Re: [PATCH] bus: mhi: host: pci_generic: Add support for IP_SW0 channels

[Loic Poulain <loic.poulain@linaro.org>]

On Fri, 19 May 2023 at 15:58, Manivannan Sadhasivam
<manivannan.sadhasivam@linaro.org> wrote:
>
> IP_SW0 channels are used to transfer data over the networking interface
> between MHI endpoint and the host. Define the channels in the MHI v1
> channel config along with dedicated event rings.
>
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

Assuming we can extend the number of event rings (and dedicated irqs)
without hitting any hardware limitation on the device side?

Reviewed-by: Loic Poulain <loic.poulain@linaro.org>



> ---
>  drivers/bus/mhi/host/pci_generic.c | 26 ++++++++++++++++++++++----
>  1 file changed, 22 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/bus/mhi/host/pci_generic.c b/drivers/bus/mhi/host/pci_generic.c
> index db0a0b062d8e..70e37c490150 100644
> --- a/drivers/bus/mhi/host/pci_generic.c
> +++ b/drivers/bus/mhi/host/pci_generic.c
> @@ -212,6 +212,19 @@ struct mhi_pci_dev_info {
>                 .offload_channel = false,       \
>         }
>
> +#define MHI_EVENT_CONFIG_SW_DATA(ev_ring, el_count) \
> +       {                                       \
> +               .num_elements = el_count,       \
> +               .irq_moderation_ms = 0,         \
> +               .irq = (ev_ring) + 1,           \
> +               .priority = 1,                  \
> +               .mode = MHI_DB_BRST_DISABLE,    \
> +               .data_type = MHI_ER_DATA,       \
> +               .hardware_event = false,        \
> +               .client_managed = false,        \
> +               .offload_channel = false,       \
> +       }
> +
>  #define MHI_EVENT_CONFIG_HW_DATA(ev_ring, el_count, ch_num) \
>         {                                       \
>                 .num_elements = el_count,       \
> @@ -237,8 +250,10 @@ static const struct mhi_channel_config modem_qcom_v1_mhi_channels[] = {
>         MHI_CHANNEL_CONFIG_DL_AUTOQUEUE(21, "IPCR", 8, 0),
>         MHI_CHANNEL_CONFIG_UL_FP(34, "FIREHOSE", 32, 0),
>         MHI_CHANNEL_CONFIG_DL_FP(35, "FIREHOSE", 32, 0),
> -       MHI_CHANNEL_CONFIG_HW_UL(100, "IP_HW0", 128, 2),
> -       MHI_CHANNEL_CONFIG_HW_DL(101, "IP_HW0", 128, 3),
> +       MHI_CHANNEL_CONFIG_UL(46, "IP_SW0", 64, 2),
> +       MHI_CHANNEL_CONFIG_DL(47, "IP_SW0", 64, 3),
> +       MHI_CHANNEL_CONFIG_HW_UL(100, "IP_HW0", 128, 4),
> +       MHI_CHANNEL_CONFIG_HW_DL(101, "IP_HW0", 128, 5),
>  };
>
>  static struct mhi_event_config modem_qcom_v1_mhi_events[] = {
> @@ -246,9 +261,12 @@ static struct mhi_event_config modem_qcom_v1_mhi_events[] = {
>         MHI_EVENT_CONFIG_CTRL(0, 64),
>         /* DIAG dedicated event ring */
>         MHI_EVENT_CONFIG_DATA(1, 128),
> +       /* Software channels dedicated event ring */
> +       MHI_EVENT_CONFIG_SW_DATA(2, 64),
> +       MHI_EVENT_CONFIG_SW_DATA(3, 64),
>         /* Hardware channels request dedicated hardware event rings */
> -       MHI_EVENT_CONFIG_HW_DATA(2, 1024, 100),
> -       MHI_EVENT_CONFIG_HW_DATA(3, 2048, 101)
> +       MHI_EVENT_CONFIG_HW_DATA(4, 1024, 100),
> +       MHI_EVENT_CONFIG_HW_DATA(5, 2048, 101)
>  };
>
>  static const struct mhi_controller_config modem_qcom_v1_mhiv_config = {
> --
> 2.25.1
>