From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1757363Ab2EHWSk (ORCPT ); Tue, 8 May 2012 18:18:40 -0400 Received: from terminus.zytor.com ([198.137.202.10]:34465 "EHLO terminus.zytor.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751589Ab2EHWSh (ORCPT ); Tue, 8 May 2012 18:18:37 -0400 Date: Tue, 8 May 2012 15:18:19 -0700 From: tip-bot for Jarkko Sakkinen Message-ID: Cc: linux-kernel@vger.kernel.org, hpa@zytor.com, mingo@kernel.org, jarkko.sakkinen@intel.com, tglx@linutronix.de, rjw@sisk.pl, hpa@linux.intel.com, len.brown@intel.com Reply-To: mingo@kernel.org, hpa@zytor.com, linux-kernel@vger.kernel.org, tglx@linutronix.de, jarkko.sakkinen@intel.com, hpa@linux.intel.com, rjw@sisk.pl, len.brown@intel.com In-Reply-To: <1336501366-28617-7-git-send-email-jarkko.sakkinen@intel.com> References: <1336501366-28617-7-git-send-email-jarkko.sakkinen@intel.com> To: linux-tip-commits@vger.kernel.org Subject: [tip:x86/trampoline] x86, realmode: Move ACPI wakeup to unified realmode code Git-Commit-ID: c9b77ccb52a5c77233b0e557b7d4417b00ef4012 X-Mailer: tip-git-log-daemon Robot-ID: Robot-Unsubscribe: Contact to get blacklisted from these emails MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Content-Type: text/plain; charset=UTF-8 Content-Disposition: inline X-Greylist: Sender IP whitelisted, not delayed by milter-greylist-4.2.6 (terminus.zytor.com [127.0.0.1]); Tue, 08 May 2012 15:18:27 -0700 (PDT) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Commit-ID: c9b77ccb52a5c77233b0e557b7d4417b00ef4012 Gitweb: http://git.kernel.org/tip/c9b77ccb52a5c77233b0e557b7d4417b00ef4012 Author: Jarkko Sakkinen AuthorDate: Tue, 8 May 2012 21:22:29 +0300 Committer: H. Peter Anvin CommitDate: Tue, 8 May 2012 11:46:05 -0700 x86, realmode: Move ACPI wakeup to unified realmode code Migrated ACPI wakeup code to the real-mode blob. Code existing in .x86_trampoline can be completely removed. Static descriptor table in wakeup_asm.S is courtesy of H. Peter Anvin. Signed-off-by: Jarkko Sakkinen Link: http://lkml.kernel.org/r/1336501366-28617-7-git-send-email-jarkko.sakkinen@intel.com Cc: Rafael J. Wysocki Cc: Len Brown Signed-off-by: H. Peter Anvin --- arch/x86/include/asm/acpi.h | 2 - arch/x86/include/asm/realmode.h | 4 + arch/x86/include/asm/trampoline.h | 39 ----- arch/x86/kernel/Makefile | 1 - arch/x86/kernel/acpi/Makefile | 9 +- arch/x86/kernel/acpi/realmode/Makefile | 59 ------- arch/x86/kernel/acpi/realmode/wakeup.lds.S | 62 ------- arch/x86/kernel/acpi/sleep.c | 33 +---- arch/x86/kernel/acpi/sleep.h | 2 +- arch/x86/kernel/acpi/wakeup_rm.S | 12 -- arch/x86/kernel/head32.c | 1 - arch/x86/kernel/head64.c | 1 - arch/x86/kernel/mpparse.c | 1 - arch/x86/kernel/setup.c | 2 - arch/x86/kernel/tboot.c | 5 +- arch/x86/kernel/trampoline.c | 42 ----- arch/x86/kernel/trampoline_32.S | 83 ---------- arch/x86/kernel/trampoline_64.S | 171 -------------------- arch/x86/kernel/vmlinux.lds.S | 12 -- arch/x86/realmode/rm/Makefile | 4 + arch/x86/realmode/rm/header.S | 5 + arch/x86/realmode/rm/realmode.lds.S | 4 + .../realmode => realmode/rm/wakeup}/.gitignore | 0 arch/x86/realmode/rm/wakeup/Makefile | 33 ++++ .../realmode => realmode/rm/wakeup}/bioscall.S | 0 .../acpi/realmode => realmode/rm/wakeup}/copy.S | 0 .../acpi/realmode => realmode/rm/wakeup}/regs.c | 0 .../realmode => realmode/rm/wakeup}/video-bios.c | 0 .../realmode => realmode/rm/wakeup}/video-mode.c | 0 .../realmode => realmode/rm/wakeup}/video-vesa.c | 0 .../realmode => realmode/rm/wakeup}/video-vga.c | 0 .../realmode => realmode/rm/wakeup}/wakemain.c | 3 +- .../acpi/realmode => realmode/rm/wakeup}/wakeup.h | 9 +- .../wakeup.S => realmode/rm/wakeup/wakeup_asm.S} | 69 +++++--- drivers/acpi/sleep.c | 8 +- 35 files changed, 111 insertions(+), 565 deletions(-) diff --git a/arch/x86/include/asm/acpi.h b/arch/x86/include/asm/acpi.h index 610001d..724aa44 100644 --- a/arch/x86/include/asm/acpi.h +++ b/arch/x86/include/asm/acpi.h @@ -29,7 +29,6 @@ #include #include #include -#include #define COMPILER_DEPENDENT_INT64 long long #define COMPILER_DEPENDENT_UINT64 unsigned long long @@ -118,7 +117,6 @@ static inline void acpi_disable_pci(void) extern int acpi_suspend_lowlevel(void); extern const unsigned char acpi_wakeup_code[]; -#define acpi_wakeup_address (__pa(TRAMPOLINE_SYM(acpi_wakeup_code))) /* early initialization routine */ extern void acpi_reserve_wakeup_memory(void); diff --git a/arch/x86/include/asm/realmode.h b/arch/x86/include/asm/realmode.h index 9b4a5da..1bfc74d 100644 --- a/arch/x86/include/asm/realmode.h +++ b/arch/x86/include/asm/realmode.h @@ -24,6 +24,10 @@ struct real_mode_header { u32 level3_ident_pgt; u32 level3_kernel_pgt; #endif +#ifdef CONFIG_ACPI_SLEEP + u32 wakeup_start; + u32 wakeup_header; +#endif } __attribute__((__packed__)); extern struct real_mode_header real_mode_header; diff --git a/arch/x86/include/asm/trampoline.h b/arch/x86/include/asm/trampoline.h deleted file mode 100644 index feca311..0000000 --- a/arch/x86/include/asm/trampoline.h +++ /dev/null @@ -1,39 +0,0 @@ -#ifndef _ASM_X86_TRAMPOLINE_H -#define _ASM_X86_TRAMPOLINE_H - -#ifndef __ASSEMBLY__ - -#include -#include - -/* - * Trampoline 80x86 program as an array. These are in the init rodata - * segment, but that's okay, because we only care about the relative - * addresses of the symbols. - */ -extern const unsigned char x86_trampoline_start []; -extern const unsigned char x86_trampoline_end []; -extern unsigned char *x86_trampoline_base; - -extern unsigned long init_rsp; -extern unsigned long initial_code; -extern unsigned long initial_gs; - -extern void __init setup_trampolines(void); - -extern const unsigned char trampoline_data[]; -extern const unsigned char trampoline_status[]; - -#define TRAMPOLINE_SYM(x) \ - ((void *)(x86_trampoline_base + \ - ((const unsigned char *)(x) - x86_trampoline_start))) - -/* Address of the SMP trampoline */ -static inline unsigned long trampoline_address(void) -{ - return virt_to_phys(TRAMPOLINE_SYM(trampoline_data)); -} - -#endif /* __ASSEMBLY__ */ - -#endif /* _ASM_X86_TRAMPOLINE_H */ diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index b71ef35..4a20f44 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -35,7 +35,6 @@ obj-y += tsc.o io_delay.o rtc.o obj-y += pci-iommu_table.o obj-y += resource.o -obj-y += trampoline.o trampoline_$(BITS).o obj-y += realmode.o obj-y += process.o obj-y += i387.o xsave.o diff --git a/arch/x86/kernel/acpi/Makefile b/arch/x86/kernel/acpi/Makefile index 6f35260..163b225 100644 --- a/arch/x86/kernel/acpi/Makefile +++ b/arch/x86/kernel/acpi/Makefile @@ -1,14 +1,7 @@ -subdir- := realmode - obj-$(CONFIG_ACPI) += boot.o -obj-$(CONFIG_ACPI_SLEEP) += sleep.o wakeup_rm.o wakeup_$(BITS).o +obj-$(CONFIG_ACPI_SLEEP) += sleep.o wakeup_$(BITS).o ifneq ($(CONFIG_ACPI_PROCESSOR),) obj-y += cstate.o endif -$(obj)/wakeup_rm.o: $(obj)/realmode/wakeup.bin - -$(obj)/realmode/wakeup.bin: FORCE - $(Q)$(MAKE) $(build)=$(obj)/realmode - diff --git a/arch/x86/kernel/acpi/realmode/Makefile b/arch/x86/kernel/acpi/realmode/Makefile deleted file mode 100644 index 6a564ac..0000000 --- a/arch/x86/kernel/acpi/realmode/Makefile +++ /dev/null @@ -1,59 +0,0 @@ -# -# arch/x86/kernel/acpi/realmode/Makefile -# -# This file is subject to the terms and conditions of the GNU General Public -# License. See the file "COPYING" in the main directory of this archive -# for more details. -# - -always := wakeup.bin -targets := wakeup.elf wakeup.lds - -wakeup-y += wakeup.o wakemain.o video-mode.o copy.o bioscall.o regs.o - -# The link order of the video-*.o modules can matter. In particular, -# video-vga.o *must* be listed first, followed by video-vesa.o. -# Hardware-specific drivers should follow in the order they should be -# probed, and video-bios.o should typically be last. -wakeup-y += video-vga.o -wakeup-y += video-vesa.o -wakeup-y += video-bios.o - -targets += $(wakeup-y) - -bootsrc := $(src)/../../../boot - -# --------------------------------------------------------------------------- - -# How to compile the 16-bit code. Note we always compile for -march=i386, -# that way we can complain to the user if the CPU is insufficient. -# Compile with _SETUP since this is similar to the boot-time setup code. -KBUILD_CFLAGS := $(LINUXINCLUDE) -g -Os -D_SETUP -D_WAKEUP -D__KERNEL__ \ - -I$(srctree)/$(bootsrc) \ - $(cflags-y) \ - -Wall -Wstrict-prototypes \ - -march=i386 -mregparm=3 \ - -include $(srctree)/$(bootsrc)/code16gcc.h \ - -fno-strict-aliasing -fomit-frame-pointer \ - $(call cc-option, -ffreestanding) \ - $(call cc-option, -fno-toplevel-reorder,\ - $(call cc-option, -fno-unit-at-a-time)) \ - $(call cc-option, -fno-stack-protector) \ - $(call cc-option, -mpreferred-stack-boundary=2) -KBUILD_CFLAGS += $(call cc-option, -m32) -KBUILD_AFLAGS := $(KBUILD_CFLAGS) -D__ASSEMBLY__ -GCOV_PROFILE := n - -WAKEUP_OBJS = $(addprefix $(obj)/,$(wakeup-y)) - -LDFLAGS_wakeup.elf := -T - -CPPFLAGS_wakeup.lds += -P -C - -$(obj)/wakeup.elf: $(obj)/wakeup.lds $(WAKEUP_OBJS) FORCE - $(call if_changed,ld) - -OBJCOPYFLAGS_wakeup.bin := -O binary - -$(obj)/wakeup.bin: $(obj)/wakeup.elf FORCE - $(call if_changed,objcopy) diff --git a/arch/x86/kernel/acpi/realmode/wakeup.lds.S b/arch/x86/kernel/acpi/realmode/wakeup.lds.S deleted file mode 100644 index d4f8010..0000000 --- a/arch/x86/kernel/acpi/realmode/wakeup.lds.S +++ /dev/null @@ -1,62 +0,0 @@ -/* - * wakeup.ld - * - * Linker script for the real-mode wakeup code - */ -#undef i386 -#include "wakeup.h" - -OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386") -OUTPUT_ARCH(i386) -ENTRY(_start) - -SECTIONS -{ - . = 0; - .jump : { - *(.jump) - } = 0x90909090 - - . = WAKEUP_HEADER_OFFSET; - .header : { - *(.header) - } - - . = ALIGN(16); - .text : { - *(.text*) - } = 0x90909090 - - . = ALIGN(16); - .rodata : { - *(.rodata*) - } - - .videocards : { - video_cards = .; - *(.videocards) - video_cards_end = .; - } - - . = ALIGN(16); - .data : { - *(.data*) - } - - . = ALIGN(16); - .bss : { - __bss_start = .; - *(.bss) - __bss_end = .; - } - - .signature : { - *(.signature) - } - - _end = .; - - /DISCARD/ : { - *(.note*) - } -} diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c index 146a49c..d941b62 100644 --- a/arch/x86/kernel/acpi/sleep.c +++ b/arch/x86/kernel/acpi/sleep.c @@ -14,8 +14,9 @@ #include #include #include +#include -#include "realmode/wakeup.h" +#include "../../realmode/rm/wakeup/wakeup.h" #include "sleep.h" unsigned long acpi_realmode_flags; @@ -36,13 +37,9 @@ asmlinkage void acpi_enter_s3(void) */ int acpi_suspend_lowlevel(void) { - struct wakeup_header *header; - /* address in low memory of the wakeup routine. */ - char *acpi_realmode; + struct wakeup_header *header = + (struct wakeup_header *) __va(real_mode_header.wakeup_header); - acpi_realmode = TRAMPOLINE_SYM(acpi_wakeup_code); - - header = (struct wakeup_header *)(acpi_realmode + WAKEUP_HEADER_OFFSET); if (header->signature != WAKEUP_HEADER_SIGNATURE) { printk(KERN_ERR "wakeup header does not match\n"); return -EINVAL; @@ -50,27 +47,6 @@ int acpi_suspend_lowlevel(void) header->video_mode = saved_video_mode; - header->wakeup_jmp_seg = acpi_wakeup_address >> 4; - - /* - * Set up the wakeup GDT. We set these up as Big Real Mode, - * that is, with limits set to 4 GB. At least the Lenovo - * Thinkpad X61 is known to need this for the video BIOS - * initialization quirk to work; this is likely to also - * be the case for other laptops or integrated video devices. - */ - - /* GDT[0]: GDT self-pointer */ - header->wakeup_gdt[0] = - (u64)(sizeof(header->wakeup_gdt) - 1) + - ((u64)__pa(&header->wakeup_gdt) << 16); - /* GDT[1]: big real mode-like code segment */ - header->wakeup_gdt[1] = - GDT_ENTRY(0x809b, acpi_wakeup_address, 0xfffff); - /* GDT[2]: big real mode-like data segment */ - header->wakeup_gdt[2] = - GDT_ENTRY(0x8093, acpi_wakeup_address, 0xfffff); - #ifndef CONFIG_64BIT store_gdt((struct desc_ptr *)&header->pmode_gdt); @@ -95,7 +71,6 @@ int acpi_suspend_lowlevel(void) header->pmode_cr3 = (u32)__pa(&initial_page_table); saved_magic = 0x12345678; #else /* CONFIG_64BIT */ - header->trampoline_segment = trampoline_address() >> 4; #ifdef CONFIG_SMP stack_start = (unsigned long)temp_stack + sizeof(temp_stack); early_gdt_descr.address = diff --git a/arch/x86/kernel/acpi/sleep.h b/arch/x86/kernel/acpi/sleep.h index d68677a..5653a57 100644 --- a/arch/x86/kernel/acpi/sleep.h +++ b/arch/x86/kernel/acpi/sleep.h @@ -2,8 +2,8 @@ * Variables and functions used by the code in sleep.c */ -#include #include +#include extern unsigned long saved_video_mode; extern long saved_magic; diff --git a/arch/x86/kernel/acpi/wakeup_rm.S b/arch/x86/kernel/acpi/wakeup_rm.S deleted file mode 100644 index 63b8ab5..0000000 --- a/arch/x86/kernel/acpi/wakeup_rm.S +++ /dev/null @@ -1,12 +0,0 @@ -/* - * Wrapper script for the realmode binary as a transport object - * before copying to low memory. - */ -#include - - .section ".x86_trampoline","a" - .balign PAGE_SIZE - .globl acpi_wakeup_code -acpi_wakeup_code: - .incbin "arch/x86/kernel/acpi/realmode/wakeup.bin" - .size acpi_wakeup_code, .-acpi_wakeup_code diff --git a/arch/x86/kernel/head32.c b/arch/x86/kernel/head32.c index 51ff186..c18f59d 100644 --- a/arch/x86/kernel/head32.c +++ b/arch/x86/kernel/head32.c @@ -14,7 +14,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c index 3a3b779..037df57 100644 --- a/arch/x86/kernel/head64.c +++ b/arch/x86/kernel/head64.c @@ -24,7 +24,6 @@ #include #include #include -#include #include static void __init zap_identity_mappings(void) diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index ca470e4..f44d311 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -27,7 +27,6 @@ #include #include #include -#include #include #include diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index 56e4124..7a14fec 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -73,7 +73,6 @@ #include #include -#include #include #include #include @@ -918,7 +917,6 @@ void __init setup_arch(char **cmdline_p) printk(KERN_DEBUG "initial memory mapped : 0 - %08lx\n", max_pfn_mapped< #include -#include +#include #include #include #include @@ -201,7 +201,8 @@ static int tboot_setup_sleep(void) add_mac_region(e820.map[i].addr, e820.map[i].size); } - tboot->acpi_sinfo.kernel_s3_resume_vector = acpi_wakeup_address; + tboot->acpi_sinfo.kernel_s3_resume_vector = + real_mode_header.wakeup_start; return 0; } diff --git a/arch/x86/kernel/trampoline.c b/arch/x86/kernel/trampoline.c deleted file mode 100644 index a73b610..0000000 --- a/arch/x86/kernel/trampoline.c +++ /dev/null @@ -1,42 +0,0 @@ -#include -#include - -#include -#include -#include - -unsigned char *x86_trampoline_base; - -void __init setup_trampolines(void) -{ - phys_addr_t mem; - size_t size = PAGE_ALIGN(x86_trampoline_end - x86_trampoline_start); - - /* Has to be in very low memory so we can execute real-mode AP code. */ - mem = memblock_find_in_range(0, 1<<20, size, PAGE_SIZE); - if (!mem) - panic("Cannot allocate trampoline\n"); - - x86_trampoline_base = __va(mem); - memblock_reserve(mem, size); - - printk(KERN_DEBUG "Base memory trampoline at [%p] %llx size %zu\n", - x86_trampoline_base, (unsigned long long)mem, size); - - memcpy(x86_trampoline_base, x86_trampoline_start, size); -} - -/* - * setup_trampolines() gets called very early, to guarantee the - * availability of low memory. This is before the proper kernel page - * tables are set up, so we cannot set page permissions in that - * function. Thus, we use an arch_initcall instead. - */ -static int __init configure_trampolines(void) -{ - size_t size = PAGE_ALIGN(x86_trampoline_end - x86_trampoline_start); - - set_memory_x((unsigned long)x86_trampoline_base, size >> PAGE_SHIFT); - return 0; -} -arch_initcall(configure_trampolines); diff --git a/arch/x86/kernel/trampoline_32.S b/arch/x86/kernel/trampoline_32.S deleted file mode 100644 index 451c0a7..0000000 --- a/arch/x86/kernel/trampoline_32.S +++ /dev/null @@ -1,83 +0,0 @@ -/* - * - * Trampoline.S Derived from Setup.S by Linus Torvalds - * - * 4 Jan 1997 Michael Chastain: changed to gnu as. - * - * This is only used for booting secondary CPUs in SMP machine - * - * Entry: CS:IP point to the start of our code, we are - * in real mode with no stack, but the rest of the - * trampoline page to make our stack and everything else - * is a mystery. - * - * We jump into arch/x86/kernel/head_32.S. - * - * On entry to trampoline_data, the processor is in real mode - * with 16-bit addressing and 16-bit data. CS has some value - * and IP is zero. Thus, data addresses need to be absolute - * (no relocation) and are taken with regard to r_base. - * - * If you work on this file, check the object module with - * objdump --reloc to make sure there are no relocation - * entries except for: - * - * TYPE VALUE - * R_386_32 startup_32_smp - * R_386_32 boot_gdt - */ - -#include -#include -#include -#include - -#ifdef CONFIG_SMP - - .section ".x86_trampoline","a" - .balign PAGE_SIZE - .code16 - -ENTRY(trampoline_data) -r_base = . - wbinvd # Needed for NUMA-Q should be harmless for others - mov %cs, %ax # Code and data in the same place - mov %ax, %ds - - cli # We should be safe anyway - - movl $0xA5A5A5A5, trampoline_status - r_base - # write marker for master knows we're running - - /* GDT tables in non default location kernel can be beyond 16MB and - * lgdt will not be able to load the address as in real mode default - * operand size is 16bit. Use lgdtl instead to force operand size - * to 32 bit. - */ - - lidtl boot_idt_descr - r_base # load idt with 0, 0 - lgdtl boot_gdt_descr - r_base # load gdt with whatever is appropriate - - xor %ax, %ax - inc %ax # protected mode (PE) bit - lmsw %ax # into protected mode - # flush prefetch and jump to startup_32_smp in arch/i386/kernel/head.S - ljmpl $__BOOT_CS, $(startup_32_smp-__PAGE_OFFSET) - - # These need to be in the same 64K segment as the above; - # hence we don't use the boot_gdt_descr defined in head.S -boot_gdt_descr: - .word __BOOT_DS + 7 # gdt limit - .long boot_gdt - __PAGE_OFFSET # gdt base - -boot_idt_descr: - .word 0 # idt limit = 0 - .long 0 # idt base = 0L - -ENTRY(trampoline_status) - .long 0 - -.globl trampoline_end -trampoline_end: - -#endif /* CONFIG_SMP */ diff --git a/arch/x86/kernel/trampoline_64.S b/arch/x86/kernel/trampoline_64.S deleted file mode 100644 index 09ff517..0000000 --- a/arch/x86/kernel/trampoline_64.S +++ /dev/null @@ -1,171 +0,0 @@ -/* - * - * Trampoline.S Derived from Setup.S by Linus Torvalds - * - * 4 Jan 1997 Michael Chastain: changed to gnu as. - * 15 Sept 2005 Eric Biederman: 64bit PIC support - * - * Entry: CS:IP point to the start of our code, we are - * in real mode with no stack, but the rest of the - * trampoline page to make our stack and everything else - * is a mystery. - * - * On entry to trampoline_data, the processor is in real mode - * with 16-bit addressing and 16-bit data. CS has some value - * and IP is zero. Thus, data addresses need to be absolute - * (no relocation) and are taken with regard to r_base. - * - * With the addition of trampoline_level4_pgt this code can - * now enter a 64bit kernel that lives at arbitrary 64bit - * physical addresses. - * - * If you work on this file, check the object module with objdump - * --full-contents --reloc to make sure there are no relocation - * entries. - */ - -#include -#include -#include -#include -#include -#include -#include - - .section ".x86_trampoline","a" - .balign PAGE_SIZE - .code16 - -ENTRY(trampoline_data) -r_base = . - cli # We should be safe anyway - wbinvd - mov %cs, %ax # Code and data in the same place - mov %ax, %ds - mov %ax, %es - mov %ax, %ss - - - movl $0xA5A5A5A5, trampoline_status - r_base - # write marker for master knows we're running - - # Setup stack - movw $(trampoline_stack_end - r_base), %sp - - call verify_cpu # Verify the cpu supports long mode - testl %eax, %eax # Check for return code - jnz no_longmode - - mov %cs, %ax - movzx %ax, %esi # Find the 32bit trampoline location - shll $4, %esi - - # Fixup the absolute vectors - leal (startup_32 - r_base)(%esi), %eax - movl %eax, startup_32_vector - r_base - leal (startup_64 - r_base)(%esi), %eax - movl %eax, startup_64_vector - r_base - leal (tgdt - r_base)(%esi), %eax - movl %eax, (tgdt + 2 - r_base) - - /* - * GDT tables in non default location kernel can be beyond 16MB and - * lgdt will not be able to load the address as in real mode default - * operand size is 16bit. Use lgdtl instead to force operand size - * to 32 bit. - */ - - lidtl tidt - r_base # load idt with 0, 0 - lgdtl tgdt - r_base # load gdt with whatever is appropriate - - mov $X86_CR0_PE, %ax # protected mode (PE) bit - lmsw %ax # into protected mode - - # flush prefetch and jump to startup_32 - ljmpl *(startup_32_vector - r_base) - - .code32 - .balign 4 -startup_32: - movl $__KERNEL_DS, %eax # Initialize the %ds segment register - movl %eax, %ds - - movl $X86_CR4_PAE, %eax - movl %eax, %cr4 # Enable PAE mode - - # Setup trampoline 4 level pagetables - leal (trampoline_level4_pgt - r_base)(%esi), %eax - movl %eax, %cr3 - - movl $MSR_EFER, %ecx - movl $(1 << _EFER_LME), %eax # Enable Long Mode - xorl %edx, %edx - wrmsr - - # Enable paging and in turn activate Long Mode - # Enable protected mode - movl $(X86_CR0_PG | X86_CR0_PE), %eax - movl %eax, %cr0 - - /* - * At this point we're in long mode but in 32bit compatibility mode - * with EFER.LME = 1, CS.L = 0, CS.D = 1 (and in turn - * EFER.LMA = 1). Now we want to jump in 64bit mode, to do that we use - * the new gdt/idt that has __KERNEL_CS with CS.L = 1. - */ - ljmp *(startup_64_vector - r_base)(%esi) - - .code64 - .balign 4 -startup_64: - # Now jump into the kernel using virtual addresses - movq $secondary_startup_64, %rax - jmp *%rax - - .code16 -no_longmode: - hlt - jmp no_longmode -#include "verify_cpu.S" - - .balign 4 - # Careful these need to be in the same 64K segment as the above; -tidt: - .word 0 # idt limit = 0 - .word 0, 0 # idt base = 0L - - # Duplicate the global descriptor table - # so the kernel can live anywhere - .balign 4 -tgdt: - .short tgdt_end - tgdt # gdt limit - .long tgdt - r_base - .short 0 - .quad 0x00cf9b000000ffff # __KERNEL32_CS - .quad 0x00af9b000000ffff # __KERNEL_CS - .quad 0x00cf93000000ffff # __KERNEL_DS -tgdt_end: - - .balign 4 -startup_32_vector: - .long startup_32 - r_base - .word __KERNEL32_CS, 0 - - .balign 4 -startup_64_vector: - .long startup_64 - r_base - .word __KERNEL_CS, 0 - - .balign 4 -ENTRY(trampoline_status) - .long 0 - -trampoline_stack: - .org 0x1000 -trampoline_stack_end: -ENTRY(trampoline_level4_pgt) - .quad level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE - .fill 510,8,0 - .quad level3_kernel_pgt - __START_KERNEL_map + _KERNPG_TABLE - -ENTRY(trampoline_end) diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S index 0f703f1..22a1530 100644 --- a/arch/x86/kernel/vmlinux.lds.S +++ b/arch/x86/kernel/vmlinux.lds.S @@ -197,18 +197,6 @@ SECTIONS INIT_DATA_SECTION(16) - /* - * Code and data for a variety of lowlevel trampolines, to be - * copied into base memory (< 1 MiB) during initialization. - * Since it is copied early, the main copy can be discarded - * afterwards. - */ - .x86_trampoline : AT(ADDR(.x86_trampoline) - LOAD_OFFSET) { - x86_trampoline_start = .; - *(.x86_trampoline) - x86_trampoline_end = .; - } - .x86_cpu_dev.init : AT(ADDR(.x86_cpu_dev.init) - LOAD_OFFSET) { __x86_cpu_dev_start = .; *(.x86_cpu_dev.init) diff --git a/arch/x86/realmode/rm/Makefile b/arch/x86/realmode/rm/Makefile index 56ec64f..2432acb 100644 --- a/arch/x86/realmode/rm/Makefile +++ b/arch/x86/realmode/rm/Makefile @@ -14,9 +14,13 @@ always := realmode.bin realmode-y += header.o realmode-$(CONFIG_X86_32) += reboot_32.o realmode-y += trampoline_$(BITS).o +realmode-$(CONFIG_ACPI_SLEEP) += wakeup/wakeup.o targets += $(realmode-y) +$(obj)/wakeup/wakeup.o: FORCE + $(Q)$(MAKE) $(build)=$(obj)/wakeup $@ + REALMODE_OBJS = $(addprefix $(obj)/,$(realmode-y)) sed-pasyms := -n -r -e 's/^([0-9a-fA-F]+) [ABCDGRSTVW] (.+)$$/pa_\2 = \2;/p' diff --git a/arch/x86/realmode/rm/header.S b/arch/x86/realmode/rm/header.S index a979004..730b131 100644 --- a/arch/x86/realmode/rm/header.S +++ b/arch/x86/realmode/rm/header.S @@ -27,4 +27,9 @@ ENTRY(real_mode_header) .long pa_level3_ident_pgt .long pa_level3_kernel_pgt #endif + /* ACPI sleep */ +#ifdef CONFIG_ACPI_SLEEP + .long pa_wakeup_start + .long pa_wakeup_header +#endif END(real_mode_header) diff --git a/arch/x86/realmode/rm/realmode.lds.S b/arch/x86/realmode/rm/realmode.lds.S index c5b8a4f..91b83ea 100644 --- a/arch/x86/realmode/rm/realmode.lds.S +++ b/arch/x86/realmode/rm/realmode.lds.S @@ -25,6 +25,10 @@ SECTIONS .rodata : { *(.rodata) *(.rodata.*) + . = ALIGN(16); + video_cards = .; + *(.videocards) + video_cards_end = .; } . = ALIGN(PAGE_SIZE); diff --git a/arch/x86/kernel/acpi/realmode/.gitignore b/arch/x86/realmode/rm/wakeup/.gitignore similarity index 100% rename from arch/x86/kernel/acpi/realmode/.gitignore rename to arch/x86/realmode/rm/wakeup/.gitignore diff --git a/arch/x86/realmode/rm/wakeup/Makefile b/arch/x86/realmode/rm/wakeup/Makefile new file mode 100644 index 0000000..4c85332 --- /dev/null +++ b/arch/x86/realmode/rm/wakeup/Makefile @@ -0,0 +1,33 @@ +# +# arch/x86/kernel/acpi/realmode/Makefile +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# + +always := wakeup.o + +wakeup-y += wakeup_asm.o wakemain.o video-mode.o +wakeup-y += copy.o bioscall.o regs.o + +# The link order of the video-*.o modules can matter. In particular, +# video-vga.o *must* be listed first, followed by video-vesa.o. +# Hardware-specific drivers should follow in the order they should be +# probed, and video-bios.o should typically be last. +wakeup-y += video-vga.o +wakeup-y += video-vesa.o +wakeup-y += video-bios.o + +targets += $(wakeup-y) + +WAKEUP_OBJS = $(addprefix $(obj)/,$(wakeup-y)) + +LDFLAGS_wakeup.o := -m elf_i386 -r +$(obj)/wakeup.o: $(WAKEUP_OBJS) FORCE + $(call if_changed,ld) + +bootsrc := $(src)/../../../boot + +ccflags-y += -D_WAKEUP -I$(srctree)/$(bootsrc) +asflags-y += -D_WAKEUP -I$(srctree)/$(bootsrc) diff --git a/arch/x86/kernel/acpi/realmode/bioscall.S b/arch/x86/realmode/rm/wakeup/bioscall.S similarity index 100% rename from arch/x86/kernel/acpi/realmode/bioscall.S rename to arch/x86/realmode/rm/wakeup/bioscall.S diff --git a/arch/x86/kernel/acpi/realmode/copy.S b/arch/x86/realmode/rm/wakeup/copy.S similarity index 100% rename from arch/x86/kernel/acpi/realmode/copy.S rename to arch/x86/realmode/rm/wakeup/copy.S diff --git a/arch/x86/kernel/acpi/realmode/regs.c b/arch/x86/realmode/rm/wakeup/regs.c similarity index 100% rename from arch/x86/kernel/acpi/realmode/regs.c rename to arch/x86/realmode/rm/wakeup/regs.c diff --git a/arch/x86/kernel/acpi/realmode/video-bios.c b/arch/x86/realmode/rm/wakeup/video-bios.c similarity index 100% rename from arch/x86/kernel/acpi/realmode/video-bios.c rename to arch/x86/realmode/rm/wakeup/video-bios.c diff --git a/arch/x86/kernel/acpi/realmode/video-mode.c b/arch/x86/realmode/rm/wakeup/video-mode.c similarity index 100% rename from arch/x86/kernel/acpi/realmode/video-mode.c rename to arch/x86/realmode/rm/wakeup/video-mode.c diff --git a/arch/x86/kernel/acpi/realmode/video-vesa.c b/arch/x86/realmode/rm/wakeup/video-vesa.c similarity index 100% rename from arch/x86/kernel/acpi/realmode/video-vesa.c rename to arch/x86/realmode/rm/wakeup/video-vesa.c diff --git a/arch/x86/kernel/acpi/realmode/video-vga.c b/arch/x86/realmode/rm/wakeup/video-vga.c similarity index 100% rename from arch/x86/kernel/acpi/realmode/video-vga.c rename to arch/x86/realmode/rm/wakeup/video-vga.c diff --git a/arch/x86/kernel/acpi/realmode/wakemain.c b/arch/x86/realmode/rm/wakeup/wakemain.c similarity index 98% rename from arch/x86/kernel/acpi/realmode/wakemain.c rename to arch/x86/realmode/rm/wakeup/wakemain.c index 883962d..91405d5 100644 --- a/arch/x86/kernel/acpi/realmode/wakemain.c +++ b/arch/x86/realmode/rm/wakeup/wakemain.c @@ -65,7 +65,8 @@ void main(void) { /* Kill machine if structures are wrong */ if (wakeup_header.real_magic != 0x12345678) - while (1); + while (1) + ; if (wakeup_header.realmode_flags & 4) send_morse("...-"); diff --git a/arch/x86/kernel/acpi/realmode/wakeup.h b/arch/x86/realmode/rm/wakeup/wakeup.h similarity index 82% rename from arch/x86/kernel/acpi/realmode/wakeup.h rename to arch/x86/realmode/rm/wakeup/wakeup.h index 97a29e1..2dfaf06 100644 --- a/arch/x86/kernel/acpi/realmode/wakeup.h +++ b/arch/x86/realmode/rm/wakeup/wakeup.h @@ -12,9 +12,8 @@ /* This must match data at wakeup.S */ struct wakeup_header { u16 video_mode; /* Video mode number */ - u16 _jmp1; /* ljmpl opcode, 32-bit only */ u32 pmode_entry; /* Protected mode resume point, 32-bit only */ - u16 _jmp2; /* CS value, 32-bit only */ + u16 pmode_cs; u32 pmode_cr0; /* Protected mode cr0 */ u32 pmode_cr3; /* Protected mode cr3 */ u32 pmode_cr4; /* Protected mode cr4 */ @@ -26,12 +25,6 @@ struct wakeup_header { u32 pmode_behavior; /* Wakeup routine behavior flags */ u32 realmode_flags; u32 real_magic; - u16 trampoline_segment; /* segment with trampoline code, 64-bit only */ - u8 _pad1; - u8 wakeup_jmp; - u16 wakeup_jmp_off; - u16 wakeup_jmp_seg; - u64 wakeup_gdt[3]; u32 signature; /* To check we have correct structure */ } __attribute__((__packed__)); diff --git a/arch/x86/kernel/acpi/realmode/wakeup.S b/arch/x86/realmode/rm/wakeup/wakeup_asm.S similarity index 72% rename from arch/x86/kernel/acpi/realmode/wakeup.S rename to arch/x86/realmode/rm/wakeup/wakeup_asm.S index b4fd836..b61126c 100644 --- a/arch/x86/kernel/acpi/realmode/wakeup.S +++ b/arch/x86/realmode/rm/wakeup/wakeup_asm.S @@ -8,21 +8,15 @@ #include #include "wakeup.h" - .code16 - .section ".jump", "ax" - .globl _start -_start: - cli - jmp wakeup_code + .code16 /* This should match the structure in wakeup.h */ - .section ".header", "a" + .section ".data", "aw" .globl wakeup_header wakeup_header: video_mode: .short 0 /* Video mode number */ -pmode_return: .byte 0x66, 0xea /* ljmpl */ - .long 0 /* offset goes here */ - .short __KERNEL_CS +pmode_entry: .long 0 +pmode_cs: .short __KERNEL_CS pmode_cr0: .long 0 /* Saved %cr0 */ pmode_cr3: .long 0 /* Saved %cr3 */ pmode_cr4: .long 0 /* Saved %cr4 */ @@ -32,19 +26,20 @@ pmode_misc_en: .quad 0 /* Saved MISC_ENABLE MSR */ pmode_behavior: .long 0 /* Wakeup behavior flags */ realmode_flags: .long 0 real_magic: .long 0 -trampoline_segment: .word 0 -_pad1: .byte 0 -wakeup_jmp: .byte 0xea /* ljmpw */ -wakeup_jmp_off: .word 3f -wakeup_jmp_seg: .word 0 -wakeup_gdt: .quad 0, 0, 0 signature: .long WAKEUP_HEADER_SIGNATURE + .size wakeup_header, .-wakeup_header .text .code16 -wakeup_code: + .globl wakeup_start +wakeup_start: + cli cld + .byte 0xea /* ljmpw */ + .word 3f + .word real_mode_seg +3: /* Apparently some dimwit BIOS programmers don't know how to program a PM to RM transition, and we might end up here with junk in the data segment descriptor registers. The only way @@ -54,8 +49,7 @@ wakeup_code: movl %cr0, %eax orb $X86_CR0_PE, %al movl %eax, %cr0 - jmp 1f -1: ljmpw $8, $2f + ljmpw $8, $2f 2: movw %cx, %ds movw %cx, %es @@ -65,7 +59,9 @@ wakeup_code: andb $~X86_CR0_PE, %al movl %eax, %cr0 - jmp wakeup_jmp + .byte 0xea /* ljmpw */ + .word 3f + .word real_mode_seg 3: /* Set up segments */ movw %cs, %ax @@ -130,12 +126,9 @@ wakeup_code: /* This really couldn't... */ movl pmode_cr0, %eax movl %eax, %cr0 - jmp pmode_return + ljmpl *pmode_entry #else - pushw $0 - pushw trampoline_segment - pushw $0 - lret + jmp trampoline_data #endif bogus_real_magic: @@ -143,6 +136,32 @@ bogus_real_magic: hlt jmp 1b + .section ".rodata","a" + + /* + * Set up the wakeup GDT. We set these up as Big Real Mode, + * that is, with limits set to 4 GB. At least the Lenovo + * Thinkpad X61 is known to need this for the video BIOS + * initialization quirk to work; this is likely to also + * be the case for other laptops or integrated video devices. + */ + + .globl wakeup_gdt + .balign 16 +wakeup_gdt: + .word 3*8-1 /* Self-descriptor */ + .long pa_wakeup_gdt + .word 0 + + .word 0xffff /* 16-bit code segment @ real_mode_base */ + .long 0x9b000000 + pa_real_mode_base + .word 0x008f /* big real mode */ + + .word 0xffff /* 16-bit data segment @ real_mode_base */ + .long 0x93000000 + pa_real_mode_base + .word 0x008f /* big real mode */ + .size wakeup_gdt, .-wakeup_gdt + .data .balign 8 diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index eb6fd23..e77aa4a 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -25,6 +25,8 @@ #include #include +#include + #include "internal.h" #include "sleep.h" @@ -91,13 +93,13 @@ static struct notifier_block tts_notifier = { static int acpi_sleep_prepare(u32 acpi_state) { #ifdef CONFIG_ACPI_SLEEP + unsigned long wakeup_pa = real_mode_header.wakeup_start; /* do we have a wakeup address for S2 and S3? */ if (acpi_state == ACPI_STATE_S3) { - if (!acpi_wakeup_address) { + if (!wakeup_pa) return -EFAULT; - } acpi_set_firmware_waking_vector( - (acpi_physical_address)acpi_wakeup_address); + (acpi_physical_address)wakeup_pa); } ACPI_FLUSH_CPU_CACHE();