From mboxrd@z Thu Jan 1 00:00:00 1970 From: akpm@linux-foundation.org Subject: + linux-next-git-rejects.patch added to -mm tree Date: Fri, 19 Mar 2010 12:47:49 -0400 Message-ID: <201003191948.o2JJmWqK008970@imap1.linux-foundation.org> Reply-To: linux-kernel@vger.kernel.org Return-path: Received: from smtp1.linux-foundation.org ([140.211.169.13]:56645 "EHLO smtp1.linux-foundation.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750911Ab0CSTsg (ORCPT ); Fri, 19 Mar 2010 15:48:36 -0400 Received: from imap1.linux-foundation.org (imap1.linux-foundation.org [140.211.169.55]) by smtp1.linux-foundation.org (8.14.2/8.13.5/Debian-3ubuntu1.1) with ESMTP id o2JJmXpc000875 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO) for ; Fri, 19 Mar 2010 12:48:34 -0700 Sender: mm-commits-owner@vger.kernel.org List-Id: mm-commits@vger.kernel.org To: mm-commits@vger.kernel.org Cc: akpm@linux-foundation.org The patch titled linux-next-git-rejects has been added to the -mm tree. Its filename is linux-next-git-rejects.patch Before you just go and hit "reply", please: a) Consider who else should be cc'ed b) Prefer to cc a suitable mailing list as well c) Ideally: find the original patch on the mailing list and do a reply-to-all to that, adding suitable additional cc's *** Remember to use Documentation/SubmitChecklist when testing your code *** See http://userweb.kernel.org/~akpm/stuff/added-to-mm.txt to find out what to do about this The current -mm tree may be found at http://userweb.kernel.org/~akpm/mmotm/ ------------------------------------------------------ Subject: linux-next-git-rejects From: Andrew Morton Signed-off-by: Andrew Morton --- Documentation/ioctl/ioctl-number.txt | 4 drivers/ata/ahci.c | 1656 ------------------------- 2 files changed, 1660 deletions(-) diff -puN Documentation/ioctl/ioctl-number.txt~linux-next-git-rejects Documentation/ioctl/ioctl-number.txt --- a/Documentation/ioctl/ioctl-number.txt~linux-next-git-rejects +++ a/Documentation/ioctl/ioctl-number.txt @@ -291,11 +291,7 @@ Code Seq#(hex) Include File Comments 0x92 00-0F drivers/usb/mon/mon_bin.c 0x93 60-7F linux/auto_fs.h 0x94 all fs/btrfs/ioctl.h -<<<<<<< HEAD -0x97 00-7F fs/ceph/ioctl.h Ceph file system -======= 0x97 00-7F fs/ceph/ioctl.h Ceph file system ->>>>>>> FETCH_HEAD 0x99 00-0F 537-Addinboard driver 0xA0 all linux/sdp/sdp.h Industrial Device Project diff -puN drivers/ata/ahci.c~linux-next-git-rejects drivers/ata/ahci.c --- a/drivers/ata/ahci.c~linux-next-git-rejects +++ a/drivers/ata/ahci.c @@ -343,1662 +343,6 @@ static const struct pci_device_id ahci_p { PCI_VDEVICE(SI, 0x1184), board_ahci }, /* SiS 966 */ { PCI_VDEVICE(SI, 0x1185), board_ahci }, /* SiS 968 */ { PCI_VDEVICE(SI, 0x0186), board_ahci }, /* SiS 968 */ -<<<<<<< HEAD - - /* Marvell */ - { PCI_VDEVICE(MARVELL, 0x6145), board_ahci_mv }, /* 6145 */ - { PCI_VDEVICE(MARVELL, 0x6121), board_ahci_mv }, /* 6121 */ - - /* Promise */ - { PCI_VDEVICE(PROMISE, 0x3f20), board_ahci }, /* PDC42819 */ - - /* Generic, PCI class code for AHCI */ - { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, - PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci }, - - { } /* terminate list */ -}; - - -static struct pci_driver ahci_pci_driver = { - .name = DRV_NAME, - .id_table = ahci_pci_tbl, - .probe = ahci_init_one, - .remove = ata_pci_remove_one, -#ifdef CONFIG_PM - .suspend = ahci_pci_device_suspend, - .resume = ahci_pci_device_resume, -#endif -}; - -static int ahci_em_messages = 1; -module_param(ahci_em_messages, int, 0444); -/* add other LED protocol types when they become supported */ -MODULE_PARM_DESC(ahci_em_messages, - "Set AHCI Enclosure Management Message type (0 = disabled, 1 = LED"); - -#if defined(CONFIG_PATA_MARVELL) || defined(CONFIG_PATA_MARVELL_MODULE) -static int marvell_enable; -#else -static int marvell_enable = 1; -#endif -module_param(marvell_enable, int, 0644); -MODULE_PARM_DESC(marvell_enable, "Marvell SATA via AHCI (1 = enabled)"); - - -static inline int ahci_nr_ports(u32 cap) -{ - return (cap & 0x1f) + 1; -} - -static inline void __iomem *__ahci_port_base(struct ata_host *host, - unsigned int port_no) -{ - void __iomem *mmio = host->iomap[AHCI_PCI_BAR]; - - return mmio + 0x100 + (port_no * 0x80); -} - -static inline void __iomem *ahci_port_base(struct ata_port *ap) -{ - return __ahci_port_base(ap->host, ap->port_no); -} - -static void ahci_enable_ahci(void __iomem *mmio) -{ - int i; - u32 tmp; - - /* turn on AHCI_EN */ - tmp = readl(mmio + HOST_CTL); - if (tmp & HOST_AHCI_EN) - return; - - /* Some controllers need AHCI_EN to be written multiple times. - * Try a few times before giving up. - */ - for (i = 0; i < 5; i++) { - tmp |= HOST_AHCI_EN; - writel(tmp, mmio + HOST_CTL); - tmp = readl(mmio + HOST_CTL); /* flush && sanity check */ - if (tmp & HOST_AHCI_EN) - return; - msleep(10); - } - - WARN_ON(1); -} - -static ssize_t ahci_show_host_caps(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct Scsi_Host *shost = class_to_shost(dev); - struct ata_port *ap = ata_shost_to_port(shost); - struct ahci_host_priv *hpriv = ap->host->private_data; - - return sprintf(buf, "%x\n", hpriv->cap); -} - -static ssize_t ahci_show_host_cap2(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct Scsi_Host *shost = class_to_shost(dev); - struct ata_port *ap = ata_shost_to_port(shost); - struct ahci_host_priv *hpriv = ap->host->private_data; - - return sprintf(buf, "%x\n", hpriv->cap2); -} - -static ssize_t ahci_show_host_version(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct Scsi_Host *shost = class_to_shost(dev); - struct ata_port *ap = ata_shost_to_port(shost); - void __iomem *mmio = ap->host->iomap[AHCI_PCI_BAR]; - - return sprintf(buf, "%x\n", readl(mmio + HOST_VERSION)); -} - -static ssize_t ahci_show_port_cmd(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct Scsi_Host *shost = class_to_shost(dev); - struct ata_port *ap = ata_shost_to_port(shost); - void __iomem *port_mmio = ahci_port_base(ap); - - return sprintf(buf, "%x\n", readl(port_mmio + PORT_CMD)); -} - -/** - * ahci_save_initial_config - Save and fixup initial config values - * @pdev: target PCI device - * @hpriv: host private area to store config values - * - * Some registers containing configuration info might be setup by - * BIOS and might be cleared on reset. This function saves the - * initial values of those registers into @hpriv such that they - * can be restored after controller reset. - * - * If inconsistent, config values are fixed up by this function. - * - * LOCKING: - * None. - */ -static void ahci_save_initial_config(struct pci_dev *pdev, - struct ahci_host_priv *hpriv) -{ - void __iomem *mmio = pcim_iomap_table(pdev)[AHCI_PCI_BAR]; - u32 cap, cap2, vers, port_map; - int i; - int mv; - - /* make sure AHCI mode is enabled before accessing CAP */ - ahci_enable_ahci(mmio); - - /* Values prefixed with saved_ are written back to host after - * reset. Values without are used for driver operation. - */ - hpriv->saved_cap = cap = readl(mmio + HOST_CAP); - hpriv->saved_port_map = port_map = readl(mmio + HOST_PORTS_IMPL); - - /* CAP2 register is only defined for AHCI 1.2 and later */ - vers = readl(mmio + HOST_VERSION); - if ((vers >> 16) > 1 || - ((vers >> 16) == 1 && (vers & 0xFFFF) >= 0x200)) - hpriv->saved_cap2 = cap2 = readl(mmio + HOST_CAP2); - else - hpriv->saved_cap2 = cap2 = 0; - - /* some chips have errata preventing 64bit use */ - if ((cap & HOST_CAP_64) && (hpriv->flags & AHCI_HFLAG_32BIT_ONLY)) { - dev_printk(KERN_INFO, &pdev->dev, - "controller can't do 64bit DMA, forcing 32bit\n"); - cap &= ~HOST_CAP_64; - } - - if ((cap & HOST_CAP_NCQ) && (hpriv->flags & AHCI_HFLAG_NO_NCQ)) { - dev_printk(KERN_INFO, &pdev->dev, - "controller can't do NCQ, turning off CAP_NCQ\n"); - cap &= ~HOST_CAP_NCQ; - } - - if (!(cap & HOST_CAP_NCQ) && (hpriv->flags & AHCI_HFLAG_YES_NCQ)) { - dev_printk(KERN_INFO, &pdev->dev, - "controller can do NCQ, turning on CAP_NCQ\n"); - cap |= HOST_CAP_NCQ; - } - - if ((cap & HOST_CAP_PMP) && (hpriv->flags & AHCI_HFLAG_NO_PMP)) { - dev_printk(KERN_INFO, &pdev->dev, - "controller can't do PMP, turning off CAP_PMP\n"); - cap &= ~HOST_CAP_PMP; - } - - if ((cap & HOST_CAP_SNTF) && (hpriv->flags & AHCI_HFLAG_NO_SNTF)) { - dev_printk(KERN_INFO, &pdev->dev, - "controller can't do SNTF, turning off CAP_SNTF\n"); - cap &= ~HOST_CAP_SNTF; - } - - if (pdev->vendor == PCI_VENDOR_ID_JMICRON && pdev->device == 0x2361 && - port_map != 1) { - dev_printk(KERN_INFO, &pdev->dev, - "JMB361 has only one port, port_map 0x%x -> 0x%x\n", - port_map, 1); - port_map = 1; - } - - /* - * Temporary Marvell 6145 hack: PATA port presence - * is asserted through the standard AHCI port - * presence register, as bit 4 (counting from 0) - */ - if (hpriv->flags & AHCI_HFLAG_MV_PATA) { - if (pdev->device == 0x6121) - mv = 0x3; - else - mv = 0xf; - dev_printk(KERN_ERR, &pdev->dev, - "MV_AHCI HACK: port_map %x -> %x\n", - port_map, - port_map & mv); - dev_printk(KERN_ERR, &pdev->dev, - "Disabling your PATA port. Use the boot option 'ahci.marvell_enable=0' to avoid this.\n"); - - port_map &= mv; - } - - /* cross check port_map and cap.n_ports */ - if (port_map) { - int map_ports = 0; - - for (i = 0; i < AHCI_MAX_PORTS; i++) - if (port_map & (1 << i)) - map_ports++; - - /* If PI has more ports than n_ports, whine, clear - * port_map and let it be generated from n_ports. - */ - if (map_ports > ahci_nr_ports(cap)) { - dev_printk(KERN_WARNING, &pdev->dev, - "implemented port map (0x%x) contains more " - "ports than nr_ports (%u), using nr_ports\n", - port_map, ahci_nr_ports(cap)); - port_map = 0; - } - } - - /* fabricate port_map from cap.nr_ports */ - if (!port_map) { - port_map = (1 << ahci_nr_ports(cap)) - 1; - dev_printk(KERN_WARNING, &pdev->dev, - "forcing PORTS_IMPL to 0x%x\n", port_map); - - /* write the fixed up value to the PI register */ - hpriv->saved_port_map = port_map; - } - - /* record values to use during operation */ - hpriv->cap = cap; - hpriv->cap2 = cap2; - hpriv->port_map = port_map; -} - -/** - * ahci_restore_initial_config - Restore initial config - * @host: target ATA host - * - * Restore initial config stored by ahci_save_initial_config(). - * - * LOCKING: - * None. - */ -static void ahci_restore_initial_config(struct ata_host *host) -{ - struct ahci_host_priv *hpriv = host->private_data; - void __iomem *mmio = host->iomap[AHCI_PCI_BAR]; - - writel(hpriv->saved_cap, mmio + HOST_CAP); - if (hpriv->saved_cap2) - writel(hpriv->saved_cap2, mmio + HOST_CAP2); - writel(hpriv->saved_port_map, mmio + HOST_PORTS_IMPL); - (void) readl(mmio + HOST_PORTS_IMPL); /* flush */ -} - -static unsigned ahci_scr_offset(struct ata_port *ap, unsigned int sc_reg) -{ - static const int offset[] = { - [SCR_STATUS] = PORT_SCR_STAT, - [SCR_CONTROL] = PORT_SCR_CTL, - [SCR_ERROR] = PORT_SCR_ERR, - [SCR_ACTIVE] = PORT_SCR_ACT, - [SCR_NOTIFICATION] = PORT_SCR_NTF, - }; - struct ahci_host_priv *hpriv = ap->host->private_data; - - if (sc_reg < ARRAY_SIZE(offset) && - (sc_reg != SCR_NOTIFICATION || (hpriv->cap & HOST_CAP_SNTF))) - return offset[sc_reg]; - return 0; -} - -static int ahci_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val) -{ - void __iomem *port_mmio = ahci_port_base(link->ap); - int offset = ahci_scr_offset(link->ap, sc_reg); - - if (offset) { - *val = readl(port_mmio + offset); - return 0; - } - return -EINVAL; -} - -static int ahci_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val) -{ - void __iomem *port_mmio = ahci_port_base(link->ap); - int offset = ahci_scr_offset(link->ap, sc_reg); - - if (offset) { - writel(val, port_mmio + offset); - return 0; - } - return -EINVAL; -} - -static void ahci_start_engine(struct ata_port *ap) -{ - void __iomem *port_mmio = ahci_port_base(ap); - u32 tmp; - - /* start DMA */ - tmp = readl(port_mmio + PORT_CMD); - tmp |= PORT_CMD_START; - writel(tmp, port_mmio + PORT_CMD); - readl(port_mmio + PORT_CMD); /* flush */ -} - -static int ahci_stop_engine(struct ata_port *ap) -{ - void __iomem *port_mmio = ahci_port_base(ap); - u32 tmp; - - tmp = readl(port_mmio + PORT_CMD); - - /* check if the HBA is idle */ - if ((tmp & (PORT_CMD_START | PORT_CMD_LIST_ON)) == 0) - return 0; - - /* setting HBA to idle */ - tmp &= ~PORT_CMD_START; - writel(tmp, port_mmio + PORT_CMD); - - /* wait for engine to stop. This could be as long as 500 msec */ - tmp = ata_wait_register(port_mmio + PORT_CMD, - PORT_CMD_LIST_ON, PORT_CMD_LIST_ON, 1, 500); - if (tmp & PORT_CMD_LIST_ON) - return -EIO; - - return 0; -} - -static void ahci_start_fis_rx(struct ata_port *ap) -{ - void __iomem *port_mmio = ahci_port_base(ap); - struct ahci_host_priv *hpriv = ap->host->private_data; - struct ahci_port_priv *pp = ap->private_data; - u32 tmp; - - /* set FIS registers */ - if (hpriv->cap & HOST_CAP_64) - writel((pp->cmd_slot_dma >> 16) >> 16, - port_mmio + PORT_LST_ADDR_HI); - writel(pp->cmd_slot_dma & 0xffffffff, port_mmio + PORT_LST_ADDR); - - if (hpriv->cap & HOST_CAP_64) - writel((pp->rx_fis_dma >> 16) >> 16, - port_mmio + PORT_FIS_ADDR_HI); - writel(pp->rx_fis_dma & 0xffffffff, port_mmio + PORT_FIS_ADDR); - - /* enable FIS reception */ - tmp = readl(port_mmio + PORT_CMD); - tmp |= PORT_CMD_FIS_RX; - writel(tmp, port_mmio + PORT_CMD); - - /* flush */ - readl(port_mmio + PORT_CMD); -} - -static int ahci_stop_fis_rx(struct ata_port *ap) -{ - void __iomem *port_mmio = ahci_port_base(ap); - u32 tmp; - - /* disable FIS reception */ - tmp = readl(port_mmio + PORT_CMD); - tmp &= ~PORT_CMD_FIS_RX; - writel(tmp, port_mmio + PORT_CMD); - - /* wait for completion, spec says 500ms, give it 1000 */ - tmp = ata_wait_register(port_mmio + PORT_CMD, PORT_CMD_FIS_ON, - PORT_CMD_FIS_ON, 10, 1000); - if (tmp & PORT_CMD_FIS_ON) - return -EBUSY; - - return 0; -} - -static void ahci_power_up(struct ata_port *ap) -{ - struct ahci_host_priv *hpriv = ap->host->private_data; - void __iomem *port_mmio = ahci_port_base(ap); - u32 cmd; - - cmd = readl(port_mmio + PORT_CMD) & ~PORT_CMD_ICC_MASK; - - /* spin up device */ - if (hpriv->cap & HOST_CAP_SSS) { - cmd |= PORT_CMD_SPIN_UP; - writel(cmd, port_mmio + PORT_CMD); - } - - /* wake up link */ - writel(cmd | PORT_CMD_ICC_ACTIVE, port_mmio + PORT_CMD); -} - -static void ahci_disable_alpm(struct ata_port *ap) -{ - struct ahci_host_priv *hpriv = ap->host->private_data; - void __iomem *port_mmio = ahci_port_base(ap); - u32 cmd; - struct ahci_port_priv *pp = ap->private_data; - - /* IPM bits should be disabled by libata-core */ - /* get the existing command bits */ - cmd = readl(port_mmio + PORT_CMD); - - /* disable ALPM and ASP */ - cmd &= ~PORT_CMD_ASP; - cmd &= ~PORT_CMD_ALPE; - - /* force the interface back to active */ - cmd |= PORT_CMD_ICC_ACTIVE; - - /* write out new cmd value */ - writel(cmd, port_mmio + PORT_CMD); - cmd = readl(port_mmio + PORT_CMD); - - /* wait 10ms to be sure we've come out of any low power state */ - msleep(10); - - /* clear out any PhyRdy stuff from interrupt status */ - writel(PORT_IRQ_PHYRDY, port_mmio + PORT_IRQ_STAT); - - /* go ahead and clean out PhyRdy Change from Serror too */ - ahci_scr_write(&ap->link, SCR_ERROR, ((1 << 16) | (1 << 18))); - - /* - * Clear flag to indicate that we should ignore all PhyRdy - * state changes - */ - hpriv->flags &= ~AHCI_HFLAG_NO_HOTPLUG; - - /* - * Enable interrupts on Phy Ready. - */ - pp->intr_mask |= PORT_IRQ_PHYRDY; - writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK); - - /* - * don't change the link pm policy - we can be called - * just to turn of link pm temporarily - */ -} - -static int ahci_enable_alpm(struct ata_port *ap, - enum link_pm policy) -{ - struct ahci_host_priv *hpriv = ap->host->private_data; - void __iomem *port_mmio = ahci_port_base(ap); - u32 cmd; - struct ahci_port_priv *pp = ap->private_data; - u32 asp; - - /* Make sure the host is capable of link power management */ - if (!(hpriv->cap & HOST_CAP_ALPM)) - return -EINVAL; - - switch (policy) { - case MAX_PERFORMANCE: - case NOT_AVAILABLE: - /* - * if we came here with NOT_AVAILABLE, - * it just means this is the first time we - * have tried to enable - default to max performance, - * and let the user go to lower power modes on request. - */ - ahci_disable_alpm(ap); - return 0; - case MIN_POWER: - /* configure HBA to enter SLUMBER */ - asp = PORT_CMD_ASP; - break; - case MEDIUM_POWER: - /* configure HBA to enter PARTIAL */ - asp = 0; - break; - default: - return -EINVAL; - } - - /* - * Disable interrupts on Phy Ready. This keeps us from - * getting woken up due to spurious phy ready interrupts - * TBD - Hot plug should be done via polling now, is - * that even supported? - */ - pp->intr_mask &= ~PORT_IRQ_PHYRDY; - writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK); - - /* - * Set a flag to indicate that we should ignore all PhyRdy - * state changes since these can happen now whenever we - * change link state - */ - hpriv->flags |= AHCI_HFLAG_NO_HOTPLUG; - - /* get the existing command bits */ - cmd = readl(port_mmio + PORT_CMD); - - /* - * Set ASP based on Policy - */ - cmd |= asp; - - /* - * Setting this bit will instruct the HBA to aggressively - * enter a lower power link state when it's appropriate and - * based on the value set above for ASP - */ - cmd |= PORT_CMD_ALPE; - - /* write out new cmd value */ - writel(cmd, port_mmio + PORT_CMD); - cmd = readl(port_mmio + PORT_CMD); - - /* IPM bits should be set by libata-core */ - return 0; -} - -#ifdef CONFIG_PM -static void ahci_power_down(struct ata_port *ap) -{ - struct ahci_host_priv *hpriv = ap->host->private_data; - void __iomem *port_mmio = ahci_port_base(ap); - u32 cmd, scontrol; - - if (!(hpriv->cap & HOST_CAP_SSS)) - return; - - /* put device into listen mode, first set PxSCTL.DET to 0 */ - scontrol = readl(port_mmio + PORT_SCR_CTL); - scontrol &= ~0xf; - writel(scontrol, port_mmio + PORT_SCR_CTL); - - /* then set PxCMD.SUD to 0 */ - cmd = readl(port_mmio + PORT_CMD) & ~PORT_CMD_ICC_MASK; - cmd &= ~PORT_CMD_SPIN_UP; - writel(cmd, port_mmio + PORT_CMD); -} -#endif - -static void ahci_start_port(struct ata_port *ap) -{ - struct ahci_port_priv *pp = ap->private_data; - struct ata_link *link; - struct ahci_em_priv *emp; - ssize_t rc; - int i; - - /* enable FIS reception */ - ahci_start_fis_rx(ap); - - /* enable DMA */ - ahci_start_engine(ap); - - /* turn on LEDs */ - if (ap->flags & ATA_FLAG_EM) { - ata_for_each_link(link, ap, EDGE) { - emp = &pp->em_priv[link->pmp]; - - /* EM Transmit bit maybe busy during init */ - for (i = 0; i < EM_MAX_RETRY; i++) { - rc = ahci_transmit_led_message(ap, - emp->led_state, - 4); - if (rc == -EBUSY) - msleep(1); - else - break; - } - } - } - - if (ap->flags & ATA_FLAG_SW_ACTIVITY) - ata_for_each_link(link, ap, EDGE) - ahci_init_sw_activity(link); - -} - -static int ahci_deinit_port(struct ata_port *ap, const char **emsg) -{ - int rc; - - /* disable DMA */ - rc = ahci_stop_engine(ap); - if (rc) { - *emsg = "failed to stop engine"; - return rc; - } - - /* disable FIS reception */ - rc = ahci_stop_fis_rx(ap); - if (rc) { - *emsg = "failed stop FIS RX"; - return rc; - } - - return 0; -} - -static int ahci_reset_controller(struct ata_host *host) -{ - struct pci_dev *pdev = to_pci_dev(host->dev); - struct ahci_host_priv *hpriv = host->private_data; - void __iomem *mmio = host->iomap[AHCI_PCI_BAR]; - u32 tmp; - - /* we must be in AHCI mode, before using anything - * AHCI-specific, such as HOST_RESET. - */ - ahci_enable_ahci(mmio); - - /* global controller reset */ - if (!ahci_skip_host_reset) { - tmp = readl(mmio + HOST_CTL); - if ((tmp & HOST_RESET) == 0) { - writel(tmp | HOST_RESET, mmio + HOST_CTL); - readl(mmio + HOST_CTL); /* flush */ - } - - /* - * to perform host reset, OS should set HOST_RESET - * and poll until this bit is read to be "0". - * reset must complete within 1 second, or - * the hardware should be considered fried. - */ - tmp = ata_wait_register(mmio + HOST_CTL, HOST_RESET, - HOST_RESET, 10, 1000); - - if (tmp & HOST_RESET) { - dev_printk(KERN_ERR, host->dev, - "controller reset failed (0x%x)\n", tmp); - return -EIO; - } - - /* turn on AHCI mode */ - ahci_enable_ahci(mmio); - - /* Some registers might be cleared on reset. Restore - * initial values. - */ - ahci_restore_initial_config(host); - } else - dev_printk(KERN_INFO, host->dev, - "skipping global host reset\n"); - - if (pdev->vendor == PCI_VENDOR_ID_INTEL) { - u16 tmp16; - - /* configure PCS */ - pci_read_config_word(pdev, 0x92, &tmp16); - if ((tmp16 & hpriv->port_map) != hpriv->port_map) { - tmp16 |= hpriv->port_map; - pci_write_config_word(pdev, 0x92, tmp16); - } - } - - return 0; -} - -static void ahci_sw_activity(struct ata_link *link) -{ - struct ata_port *ap = link->ap; - struct ahci_port_priv *pp = ap->private_data; - struct ahci_em_priv *emp = &pp->em_priv[link->pmp]; - - if (!(link->flags & ATA_LFLAG_SW_ACTIVITY)) - return; - - emp->activity++; - if (!timer_pending(&emp->timer)) - mod_timer(&emp->timer, jiffies + msecs_to_jiffies(10)); -} - -static void ahci_sw_activity_blink(unsigned long arg) -{ - struct ata_link *link = (struct ata_link *)arg; - struct ata_port *ap = link->ap; - struct ahci_port_priv *pp = ap->private_data; - struct ahci_em_priv *emp = &pp->em_priv[link->pmp]; - unsigned long led_message = emp->led_state; - u32 activity_led_state; - unsigned long flags; - - led_message &= EM_MSG_LED_VALUE; - led_message |= ap->port_no | (link->pmp << 8); - - /* check to see if we've had activity. If so, - * toggle state of LED and reset timer. If not, - * turn LED to desired idle state. - */ - spin_lock_irqsave(ap->lock, flags); - if (emp->saved_activity != emp->activity) { - emp->saved_activity = emp->activity; - /* get the current LED state */ - activity_led_state = led_message & EM_MSG_LED_VALUE_ON; - - if (activity_led_state) - activity_led_state = 0; - else - activity_led_state = 1; - - /* clear old state */ - led_message &= ~EM_MSG_LED_VALUE_ACTIVITY; - - /* toggle state */ - led_message |= (activity_led_state << 16); - mod_timer(&emp->timer, jiffies + msecs_to_jiffies(100)); - } else { - /* switch to idle */ - led_message &= ~EM_MSG_LED_VALUE_ACTIVITY; - if (emp->blink_policy == BLINK_OFF) - led_message |= (1 << 16); - } - spin_unlock_irqrestore(ap->lock, flags); - ahci_transmit_led_message(ap, led_message, 4); -} - -static void ahci_init_sw_activity(struct ata_link *link) -{ - struct ata_port *ap = link->ap; - struct ahci_port_priv *pp = ap->private_data; - struct ahci_em_priv *emp = &pp->em_priv[link->pmp]; - - /* init activity stats, setup timer */ - emp->saved_activity = emp->activity = 0; - setup_timer(&emp->timer, ahci_sw_activity_blink, (unsigned long)link); - - /* check our blink policy and set flag for link if it's enabled */ - if (emp->blink_policy) - link->flags |= ATA_LFLAG_SW_ACTIVITY; -} - -static int ahci_reset_em(struct ata_host *host) -{ - void __iomem *mmio = host->iomap[AHCI_PCI_BAR]; - u32 em_ctl; - - em_ctl = readl(mmio + HOST_EM_CTL); - if ((em_ctl & EM_CTL_TM) || (em_ctl & EM_CTL_RST)) - return -EINVAL; - - writel(em_ctl | EM_CTL_RST, mmio + HOST_EM_CTL); - return 0; -} - -static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state, - ssize_t size) -{ - struct ahci_host_priv *hpriv = ap->host->private_data; - struct ahci_port_priv *pp = ap->private_data; - void __iomem *mmio = ap->host->iomap[AHCI_PCI_BAR]; - u32 em_ctl; - u32 message[] = {0, 0}; - unsigned long flags; - int pmp; - struct ahci_em_priv *emp; - - /* get the slot number from the message */ - pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8; - if (pmp < EM_MAX_SLOTS) - emp = &pp->em_priv[pmp]; - else - return -EINVAL; - - spin_lock_irqsave(ap->lock, flags); - - /* - * if we are still busy transmitting a previous message, - * do not allow - */ - em_ctl = readl(mmio + HOST_EM_CTL); - if (em_ctl & EM_CTL_TM) { - spin_unlock_irqrestore(ap->lock, flags); - return -EBUSY; - } - - /* - * create message header - this is all zero except for - * the message size, which is 4 bytes. - */ - message[0] |= (4 << 8); - - /* ignore 0:4 of byte zero, fill in port info yourself */ - message[1] = ((state & ~EM_MSG_LED_HBA_PORT) | ap->port_no); - - /* write message to EM_LOC */ - writel(message[0], mmio + hpriv->em_loc); - writel(message[1], mmio + hpriv->em_loc+4); - - /* save off new led state for port/slot */ - emp->led_state = state; - - /* - * tell hardware to transmit the message - */ - writel(em_ctl | EM_CTL_TM, mmio + HOST_EM_CTL); - - spin_unlock_irqrestore(ap->lock, flags); - return size; -} - -static ssize_t ahci_led_show(struct ata_port *ap, char *buf) -{ - struct ahci_port_priv *pp = ap->private_data; - struct ata_link *link; - struct ahci_em_priv *emp; - int rc = 0; - - ata_for_each_link(link, ap, EDGE) { - emp = &pp->em_priv[link->pmp]; - rc += sprintf(buf, "%lx\n", emp->led_state); - } - return rc; -} - -static ssize_t ahci_led_store(struct ata_port *ap, const char *buf, - size_t size) -{ - int state; - int pmp; - struct ahci_port_priv *pp = ap->private_data; - struct ahci_em_priv *emp; - - state = simple_strtoul(buf, NULL, 0); - - /* get the slot number from the message */ - pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8; - if (pmp < EM_MAX_SLOTS) - emp = &pp->em_priv[pmp]; - else - return -EINVAL; - - /* mask off the activity bits if we are in sw_activity - * mode, user should turn off sw_activity before setting - * activity led through em_message - */ - if (emp->blink_policy) - state &= ~EM_MSG_LED_VALUE_ACTIVITY; - - return ahci_transmit_led_message(ap, state, size); -} - -static ssize_t ahci_activity_store(struct ata_device *dev, enum sw_activity val) -{ - struct ata_link *link = dev->link; - struct ata_port *ap = link->ap; - struct ahci_port_priv *pp = ap->private_data; - struct ahci_em_priv *emp = &pp->em_priv[link->pmp]; - u32 port_led_state = emp->led_state; - - /* save the desired Activity LED behavior */ - if (val == OFF) { - /* clear LFLAG */ - link->flags &= ~(ATA_LFLAG_SW_ACTIVITY); - - /* set the LED to OFF */ - port_led_state &= EM_MSG_LED_VALUE_OFF; - port_led_state |= (ap->port_no | (link->pmp << 8)); - ahci_transmit_led_message(ap, port_led_state, 4); - } else { - link->flags |= ATA_LFLAG_SW_ACTIVITY; - if (val == BLINK_OFF) { - /* set LED to ON for idle */ - port_led_state &= EM_MSG_LED_VALUE_OFF; - port_led_state |= (ap->port_no | (link->pmp << 8)); - port_led_state |= EM_MSG_LED_VALUE_ON; /* check this */ - ahci_transmit_led_message(ap, port_led_state, 4); - } - } - emp->blink_policy = val; - return 0; -} - -static ssize_t ahci_activity_show(struct ata_device *dev, char *buf) -{ - struct ata_link *link = dev->link; - struct ata_port *ap = link->ap; - struct ahci_port_priv *pp = ap->private_data; - struct ahci_em_priv *emp = &pp->em_priv[link->pmp]; - - /* display the saved value of activity behavior for this - * disk. - */ - return sprintf(buf, "%d\n", emp->blink_policy); -} - -static void ahci_port_init(struct pci_dev *pdev, struct ata_port *ap, - int port_no, void __iomem *mmio, - void __iomem *port_mmio) -{ - const char *emsg = NULL; - int rc; - u32 tmp; - - /* make sure port is not active */ - rc = ahci_deinit_port(ap, &emsg); - if (rc) - dev_printk(KERN_WARNING, &pdev->dev, - "%s (%d)\n", emsg, rc); - - /* clear SError */ - tmp = readl(port_mmio + PORT_SCR_ERR); - VPRINTK("PORT_SCR_ERR 0x%x\n", tmp); - writel(tmp, port_mmio + PORT_SCR_ERR); - - /* clear port IRQ */ - tmp = readl(port_mmio + PORT_IRQ_STAT); - VPRINTK("PORT_IRQ_STAT 0x%x\n", tmp); - if (tmp) - writel(tmp, port_mmio + PORT_IRQ_STAT); - - writel(1 << port_no, mmio + HOST_IRQ_STAT); -} - -static void ahci_init_controller(struct ata_host *host) -{ - struct ahci_host_priv *hpriv = host->private_data; - struct pci_dev *pdev = to_pci_dev(host->dev); - void __iomem *mmio = host->iomap[AHCI_PCI_BAR]; - int i; - void __iomem *port_mmio; - u32 tmp; - int mv; - - if (hpriv->flags & AHCI_HFLAG_MV_PATA) { - if (pdev->device == 0x6121) - mv = 2; - else - mv = 4; - port_mmio = __ahci_port_base(host, mv); - - writel(0, port_mmio + PORT_IRQ_MASK); - - /* clear port IRQ */ - tmp = readl(port_mmio + PORT_IRQ_STAT); - VPRINTK("PORT_IRQ_STAT 0x%x\n", tmp); - if (tmp) - writel(tmp, port_mmio + PORT_IRQ_STAT); - } - - for (i = 0; i < host->n_ports; i++) { - struct ata_port *ap = host->ports[i]; - - port_mmio = ahci_port_base(ap); - if (ata_port_is_dummy(ap)) - continue; - - ahci_port_init(pdev, ap, i, mmio, port_mmio); - } - - tmp = readl(mmio + HOST_CTL); - VPRINTK("HOST_CTL 0x%x\n", tmp); - writel(tmp | HOST_IRQ_EN, mmio + HOST_CTL); - tmp = readl(mmio + HOST_CTL); - VPRINTK("HOST_CTL 0x%x\n", tmp); -} - -static void ahci_dev_config(struct ata_device *dev) -{ - struct ahci_host_priv *hpriv = dev->link->ap->host->private_data; - - if (hpriv->flags & AHCI_HFLAG_SECT255) { - dev->max_sectors = 255; - ata_dev_printk(dev, KERN_INFO, - "SB600 AHCI: limiting to 255 sectors per cmd\n"); - } -} - -static unsigned int ahci_dev_classify(struct ata_port *ap) -{ - void __iomem *port_mmio = ahci_port_base(ap); - struct ata_taskfile tf; - u32 tmp; - - tmp = readl(port_mmio + PORT_SIG); - tf.lbah = (tmp >> 24) & 0xff; - tf.lbam = (tmp >> 16) & 0xff; - tf.lbal = (tmp >> 8) & 0xff; - tf.nsect = (tmp) & 0xff; - - return ata_dev_classify(&tf); -} - -static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag, - u32 opts) -{ - dma_addr_t cmd_tbl_dma; - - cmd_tbl_dma = pp->cmd_tbl_dma + tag * AHCI_CMD_TBL_SZ; - - pp->cmd_slot[tag].opts = cpu_to_le32(opts); - pp->cmd_slot[tag].status = 0; - pp->cmd_slot[tag].tbl_addr = cpu_to_le32(cmd_tbl_dma & 0xffffffff); - pp->cmd_slot[tag].tbl_addr_hi = cpu_to_le32((cmd_tbl_dma >> 16) >> 16); -} - -static int ahci_kick_engine(struct ata_port *ap) -{ - void __iomem *port_mmio = ahci_port_base(ap); - struct ahci_host_priv *hpriv = ap->host->private_data; - u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF; - u32 tmp; - int busy, rc; - - /* stop engine */ - rc = ahci_stop_engine(ap); - if (rc) - goto out_restart; - - /* need to do CLO? - * always do CLO if PMP is attached (AHCI-1.3 9.2) - */ - busy = status & (ATA_BUSY | ATA_DRQ); - if (!busy && !sata_pmp_attached(ap)) { - rc = 0; - goto out_restart; - } - - if (!(hpriv->cap & HOST_CAP_CLO)) { - rc = -EOPNOTSUPP; - goto out_restart; - } - - /* perform CLO */ - tmp = readl(port_mmio + PORT_CMD); - tmp |= PORT_CMD_CLO; - writel(tmp, port_mmio + PORT_CMD); - - rc = 0; - tmp = ata_wait_register(port_mmio + PORT_CMD, - PORT_CMD_CLO, PORT_CMD_CLO, 1, 500); - if (tmp & PORT_CMD_CLO) - rc = -EIO; - - /* restart engine */ - out_restart: - ahci_start_engine(ap); - return rc; -} - -static int ahci_exec_polled_cmd(struct ata_port *ap, int pmp, - struct ata_taskfile *tf, int is_cmd, u16 flags, - unsigned long timeout_msec) -{ - const u32 cmd_fis_len = 5; /* five dwords */ - struct ahci_port_priv *pp = ap->private_data; - void __iomem *port_mmio = ahci_port_base(ap); - u8 *fis = pp->cmd_tbl; - u32 tmp; - - /* prep the command */ - ata_tf_to_fis(tf, pmp, is_cmd, fis); - ahci_fill_cmd_slot(pp, 0, cmd_fis_len | flags | (pmp << 12)); - - /* issue & wait */ - writel(1, port_mmio + PORT_CMD_ISSUE); - - if (timeout_msec) { - tmp = ata_wait_register(port_mmio + PORT_CMD_ISSUE, 0x1, 0x1, - 1, timeout_msec); - if (tmp & 0x1) { - ahci_kick_engine(ap); - return -EBUSY; - } - } else - readl(port_mmio + PORT_CMD_ISSUE); /* flush */ - - return 0; -} - -static int ahci_do_softreset(struct ata_link *link, unsigned int *class, - int pmp, unsigned long deadline, - int (*check_ready)(struct ata_link *link)) -{ - struct ata_port *ap = link->ap; - struct ahci_host_priv *hpriv = ap->host->private_data; - const char *reason = NULL; - unsigned long now, msecs; - struct ata_taskfile tf; - int rc; - - DPRINTK("ENTER\n"); - - /* prepare for SRST (AHCI-1.1 10.4.1) */ - rc = ahci_kick_engine(ap); - if (rc && rc != -EOPNOTSUPP) - ata_link_printk(link, KERN_WARNING, - "failed to reset engine (errno=%d)\n", rc); - - ata_tf_init(link->device, &tf); - - /* issue the first D2H Register FIS */ - msecs = 0; - now = jiffies; - if (time_after(now, deadline)) - msecs = jiffies_to_msecs(deadline - now); - - tf.ctl |= ATA_SRST; - if (ahci_exec_polled_cmd(ap, pmp, &tf, 0, - AHCI_CMD_RESET | AHCI_CMD_CLR_BUSY, msecs)) { - rc = -EIO; - reason = "1st FIS failed"; - goto fail; - } - - /* spec says at least 5us, but be generous and sleep for 1ms */ - msleep(1); - - /* issue the second D2H Register FIS */ - tf.ctl &= ~ATA_SRST; - ahci_exec_polled_cmd(ap, pmp, &tf, 0, 0, 0); - - /* wait for link to become ready */ - rc = ata_wait_after_reset(link, deadline, check_ready); - if (rc == -EBUSY && hpriv->flags & AHCI_HFLAG_SRST_TOUT_IS_OFFLINE) { - /* - * Workaround for cases where link online status can't - * be trusted. Treat device readiness timeout as link - * offline. - */ - ata_link_printk(link, KERN_INFO, - "device not ready, treating as offline\n"); - *class = ATA_DEV_NONE; - } else if (rc) { - /* link occupied, -ENODEV too is an error */ - reason = "device not ready"; - goto fail; - } else - *class = ahci_dev_classify(ap); - - DPRINTK("EXIT, class=%u\n", *class); - return 0; - - fail: - ata_link_printk(link, KERN_ERR, "softreset failed (%s)\n", reason); - return rc; -} - -static int ahci_check_ready(struct ata_link *link) -{ - void __iomem *port_mmio = ahci_port_base(link->ap); - u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF; - - return ata_check_ready(status); -} - -static int ahci_softreset(struct ata_link *link, unsigned int *class, - unsigned long deadline) -{ - int pmp = sata_srst_pmp(link); - - DPRINTK("ENTER\n"); - - return ahci_do_softreset(link, class, pmp, deadline, ahci_check_ready); -} - -static int ahci_sb600_check_ready(struct ata_link *link) -{ - void __iomem *port_mmio = ahci_port_base(link->ap); - u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF; - u32 irq_status = readl(port_mmio + PORT_IRQ_STAT); - - /* - * There is no need to check TFDATA if BAD PMP is found due to HW bug, - * which can save timeout delay. - */ - if (irq_status & PORT_IRQ_BAD_PMP) - return -EIO; - - return ata_check_ready(status); -} - -static int ahci_sb600_softreset(struct ata_link *link, unsigned int *class, - unsigned long deadline) -{ - struct ata_port *ap = link->ap; - void __iomem *port_mmio = ahci_port_base(ap); - int pmp = sata_srst_pmp(link); - int rc; - u32 irq_sts; - - DPRINTK("ENTER\n"); - - rc = ahci_do_softreset(link, class, pmp, deadline, - ahci_sb600_check_ready); - - /* - * Soft reset fails on some ATI chips with IPMS set when PMP - * is enabled but SATA HDD/ODD is connected to SATA port, - * do soft reset again to port 0. - */ - if (rc == -EIO) { - irq_sts = readl(port_mmio + PORT_IRQ_STAT); - if (irq_sts & PORT_IRQ_BAD_PMP) { - ata_link_printk(link, KERN_WARNING, - "applying SB600 PMP SRST workaround " - "and retrying\n"); - rc = ahci_do_softreset(link, class, 0, deadline, - ahci_check_ready); - } - } - - return rc; -} - -static int ahci_hardreset(struct ata_link *link, unsigned int *class, - unsigned long deadline) -{ - const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context); - struct ata_port *ap = link->ap; - struct ahci_port_priv *pp = ap->private_data; - u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG; - struct ata_taskfile tf; - bool online; - int rc; - - DPRINTK("ENTER\n"); - - ahci_stop_engine(ap); - - /* clear D2H reception area to properly wait for D2H FIS */ - ata_tf_init(link->device, &tf); - tf.command = 0x80; - ata_tf_to_fis(&tf, 0, 0, d2h_fis); - - rc = sata_link_hardreset(link, timing, deadline, &online, - ahci_check_ready); - - ahci_start_engine(ap); - - if (online) - *class = ahci_dev_classify(ap); - - DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class); - return rc; -} - -static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class, - unsigned long deadline) -{ - struct ata_port *ap = link->ap; - bool online; - int rc; - - DPRINTK("ENTER\n"); - - ahci_stop_engine(ap); - - rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context), - deadline, &online, NULL); - - ahci_start_engine(ap); - - DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class); - - /* vt8251 doesn't clear BSY on signature FIS reception, - * request follow-up softreset. - */ - return online ? -EAGAIN : rc; -} - -static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class, - unsigned long deadline) -{ - struct ata_port *ap = link->ap; - struct ahci_port_priv *pp = ap->private_data; - u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG; - struct ata_taskfile tf; - bool online; - int rc; - - ahci_stop_engine(ap); - - /* clear D2H reception area to properly wait for D2H FIS */ - ata_tf_init(link->device, &tf); - tf.command = 0x80; - ata_tf_to_fis(&tf, 0, 0, d2h_fis); - - rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context), - deadline, &online, NULL); - - ahci_start_engine(ap); - - /* The pseudo configuration device on SIMG4726 attached to - * ASUS P5W-DH Deluxe doesn't send signature FIS after - * hardreset if no device is attached to the first downstream - * port && the pseudo device locks up on SRST w/ PMP==0. To - * work around this, wait for !BSY only briefly. If BSY isn't - * cleared, perform CLO and proceed to IDENTIFY (achieved by - * ATA_LFLAG_NO_SRST and ATA_LFLAG_ASSUME_ATA). - * - * Wait for two seconds. Devices attached to downstream port - * which can't process the following IDENTIFY after this will - * have to be reset again. For most cases, this should - * suffice while making probing snappish enough. - */ - if (online) { - rc = ata_wait_after_reset(link, jiffies + 2 * HZ, - ahci_check_ready); - if (rc) - ahci_kick_engine(ap); - } - return rc; -} - -static void ahci_postreset(struct ata_link *link, unsigned int *class) -{ - struct ata_port *ap = link->ap; - void __iomem *port_mmio = ahci_port_base(ap); - u32 new_tmp, tmp; - - ata_std_postreset(link, class); - - /* Make sure port's ATAPI bit is set appropriately */ - new_tmp = tmp = readl(port_mmio + PORT_CMD); - if (*class == ATA_DEV_ATAPI) - new_tmp |= PORT_CMD_ATAPI; - else - new_tmp &= ~PORT_CMD_ATAPI; - if (new_tmp != tmp) { - writel(new_tmp, port_mmio + PORT_CMD); - readl(port_mmio + PORT_CMD); /* flush */ - } -} - -static unsigned int ahci_fill_sg(struct ata_queued_cmd *qc, void *cmd_tbl) -{ - struct scatterlist *sg; - struct ahci_sg *ahci_sg = cmd_tbl + AHCI_CMD_TBL_HDR_SZ; - unsigned int si; - - VPRINTK("ENTER\n"); - - /* - * Next, the S/G list. - */ - for_each_sg(qc->sg, sg, qc->n_elem, si) { - dma_addr_t addr = sg_dma_address(sg); - u32 sg_len = sg_dma_len(sg); - - ahci_sg[si].addr = cpu_to_le32(addr & 0xffffffff); - ahci_sg[si].addr_hi = cpu_to_le32((addr >> 16) >> 16); - ahci_sg[si].flags_size = cpu_to_le32(sg_len - 1); - } - - return si; -} - -static int ahci_pmp_qc_defer(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - struct ahci_port_priv *pp = ap->private_data; - - if (!sata_pmp_attached(ap) || pp->fbs_enabled) - return ata_std_qc_defer(qc); - else - return sata_pmp_qc_defer_cmd_switch(qc); -} - -static void ahci_qc_prep(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - struct ahci_port_priv *pp = ap->private_data; - int is_atapi = ata_is_atapi(qc->tf.protocol); - void *cmd_tbl; - u32 opts; - const u32 cmd_fis_len = 5; /* five dwords */ - unsigned int n_elem; - - /* - * Fill in command table information. First, the header, - * a SATA Register - Host to Device command FIS. - */ - cmd_tbl = pp->cmd_tbl + qc->tag * AHCI_CMD_TBL_SZ; - - ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, cmd_tbl); - if (is_atapi) { - memset(cmd_tbl + AHCI_CMD_TBL_CDB, 0, 32); - memcpy(cmd_tbl + AHCI_CMD_TBL_CDB, qc->cdb, qc->dev->cdb_len); - } - - n_elem = 0; - if (qc->flags & ATA_QCFLAG_DMAMAP) - n_elem = ahci_fill_sg(qc, cmd_tbl); - - /* - * Fill in command slot information. - */ - opts = cmd_fis_len | n_elem << 16 | (qc->dev->link->pmp << 12); - if (qc->tf.flags & ATA_TFLAG_WRITE) - opts |= AHCI_CMD_WRITE; - if (is_atapi) - opts |= AHCI_CMD_ATAPI | AHCI_CMD_PREFETCH; - - ahci_fill_cmd_slot(pp, qc->tag, opts); -} - -static void ahci_fbs_dec_intr(struct ata_port *ap) -{ - struct ahci_port_priv *pp = ap->private_data; - void __iomem *port_mmio = ahci_port_base(ap); - u32 fbs = readl(port_mmio + PORT_FBS); - int retries = 3; - - DPRINTK("ENTER\n"); - BUG_ON(!pp->fbs_enabled); - - /* time to wait for DEC is not specified by AHCI spec, - * add a retry loop for safety. - */ - writel(fbs | PORT_FBS_DEC, port_mmio + PORT_FBS); - fbs = readl(port_mmio + PORT_FBS); - while ((fbs & PORT_FBS_DEC) && retries--) { - udelay(1); - fbs = readl(port_mmio + PORT_FBS); - } - - if (fbs & PORT_FBS_DEC) - dev_printk(KERN_ERR, ap->host->dev, - "failed to clear device error\n"); -} - -static void ahci_error_intr(struct ata_port *ap, u32 irq_stat) -{ - struct ahci_host_priv *hpriv = ap->host->private_data; - struct ahci_port_priv *pp = ap->private_data; - struct ata_eh_info *host_ehi = &ap->link.eh_info; - struct ata_link *link = NULL; - struct ata_queued_cmd *active_qc; - struct ata_eh_info *active_ehi; - bool fbs_need_dec = false; - u32 serror; - - /* determine active link with error */ - if (pp->fbs_enabled) { - void __iomem *port_mmio = ahci_port_base(ap); - u32 fbs = readl(port_mmio + PORT_FBS); - int pmp = fbs >> PORT_FBS_DWE_OFFSET; - - if ((fbs & PORT_FBS_SDE) && (pmp < ap->nr_pmp_links) && - ata_link_online(&ap->pmp_link[pmp])) { - link = &ap->pmp_link[pmp]; - fbs_need_dec = true; - } - - } else - ata_for_each_link(link, ap, EDGE) - if (ata_link_active(link)) - break; - - if (!link) - link = &ap->link; - - active_qc = ata_qc_from_tag(ap, link->active_tag); - active_ehi = &link->eh_info; - - /* record irq stat */ - ata_ehi_clear_desc(host_ehi); - ata_ehi_push_desc(host_ehi, "irq_stat 0x%08x", irq_stat); - - /* AHCI needs SError cleared; otherwise, it might lock up */ - ahci_scr_read(&ap->link, SCR_ERROR, &serror); - ahci_scr_write(&ap->link, SCR_ERROR, serror); - host_ehi->serror |= serror; - - /* some controllers set IRQ_IF_ERR on device errors, ignore it */ - if (hpriv->flags & AHCI_HFLAG_IGN_IRQ_IF_ERR) - irq_stat &= ~PORT_IRQ_IF_ERR; - - if (irq_stat & PORT_IRQ_TF_ERR) { - /* If qc is active, charge it; otherwise, the active - * link. There's no active qc on NCQ errors. It will - * be determined by EH by reading log page 10h. - */ - if (active_qc) - active_qc->err_mask |= AC_ERR_DEV; - else - active_ehi->err_mask |= AC_ERR_DEV; - - if (hpriv->flags & AHCI_HFLAG_IGN_SERR_INTERNAL) - host_ehi->serror &= ~SERR_INTERNAL; - } - - if (irq_stat & PORT_IRQ_UNK_FIS) { - u32 *unk = (u32 *)(pp->rx_fis + RX_FIS_UNK); - - active_ehi->err_mask |= AC_ERR_HSM; - active_ehi->action |= ATA_EH_RESET; - ata_ehi_push_desc(active_ehi, - "unknown FIS %08x %08x %08x %08x" , - unk[0], unk[1], unk[2], unk[3]); - } - - if (sata_pmp_attached(ap) && (irq_stat & PORT_IRQ_BAD_PMP)) { - active_ehi->err_mask |= AC_ERR_HSM; - active_ehi->action |= ATA_EH_RESET; - ata_ehi_push_desc(active_ehi, "incorrect PMP"); - } - - if (irq_stat & (PORT_IRQ_HBUS_ERR | PORT_IRQ_HBUS_DATA_ERR)) { - host_ehi->err_mask |= AC_ERR_HOST_BUS; - host_ehi->action |= ATA_EH_RESET; - ata_ehi_push_desc(host_ehi, "host bus error"); - } - - if (irq_stat & PORT_IRQ_IF_ERR) { - if (fbs_need_dec) - active_ehi->err_mask |= AC_ERR_DEV; - else { - host_ehi->err_mask |= AC_ERR_ATA_BUS; - host_ehi->action |= ATA_EH_RESET; - } - - ata_ehi_push_desc(host_ehi, "interface fatal error"); - } - - if (irq_stat & (PORT_IRQ_CONNECT | PORT_IRQ_PHYRDY)) { - ata_ehi_hotplugged(host_ehi); - ata_ehi_push_desc(host_ehi, "%s", - irq_stat & PORT_IRQ_CONNECT ? - "connection status changed" : "PHY RDY changed"); - } - - /* okay, let's hand over to EH */ - - if (irq_stat & PORT_IRQ_FREEZE) - ata_port_freeze(ap); - else if (fbs_need_dec) { - ata_link_abort(link); - ahci_fbs_dec_intr(ap); - } else - ata_port_abort(ap); -} - -static void ahci_port_intr(struct ata_port *ap) -{ - void __iomem *port_mmio = ahci_port_base(ap); - struct ata_eh_info *ehi = &ap->link.eh_info; - struct ahci_port_priv *pp = ap->private_data; - struct ahci_host_priv *hpriv = ap->host->private_data; - int resetting = !!(ap->pflags & ATA_PFLAG_RESETTING); - u32 status, qc_active = 0; - int rc; - - status = readl(port_mmio + PORT_IRQ_STAT); - writel(status, port_mmio + PORT_IRQ_STAT); - - /* ignore BAD_PMP while resetting */ - if (unlikely(resetting)) - status &= ~PORT_IRQ_BAD_PMP; - - /* If we are getting PhyRdy, this is - * just a power state change, we should - * clear out this, plus the PhyRdy/Comm - * Wake bits from Serror - */ - if ((hpriv->flags & AHCI_HFLAG_NO_HOTPLUG) && - (status & PORT_IRQ_PHYRDY)) { - status &= ~PORT_IRQ_PHYRDY; - ahci_scr_write(&ap->link, SCR_ERROR, ((1 << 16) | (1 << 18))); - } - - if (unlikely(status & PORT_IRQ_ERROR)) { - ahci_error_intr(ap, status); - return; - } - - if (status & PORT_IRQ_SDB_FIS) { - /* If SNotification is available, leave notification - * handling to sata_async_notification(). If not, - * emulate it by snooping SDB FIS RX area. - * - * Snooping FIS RX area is probably cheaper than - * poking SNotification but some constrollers which - * implement SNotification, ICH9 for example, don't - * store AN SDB FIS into receive area. - */ - if (hpriv->cap & HOST_CAP_SNTF) - sata_async_notification(ap); - else { - /* If the 'N' bit in word 0 of the FIS is set, - * we just received asynchronous notification. - * Tell libata about it. - * - * Lack of SNotification should not appear in - * ahci 1.2, so the workaround is unnecessary - * when FBS is enabled. - */ - if (pp->fbs_enabled) - WARN_ON_ONCE(1); - else { - const __le32 *f = pp->rx_fis + RX_FIS_SDB; - u32 f0 = le32_to_cpu(f[0]); - if (f0 & (1 << 15)) - sata_async_notification(ap); - } - } - } - - /* pp->active_link is not reliable once FBS is enabled, both - * PORT_SCR_ACT and PORT_CMD_ISSUE should be checked because - * NCQ and non-NCQ commands may be in flight at the same time. - */ - if (pp->fbs_enabled) { - if (ap->qc_active) { - qc_active = readl(port_mmio + PORT_SCR_ACT); - qc_active |= readl(port_mmio + PORT_CMD_ISSUE); - } - } else { - /* pp->active_link is valid iff any command is in flight */ - if (ap->qc_active && pp->active_link->sactive) - qc_active = readl(port_mmio + PORT_SCR_ACT); - else - qc_active = readl(port_mmio + PORT_CMD_ISSUE); - } - - rc = ata_qc_complete_multiple(ap, qc_active); - - /* while resetting, invalid completions are expected */ - if (unlikely(rc < 0 && !resetting)) { - ehi->err_mask |= AC_ERR_HSM; - ehi->action |= ATA_EH_RESET; - ata_port_freeze(ap); - } -} -======= ->>>>>>> FETCH_HEAD /* Marvell */ { PCI_VDEVICE(MARVELL, 0x6145), board_ahci_mv }, /* 6145 */ _ Patches currently in -mm which might be from akpm@linux-foundation.org are origin.patch linux-next.patch linux-next-git-rejects.patch next-remove-localversion.patch i-need-old-gcc.patch include-linux-fsh-complete-hexification-of-fmode_-constants.patch revert-input-wistron_btns-switch-to-using-sparse-keymap-library.patch drivers-i2c-busses-i2c-xiicc-is-borked.patch rtc-davinci-rtc-driver-checkpatch-fixes.patch c2port-fix-device_create-return-value-check-fix.patch drivers-acpi-use-kasprintf-fix.patch arch-arm-include-asm-elfh-forward-declare-the-task-struct.patch cpufreq-ondemand-dont-synchronize-sample-rate-unless-mulitple-cpus-present.patch fs-fscache-object-listc-fix-warning-on-32-bit.patch timer-stats-fix-del_timer_sync-and-try_to_del_timer_sync.patch led-driver-for-the-soekris-net5501-board-checkpatch-fixes.patch bitops-rename-for_each_bit-to-for_each_set_bit-mtd.patch 3x59x-fix-pci-resource-management.patch kernel-schedc-suppress-unused-var-warning.patch frv-duplicate-output_buffer-of-e03-checkpatch-fixes.patch hwmon-driver-for-ti-tmp102-temperature-sensor.patch of-gpio-implement-gpiolib-notifier-hooks-fix.patch of-gpio-implement-gpiolib-notifier-hooks-fix-fix2.patch memcg-oom-notifier-fix.patch delay-accounting-re-implement-c-for-getdelaysc-to-report-information-on-a-target-command-checkpatch-fixes.patch bitops-remove-temporary-for_each_bit.patch reiser4-export-remove_from_page_cache-fix.patch reiser4.patch reiser4-writeback_inodes-implementation-fix.patch reiser4-fixups.patch reiser4-broke.patch slab-leaks3-default-y.patch put_bh-debug.patch getblk-handle-2tb-devices.patch getblk-handle-2tb-devices-fix.patch notify_change-callers-must-hold-i_mutex.patch