Re: [RFC PATCH net-next v5 0/9] net/smc: Introduce SMC-D-based OS internal communication acceleration

[Wen Gu <guwen@linux.alibaba.com>]

Hi Wenjia & Jan:

Does this version work fine on your platform?

And any comments on this version? :)


Best regards,
Wen Gu


On 2023/4/23 20:17, Wen Gu wrote:

> Hi, all
> 
> # Background
> 
> The background and previous discussion can be referred from [1]~[3].
> 
> We found SMC-D can be used to accelerate OS internal communication, such as
> loopback or between two containers within the same OS instance. So this patch
> set provides a kind of SMC-D dummy device (we call it the SMC-D loopback device)
> to emulate an ISM device, so that SMC-D can also be used on architectures
> other than s390. The SMC-D loopback device are designed as a system global
> device, visible to all containers.
> 
> # Design
> 
> This patch set basically follows the design of the previous version.
> 
> Patch #1/9 ~ #3/9 attempt to decouple ISM-related structures from the SMC-D
> generalized code and extract some helpers to make SMC-D protocol compatible
> with devices other than s390 ISM device.
> 
> Patch #4/9 introduces a kind of loopback device, which is defined as SMC-Dv2
> device and designed to provide communication between SMC sockets on the same
> OS instance.
> 
>   +-------------------------------------------+
>   |  +--------------+       +--------------+  |
>   |  | SMC socket A |       | SMC socket B |  |
>   |  +--------------+       +--------------+  |
>   |       ^                         ^         |
>   |       |    +----------------+   |         |
>   |       |    |   SMC stack    |   |         |
>   |       +--->| +------------+ |<--|         |
>   |            | |   dummy    | |             |
>   |            | |   device   | |             |
>   |            +-+------------+-+             |
>   |                   OS                      |
>   +-------------------------------------------+
> 
> Patch #5/9 ~ #8/9 expand SMC-D protocol interface (smcd_ops) for scenarios where
> SMC-D is used to communicate within VM (loopback here) or between VMs on the same
> host (based on virtio-ism device, see [4]). What these scenarios have in common
> is that the local sndbuf and peer RMB can be mapped to same physical memory region,
> so the data copy between the local sndbuf and peer RMB can be omitted. Performance
> improvement brought by this extension can be found in # Benchmark Test.
> 
>   +----------+                     +----------+
>   | socket A |                     | socket B |
>   +----------+                     +----------+
>         |                               ^
>         |         +---------+           |
>    regard as      |         | ----------|
>    local sndbuf   |  B's    |     regard as
>         |         |  RMB    |     local RMB
>         |-------> |         |
>                   +---------+
> 
> Patch #9/9 realizes the support of loopback device for the above-mentioned expanded
> SMC-D protocol interface.
> 
> # Benchmark Test
> 
>   * Test environments:
>        - VM with Intel Xeon Platinum 8 core 2.50GHz, 16 GiB mem.
>        - SMC sndbuf/RMB size 1MB.
> 
>   * Test object:
>        - TCP lo: run on TCP loopback.
>        - domain: run on UNIX domain.
>        - SMC lo: run on SMC loopback device with patch #1/9 ~ #4/9.
>        - SMC lo-nocpy: run on SMC loopback device with patch #1/9 ~ #9/9.
> 
> 1. ipc-benchmark (see [5])
> 
>   - ./<foo> -c 1000000 -s 100
> 
>                      TCP-lo              domain              SMC-lo          SMC-lo-nocpy
> Message
> rate (msg/s)         79025      115736(+46.45%)    146760(+85.71%)       149800(+89.56%)
> 
> 2. sockperf
> 
>   - serv: <smc_run> taskset -c <cpu> sockperf sr --tcp
>   - clnt: <smc_run> taskset -c <cpu> sockperf { tp | pp } --tcp --msg-size={ 64000 for tp | 14 for pp } -i 127.0.0.1 -t 30
> 
>                      TCP-lo                  SMC-lo             SMC-lo-nocpy
> Bandwidth(MBps)   4822.388        4940.918(+2.56%)         8086.67(+67.69%)
> Latency(us)          6.298          3.352(-46.78%)            3.35(-46.81%)
> 
> 3. iperf3
> 
>   - serv: <smc_run> taskset -c <cpu> iperf3 -s
>   - clnt: <smc_run> taskset -c <cpu> iperf3 -c 127.0.0.1 -t 15
> 
>                      TCP-lo                  SMC-lo             SMC-lo-nocpy
> Bitrate(Gb/s)         40.7            40.5(-0.49%)            72.4(+77.89%)
> 
> 4. nginx/wrk
> 
>   - serv: <smc_run> nginx
>   - clnt: <smc_run> wrk -t 8 -c 500 -d 30 http://127.0.0.1:80
> 
>                      TCP-lo                  SMC-lo             SMC-lo-nocpy
> Requests/s       155994.57      214544.79(+37.53%)       215538.55(+38.17%)
> 
> 
> v5->v4
>   1. The loopback device generates SEID in the same way as the ISM devices when coexisting
>      with ISM devices and uses a default fixed SEID in other cases.
>   2. Ensure each DMB token of the same loopback device is unique.
>   3. Fixe a crash caused by setting smcd_ops->signal_event interface to NULL.
>   4. Fixe a compilation warning complained by kernel test rebot.
> 
> v4->v3
>   1. Rebase to the latest net-next;
>   2. Introduce SEID helper. SMC-D loopback will return SMCD_DEFAULT_V2_SEID. And if it
>      coexist with ISM device, the SEID of ISM device will overwrite SMCD_DEFAULT_V2_SEID
>      as smc_ism_v2_system_eid.
>   3. Won't remove dmb_node from hashtable until no sndbuf attaching to it.
> 
>   Something postponed in this version
>   1. Hierarchy perference of SMC-D devices when loopback and ISM devices coexist, which
>      will be determinated after comparing the performance of loopback and ISM.
> 
> v3->v2
>   1. Adapt new generalized interface provided by [2];
>   2. Select loopback device through SMC-D v2 protocol;
>   3. Split the loopback-related implementation and generic implementation into different
>      patches more reasonably.
> 
> v1->v2
>   1. Fix some build WARNINGs complained by kernel test rebot
>      Reported-by: kernel test robot <lkp@intel.com>
>   2. Add iperf3 test data.
> 
> 
> [1] https://lore.kernel.org/netdev/1671506505-104676-1-git-send-email-guwen@linux.alibaba.com/
> [2] https://lore.kernel.org/netdev/1676477905-88043-1-git-send-email-guwen@linux.alibaba.com/
> [3] https://lore.kernel.org/netdev/1679887699-54797-1-git-send-email-guwen@linux.alibaba.com/
> [4] https://lore.kernel.org/all/20230209033056.96657-1-xuanzhuo@linux.alibaba.com/
> [5] https://github.com/goldsborough/ipc-bench
> 
> 
> 
> Wen Gu (9):
>    net/smc: Decouple ism_dev from SMC-D device dump
>    net/smc: Decouple ism_dev from SMC-D DMB registration
>    net/smc: Extract v2 check helper from SMC-D device registration
>    net/smc: Introduce SMC-D loopback device
>    net/smc: Introduce an interface for getting DMB attribute
>    net/smc: Introudce interfaces for DMB attach and detach
>    net/smc: Avoid data copy from sndbuf to peer RMB in SMC-D
>    net/smc: Modify cursor update logic when using mappable DMB
>    net/smc: Add interface implementation of loopback device
> 
>   drivers/s390/net/ism_drv.c |   5 +-
>   include/net/smc.h          |  18 +-
>   net/smc/Makefile           |   2 +-
>   net/smc/af_smc.c           |  26 ++-
>   net/smc/smc_cdc.c          |  59 ++++--
>   net/smc/smc_cdc.h          |   1 +
>   net/smc/smc_core.c         |  70 ++++++-
>   net/smc/smc_core.h         |   1 +
>   net/smc/smc_ism.c          |  79 ++++++--
>   net/smc/smc_ism.h          |   6 +
>   net/smc/smc_loopback.c     | 491 +++++++++++++++++++++++++++++++++++++++++++++
>   net/smc/smc_loopback.h     |  56 ++++++
>   12 files changed, 777 insertions(+), 37 deletions(-)
>   create mode 100644 net/smc/smc_loopback.c
>   create mode 100644 net/smc/smc_loopback.h
>