From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jeff Kirsher Subject: [net-next 02/10] 3c*/acenic/typhoon: Move 3Com Ethernet drivers Date: Wed, 10 Aug 2011 20:27:50 -0700 Message-ID: <1313033278-7337-3-git-send-email-jeffrey.t.kirsher@intel.com> References: <1313033278-7337-1-git-send-email-jeffrey.t.kirsher@intel.com> Cc: Jeff Kirsher , netdev@vger.kernel.org, gospo@tredhat.com, sassmann@redhat.com, Steffen Klassert , David Dillow , Jes Sorensen , Alan Cox , David Hinds To: davem@davemloft.net Return-path: Received: from mga11.intel.com ([192.55.52.93]:13952 "EHLO mga11.intel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754101Ab1HKD2D (ORCPT ); Wed, 10 Aug 2011 23:28:03 -0400 In-Reply-To: <1313033278-7337-1-git-send-email-jeffrey.t.kirsher@intel.com> Sender: netdev-owner@vger.kernel.org List-ID: Moves the 3Com drivers into drivers/net/ethernet/3com/ and the necessary Kconfig and Makefile changes. Did not move the following drivers becuase they use a non-3Com chipset: 3c503, 3c505, 3c507, 3c523 and 3c527 CC: Steffen Klassert CC: David Dillow CC: Jes Sorensen CC: Alan Cox CC: David Hinds Signed-off-by: Jeff Kirsher Acked-by: David Dillow --- MAINTAINERS | 6 +- drivers/net/Kconfig | 138 ++------------------- drivers/net/Makefile | 7 +- drivers/net/{ => ethernet/3com}/3c501.c | 0 drivers/net/{ => ethernet/3com}/3c501.h | 0 drivers/net/{ => ethernet/3com}/3c509.c | 0 drivers/net/{ => ethernet/3com}/3c515.c | 0 drivers/net/{pcmcia => ethernet/3com}/3c574_cs.c | 0 drivers/net/{pcmcia => ethernet/3com}/3c589_cs.c | 0 drivers/net/{ => ethernet/3com}/3c59x.c | 0 drivers/net/ethernet/3com/Kconfig | 147 ++++++++++++++++++++++ drivers/net/ethernet/3com/Makefile | 12 ++ drivers/net/{ => ethernet/3com}/acenic.c | 0 drivers/net/{ => ethernet/3com}/acenic.h | 0 drivers/net/{ => ethernet/3com}/typhoon.c | 0 drivers/net/{ => ethernet/3com}/typhoon.h | 0 drivers/net/ethernet/Kconfig | 2 + drivers/net/ethernet/Makefile | 2 + drivers/net/pcmcia/Kconfig | 18 --- drivers/net/pcmcia/Makefile | 2 - 20 files changed, 176 insertions(+), 158 deletions(-) rename drivers/net/{ => ethernet/3com}/3c501.c (100%) rename drivers/net/{ => ethernet/3com}/3c501.h (100%) rename drivers/net/{ => ethernet/3com}/3c509.c (100%) rename drivers/net/{ => ethernet/3com}/3c515.c (100%) rename drivers/net/{pcmcia => ethernet/3com}/3c574_cs.c (100%) rename drivers/net/{pcmcia => ethernet/3com}/3c589_cs.c (100%) rename drivers/net/{ => ethernet/3com}/3c59x.c (100%) create mode 100644 drivers/net/ethernet/3com/Kconfig create mode 100644 drivers/net/ethernet/3com/Makefile rename drivers/net/{ => ethernet/3com}/acenic.c (100%) rename drivers/net/{ => ethernet/3com}/acenic.h (100%) rename drivers/net/{ => ethernet/3com}/typhoon.c (100%) rename drivers/net/{ => ethernet/3com}/typhoon.h (100%) diff --git a/MAINTAINERS b/MAINTAINERS index 51d42fb..112e226 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -124,13 +124,13 @@ M: Steffen Klassert L: netdev@vger.kernel.org S: Maintained F: Documentation/networking/vortex.txt -F: drivers/net/3c59x.c +F: drivers/net/ethernet/3com/3c59x.c 3CR990 NETWORK DRIVER M: David Dillow L: netdev@vger.kernel.org S: Maintained -F: drivers/net/typhoon* +F: drivers/net/ethernet/3com/typhoon* 3WARE SAS/SATA-RAID SCSI DRIVERS (3W-XXXX, 3W-9XXX, 3W-SAS) M: Adam Radford @@ -214,7 +214,7 @@ ACENIC DRIVER M: Jes Sorensen L: linux-acenic@sunsite.dk S: Maintained -F: drivers/net/acenic* +F: drivers/net/ethernet/3com/acenic* ACER ASPIRE ONE TEMPERATURE AND FAN DRIVER M: Peter Feuerer diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 5b95796..0b3ea21 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -616,38 +616,11 @@ config SUNVNET help Support for virtual network devices under Sun Logical Domains. -config NET_VENDOR_3COM - bool "3COM cards" - depends on ISA || EISA || MCA || PCI - help - If you have a network (Ethernet) card belonging to this class, say Y - and read the Ethernet-HOWTO, available from - . - - Note that the answer to this question doesn't directly affect the - kernel: saying N will just cause the configurator to skip all - the questions about 3COM cards. If you say Y, you will be asked for - your specific card in the following questions. - -config EL1 - tristate "3c501 \"EtherLink\" support" - depends on NET_VENDOR_3COM && ISA - ---help--- - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - . Also, consider buying a - new card, since the 3c501 is slow, broken, and obsolete: you will - have problems. Some people suggest to ping ("man ping") a nearby - machine every minute ("man cron") when using this card. - - To compile this driver as a module, choose M here. The module - will be called 3c501. - config EL2 tristate "3c503 \"EtherLink II\" support" - depends on NET_VENDOR_3COM && ISA + depends on ISA select CRC32 - help + ---help--- If you have a network (Ethernet) card of this type, say Y and read the Ethernet-HOWTO, available from . @@ -657,7 +630,7 @@ config EL2 config ELPLUS tristate "3c505 \"EtherLink Plus\" support" - depends on NET_VENDOR_3COM && ISA && ISA_DMA_API + depends on ISA && ISA_DMA_API ---help--- Information about this network (Ethernet) card can be found in . If you have a card of @@ -669,8 +642,8 @@ config ELPLUS config EL16 tristate "3c507 \"EtherLink 16\" support (EXPERIMENTAL)" - depends on NET_VENDOR_3COM && ISA && EXPERIMENTAL - help + depends on ISA && EXPERIMENTAL + ---help--- If you have a network (Ethernet) card of this type, say Y and read the Ethernet-HOWTO, available from . @@ -678,36 +651,10 @@ config EL16 To compile this driver as a module, choose M here. The module will be called 3c507. -config EL3 - tristate "3c509/3c529 (MCA)/3c579 \"EtherLink III\" support" - depends on NET_VENDOR_3COM && (ISA || EISA || MCA) - ---help--- - If you have a network (Ethernet) card belonging to the 3Com - EtherLinkIII series, say Y and read the Ethernet-HOWTO, available - from . - - If your card is not working you may need to use the DOS - setup disk to disable Plug & Play mode, and to select the default - media type. - - To compile this driver as a module, choose M here. The module - will be called 3c509. - -config 3C515 - tristate "3c515 ISA \"Fast EtherLink\"" - depends on NET_VENDOR_3COM && (ISA || EISA) && ISA_DMA_API - help - If you have a 3Com ISA EtherLink XL "Corkscrew" 3c515 Fast Ethernet - network card, say Y and read the Ethernet-HOWTO, available from - . - - To compile this driver as a module, choose M here. The module - will be called 3c515. - config ELMC tristate "3c523 \"EtherLink/MC\" support" - depends on NET_VENDOR_3COM && MCA_LEGACY - help + depends on MCA_LEGACY + ---help--- If you have a network (Ethernet) card of this type, say Y and read the Ethernet-HOWTO, available from . @@ -717,54 +664,14 @@ config ELMC config ELMC_II tristate "3c527 \"EtherLink/MC 32\" support (EXPERIMENTAL)" - depends on NET_VENDOR_3COM && MCA && MCA_LEGACY - help - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - . - - To compile this driver as a module, choose M here. The module - will be called 3c527. - -config VORTEX - tristate "3c590/3c900 series (592/595/597) \"Vortex/Boomerang\" support" - depends on NET_VENDOR_3COM && (PCI || EISA) - select MII - ---help--- - This option enables driver support for a large number of 10Mbps and - 10/100Mbps EISA, PCI and PCMCIA 3Com network cards: - - "Vortex" (Fast EtherLink 3c590/3c592/3c595/3c597) EISA and PCI - "Boomerang" (EtherLink XL 3c900 or 3c905) PCI - "Cyclone" (3c540/3c900/3c905/3c980/3c575/3c656) PCI and Cardbus - "Tornado" (3c905) PCI - "Hurricane" (3c555/3cSOHO) PCI - - If you have such a card, say Y and read the Ethernet-HOWTO, - available from . More - specific information is in - and in the comments at - the beginning of . - - To compile this support as a module, choose M here. - -config TYPHOON - tristate "3cr990 series \"Typhoon\" support" - depends on NET_VENDOR_3COM && PCI - select CRC32 + depends on MCA && MCA_LEGACY ---help--- - This option enables driver support for the 3cr990 series of cards: - - 3C990-TX, 3CR990-TX-95, 3CR990-TX-97, 3CR990-FX-95, 3CR990-FX-97, - 3CR990SVR, 3CR990SVR95, 3CR990SVR97, 3CR990-FX-95 Server, - 3CR990-FX-97 Server, 3C990B-TX-M, 3C990BSVR - If you have a network (Ethernet) card of this type, say Y and read the Ethernet-HOWTO, available from . To compile this driver as a module, choose M here. The module - will be called typhoon. + will be called 3c527. config LANCE tristate "AMD LANCE and PCnet (AT1500 and NE2100) support" @@ -2046,33 +1953,6 @@ menuconfig NETDEV_1000 if NETDEV_1000 -config ACENIC - tristate "Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support" - depends on PCI - ---help--- - Say Y here if you have an Alteon AceNIC, 3Com 3C985(B), NetGear - GA620, SGI Gigabit or Farallon PN9000-SX PCI Gigabit Ethernet - adapter. The driver allows for using the Jumbo Frame option (9000 - bytes/frame) however it requires that your switches can handle this - as well. To enable Jumbo Frames, add `mtu 9000' to your ifconfig - line. - - To compile this driver as a module, choose M here: the - module will be called acenic. - -config ACENIC_OMIT_TIGON_I - bool "Omit support for old Tigon I based AceNICs" - depends on ACENIC - help - Say Y here if you only have Tigon II based AceNICs and want to leave - out support for the older Tigon I based cards which are no longer - being sold (ie. the original Alteon AceNIC and 3Com 3C985 (non B - version)). This will reduce the size of the driver object by - app. 100KB. If you are not sure whether your card is a Tigon I or a - Tigon II, say N here. - - The safe and default value for this is N. - config DL2K tristate "DL2000/TC902x-based Gigabit Ethernet support" depends on PCI diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 670b514..d4d6744 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -66,8 +66,6 @@ obj-$(CONFIG_SUNVNET) += sunvnet.o obj-$(CONFIG_MACE) += mace.o obj-$(CONFIG_BMAC) += bmac.o -obj-$(CONFIG_VORTEX) += 3c59x.o -obj-$(CONFIG_TYPHOON) += typhoon.o obj-$(CONFIG_NE2K_PCI) += ne2k-pci.o 8390.o obj-$(CONFIG_PCNET32) += pcnet32.o obj-$(CONFIG_E100) += e100.o @@ -78,7 +76,6 @@ obj-$(CONFIG_SIS190) += sis190.o obj-$(CONFIG_SIS900) += sis900.o obj-$(CONFIG_R6040) += r6040.o obj-$(CONFIG_YELLOWFIN) += yellowfin.o -obj-$(CONFIG_ACENIC) += acenic.o obj-$(CONFIG_ISERIES_VETH) += iseries_veth.o obj-$(CONFIG_NATSEMI) += natsemi.o obj-$(CONFIG_NS83820) += ns83820.o @@ -187,13 +184,10 @@ obj-$(CONFIG_DEFXX) += defxx.o obj-$(CONFIG_SGISEEQ) += sgiseeq.o obj-$(CONFIG_SGI_O2MACE_ETH) += meth.o obj-$(CONFIG_AT1700) += at1700.o -obj-$(CONFIG_EL1) += 3c501.o obj-$(CONFIG_EL16) += 3c507.o obj-$(CONFIG_ELMC) += 3c523.o obj-$(CONFIG_IBMLANA) += ibmlana.o obj-$(CONFIG_ELMC_II) += 3c527.o -obj-$(CONFIG_EL3) += 3c509.o -obj-$(CONFIG_3C515) += 3c515.o obj-$(CONFIG_EEXPRESS) += eexpress.o obj-$(CONFIG_EEXPRESS_PRO) += eepro.o obj-$(CONFIG_8139CP) += 8139cp.o @@ -269,6 +263,7 @@ obj-$(CONFIG_S6GMAC) += s6gmac.o obj-$(CONFIG_ARM) += arm/ obj-$(CONFIG_DEV_APPLETALK) += appletalk/ +obj-$(CONFIG_ETHERNET) += ethernet/ obj-$(CONFIG_TR) += tokenring/ obj-$(CONFIG_WAN) += wan/ obj-$(CONFIG_ARCNET) += arcnet/ diff --git a/drivers/net/3c501.c b/drivers/net/ethernet/3com/3c501.c similarity index 100% rename from drivers/net/3c501.c rename to drivers/net/ethernet/3com/3c501.c diff --git a/drivers/net/3c501.h b/drivers/net/ethernet/3com/3c501.h similarity index 100% rename from drivers/net/3c501.h rename to drivers/net/ethernet/3com/3c501.h diff --git a/drivers/net/3c509.c b/drivers/net/ethernet/3com/3c509.c similarity index 100% rename from drivers/net/3c509.c rename to drivers/net/ethernet/3com/3c509.c diff --git a/drivers/net/3c515.c b/drivers/net/ethernet/3com/3c515.c similarity index 100% rename from drivers/net/3c515.c rename to drivers/net/ethernet/3com/3c515.c diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/ethernet/3com/3c574_cs.c similarity index 100% rename from drivers/net/pcmcia/3c574_cs.c rename to drivers/net/ethernet/3com/3c574_cs.c diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/ethernet/3com/3c589_cs.c similarity index 100% rename from drivers/net/pcmcia/3c589_cs.c rename to drivers/net/ethernet/3com/3c589_cs.c diff --git a/drivers/net/3c59x.c b/drivers/net/ethernet/3com/3c59x.c similarity index 100% rename from drivers/net/3c59x.c rename to drivers/net/ethernet/3com/3c59x.c diff --git a/drivers/net/ethernet/3com/Kconfig b/drivers/net/ethernet/3com/Kconfig new file mode 100644 index 0000000..497f038 --- /dev/null +++ b/drivers/net/ethernet/3com/Kconfig @@ -0,0 +1,147 @@ +# +# 3Com Ethernet device configuration +# + +config NET_VENDOR_3COM + bool "3Com devices" + depends on ISA || EISA || MCA || PCI || PCMCIA + ---help--- + If you have a network (Ethernet) card belonging to this class, say Y + and read the Ethernet-HOWTO, available from + . + + Note that the answer to this question doesn't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about 3Com cards. If you say Y, you will be asked for + your specific card in the following questions. + +if NET_VENDOR_3COM + +config EL1 + tristate "3c501 \"EtherLink\" support" + depends on ISA + ---help--- + If you have a network (Ethernet) card of this type, say Y and read + the Ethernet-HOWTO, available from + . Also, consider buying a + new card, since the 3c501 is slow, broken, and obsolete: you will + have problems. Some people suggest to ping ("man ping") a nearby + machine every minute ("man cron") when using this card. + + To compile this driver as a module, choose M here. The module + will be called 3c501. + +config EL3 + tristate "3c509/3c529 (MCA)/3c579 \"EtherLink III\" support" + depends on (ISA || EISA || MCA) + ---help--- + If you have a network (Ethernet) card belonging to the 3Com + EtherLinkIII series, say Y and read the Ethernet-HOWTO, available + from . + + If your card is not working you may need to use the DOS + setup disk to disable Plug & Play mode, and to select the default + media type. + + To compile this driver as a module, choose M here. The module + will be called 3c509. + +config 3C515 + tristate "3c515 ISA \"Fast EtherLink\"" + depends on (ISA || EISA) && ISA_DMA_API + ---help--- + If you have a 3Com ISA EtherLink XL "Corkscrew" 3c515 Fast Ethernet + network card, say Y and read the Ethernet-HOWTO, available from + . + + To compile this driver as a module, choose M here. The module + will be called 3c515. + +config PCMCIA_3C574 + tristate "3Com 3c574 PCMCIA support" + depends on PCMCIA + ---help--- + Say Y here if you intend to attach a 3Com 3c574 or compatible PCMCIA + (PC-card) Fast Ethernet card to your computer. + + To compile this driver as a module, choose M here: the module will be + called 3c574_cs. If unsure, say N. + +config PCMCIA_3C589 + tristate "3Com 3c589 PCMCIA support" + depends on PCMCIA + ---help--- + Say Y here if you intend to attach a 3Com 3c589 or compatible PCMCIA + (PC-card) Ethernet card to your computer. + + To compile this driver as a module, choose M here: the module will be + called 3c589_cs. If unsure, say N. + +config VORTEX + tristate "3c590/3c900 series (592/595/597) \"Vortex/Boomerang\" support" + depends on (PCI || EISA) + select MII + ---help--- + This option enables driver support for a large number of 10Mbps and + 10/100Mbps EISA, PCI and PCMCIA 3Com network cards: + + "Vortex" (Fast EtherLink 3c590/3c592/3c595/3c597) EISA and PCI + "Boomerang" (EtherLink XL 3c900 or 3c905) PCI + "Cyclone" (3c540/3c900/3c905/3c980/3c575/3c656) PCI and Cardbus + "Tornado" (3c905) PCI + "Hurricane" (3c555/3cSOHO) PCI + + If you have such a card, say Y and read the Ethernet-HOWTO, + available from . More + specific information is in + and in the comments at + the beginning of . + + To compile this support as a module, choose M here. + +config TYPHOON + tristate "3cr990 series \"Typhoon\" support" + depends on PCI + select CRC32 + ---help--- + This option enables driver support for the 3cr990 series of cards: + + 3C990-TX, 3CR990-TX-95, 3CR990-TX-97, 3CR990-FX-95, 3CR990-FX-97, + 3CR990SVR, 3CR990SVR95, 3CR990SVR97, 3CR990-FX-95 Server, + 3CR990-FX-97 Server, 3C990B-TX-M, 3C990BSVR + + If you have a network (Ethernet) card of this type, say Y and read + the Ethernet-HOWTO, available from + . + + To compile this driver as a module, choose M here. The module + will be called typhoon. + +config ACENIC + tristate "Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support" + depends on PCI + ---help--- + Say Y here if you have an Alteon AceNIC, 3Com 3C985(B), NetGear + GA620, SGI Gigabit or Farallon PN9000-SX PCI Gigabit Ethernet + adapter. The driver allows for using the Jumbo Frame option (9000 + bytes/frame) however it requires that your switches can handle this + as well. To enable Jumbo Frames, add `mtu 9000' to your ifconfig + line. + + To compile this driver as a module, choose M here: the + module will be called acenic. + +config ACENIC_OMIT_TIGON_I + bool "Omit support for old Tigon I based AceNICs" + depends on ACENIC + ---help--- + Say Y here if you only have Tigon II based AceNICs and want to leave + out support for the older Tigon I based cards which are no longer + being sold (ie. the original Alteon AceNIC and 3Com 3C985 (non B + version)). This will reduce the size of the driver object by + app. 100KB. If you are not sure whether your card is a Tigon I or a + Tigon II, say N here. + + The safe and default value for this is N. + +endif # NET_VENDOR_3COM diff --git a/drivers/net/ethernet/3com/Makefile b/drivers/net/ethernet/3com/Makefile new file mode 100644 index 0000000..96d1d60 --- /dev/null +++ b/drivers/net/ethernet/3com/Makefile @@ -0,0 +1,12 @@ +# +# Makefile for the 3Com Ethernet device drivers +# + +obj-$(CONFIG_EL1) += 3c501.o +obj-$(CONFIG_EL3) += 3c509.o +obj-$(CONFIG_3C515) += 3c515.o +obj-$(CONFIG_PCMCIA_3C589) += 3c589_cs.o +obj-$(CONFIG_PCMCIA_3C574) += 3c574_cs.o +obj-$(CONFIG_VORTEX) += 3c59x.o +obj-$(CONFIG_ACENIC) += acenic.o +obj-$(CONFIG_TYPHOON) += typhoon.o diff --git a/drivers/net/acenic.c b/drivers/net/ethernet/3com/acenic.c similarity index 100% rename from drivers/net/acenic.c rename to drivers/net/ethernet/3com/acenic.c diff --git a/drivers/net/acenic.h b/drivers/net/ethernet/3com/acenic.h similarity index 100% rename from drivers/net/acenic.h rename to drivers/net/ethernet/3com/acenic.h diff --git a/drivers/net/typhoon.c b/drivers/net/ethernet/3com/typhoon.c similarity index 100% rename from drivers/net/typhoon.c rename to drivers/net/ethernet/3com/typhoon.c diff --git a/drivers/net/typhoon.h b/drivers/net/ethernet/3com/typhoon.h similarity index 100% rename from drivers/net/typhoon.h rename to drivers/net/ethernet/3com/typhoon.h diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig index d59e4f2..18193ec 100644 --- a/drivers/net/ethernet/Kconfig +++ b/drivers/net/ethernet/Kconfig @@ -11,4 +11,6 @@ menuconfig ETHERNET if ETHERNET +source "drivers/net/ethernet/3com/Kconfig" + endif # ETHERNET diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile index 0d21dda..07766ba 100644 --- a/drivers/net/ethernet/Makefile +++ b/drivers/net/ethernet/Makefile @@ -1,3 +1,5 @@ # # Makefile for the Linux network Ethernet device drivers. # + +obj-$(CONFIG_NET_VENDOR_3COM) += 3com/ diff --git a/drivers/net/pcmcia/Kconfig b/drivers/net/pcmcia/Kconfig index 9b8f793..b67c5ed 100644 --- a/drivers/net/pcmcia/Kconfig +++ b/drivers/net/pcmcia/Kconfig @@ -21,24 +21,6 @@ menuconfig NET_PCMCIA if NET_PCMCIA && PCMCIA -config PCMCIA_3C589 - tristate "3Com 3c589 PCMCIA support" - help - Say Y here if you intend to attach a 3Com 3c589 or compatible PCMCIA - (PC-card) Ethernet card to your computer. - - To compile this driver as a module, choose M here: the module will be - called 3c589_cs. If unsure, say N. - -config PCMCIA_3C574 - tristate "3Com 3c574 PCMCIA support" - help - Say Y here if you intend to attach a 3Com 3c574 or compatible PCMCIA - (PC-card) Fast Ethernet card to your computer. - - To compile this driver as a module, choose M here: the module will be - called 3c574_cs. If unsure, say N. - config PCMCIA_FMVJ18X tristate "Fujitsu FMV-J18x PCMCIA support" select CRC32 diff --git a/drivers/net/pcmcia/Makefile b/drivers/net/pcmcia/Makefile index 87d2d99..2f2ab3b 100644 --- a/drivers/net/pcmcia/Makefile +++ b/drivers/net/pcmcia/Makefile @@ -3,8 +3,6 @@ # # 16-bit client drivers -obj-$(CONFIG_PCMCIA_3C589) += 3c589_cs.o -obj-$(CONFIG_PCMCIA_3C574) += 3c574_cs.o obj-$(CONFIG_PCMCIA_FMVJ18X) += fmvj18x_cs.o obj-$(CONFIG_PCMCIA_NMCLAN) += nmclan_cs.o obj-$(CONFIG_PCMCIA_PCNET) += pcnet_cs.o -- 1.7.6