+ btrfs-use-larger-zlib-buffer-for-s390-hardware-compression.patch added to -mm tree

+ btrfs-use-larger-zlib-buffer-for-s390-hardware-compression.patch added to -mm tree

[akpm]

The patch titled
     Subject: btrfs: use larger zlib buffer for s390 hardware compression
has been added to the -mm tree.  Its filename is
     btrfs-use-larger-zlib-buffer-for-s390-hardware-compression.patch

This patch should soon appear at
    http://ozlabs.org/~akpm/mmots/broken-out/btrfs-use-larger-zlib-buffer-for-s390-hardware-compression.patch
and later at
    http://ozlabs.org/~akpm/mmotm/broken-out/btrfs-use-larger-zlib-buffer-for-s390-hardware-compression.patch

Before you just go and hit "reply", please:
   a) Consider who else should be cc'ed
   b) Prefer to cc a suitable mailing list as well
   c) Ideally: find the original patch on the mailing list and do a
      reply-to-all to that, adding suitable additional cc's

*** Remember to use Documentation/process/submit-checklist.rst when testing your code ***

The -mm tree is included into linux-next and is updated
there every 3-4 working days

------------------------------------------------------
From: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Subject: btrfs: use larger zlib buffer for s390 hardware compression

In order to benefit from s390 zlib hardware compression support, increase
the btrfs zlib workspace buffer size from 1 to 4 pages (if s390 zlib
hardware support is enabled on the machine).  This brings up to 60% better
performance in hardware on s390 compared to the PAGE_SIZE buffer and much
more compared to the software zlib processing in btrfs.  In case of memory
pressure, fall back to a single page buffer during workspace allocation.

The data compressed with larger input buffers will still conform to zlib
standard and thus can be decompressed also on a systems that uses only
PAGE_SIZE buffer for btrfs zlib.

Link: http://lkml.kernel.org/r/20200108105103.29028-1-zaslonko@linux.ibm.com
Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Eduard Shishkin <edward6@linux.ibm.com>
Cc: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---

 fs/btrfs/compression.c |    2 
 fs/btrfs/zlib.c        |  135 ++++++++++++++++++++++++++++-----------
 2 files changed, 101 insertions(+), 36 deletions(-)

--- a/fs/btrfs/compression.c~btrfs-use-larger-zlib-buffer-for-s390-hardware-compression
+++ a/fs/btrfs/compression.c
@@ -1290,7 +1290,7 @@ int btrfs_decompress_buf2page(const char
 	/* copy bytes from the working buffer into the pages */
 	while (working_bytes > 0) {
 		bytes = min_t(unsigned long, bvec.bv_len,
-				PAGE_SIZE - buf_offset);
+				PAGE_SIZE - (buf_offset % PAGE_SIZE));
 		bytes = min(bytes, working_bytes);
 
 		kaddr = kmap_atomic(bvec.bv_page);
--- a/fs/btrfs/zlib.c~btrfs-use-larger-zlib-buffer-for-s390-hardware-compression
+++ a/fs/btrfs/zlib.c
@@ -20,9 +20,13 @@
 #include <linux/refcount.h>
 #include "compression.h"
 
+/* workspace buffer size for s390 zlib hardware support */
+#define ZLIB_DFLTCC_BUF_SIZE    (4 * PAGE_SIZE)
+
 struct workspace {
 	z_stream strm;
 	char *buf;
+	unsigned int buf_size;
 	struct list_head list;
 	int level;
 };
@@ -61,7 +65,21 @@ struct list_head *zlib_alloc_workspace(u
 			zlib_inflate_workspacesize());
 	workspace->strm.workspace = kvmalloc(workspacesize, GFP_KERNEL);
 	workspace->level = level;
-	workspace->buf = kmalloc(PAGE_SIZE, GFP_KERNEL);
+	workspace->buf = NULL;
+	/*
+	 * In case of s390 zlib hardware support, allocate lager workspace
+	 * buffer. If allocator fails, fall back to a single page buffer.
+	 */
+	if (zlib_deflate_dfltcc_enabled()) {
+		workspace->buf = kmalloc(ZLIB_DFLTCC_BUF_SIZE,
+					 __GFP_NOMEMALLOC | __GFP_NORETRY |
+					 __GFP_NOWARN | GFP_NOIO);
+		workspace->buf_size = ZLIB_DFLTCC_BUF_SIZE;
+	}
+	if (!workspace->buf) {
+		workspace->buf = kmalloc(PAGE_SIZE, GFP_KERNEL);
+		workspace->buf_size = PAGE_SIZE;
+	}
 	if (!workspace->strm.workspace || !workspace->buf)
 		goto fail;
 
@@ -85,6 +103,7 @@ int zlib_compress_pages(struct list_head
 	struct page *in_page = NULL;
 	struct page *out_page = NULL;
 	unsigned long bytes_left;
+	unsigned int in_buf_pages;
 	unsigned long len = *total_out;
 	unsigned long nr_dest_pages = *out_pages;
 	const unsigned long max_out = nr_dest_pages * PAGE_SIZE;
@@ -102,9 +121,6 @@ int zlib_compress_pages(struct list_head
 	workspace->strm.total_in = 0;
 	workspace->strm.total_out = 0;
 
-	in_page = find_get_page(mapping, start >> PAGE_SHIFT);
-	data_in = kmap(in_page);
-
 	out_page = alloc_page(GFP_NOFS | __GFP_HIGHMEM);
 	if (out_page == NULL) {
 		ret = -ENOMEM;
@@ -114,12 +130,51 @@ int zlib_compress_pages(struct list_head
 	pages[0] = out_page;
 	nr_pages = 1;
 
-	workspace->strm.next_in = data_in;
+	workspace->strm.next_in = workspace->buf;
+	workspace->strm.avail_in = 0;
 	workspace->strm.next_out = cpage_out;
 	workspace->strm.avail_out = PAGE_SIZE;
-	workspace->strm.avail_in = min(len, PAGE_SIZE);
 
 	while (workspace->strm.total_in < len) {
+		/*
+		 * Get next input pages and copy the contents to
+		 * the workspace buffer if required.
+		 */
+		if (workspace->strm.avail_in == 0) {
+			bytes_left = len - workspace->strm.total_in;
+			in_buf_pages = min(DIV_ROUND_UP(bytes_left, PAGE_SIZE),
+					   workspace->buf_size / PAGE_SIZE);
+			if (in_buf_pages > 1) {
+				int i;
+
+				for (i = 0; i < in_buf_pages; i++) {
+					if (in_page) {
+						kunmap(in_page);
+						put_page(in_page);
+					}
+					in_page = find_get_page(mapping,
+								start >> PAGE_SHIFT);
+					data_in = kmap(in_page);
+					memcpy(workspace->buf + i * PAGE_SIZE,
+					       data_in, PAGE_SIZE);
+					start += PAGE_SIZE;
+				}
+				workspace->strm.next_in = workspace->buf;
+			} else {
+				if (in_page) {
+					kunmap(in_page);
+					put_page(in_page);
+				}
+				in_page = find_get_page(mapping,
+							start >> PAGE_SHIFT);
+				data_in = kmap(in_page);
+				start += PAGE_SIZE;
+				workspace->strm.next_in = data_in;
+			}
+			workspace->strm.avail_in = min(bytes_left,
+						       (unsigned long) workspace->buf_size);
+		}
+
 		ret = zlib_deflate(&workspace->strm, Z_SYNC_FLUSH);
 		if (ret != Z_OK) {
 			pr_debug("BTRFS: deflate in loop returned %d\n",
@@ -161,33 +216,43 @@ int zlib_compress_pages(struct list_head
 		/* we're all done */
 		if (workspace->strm.total_in >= len)
 			break;
-
-		/* we've read in a full page, get a new one */
-		if (workspace->strm.avail_in == 0) {
-			if (workspace->strm.total_out > max_out)
-				break;
-
-			bytes_left = len - workspace->strm.total_in;
-			kunmap(in_page);
-			put_page(in_page);
-
-			start += PAGE_SIZE;
-			in_page = find_get_page(mapping,
-						start >> PAGE_SHIFT);
-			data_in = kmap(in_page);
-			workspace->strm.avail_in = min(bytes_left,
-							   PAGE_SIZE);
-			workspace->strm.next_in = data_in;
-		}
+		if (workspace->strm.total_out > max_out)
+			break;
 	}
 	workspace->strm.avail_in = 0;
-	ret = zlib_deflate(&workspace->strm, Z_FINISH);
-	zlib_deflateEnd(&workspace->strm);
-
-	if (ret != Z_STREAM_END) {
-		ret = -EIO;
-		goto out;
+	/*
+	 * Call deflate with Z_FINISH flush parameter providing more output
+	 * space but no more input data, until it returns with Z_STREAM_END.
+	 */
+	while (ret != Z_STREAM_END) {
+		ret = zlib_deflate(&workspace->strm, Z_FINISH);
+		if (ret == Z_STREAM_END)
+			break;
+		if (ret != Z_OK && ret != Z_BUF_ERROR) {
+			zlib_deflateEnd(&workspace->strm);
+			ret = -EIO;
+			goto out;
+		} else if (workspace->strm.avail_out == 0) {
+			/* get another page for the stream end */
+			kunmap(out_page);
+			if (nr_pages == nr_dest_pages) {
+				out_page = NULL;
+				ret = -E2BIG;
+				goto out;
+			}
+			out_page = alloc_page(GFP_NOFS | __GFP_HIGHMEM);
+			if (out_page == NULL) {
+				ret = -ENOMEM;
+				goto out;
+			}
+			cpage_out = kmap(out_page);
+			pages[nr_pages] = out_page;
+			nr_pages++;
+			workspace->strm.avail_out = PAGE_SIZE;
+			workspace->strm.next_out = cpage_out;
+		}
 	}
+	zlib_deflateEnd(&workspace->strm);
 
 	if (workspace->strm.total_out >= workspace->strm.total_in) {
 		ret = -E2BIG;
@@ -231,7 +296,7 @@ int zlib_decompress_bio(struct list_head
 
 	workspace->strm.total_out = 0;
 	workspace->strm.next_out = workspace->buf;
-	workspace->strm.avail_out = PAGE_SIZE;
+	workspace->strm.avail_out = workspace->buf_size;
 
 	/* If it's deflate, and it's got no preset dictionary, then
 	   we can tell zlib to skip the adler32 check. */
@@ -270,7 +335,7 @@ int zlib_decompress_bio(struct list_head
 		}
 
 		workspace->strm.next_out = workspace->buf;
-		workspace->strm.avail_out = PAGE_SIZE;
+		workspace->strm.avail_out = workspace->buf_size;
 
 		if (workspace->strm.avail_in == 0) {
 			unsigned long tmp;
@@ -320,7 +385,7 @@ int zlib_decompress(struct list_head *ws
 	workspace->strm.total_in = 0;
 
 	workspace->strm.next_out = workspace->buf;
-	workspace->strm.avail_out = PAGE_SIZE;
+	workspace->strm.avail_out = workspace->buf_size;
 	workspace->strm.total_out = 0;
 	/* If it's deflate, and it's got no preset dictionary, then
 	   we can tell zlib to skip the adler32 check. */
@@ -364,7 +429,7 @@ int zlib_decompress(struct list_head *ws
 			buf_offset = 0;
 
 		bytes = min(PAGE_SIZE - pg_offset,
-			    PAGE_SIZE - buf_offset);
+			    PAGE_SIZE - (buf_offset % PAGE_SIZE));
 		bytes = min(bytes, bytes_left);
 
 		kaddr = kmap_atomic(dest_page);
@@ -375,7 +440,7 @@ int zlib_decompress(struct list_head *ws
 		bytes_left -= bytes;
 next:
 		workspace->strm.next_out = workspace->buf;
-		workspace->strm.avail_out = PAGE_SIZE;
+		workspace->strm.avail_out = workspace->buf_size;
 	}
 
 	if (ret != Z_STREAM_END && bytes_left != 0)
_

Patches currently in -mm which might be from zaslonko@linux.ibm.com are

lib-zlib-add-s390-hardware-support-for-kernel-zlib_deflate.patch
s390-boot-rename-heap_size-due-to-name-collision.patch
lib-zlib-add-s390-hardware-support-for-kernel-zlib_inflate.patch
s390-boot-add-dfltcc=-kernel-command-line-parameter.patch
lib-zlib-add-zlib_deflate_dfltcc_enabled-function.patch
btrfs-use-larger-zlib-buffer-for-s390-hardware-compression.patch