[patch 077/192] mm/memcg: move mod_objcg_state() to memcontrol.c

[Andrew Morton <akpm@linux-foundation.org>]

From: Waiman Long <longman@redhat.com>
Subject: mm/memcg: move mod_objcg_state() to memcontrol.c

Patch series "mm/memcg: Reduce kmemcache memory accounting overhead", v6.

With the recent introduction of the new slab memory controller, we
eliminate the need for having separate kmemcaches for each memory cgroup
and reduce overall kernel memory usage.  However, we also add additional
memory accounting overhead to each call of kmem_cache_alloc() and
kmem_cache_free().

For workloads that require a lot of kmemcache allocations and
de-allocations, they may experience performance regression as illustrated
in [1] and [2].

A simple kernel module that performs repeated loop of 100,000,000
kmem_cache_alloc() and kmem_cache_free() of either a small 32-byte object
or a big 4k object at module init time with a batch size of 4 (4 kmalloc's
followed by 4 kfree's) is used for benchmarking.  The benchmarking tool
was run on a kernel based on linux-next-20210419.  The test was run on a
CascadeLake server with turbo-boosting disable to reduce run-to-run
variation.

The small object test exercises mainly the object stock charging and
vmstat update code paths.  The large object test also exercises the
refill_obj_stock() and __memcg_kmem_charge()/__memcg_kmem_uncharge() code
paths.

With memory accounting disabled, the run time was 3.130s with both small
object big object tests.

With memory accounting enabled, both cgroup v1 and v2 showed similar
results in the small object test.  The performance results of the large
object test, however, differed between cgroup v1 and v2.

The execution times with the application of various patches in the
patchset were:

  Applied patches   Run time   Accounting overhead   %age 1   %age 2
  ---------------   --------   -------------------   ------   ------

  Small 32-byte object:
       None          11.634s         8.504s          100.0%   271.7%
        1-2           9.425s         6.295s           74.0%   201.1%
        1-3           9.708s         6.578s           77.4%   210.2%
        1-4           8.062s         4.932s           58.0%   157.6%

  Large 4k object (v2):
       None          22.107s        18.977s          100.0%   606.3%
        1-2          20.960s        17.830s           94.0%   569.6%
        1-3          14.238s        11.108s           58.5%   354.9%
        1-4          11.329s         8.199s           43.2%   261.9%

  Large 4k object (v1):
       None          36.807s        33.677s          100.0%  1075.9%
        1-2          36.648s        33.518s           99.5%  1070.9%
        1-3          22.345s        19.215s           57.1%   613.9%
        1-4          18.662s        15.532s           46.1%   496.2%

  N.B. %age 1 = overhead/unpatched overhead
       %age 2 = overhead/accounting disabled time

Patch 2 (vmstat data stock caching) helps in both the small object test
and the large v2 object test. It doesn't help much in v1 big object test.

Patch 3 (refill_obj_stock improvement) does help the small object test
but offer significant performance improvement for the large object test
(both v1 and v2).

Patch 4 (eliminating irq disable/enable) helps in all test cases.

To test for the extreme case, a multi-threaded kmalloc/kfree
microbenchmark was run on the 2-socket 48-core 96-thread system with
96 testing threads in the same memcg doing kmalloc+kfree of a 4k object
with accounting enabled for 10s. The total number of kmalloc+kfree done
in kilo operations per second (kops/s) were as follows:

  Applied patches   v1 kops/s   v1 change   v2 kops/s   v2 change
  ---------------   ---------   ---------   ---------   ---------
       None           3,520        1.00X      6,242        1.00X
        1-2           4,304        1.22X      8,478        1.36X
        1-3           4,731        1.34X    418,142       66.99X
        1-4           4,587        1.30X    438,838       70.30X

With memory accounting disabled, the kmalloc/kfree rate was 1,481,291
kop/s. This test shows how significant the memory accouting overhead
can be in some extreme situations.

For this multithreaded test, the improvement from patch 2 mainly
comes from the conditional atomic xchg of objcg->nr_charged_bytes in
mod_objcg_state(). By using an unconditional xchg, the operation rates
were similar to the unpatched kernel.

Patch 3 elminates the single highly contended cacheline of
objcg->nr_charged_bytes for cgroup v2 leading to a huge performance
improvement. Cgroup v1, however, still has another highly contended
cacheline in the shared page counter &memcg->kmem. So the improvement
is only modest.

Patch 4 helps in cgroup v2, but performs worse in cgroup v1 as
eliminating the irq_disable/irq_enable overhead seems to aggravate the
cacheline contention.

[1] https://lore.kernel.org/linux-mm/20210408193948.vfktg3azh2wrt56t@gabell/T/#u
[2] https://lore.kernel.org/lkml/20210114025151.GA22932@xsang-OptiPlex-9020/


This patch (of 4):

mod_objcg_state() is moved from mm/slab.h to mm/memcontrol.c so that
further optimization can be done to it in later patches without exposing
unnecessary details to other mm components.

Link: https://lkml.kernel.org/r/20210506150007.16288-1-longman@redhat.com
Link: https://lkml.kernel.org/r/20210506150007.16288-2-longman@redhat.com
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Chris Down <chris@chrisdown.name>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Masayoshi Mizuma <msys.mizuma@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---

 mm/memcontrol.c |   13 +++++++++++++
 mm/slab.h       |   16 ++--------------
 2 files changed, 15 insertions(+), 14 deletions(-)

--- a/mm/memcontrol.c~mm-memcg-move-mod_objcg_state-to-memcontrolc
+++ a/mm/memcontrol.c
@@ -782,6 +782,19 @@ void __mod_lruvec_kmem_state(void *p, en
 	rcu_read_unlock();
 }
 
+void mod_objcg_state(struct obj_cgroup *objcg, struct pglist_data *pgdat,
+		     enum node_stat_item idx, int nr)
+{
+	struct mem_cgroup *memcg;
+	struct lruvec *lruvec;
+
+	rcu_read_lock();
+	memcg = obj_cgroup_memcg(objcg);
+	lruvec = mem_cgroup_lruvec(memcg, pgdat);
+	mod_memcg_lruvec_state(lruvec, idx, nr);
+	rcu_read_unlock();
+}
+
 /**
  * __count_memcg_events - account VM events in a cgroup
  * @memcg: the memory cgroup
--- a/mm/slab.h~mm-memcg-move-mod_objcg_state-to-memcontrolc
+++ a/mm/slab.h
@@ -240,6 +240,8 @@ static inline bool kmem_cache_debug_flag
 #ifdef CONFIG_MEMCG_KMEM
 int memcg_alloc_page_obj_cgroups(struct page *page, struct kmem_cache *s,
 				 gfp_t gfp, bool new_page);
+void mod_objcg_state(struct obj_cgroup *objcg, struct pglist_data *pgdat,
+		     enum node_stat_item idx, int nr);
 
 static inline void memcg_free_page_obj_cgroups(struct page *page)
 {
@@ -284,20 +286,6 @@ static inline bool memcg_slab_pre_alloc_
 	return true;
 }
 
-static inline void mod_objcg_state(struct obj_cgroup *objcg,
-				   struct pglist_data *pgdat,
-				   enum node_stat_item idx, int nr)
-{
-	struct mem_cgroup *memcg;
-	struct lruvec *lruvec;
-
-	rcu_read_lock();
-	memcg = obj_cgroup_memcg(objcg);
-	lruvec = mem_cgroup_lruvec(memcg, pgdat);
-	mod_memcg_lruvec_state(lruvec, idx, nr);
-	rcu_read_unlock();
-}
-
 static inline void memcg_slab_post_alloc_hook(struct kmem_cache *s,
 					      struct obj_cgroup *objcg,
 					      gfp_t flags, size_t size,
_