mhi.lists.linux.dev archive mirror
 help / color / mirror / Atom feed
From: Manivannan Sadhasivam <mani@kernel.org>
To: Slark Xiao <slark_xiao@163.com>
Cc: gregkh@linuxfoundation.org, loic.poulain@linaro.org,
	dnlplm@gmail.com, yonglin.tan@outlook.com,
	fabio.porcedda@gmail.com, mhi@lists.linux.dev,
	linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] bus: mhi: host: pci_generic: Add macro for some vids
Date: Thu, 3 Nov 2022 18:20:09 +0530	[thread overview]
Message-ID: <20221103125009.GH8434@thinkpad> (raw)
In-Reply-To: <20221102024437.15248-1-slark_xiao@163.com>

On Wed, Nov 02, 2022 at 10:44:37AM +0800, Slark Xiao wrote:
> To make code neat and for convenience purpose, using macro for
> some vids.

s/using/use
s/vids/VIDs

> Refer to previous patch in pci_ids.h side, they are
> not allowed to add new entries of single driver needed. So we
> add it in our local file.
>

Reference to the previous patch has no relationship with this commit once
merged. How about,

"These macros are supposed to be added to pci_ids.h. But until the macros are
used in multiple places, it is not recommended. So adding it locally for now."
 
> Signed-off-by: Slark Xiao <slark_xiao@163.com>
> ---
>  drivers/bus/mhi/host/pci_generic.c | 18 +++++++++++-------
>  1 file changed, 11 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/bus/mhi/host/pci_generic.c b/drivers/bus/mhi/host/pci_generic.c
> index c4259cb2d289..5abc778a5290 100644
> --- a/drivers/bus/mhi/host/pci_generic.c
> +++ b/drivers/bus/mhi/host/pci_generic.c
> @@ -24,6 +24,10 @@
>  
>  #define HEALTH_CHECK_PERIOD (HZ * 2)
>  

Add a comment,

/* PCI VID definitions */

> +#define PCI_VENDOR_ID_THALES	0x1269
> +

No need of newline

> +#define PCI_VENDOR_ID_QUECTEL	0x1eac
> +

Just use a space after PCI_VENDOR_ID_QUECTEL like above.

Thanks,
Mani

>  /**
>   * struct mhi_pci_dev_info - MHI PCI device specific information
>   * @config: MHI controller configuration
> @@ -557,11 +561,11 @@ static const struct pci_device_id mhi_pci_id_table[] = {
>  		.driver_data = (kernel_ulong_t) &mhi_telit_fn990_info },
>  	{ PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0308),
>  		.driver_data = (kernel_ulong_t) &mhi_qcom_sdx65_info },
> -	{ PCI_DEVICE(0x1eac, 0x1001), /* EM120R-GL (sdx24) */
> +	{ PCI_DEVICE(PCI_VENDOR_ID_QUECTEL, 0x1001), /* EM120R-GL (sdx24) */
>  		.driver_data = (kernel_ulong_t) &mhi_quectel_em1xx_info },
> -	{ PCI_DEVICE(0x1eac, 0x1002), /* EM160R-GL (sdx24) */
> +	{ PCI_DEVICE(PCI_VENDOR_ID_QUECTEL, 0x1002), /* EM160R-GL (sdx24) */
>  		.driver_data = (kernel_ulong_t) &mhi_quectel_em1xx_info },
> -	{ PCI_DEVICE(0x1eac, 0x2001), /* EM120R-GL for FCCL (sdx24) */
> +	{ PCI_DEVICE(PCI_VENDOR_ID_QUECTEL, 0x2001), /* EM120R-GL for FCCL (sdx24) */
>  		.driver_data = (kernel_ulong_t) &mhi_quectel_em1xx_info },
>  	/* T99W175 (sdx55), Both for eSIM and Non-eSIM */
>  	{ PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xe0ab),
> @@ -585,16 +589,16 @@ static const struct pci_device_id mhi_pci_id_table[] = {
>  	{ PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xe0d9),
>  		.driver_data = (kernel_ulong_t) &mhi_foxconn_sdx65_info },
>  	/* MV31-W (Cinterion) */
> -	{ PCI_DEVICE(0x1269, 0x00b3),
> +	{ PCI_DEVICE(PCI_VENDOR_ID_THALES, 0x00b3),
>  		.driver_data = (kernel_ulong_t) &mhi_mv31_info },
>  	/* MV31-W (Cinterion), based on new baseline */
> -	{ PCI_DEVICE(0x1269, 0x00b4),
> +	{ PCI_DEVICE(PCI_VENDOR_ID_THALES, 0x00b4),
>  		.driver_data = (kernel_ulong_t) &mhi_mv31_info },
>  	/* MV32-WA (Cinterion) */
> -	{ PCI_DEVICE(0x1269, 0x00ba),
> +	{ PCI_DEVICE(PCI_VENDOR_ID_THALES, 0x00ba),
>  		.driver_data = (kernel_ulong_t) &mhi_mv32_info },
>  	/* MV32-WB (Cinterion) */
> -	{ PCI_DEVICE(0x1269, 0x00bb),
> +	{ PCI_DEVICE(PCI_VENDOR_ID_THALES, 0x00bb),
>  		.driver_data = (kernel_ulong_t) &mhi_mv32_info },
>  	{  }
>  };
> -- 
> 2.17.1
> 

-- 
மணிவண்ணன் சதாசிவம்

  reply	other threads:[~2022-11-03 12:50 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-11-02  2:44 [PATCH] bus: mhi: host: pci_generic: Add macro for some vids Slark Xiao
2022-11-03 12:50 ` Manivannan Sadhasivam [this message]
2022-11-07  2:21   ` Slark Xiao
2022-11-07  7:40     ` Manivannan Sadhasivam

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221103125009.GH8434@thinkpad \
    --to=mani@kernel.org \
    --cc=dnlplm@gmail.com \
    --cc=fabio.porcedda@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=loic.poulain@linaro.org \
    --cc=mhi@lists.linux.dev \
    --cc=slark_xiao@163.com \
    --cc=yonglin.tan@outlook.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).