From: akpm@linux-foundation.org
To: hannes@cmpxchg.org, hughd@google.com, iamjoonsoo.kim@lge.com,
mgorman@techsingularity.net, mhocko@kernel.org,
minchan@kernel.org, mm-commits@vger.kernel.org, vbabka@suse.cz,
willy@infradead.org
Subject: [merged] mm-workingset-prepare-the-workingset-detection-infrastructure-for-anon-lru.patch removed from -mm tree
Date: Wed, 12 Aug 2020 14:01:22 -0700 [thread overview]
Message-ID: <20200812210122.VKyyHMKgo%akpm@linux-foundation.org> (raw)
The patch titled
Subject: mm/workingset: prepare the workingset detection infrastructure for anon LRU
has been removed from the -mm tree. Its filename was
mm-workingset-prepare-the-workingset-detection-infrastructure-for-anon-lru.patch
This patch was dropped because it was merged into mainline or a subsystem tree
------------------------------------------------------
From: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Subject: mm/workingset: prepare the workingset detection infrastructure for anon LRU
To prepare the workingset detection for anon LRU, this patch splits
workingset event counters for refault, activate and restore into anon and
file variants, as well as the refaults counter in struct lruvec.
Link: http://lkml.kernel.org/r/1595490560-15117-4-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
include/linux/mmzone.h | 16 +++++++++++-----
mm/memcontrol.c | 16 +++++++++++-----
mm/vmscan.c | 15 ++++++++++-----
mm/vmstat.c | 9 ++++++---
mm/workingset.c | 8 +++++---
5 files changed, 43 insertions(+), 21 deletions(-)
--- a/include/linux/mmzone.h~mm-workingset-prepare-the-workingset-detection-infrastructure-for-anon-lru
+++ a/include/linux/mmzone.h
@@ -173,9 +173,15 @@ enum node_stat_item {
NR_ISOLATED_ANON, /* Temporary isolated pages from anon lru */
NR_ISOLATED_FILE, /* Temporary isolated pages from file lru */
WORKINGSET_NODES,
- WORKINGSET_REFAULT,
- WORKINGSET_ACTIVATE,
- WORKINGSET_RESTORE,
+ WORKINGSET_REFAULT_BASE,
+ WORKINGSET_REFAULT_ANON = WORKINGSET_REFAULT_BASE,
+ WORKINGSET_REFAULT_FILE,
+ WORKINGSET_ACTIVATE_BASE,
+ WORKINGSET_ACTIVATE_ANON = WORKINGSET_ACTIVATE_BASE,
+ WORKINGSET_ACTIVATE_FILE,
+ WORKINGSET_RESTORE_BASE,
+ WORKINGSET_RESTORE_ANON = WORKINGSET_RESTORE_BASE,
+ WORKINGSET_RESTORE_FILE,
WORKINGSET_NODERECLAIM,
NR_ANON_MAPPED, /* Mapped anonymous pages */
NR_FILE_MAPPED, /* pagecache pages mapped into pagetables.
@@ -277,8 +283,8 @@ struct lruvec {
unsigned long file_cost;
/* Non-resident age, driven by LRU movement */
atomic_long_t nonresident_age;
- /* Refaults at the time of last reclaim cycle */
- unsigned long refaults;
+ /* Refaults at the time of last reclaim cycle, anon=0, file=1 */
+ unsigned long refaults[2];
/* Various lruvec state flags (enum lruvec_flags) */
unsigned long flags;
#ifdef CONFIG_MEMCG
--- a/mm/memcontrol.c~mm-workingset-prepare-the-workingset-detection-infrastructure-for-anon-lru
+++ a/mm/memcontrol.c
@@ -1530,12 +1530,18 @@ static char *memory_stat_format(struct m
seq_buf_printf(&s, "%s %lu\n", vm_event_name(PGMAJFAULT),
memcg_events(memcg, PGMAJFAULT));
- seq_buf_printf(&s, "workingset_refault %lu\n",
- memcg_page_state(memcg, WORKINGSET_REFAULT));
- seq_buf_printf(&s, "workingset_activate %lu\n",
- memcg_page_state(memcg, WORKINGSET_ACTIVATE));
+ seq_buf_printf(&s, "workingset_refault_anon %lu\n",
+ memcg_page_state(memcg, WORKINGSET_REFAULT_ANON));
+ seq_buf_printf(&s, "workingset_refault_file %lu\n",
+ memcg_page_state(memcg, WORKINGSET_REFAULT_FILE));
+ seq_buf_printf(&s, "workingset_activate_anon %lu\n",
+ memcg_page_state(memcg, WORKINGSET_ACTIVATE_ANON));
+ seq_buf_printf(&s, "workingset_activate_file %lu\n",
+ memcg_page_state(memcg, WORKINGSET_ACTIVATE_FILE));
seq_buf_printf(&s, "workingset_restore %lu\n",
- memcg_page_state(memcg, WORKINGSET_RESTORE));
+ memcg_page_state(memcg, WORKINGSET_RESTORE_ANON));
+ seq_buf_printf(&s, "workingset_restore %lu\n",
+ memcg_page_state(memcg, WORKINGSET_RESTORE_FILE));
seq_buf_printf(&s, "workingset_nodereclaim %lu\n",
memcg_page_state(memcg, WORKINGSET_NODERECLAIM));
--- a/mm/vmscan.c~mm-workingset-prepare-the-workingset-detection-infrastructure-for-anon-lru
+++ a/mm/vmscan.c
@@ -2683,7 +2683,10 @@ again:
if (!sc->force_deactivate) {
unsigned long refaults;
- if (inactive_is_low(target_lruvec, LRU_INACTIVE_ANON))
+ refaults = lruvec_page_state(target_lruvec,
+ WORKINGSET_ACTIVATE_ANON);
+ if (refaults != target_lruvec->refaults[0] ||
+ inactive_is_low(target_lruvec, LRU_INACTIVE_ANON))
sc->may_deactivate |= DEACTIVATE_ANON;
else
sc->may_deactivate &= ~DEACTIVATE_ANON;
@@ -2694,8 +2697,8 @@ again:
* rid of any stale active pages quickly.
*/
refaults = lruvec_page_state(target_lruvec,
- WORKINGSET_ACTIVATE);
- if (refaults != target_lruvec->refaults ||
+ WORKINGSET_ACTIVATE_FILE);
+ if (refaults != target_lruvec->refaults[1] ||
inactive_is_low(target_lruvec, LRU_INACTIVE_FILE))
sc->may_deactivate |= DEACTIVATE_FILE;
else
@@ -2972,8 +2975,10 @@ static void snapshot_refaults(struct mem
unsigned long refaults;
target_lruvec = mem_cgroup_lruvec(target_memcg, pgdat);
- refaults = lruvec_page_state(target_lruvec, WORKINGSET_ACTIVATE);
- target_lruvec->refaults = refaults;
+ refaults = lruvec_page_state(target_lruvec, WORKINGSET_ACTIVATE_ANON);
+ target_lruvec->refaults[0] = refaults;
+ refaults = lruvec_page_state(target_lruvec, WORKINGSET_ACTIVATE_FILE);
+ target_lruvec->refaults[1] = refaults;
}
/*
--- a/mm/vmstat.c~mm-workingset-prepare-the-workingset-detection-infrastructure-for-anon-lru
+++ a/mm/vmstat.c
@@ -1167,9 +1167,12 @@ const char * const vmstat_text[] = {
"nr_isolated_anon",
"nr_isolated_file",
"workingset_nodes",
- "workingset_refault",
- "workingset_activate",
- "workingset_restore",
+ "workingset_refault_anon",
+ "workingset_refault_file",
+ "workingset_activate_anon",
+ "workingset_activate_file",
+ "workingset_restore_anon",
+ "workingset_restore_file",
"workingset_nodereclaim",
"nr_anon_pages",
"nr_mapped",
--- a/mm/workingset.c~mm-workingset-prepare-the-workingset-detection-infrastructure-for-anon-lru
+++ a/mm/workingset.c
@@ -6,6 +6,7 @@
*/
#include <linux/memcontrol.h>
+#include <linux/mm_inline.h>
#include <linux/writeback.h>
#include <linux/shmem_fs.h>
#include <linux/pagemap.h>
@@ -280,6 +281,7 @@ void *workingset_eviction(struct page *p
*/
void workingset_refault(struct page *page, void *shadow)
{
+ bool file = page_is_file_lru(page);
struct mem_cgroup *eviction_memcg;
struct lruvec *eviction_lruvec;
unsigned long refault_distance;
@@ -346,7 +348,7 @@ void workingset_refault(struct page *pag
memcg = page_memcg(page);
lruvec = mem_cgroup_lruvec(memcg, pgdat);
- inc_lruvec_state(lruvec, WORKINGSET_REFAULT);
+ inc_lruvec_state(lruvec, WORKINGSET_REFAULT_BASE + file);
/*
* Compare the distance to the existing workingset size. We
@@ -366,7 +368,7 @@ void workingset_refault(struct page *pag
SetPageActive(page);
workingset_age_nonresident(lruvec, hpage_nr_pages(page));
- inc_lruvec_state(lruvec, WORKINGSET_ACTIVATE);
+ inc_lruvec_state(lruvec, WORKINGSET_ACTIVATE_BASE + file);
/* Page was active prior to eviction */
if (workingset) {
@@ -375,7 +377,7 @@ void workingset_refault(struct page *pag
spin_lock_irq(&page_pgdat(page)->lru_lock);
lru_note_cost_page(page);
spin_unlock_irq(&page_pgdat(page)->lru_lock);
- inc_lruvec_state(lruvec, WORKINGSET_RESTORE);
+ inc_lruvec_state(lruvec, WORKINGSET_RESTORE_BASE + file);
}
out:
rcu_read_unlock();
_
Patches currently in -mm which might be from iamjoonsoo.kim@lge.com are
mm-memory-failure-remove-a-wrapper-for-alloc_migration_target.patch
mm-memory_hotplug-remove-a-wrapper-for-alloc_migration_target.patch
reply other threads:[~2020-08-12 21:01 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200812210122.VKyyHMKgo%akpm@linux-foundation.org \
--to=akpm@linux-foundation.org \
--cc=hannes@cmpxchg.org \
--cc=hughd@google.com \
--cc=iamjoonsoo.kim@lge.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mgorman@techsingularity.net \
--cc=mhocko@kernel.org \
--cc=minchan@kernel.org \
--cc=mm-commits@vger.kernel.org \
--cc=vbabka@suse.cz \
--cc=willy@infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).