBL$ 00576.00000) @ 0x0ff73bd8
| ACPI: DSDT (v001 HP-MCD EB DSDT 00576.00000) @ 0x00000000
| ACPI: BIOS passes blacklist
...
| ACPI: Subsystem revision 20030418
| ACPI-1121: *** Error: Method execution failed [\_SB_.PCI0.HUB_.FDS_.
| FCB1.CSID] (Node c12c55c0), AE_NOT_EXIST
| ACPI-1121: *** Error: Method execution failed
| [\_SB_.PCI0.HUB_.FDS_._REG] (Node c12c5940), AE_NOT_EXIST
| ACPI: Unable to start the ACPI Interpreter
...
| ACPI: ACPI tables contain no PCI IRQ routing entries
thx,
andreas
reply other threads:[~2003-05-13 12:41 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=slrnbc1qh1.11d.andreashappe@flatline.ath.cx \
--to=andreashappe@gmx.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).