[tip:x86/urgent] x86/cpu: Call verify_cpu() after having entered long mode too

[tip-bot for Borislav Petkov <tipbot@zytor.com>]

Commit-ID:  04633df0c43d710e5f696b06539c100898678235
Gitweb:     http://git.kernel.org/tip/04633df0c43d710e5f696b06539c100898678235
Author:     Borislav Petkov <bp@suse.de>
AuthorDate: Thu, 5 Nov 2015 16:57:56 +0100
Committer:  Thomas Gleixner <tglx@linutronix.de>
CommitDate: Sat, 7 Nov 2015 10:45:02 +0100

x86/cpu: Call verify_cpu() after having entered long mode too

When we get loaded by a 64-bit bootloader, kernel entry point is
startup_64 in head_64.S. We don't trust any and all bootloaders because
some will fiddle with CPU configuration so we go ahead and massage each
CPU into sanity again.

For example, some dell BIOSes have this XD disable feature which set
IA32_MISC_ENABLE[34] and disable NX. This might be some dumb workaround
for other OSes but Linux sure doesn't need it.

A similar thing is present in the Surface 3 firmware - see
https://bugzilla.kernel.org/show_bug.cgi?id=106051 - which sets this bit
only on the BSP:

  # rdmsr -a 0x1a0
  400850089
  850089
  850089
  850089

I know, right?!

There's not even an off switch in there.

So fix all those cases by sanitizing the 64-bit entry point too. For
that, make verify_cpu() callable in 64-bit mode also.

Requested-and-debugged-by: "H. Peter Anvin" <hpa@zytor.com>
Reported-and-tested-by: Bastien Nocera <bugzilla@hadess.net>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1446739076-21303-1-git-send-email-bp@alien8.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/kernel/head_64.S    |  8 ++++++++
 arch/x86/kernel/verify_cpu.S | 12 +++++++-----
 2 files changed, 15 insertions(+), 5 deletions(-)

diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
index 1d40ca8..ffdc0e8 100644
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -65,6 +65,9 @@ startup_64:
 	 * tables and then reload them.
 	 */
 
+	/* Sanitize CPU configuration */
+	call verify_cpu
+
 	/*
 	 * Compute the delta between the address I am compiled to run at and the
 	 * address I am actually running at.
@@ -174,6 +177,9 @@ ENTRY(secondary_startup_64)
 	 * after the boot processor executes this code.
 	 */
 
+	/* Sanitize CPU configuration */
+	call verify_cpu
+
 	movq	$(init_level4_pgt - __START_KERNEL_map), %rax
 1:
 
@@ -288,6 +294,8 @@ ENTRY(secondary_startup_64)
 	pushq	%rax		# target address in negative space
 	lretq
 
+#include "verify_cpu.S"
+
 #ifdef CONFIG_HOTPLUG_CPU
 /*
  * Boot CPU0 entry point. It's called from play_dead(). Everything has been set
diff --git a/arch/x86/kernel/verify_cpu.S b/arch/x86/kernel/verify_cpu.S
index b9242ba..4cf401f 100644
--- a/arch/x86/kernel/verify_cpu.S
+++ b/arch/x86/kernel/verify_cpu.S
@@ -34,10 +34,11 @@
 #include <asm/msr-index.h>
 
 verify_cpu:
-	pushfl				# Save caller passed flags
-	pushl	$0			# Kill any dangerous flags
-	popfl
+	pushf				# Save caller passed flags
+	push	$0			# Kill any dangerous flags
+	popf
 
+#ifndef __x86_64__
 	pushfl				# standard way to check for cpuid
 	popl	%eax
 	movl	%eax,%ebx
@@ -48,6 +49,7 @@ verify_cpu:
 	popl	%eax
 	cmpl	%eax,%ebx
 	jz	verify_cpu_no_longmode	# cpu has no cpuid
+#endif
 
 	movl	$0x0,%eax		# See if cpuid 1 is implemented
 	cpuid
@@ -130,10 +132,10 @@ verify_cpu_sse_test:
 	jmp	verify_cpu_sse_test	# try again
 
 verify_cpu_no_longmode:
-	popfl				# Restore caller passed flags
+	popf				# Restore caller passed flags
 	movl $1,%eax
 	ret
 verify_cpu_sse_ok:
-	popfl				# Restore caller passed flags
+	popf				# Restore caller passed flags
 	xorl %eax, %eax
 	ret