linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: tip-bot for Yinghai Lu <yinghai@kernel.org>
To: linux-tip-commits@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, hpa@zytor.com, mingo@kernel.org,
	konrad.wilk@oracle.com, yinghai@kernel.org, joro@8bytes.org,
	kyungmin.park@samsung.com, ebiederm@xmission.com, arnd@arndb.de,
	jeremy@goop.org, shuahkhan@gmail.com, ralf@linux-mips.org,
	m.szyprowski@samsung.com, andrzej.p@samsung.com,
	tglx@linutronix.de, hpa@linux.intel.com
Subject: [tip:x86/mm2] x86: Don' t panic if can not alloc buffer for swiotlb
Date: Tue, 29 Jan 2013 19:58:38 -0800	[thread overview]
Message-ID: <tip-ac2cbab21f318e19bc176a7f38a120cec835220f@git.kernel.org> (raw)
In-Reply-To: <1359058816-7615-36-git-send-email-yinghai@kernel.org>

Commit-ID:  ac2cbab21f318e19bc176a7f38a120cec835220f
Gitweb:     http://git.kernel.org/tip/ac2cbab21f318e19bc176a7f38a120cec835220f
Author:     Yinghai Lu <yinghai@kernel.org>
AuthorDate: Thu, 24 Jan 2013 12:20:16 -0800
Committer:  H. Peter Anvin <hpa@linux.intel.com>
CommitDate: Tue, 29 Jan 2013 19:36:53 -0800

x86: Don't panic if can not alloc buffer for swiotlb

Normal boot path on system with iommu support:
swiotlb buffer will be allocated early at first and then try to initialize
iommu, if iommu for intel or AMD could setup properly, swiotlb buffer
will be freed.

The early allocating is with bootmem, and could panic when we try to use
kdump with buffer above 4G only, or with memmap to limit mem under 4G.
for example: memmap=4095M$1M to remove memory under 4G.

According to Eric, add _nopanic version and no_iotlb_memory to fail
map single later if swiotlb is still needed.

-v2: don't pass nopanic, and use -ENOMEM return value according to Eric.
     panic early instead of using swiotlb_full to panic...according to Eric/Konrad.
-v3: make swiotlb_init to be notpanic, but will affect:
     arm64, ia64, powerpc, tile, unicore32, x86.
-v4: cleanup swiotlb_init by removing swiotlb_init_with_default_size.

Suggested-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/1359058816-7615-36-git-send-email-yinghai@kernel.org
Reviewed-and-tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Cc: linux-mips@linux-mips.org
Cc: xen-devel@lists.xensource.com
Cc: virtualization@lists.linux-foundation.org
Cc: Shuah Khan <shuahkhan@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/mips/cavium-octeon/dma-octeon.c |  3 ++-
 drivers/xen/swiotlb-xen.c            |  4 ++-
 include/linux/swiotlb.h              |  2 +-
 lib/swiotlb.c                        | 47 ++++++++++++++++++++++--------------
 4 files changed, 35 insertions(+), 21 deletions(-)

diff --git a/arch/mips/cavium-octeon/dma-octeon.c b/arch/mips/cavium-octeon/dma-octeon.c
index 41dd0088..02f2444 100644
--- a/arch/mips/cavium-octeon/dma-octeon.c
+++ b/arch/mips/cavium-octeon/dma-octeon.c
@@ -317,7 +317,8 @@ void __init plat_swiotlb_setup(void)
 
 	octeon_swiotlb = alloc_bootmem_low_pages(swiotlbsize);
 
-	swiotlb_init_with_tbl(octeon_swiotlb, swiotlb_nslabs, 1);
+	if (swiotlb_init_with_tbl(octeon_swiotlb, swiotlb_nslabs, 1) == -ENOMEM)
+		panic("Cannot allocate SWIOTLB buffer");
 
 	mips_dma_map_ops = &octeon_linear_dma_map_ops.dma_map_ops;
 }
diff --git a/drivers/xen/swiotlb-xen.c b/drivers/xen/swiotlb-xen.c
index af47e75..1d94316 100644
--- a/drivers/xen/swiotlb-xen.c
+++ b/drivers/xen/swiotlb-xen.c
@@ -231,7 +231,9 @@ retry:
 	}
 	start_dma_addr = xen_virt_to_bus(xen_io_tlb_start);
 	if (early) {
-		swiotlb_init_with_tbl(xen_io_tlb_start, xen_io_tlb_nslabs, verbose);
+		if (swiotlb_init_with_tbl(xen_io_tlb_start, xen_io_tlb_nslabs,
+			 verbose))
+			panic("Cannot allocate SWIOTLB buffer");
 		rc = 0;
 	} else
 		rc = swiotlb_late_init_with_tbl(xen_io_tlb_start, xen_io_tlb_nslabs);
diff --git a/include/linux/swiotlb.h b/include/linux/swiotlb.h
index 071d62c..2de42f9 100644
--- a/include/linux/swiotlb.h
+++ b/include/linux/swiotlb.h
@@ -23,7 +23,7 @@ extern int swiotlb_force;
 #define IO_TLB_SHIFT 11
 
 extern void swiotlb_init(int verbose);
-extern void swiotlb_init_with_tbl(char *tlb, unsigned long nslabs, int verbose);
+int swiotlb_init_with_tbl(char *tlb, unsigned long nslabs, int verbose);
 extern unsigned long swiotlb_nr_tbl(void);
 extern int swiotlb_late_init_with_tbl(char *tlb, unsigned long nslabs);
 
diff --git a/lib/swiotlb.c b/lib/swiotlb.c
index 196b069..bfe02b8 100644
--- a/lib/swiotlb.c
+++ b/lib/swiotlb.c
@@ -122,11 +122,18 @@ static dma_addr_t swiotlb_virt_to_bus(struct device *hwdev,
 	return phys_to_dma(hwdev, virt_to_phys(address));
 }
 
+static bool no_iotlb_memory;
+
 void swiotlb_print_info(void)
 {
 	unsigned long bytes = io_tlb_nslabs << IO_TLB_SHIFT;
 	unsigned char *vstart, *vend;
 
+	if (no_iotlb_memory) {
+		pr_warn("software IO TLB: No low mem\n");
+		return;
+	}
+
 	vstart = phys_to_virt(io_tlb_start);
 	vend = phys_to_virt(io_tlb_end);
 
@@ -136,7 +143,7 @@ void swiotlb_print_info(void)
 	       bytes >> 20, vstart, vend - 1);
 }
 
-void __init swiotlb_init_with_tbl(char *tlb, unsigned long nslabs, int verbose)
+int __init swiotlb_init_with_tbl(char *tlb, unsigned long nslabs, int verbose)
 {
 	void *v_overflow_buffer;
 	unsigned long i, bytes;
@@ -150,9 +157,10 @@ void __init swiotlb_init_with_tbl(char *tlb, unsigned long nslabs, int verbose)
 	/*
 	 * Get the overflow emergency buffer
 	 */
-	v_overflow_buffer = alloc_bootmem_low_pages(PAGE_ALIGN(io_tlb_overflow));
+	v_overflow_buffer = alloc_bootmem_low_pages_nopanic(
+						PAGE_ALIGN(io_tlb_overflow));
 	if (!v_overflow_buffer)
-		panic("Cannot allocate SWIOTLB overflow buffer!\n");
+		return -ENOMEM;
 
 	io_tlb_overflow_buffer = __pa(v_overflow_buffer);
 
@@ -169,15 +177,19 @@ void __init swiotlb_init_with_tbl(char *tlb, unsigned long nslabs, int verbose)
 
 	if (verbose)
 		swiotlb_print_info();
+
+	return 0;
 }
 
 /*
  * Statically reserve bounce buffer space and initialize bounce buffer data
  * structures for the software IO TLB used to implement the DMA API.
  */
-static void __init
-swiotlb_init_with_default_size(size_t default_size, int verbose)
+void  __init
+swiotlb_init(int verbose)
 {
+	/* default to 64MB */
+	size_t default_size = 64UL<<20;
 	unsigned char *vstart;
 	unsigned long bytes;
 
@@ -188,20 +200,16 @@ swiotlb_init_with_default_size(size_t default_size, int verbose)
 
 	bytes = io_tlb_nslabs << IO_TLB_SHIFT;
 
-	/*
-	 * Get IO TLB memory from the low pages
-	 */
-	vstart = alloc_bootmem_low_pages(PAGE_ALIGN(bytes));
-	if (!vstart)
-		panic("Cannot allocate SWIOTLB buffer");
-
-	swiotlb_init_with_tbl(vstart, io_tlb_nslabs, verbose);
-}
+	/* Get IO TLB memory from the low pages */
+	vstart = alloc_bootmem_low_pages_nopanic(PAGE_ALIGN(bytes));
+	if (vstart && !swiotlb_init_with_tbl(vstart, io_tlb_nslabs, verbose))
+		return;
 
-void __init
-swiotlb_init(int verbose)
-{
-	swiotlb_init_with_default_size(64 * (1<<20), verbose);	/* default to 64MB */
+	if (io_tlb_start)
+		free_bootmem(io_tlb_start,
+				 PAGE_ALIGN(io_tlb_nslabs << IO_TLB_SHIFT));
+	pr_warn("Cannot allocate SWIOTLB buffer");
+	no_iotlb_memory = true;
 }
 
 /*
@@ -405,6 +413,9 @@ phys_addr_t swiotlb_tbl_map_single(struct device *hwdev,
 	unsigned long offset_slots;
 	unsigned long max_slots;
 
+	if (no_iotlb_memory)
+		panic("Can not allocate SWIOTLB buffer earlier and can't now provide you with the DMA bounce buffer");
+
 	mask = dma_get_seg_boundary(hwdev);
 
 	tbl_dma_addr &= mask;

      parent reply	other threads:[~2013-01-30  3:59 UTC|newest]

Thread overview: 89+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-01-24 20:19 [PATCH 00/35] x86, boot, 64bit: Add support for loading ramdisk and bzImage above 4G Yinghai Lu
2013-01-24 20:19 ` [PATCH 01/35] x86, mm: Fix page table early allocation offset checking Yinghai Lu
2013-01-30  1:20   ` [tip:x86/mm2] " tip-bot for Yinghai Lu
2013-01-24 20:19 ` [PATCH 02/35] x86: Handle multiple exactmaps and out of order exactmap Yinghai Lu
2013-01-24 20:19 ` [PATCH 03/35] x86, mm: Introduce memmap=reserveram Yinghai Lu
2013-01-24 20:19 ` [PATCH 04/35] x86: Clean up e820 add kernel range Yinghai Lu
2013-01-24 23:21   ` Jacob Shin
2013-01-30  1:21   ` [tip:x86/mm2] x86: Factor out e820_add_kernel_range() tip-bot for Yinghai Lu
2013-01-24 20:19 ` [PATCH 05/35] x86, 64bit, mm: Make pgd next calculation consistent with pud/pmd Yinghai Lu
2013-01-30  1:22   ` [tip:x86/mm2] " tip-bot for Yinghai Lu
2013-01-24 20:19 ` [PATCH 06/35] x86, realmode: Set real_mode permissions early Yinghai Lu
2013-01-30  1:23   ` [tip:x86/mm2] " tip-bot for Yinghai Lu
2013-01-24 20:19 ` [PATCH 07/35] x86, 64bit, mm: Add generic kernel/ident mapping helper Yinghai Lu
2013-01-30  1:24   ` [tip:x86/mm2] x86, 64bit, mm: Add generic kernel/ ident " tip-bot for Yinghai Lu
2013-01-24 20:19 ` [PATCH 08/35] x86, 64bit: Copy zero-page early Yinghai Lu
2013-01-30  1:25   ` [tip:x86/mm2] x86, 64bit: Copy struct boot_params early tip-bot for Yinghai Lu
2013-01-24 20:19 ` [PATCH 09/35] x86, 64bit, realmode: Use init_level4_pgt to set trapmoline_pgd directly Yinghai Lu
2013-01-30  1:27   ` [tip:x86/mm2] x86, 64bit, realmode: Use init_level4_pgt to set trampoline_pgd directly tip-bot for Yinghai Lu
2013-01-24 20:19 ` [PATCH 10/35] x86, realmode: Separate real_mode reserve and setup Yinghai Lu
2013-01-30  1:28   ` [tip:x86/mm2] " tip-bot for Yinghai Lu
2013-01-24 20:19 ` [PATCH 11/35] x86, 64bit: early #PF handler set page table Yinghai Lu
2013-01-30  1:29   ` [tip:x86/mm2] x86, 64bit: Use a #PF handler to materialize early mappings on demand tip-bot for H. Peter Anvin
2013-01-24 20:19 ` [PATCH 12/35] x86, 64bit: #PF handler set page to cover only 2M per #PF Yinghai Lu
2013-01-30  1:30   ` [tip:x86/mm2] " tip-bot for Yinghai Lu
2013-01-24 20:19 ` [PATCH 13/35] x86, 64bit: Don't set max_pfn_mapped wrong value early on native path Yinghai Lu
2013-01-30  1:31   ` [tip:x86/mm2] x86, 64bit: Don' t " tip-bot for Yinghai Lu
2013-01-24 20:19 ` [PATCH 14/35] x86: Merge early_reserve_initrd for 32bit and 64bit Yinghai Lu
2013-01-30  1:32   ` [tip:x86/mm2] " tip-bot for Yinghai Lu
2013-01-24 20:19 ` [PATCH 15/35] x86: Add get_ramdisk_image/size() Yinghai Lu
2013-01-30  1:34   ` [tip:x86/mm2] " tip-bot for Yinghai Lu
2013-01-24 20:19 ` [PATCH 16/35] x86, boot: Add get_cmd_line_ptr() Yinghai Lu
2013-01-30  1:35   ` [tip:x86/mm2] " tip-bot for Yinghai Lu
2013-01-24 20:19 ` [PATCH 17/35] x86, boot: Move checking of cmd_line_ptr out of common path Yinghai Lu
2013-01-30  1:36   ` [tip:x86/mm2] " tip-bot for Yinghai Lu
2013-01-24 20:19 ` [PATCH 18/35] x86, boot: Pass cmd_line_ptr with unsigned long instead Yinghai Lu
2013-01-30  1:37   ` [tip:x86/mm2] " tip-bot for Yinghai Lu
2013-01-24 20:20 ` [PATCH 19/35] x86, boot: Move verify_cpu.S and no_longmode down Yinghai Lu
2013-01-30  1:38   ` [tip:x86/mm2] " tip-bot for Yinghai Lu
2013-01-24 20:20 ` [PATCH 20/35] x86, boot: Move lldt/ltr out of 64bit code section Yinghai Lu
2013-01-30  1:39   ` [tip:x86/mm2] " tip-bot for Yinghai Lu
2013-01-24 20:20 ` [PATCH 21/35] x86, kexec: Remove 1024G limitation for kexec buffer on 64bit Yinghai Lu
2013-01-30  1:40   ` [tip:x86/mm2] " tip-bot for Yinghai Lu
2013-01-24 20:20 ` [PATCH 22/35] x86, kexec: Set ident mapping for kernel that is above max_pfn Yinghai Lu
2013-01-30  1:42   ` [tip:x86/mm2] " tip-bot for Yinghai Lu
2013-01-24 20:20 ` [PATCH 23/35] x86, kexec: Replace ident_mapping_init and init_level4_page Yinghai Lu
2013-01-30  1:43   ` [tip:x86/mm2] " tip-bot for Yinghai Lu
2013-01-24 20:20 ` [PATCH 24/35] x86, kexec, 64bit: Only set ident mapping for ram Yinghai Lu
2013-01-30  1:44   ` [tip:x86/mm2] " tip-bot for Yinghai Lu
2013-01-24 20:20 ` [PATCH 25/35] x86, boot: Add fields to support load bzImage and ramdisk above 4G Yinghai Lu
2013-01-28  0:07   ` [tip:x86/boot] x86, boot: Define the 2.12 bzImage boot protocol tip-bot for H. Peter Anvin
2013-01-29  9:48   ` [tip:x86/boot] x86, boot: Sanitize boot_params if not zeroed on creation tip-bot for H. Peter Anvin
2013-01-30  1:45   ` [tip:x86/mm2] x86, boot: enable support load bzImage and ramdisk above 4G tip-bot for Yinghai Lu
2013-01-30  1:54     ` Yinghai Lu
2013-01-30  2:18       ` H. Peter Anvin
2013-01-30  3:47   ` [tip:x86/mm2] x86, boot: Support loading bzImage, boot_params " tip-bot for Yinghai Lu
2013-01-24 20:20 ` [PATCH 26/35] x86, boot: Update comments about entries for 64bit image Yinghai Lu
2013-01-30  1:46   ` [tip:x86/mm2] " tip-bot for Yinghai Lu
2013-01-30  3:48   ` tip-bot for Yinghai Lu
2013-01-24 20:20 ` [PATCH 27/35] x86, boot: Not need to check setup_header version for setup_data Yinghai Lu
2013-01-30  1:47   ` [tip:x86/mm2] " tip-bot for Yinghai Lu
2013-01-30  3:49   ` tip-bot for Yinghai Lu
2013-01-24 20:20 ` [PATCH 28/35] memblock: Add memblock_mem_size() Yinghai Lu
2013-01-30  1:49   ` [tip:x86/mm2] " tip-bot for Yinghai Lu
2013-01-30  3:50   ` tip-bot for Yinghai Lu
2013-01-24 20:20 ` [PATCH 29/35] x86, kdump: Remove crashkernel range find limit for 64bit Yinghai Lu
2013-01-30  1:50   ` [tip:x86/mm2] " tip-bot for Yinghai Lu
2013-01-30  3:51   ` tip-bot for Yinghai Lu
2013-01-24 20:20 ` [PATCH 30/35] x86: Add Crash kernel low reservation Yinghai Lu
2013-01-30  1:51   ` [tip:x86/mm2] " tip-bot for Yinghai Lu
2013-02-07  5:14     ` Rob Landley
2013-02-07  6:39       ` Yinghai Lu
2013-01-30  3:52   ` tip-bot for Yinghai Lu
2013-01-24 20:20 ` [PATCH 31/35] x86: Merge early kernel reserve for 32bit and 64bit Yinghai Lu
2013-01-30  1:52   ` [tip:x86/mm2] " tip-bot for Yinghai Lu
2013-01-30  3:53   ` tip-bot for Yinghai Lu
2013-01-24 20:20 ` [PATCH 32/35] x86, 64bit, mm: Mark data/bss/brk to nx Yinghai Lu
2013-01-30  1:53   ` [tip:x86/mm2] " tip-bot for Yinghai Lu
2013-01-30  3:55   ` tip-bot for Yinghai Lu
2013-01-24 20:20 ` [PATCH 33/35] x86, 64bit, mm: hibernate use generic mapping_init Yinghai Lu
2013-01-24 22:50   ` Rafael J. Wysocki
2013-01-30  1:54   ` [tip:x86/mm2] " tip-bot for Yinghai Lu
2013-01-30  3:56   ` tip-bot for Yinghai Lu
2013-01-24 20:20 ` [PATCH 34/35] mm: Add alloc_bootmem_low_pages_nopanic() Yinghai Lu
2013-01-30  1:56   ` [tip:x86/mm2] " tip-bot for Yinghai Lu
2013-01-30  3:57   ` tip-bot for Yinghai Lu
2013-01-24 20:20 ` [PATCH 35/35] x86: Don't panic if can not alloc buffer for swiotlb Yinghai Lu
2013-01-25 16:47   ` Konrad Rzeszutek Wilk
2013-01-30  1:57   ` [tip:x86/mm2] x86: Don' t " tip-bot for Yinghai Lu
2013-01-30  3:58   ` tip-bot for Yinghai Lu [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=tip-ac2cbab21f318e19bc176a7f38a120cec835220f@git.kernel.org \
    --to=yinghai@kernel.org \
    --cc=andrzej.p@samsung.com \
    --cc=arnd@arndb.de \
    --cc=ebiederm@xmission.com \
    --cc=hpa@linux.intel.com \
    --cc=hpa@zytor.com \
    --cc=jeremy@goop.org \
    --cc=joro@8bytes.org \
    --cc=konrad.wilk@oracle.com \
    --cc=kyungmin.park@samsung.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tip-commits@vger.kernel.org \
    --cc=m.szyprowski@samsung.com \
    --cc=mingo@kernel.org \
    --cc=ralf@linux-mips.org \
    --cc=shuahkhan@gmail.com \
    --cc=tglx@linutronix.de \
    --subject='Re: [tip:x86/mm2] x86: Don'\'' t panic if can not alloc buffer for swiotlb' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
on how to clone and mirror all data and code used for this inbox