* [lttng-dev] Syntax error running lttng
@ 2021-06-01 0:48 Merlin via lttng-dev
2021-06-01 18:56 ` Jonathan Rajotte-Julien via lttng-dev
2021-06-02 16:31 ` Jonathan Rajotte-Julien via lttng-dev
0 siblings, 2 replies; 4+ messages in thread
From: Merlin via lttng-dev @ 2021-06-01 0:48 UTC (permalink / raw)
To: lttng-dev
[-- Attachment #1.1: Type: text/plain, Size: 1759 bytes --]
Hi,
I have compiled LTTNG for ARM but when I try to run the executable, I get
this error:
lttng: line 1: syntax error: unexpected "("
E.G. lttng create my-kernel-session
--output=/mnt/sd1/nfs/temp/Innotech/lttng/my-kernel-trace
lttng list --kernel
lttng-sessiond
all produce the same error.
There were no compiler errors. I am at a loss to understand what it is
complaining about from the message.
Modules seem to load fine.
~ # lsmod
Module Size Used by Tainted: G
lttng_ring_buffer_client_discard 20480 0
lttng_ring_buffer_client_mmap_discard 20480 0
lttng_ring_buffer_metadata_mmap_client 16384 0
lttng_ring_buffer_metadata_client 16384 0
lttng_ring_buffer_event_notifier_client 16384 0
lttng_ring_buffer_client_overwrite 20480 0
lttng_tracer 1167360 6
lttng_ring_buffer_client_discard,lttng_ring_buffer_client_mmap_discard,lttng
_ring_buffer_metadata_mmap_client,lttng_ring_buffer_metadata_client,lttng_ri
ng_buffer_event_notifier_client,lttng_ring_buffer_client_overwrite
lttng_kprobes 16384 1 lttng_tracer
lttng_lib_ring_buffer 57344 7
lttng_ring_buffer_client_discard,lttng_ring_buffer_client_mmap_discard,lttng
_ring_buffer_metadata_mmap_client,lttng_ring_buffer_metadata_client,lttng_ri
ng_buffer_event_notifier_client,lttng_ring_buffer_client_overwrite,lttng_tra
cer
lttng_kretprobes 16384 1 lttng_tracer
lttng_statedump 20480 1 lttng_tracer
lttng_wrapper 16384 2 lttng_tracer,lttng_statedump
lttng_clock 16384 4
lttng_ring_buffer_client_discard,lttng_ring_buffer_client_mmap_discard,lttng
_ring_buffer_client_overwrite,lttng_tracer
Any suggestions appreciated.
Thank you.
Merlin
[-- Attachment #1.2: Type: text/html, Size: 5487 bytes --]
[-- Attachment #2: Type: text/plain, Size: 156 bytes --]
_______________________________________________
lttng-dev mailing list
lttng-dev@lists.lttng.org
https://lists.lttng.org/cgi-bin/mailman/listinfo/lttng-dev
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [lttng-dev] Syntax error running lttng
2021-06-01 0:48 [lttng-dev] Syntax error running lttng Merlin via lttng-dev
@ 2021-06-01 18:56 ` Jonathan Rajotte-Julien via lttng-dev
2021-06-02 5:40 ` Paul Coward via lttng-dev
2021-06-02 16:31 ` Jonathan Rajotte-Julien via lttng-dev
1 sibling, 1 reply; 4+ messages in thread
From: Jonathan Rajotte-Julien via lttng-dev @ 2021-06-01 18:56 UTC (permalink / raw)
To: public; +Cc: lttng-dev
Hi,
On Tue, Jun 01, 2021 at 10:48:13AM +1000, Merlin via lttng-dev wrote:
> Hi,
>
>
>
> I have compiled LTTNG for ARM but when I try to run the executable, I get
> this error:
Do you have any of the logs for the lttng-tools project?
That would be `config.log` and the output from `make` and `make install`
>
>
>
> lttng: line 1: syntax error: unexpected "("
Hmmm that does not look like an error from a elf executable.
Do you have any bash or shell alias for the lttng command?
Please provide the output of the following commands:
$ file $(which lttng)
$ head -n 10 $(which lttng)
> lttng-sessiond
If this happens also on the `lttng-sessiond` via command line but works using a
service, it would point to weird shell setup.
>
> all produce the same error.
>
>
>
> There were no compiler errors. I am at a loss to understand what it is
> complaining about from the message.
Me too.
>
>
>
> Modules seem to load fine.
Modules are loaded by the lttng-sessiond executable. Here only the CLI
executable seems to be having some problem.
--
Jonathan Rajotte-Julien
EfficiOS
_______________________________________________
lttng-dev mailing list
lttng-dev@lists.lttng.org
https://lists.lttng.org/cgi-bin/mailman/listinfo/lttng-dev
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [lttng-dev] Syntax error running lttng
2021-06-01 18:56 ` Jonathan Rajotte-Julien via lttng-dev
@ 2021-06-02 5:40 ` Paul Coward via lttng-dev
0 siblings, 0 replies; 4+ messages in thread
From: Paul Coward via lttng-dev @ 2021-06-02 5:40 UTC (permalink / raw)
To: 'Jonathan Rajotte-Julien', public; +Cc: lttng-dev
Hi,
Thank you for the response.
I have it installed on a small ARM computer that does not feature many
tools, specifically file & which are missing.
I don't have any shell aliases and the output of find is:
~ # find / -name "lttng" 2>/dev/null
/mnt/sd1/modulesLTTNG/lttng
/mnt/sd1/modulesLTTNG/lttng/usr/local/bin/lttng
/mnt/sd1/modulesLTTNG/lttng/usr/local/lib/lttng
~ #
Limiting it to finding files is only the one:
~ # find / -name "lttng" -type f 2>/dev/null
/mnt/sd1/modulesLTTNG/lttng/usr/local/bin/lttng
~ #
head -n 10 /mnt/sd1/modulesLTTNG/lttng/usr/local/bin/lttng
outputs binary, examining it on the build computer shows it is an ELF
executable built for ARM
I didn't set up the shell so that could be questionable, but I'm not sure
exactly how.
I couldn't find that error message in the lttng source but to me it looked a
little like errors I have seen from libXML (possibly reaching for straws).
The error message looks like it is trying to read some sort of configuration
file and failing.
This is a link to the config.log
https://drive.google.com/file/d/1_3QQEbfMcnS2_jX-MzJFO1JdGAArRRwW/view?usp=s
haring
I don't have the make output available at the moment but I can regenerate it
tomorrow if it will help.
-----Original Message-----
From: Jonathan Rajotte-Julien <jonathan.rajotte-julien@efficios.com>
Sent: Wednesday, 2 June 2021 04:56
To: public@triplanets.com
Cc: lttng-dev@lists.lttng.org
Subject: Re: [lttng-dev] Syntax error running lttng
Hi,
On Tue, Jun 01, 2021 at 10:48:13AM +1000, Merlin via lttng-dev wrote:
> Hi,
>
>
>
> I have compiled LTTNG for ARM but when I try to run the executable, I
> get this error:
Do you have any of the logs for the lttng-tools project?
That would be `config.log` and the output from `make` and `make install`
>
>
>
> lttng: line 1: syntax error: unexpected "("
Hmmm that does not look like an error from a elf executable.
Do you have any bash or shell alias for the lttng command?
Please provide the output of the following commands:
$ file $(which lttng)
$ head -n 10 $(which lttng)
> lttng-sessiond
If this happens also on the `lttng-sessiond` via command line but works
using a service, it would point to weird shell setup.
>
> all produce the same error.
>
>
>
> There were no compiler errors. I am at a loss to understand what it
> is complaining about from the message.
Me too.
>
>
>
> Modules seem to load fine.
Modules are loaded by the lttng-sessiond executable. Here only the CLI
executable seems to be having some problem.
--
Jonathan Rajotte-Julien
EfficiOS
_______________________________________________
lttng-dev mailing list
lttng-dev@lists.lttng.org
https://lists.lttng.org/cgi-bin/mailman/listinfo/lttng-dev
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [lttng-dev] Syntax error running lttng
2021-06-01 0:48 [lttng-dev] Syntax error running lttng Merlin via lttng-dev
2021-06-01 18:56 ` Jonathan Rajotte-Julien via lttng-dev
@ 2021-06-02 16:31 ` Jonathan Rajotte-Julien via lttng-dev
1 sibling, 0 replies; 4+ messages in thread
From: Jonathan Rajotte-Julien via lttng-dev @ 2021-06-02 16:31 UTC (permalink / raw)
To: paul; +Cc: lttng-dev
Hi,
Side note: not sure what is wrong with my email setup or the mailing list but I
cannot see the reply you sent in my email folder, but it is available here:
https://lists.lttng.org/pipermail/lttng-dev/2021-June/030021.html
In any case, this look strangely like the problem seen in [1][2]. Considering
your cross compilation setup I would take a deeper look at the generated
executable both locally and when on the device.
The `file` command is a must here I think.
[1] https://unix.stackexchange.com/questions/336436/syntax-error-unexpected-when-execute-a-compiled-c-program
[2] https://unix.stackexchange.com/questions/499641/syntax-error-unexpected-when-execute-a-cross-compiled-pjsip-binary-in-arm
Not sure if this is exactly your problem. `strace` might give a bit more info
on what is going on and at least see if the problem is lttng or anything else.
Cheers
On Tue, Jun 01, 2021 at 10:48:13AM +1000, Merlin via lttng-dev wrote:
> Hi,
>
>
>
> I have compiled LTTNG for ARM but when I try to run the executable, I get
> this error:
>
>
>
> lttng: line 1: syntax error: unexpected "("
>
>
>
> E.G. lttng create my-kernel-session
> --output=/mnt/sd1/nfs/temp/Innotech/lttng/my-kernel-trace
>
> lttng list --kernel
>
> lttng-sessiond
>
> all produce the same error.
>
>
>
> There were no compiler errors. I am at a loss to understand what it is
> complaining about from the message.
>
>
>
> Modules seem to load fine.
>
>
>
> ~ # lsmod
>
> Module Size Used by Tainted: G
>
> lttng_ring_buffer_client_discard 20480 0
>
> lttng_ring_buffer_client_mmap_discard 20480 0
>
> lttng_ring_buffer_metadata_mmap_client 16384 0
>
> lttng_ring_buffer_metadata_client 16384 0
>
> lttng_ring_buffer_event_notifier_client 16384 0
>
> lttng_ring_buffer_client_overwrite 20480 0
>
> lttng_tracer 1167360 6
> lttng_ring_buffer_client_discard,lttng_ring_buffer_client_mmap_discard,lttng
> _ring_buffer_metadata_mmap_client,lttng_ring_buffer_metadata_client,lttng_ri
> ng_buffer_event_notifier_client,lttng_ring_buffer_client_overwrite
>
> lttng_kprobes 16384 1 lttng_tracer
>
> lttng_lib_ring_buffer 57344 7
> lttng_ring_buffer_client_discard,lttng_ring_buffer_client_mmap_discard,lttng
> _ring_buffer_metadata_mmap_client,lttng_ring_buffer_metadata_client,lttng_ri
> ng_buffer_event_notifier_client,lttng_ring_buffer_client_overwrite,lttng_tra
> cer
>
> lttng_kretprobes 16384 1 lttng_tracer
>
> lttng_statedump 20480 1 lttng_tracer
>
> lttng_wrapper 16384 2 lttng_tracer,lttng_statedump
>
> lttng_clock 16384 4
> lttng_ring_buffer_client_discard,lttng_ring_buffer_client_mmap_discard,lttng
> _ring_buffer_client_overwrite,lttng_tracer
>
>
>
> Any suggestions appreciated.
>
>
>
> Thank you.
>
>
>
> Merlin
>
> _______________________________________________
> lttng-dev mailing list
> lttng-dev@lists.lttng.org
> https://lists.lttng.org/cgi-bin/mailman/listinfo/lttng-dev
--
Jonathan Rajotte-Julien
EfficiOS
_______________________________________________
lttng-dev mailing list
lttng-dev@lists.lttng.org
https://lists.lttng.org/cgi-bin/mailman/listinfo/lttng-dev
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2021-06-02 16:32 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-06-01 0:48 [lttng-dev] Syntax error running lttng Merlin via lttng-dev
2021-06-01 18:56 ` Jonathan Rajotte-Julien via lttng-dev
2021-06-02 5:40 ` Paul Coward via lttng-dev
2021-06-02 16:31 ` Jonathan Rajotte-Julien via lttng-dev
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).