From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jeff Kirsher Subject: [net-next 07/10] eth16i: Move the Allied Telesis/Fujitsu drivers Date: Fri, 12 Aug 2011 00:33:01 -0700 Message-ID: <1313134384-7287-8-git-send-email-jeffrey.t.kirsher@intel.com> References: <1313134384-7287-1-git-send-email-jeffrey.t.kirsher@intel.com> Cc: Jeff Kirsher , netdev@vger.kernel.org, gospo@redhat.com, sassmann@redhat.com, Shingo Fujimoto , Yutaka Tamiya , Rene Schmit , Mika Kuoppala To: davem@davemloft.net Return-path: Received: from mga09.intel.com ([134.134.136.24]:58632 "EHLO mga09.intel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751482Ab1HLHdM (ORCPT ); Fri, 12 Aug 2011 03:33:12 -0400 In-Reply-To: <1313134384-7287-1-git-send-email-jeffrey.t.kirsher@intel.com> Sender: netdev-owner@vger.kernel.org List-ID: Move the Allied Telesis/Fujitsu drivers into drivers/net/ethernet/fujitsu/ and make the necessary Kconfig and Makefile changes. CC: Shingo Fujimoto CC: Yutaka Tamiya CC: Rene Schmit CC: Mika Kuoppala Signed-off-by: Jeff Kirsher --- MAINTAINERS | 2 +- drivers/net/Kconfig | 40 --------------- drivers/net/Makefile | 3 - drivers/net/ethernet/Kconfig | 1 + drivers/net/ethernet/Makefile | 1 + drivers/net/ethernet/fujitsu/Kconfig | 53 ++++++++++++++++++++ drivers/net/ethernet/fujitsu/Makefile | 7 +++ drivers/net/{ => ethernet/fujitsu}/at1700.c | 0 drivers/net/{ => ethernet/fujitsu}/eth16i.c | 0 .../net/{pcmcia => ethernet/fujitsu}/fmvj18x_cs.c | 0 drivers/net/pcmcia/Kconfig | 10 ---- drivers/net/pcmcia/Makefile | 1 - 12 files changed, 63 insertions(+), 55 deletions(-) create mode 100644 drivers/net/ethernet/fujitsu/Kconfig create mode 100644 drivers/net/ethernet/fujitsu/Makefile rename drivers/net/{ => ethernet/fujitsu}/at1700.c (100%) rename drivers/net/{ => ethernet/fujitsu}/eth16i.c (100%) rename drivers/net/{pcmcia => ethernet/fujitsu}/fmvj18x_cs.c (100%) diff --git a/MAINTAINERS b/MAINTAINERS index 51d9281..5b2ad6c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2525,7 +2525,7 @@ F: net/bridge/ ETHERTEAM 16I DRIVER M: Mika Kuoppala S: Maintained -F: drivers/net/eth16i.c +F: drivers/net/ethernet/fujitsu/eth16i.c EXT2 FILE SYSTEM M: Jan Kara diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index c1e491a..27f97b4e 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -428,18 +428,6 @@ config DNET To compile this driver as a module, choose M here: the module will be called dnet. -config AT1700 - tristate "AT1700/1720 support (EXPERIMENTAL)" - depends on (ISA || MCA_LEGACY) && EXPERIMENTAL - select CRC32 - ---help--- - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - . - - To compile this driver as a module, choose M here. The module - will be called at1700. - config HP100 tristate "HP 10/100VG PCLAN (ISA, EISA, PCI) support" depends on ISA || EISA || PCI @@ -451,34 +439,6 @@ config HP100 To compile this driver as a module, choose M here. The module will be called hp100. -config NET_ISA - bool "Other ISA cards" - depends on ISA - ---help--- - If your network (Ethernet) card hasn't been mentioned yet and its - bus system (that's the way the cards talks to the other components - of your computer) is ISA (as opposed to EISA, VLB or PCI), say Y. - Make sure you know the name of your card. Read the Ethernet-HOWTO, - available from . - - If unsure, say Y. - - Note that the answer to this question doesn't directly affect the - kernel: saying N will just cause the configurator to skip all - the remaining ISA network card questions. If you say Y, you will be - asked for your specific card in the following questions. - -config ETH16I - tristate "ICL EtherTeam 16i/32 support" - depends on NET_ISA - help - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - . - - To compile this driver as a module, choose M here. The module - will be called eth16i. - config NET_PCI bool "EISA, VLB, PCI and on board controllers" depends on ISA || EISA || PCI diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 7e1128f..07cad1a 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -96,10 +96,7 @@ obj-$(CONFIG_IFB) += ifb.o obj-$(CONFIG_MACVLAN) += macvlan.o obj-$(CONFIG_MACVTAP) += macvtap.o obj-$(CONFIG_DEFXX) += defxx.o -obj-$(CONFIG_AT1700) += at1700.o obj-$(CONFIG_CPMAC) += cpmac.o - -obj-$(CONFIG_ETH16I) += eth16i.o obj-$(CONFIG_EQUALIZER) += eql.o obj-$(CONFIG_KORINA) += korina.o obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig index bdc0df8..d3aff74 100644 --- a/drivers/net/ethernet/Kconfig +++ b/drivers/net/ethernet/Kconfig @@ -24,6 +24,7 @@ source "drivers/net/ethernet/dlink/Kconfig" source "drivers/net/ethernet/emulex/Kconfig" source "drivers/net/ethernet/neterion/Kconfig" source "drivers/net/ethernet/faraday/Kconfig" +source "drivers/net/ethernet/fujitsu/Kconfig" source "drivers/net/ethernet/ibm/Kconfig" source "drivers/net/ethernet/intel/Kconfig" source "drivers/net/ethernet/i825xx/Kconfig" diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile index ac60ac9..b098c5e 100644 --- a/drivers/net/ethernet/Makefile +++ b/drivers/net/ethernet/Makefile @@ -16,6 +16,7 @@ obj-$(CONFIG_NET_VENDOR_DLINK) += dlink/ obj-$(CONFIG_NET_VENDOR_EMULEX) += emulex/ obj-$(CONFIG_NET_VENDOR_EXAR) += neterion/ obj-$(CONFIG_NET_VENDOR_FARADAY) += faraday/ +obj-$(CONFIG_NET_VENDOR_FUJITSU) += fujitsu/ obj-$(CONFIG_NET_VENDOR_IBM) += ibm/ obj-$(CONFIG_NET_VENDOR_INTEL) += intel/ obj-$(CONFIG_NET_VENDOR_I825XX) += i825xx/ diff --git a/drivers/net/ethernet/fujitsu/Kconfig b/drivers/net/ethernet/fujitsu/Kconfig new file mode 100644 index 0000000..2cd968e --- /dev/null +++ b/drivers/net/ethernet/fujitsu/Kconfig @@ -0,0 +1,53 @@ +# +# Fujitsu Network device configuration +# + +config NET_VENDOR_FUJITSU + bool "Fujitsu devices" + depends on ISA || PCMCIA || ((ISA || MCA_LEGACY) && EXPERIMENTAL) + ---help--- + If you have a network (Ethernet) card belonging to this class, say Y + and read the Ethernet-HOWTO, available from + . + + Note that the answer to this question doesn't directly affect the + the questions about Fujitsu cards. If you say Y, you will be asked for + your specific card in the following questions. + +if NET_VENDOR_FUJITSU + +config AT1700 + tristate "AT1700/1720 support (EXPERIMENTAL)" + depends on (ISA || MCA_LEGACY) && EXPERIMENTAL + select CRC32 + ---help--- + If you have a network (Ethernet) card of this type, say Y and read + the Ethernet-HOWTO, available from + . + + To compile this driver as a module, choose M here. The module + will be called at1700. + +config PCMCIA_FMVJ18X + tristate "Fujitsu FMV-J18x PCMCIA support" + depends on PCMCIA + select CRC32 + ---help--- + Say Y here if you intend to attach a Fujitsu FMV-J18x or compatible + PCMCIA (PC-card) Ethernet card to your computer. + + To compile this driver as a module, choose M here: the module will be + called fmvj18x_cs. If unsure, say N. + +config ETH16I + tristate "ICL EtherTeam 16i/32 support" + depends on ISA + ---help--- + If you have a network (Ethernet) card of this type, say Y and read + the Ethernet-HOWTO, available from + . + + To compile this driver as a module, choose M here. The module + will be called eth16i. + +endif # NET_VENDOR_FUJITSU diff --git a/drivers/net/ethernet/fujitsu/Makefile b/drivers/net/ethernet/fujitsu/Makefile new file mode 100644 index 0000000..2730ae6 --- /dev/null +++ b/drivers/net/ethernet/fujitsu/Makefile @@ -0,0 +1,7 @@ +# +# Makefile for the Fujitsu network device drivers. +# + +obj-$(CONFIG_AT1700) += at1700.o +obj-$(CONFIG_ETH16I) += eth16i.o +obj-$(CONFIG_PCMCIA_FMVJ18X) += fmvj18x_cs.o diff --git a/drivers/net/at1700.c b/drivers/net/ethernet/fujitsu/at1700.c similarity index 100% rename from drivers/net/at1700.c rename to drivers/net/ethernet/fujitsu/at1700.c diff --git a/drivers/net/eth16i.c b/drivers/net/ethernet/fujitsu/eth16i.c similarity index 100% rename from drivers/net/eth16i.c rename to drivers/net/ethernet/fujitsu/eth16i.c diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/ethernet/fujitsu/fmvj18x_cs.c similarity index 100% rename from drivers/net/pcmcia/fmvj18x_cs.c rename to drivers/net/ethernet/fujitsu/fmvj18x_cs.c diff --git a/drivers/net/pcmcia/Kconfig b/drivers/net/pcmcia/Kconfig index f5a738f..80d291e 100644 --- a/drivers/net/pcmcia/Kconfig +++ b/drivers/net/pcmcia/Kconfig @@ -21,16 +21,6 @@ menuconfig NET_PCMCIA if NET_PCMCIA && PCMCIA -config PCMCIA_FMVJ18X - tristate "Fujitsu FMV-J18x PCMCIA support" - select CRC32 - help - Say Y here if you intend to attach a Fujitsu FMV-J18x or compatible - PCMCIA (PC-card) Ethernet card to your computer. - - To compile this driver as a module, choose M here: the module will be - called fmvj18x_cs. If unsure, say N. - config PCMCIA_XIRC2PS tristate "Xircom 16-bit PCMCIA support" help diff --git a/drivers/net/pcmcia/Makefile b/drivers/net/pcmcia/Makefile index f9c9883..ccf5535 100644 --- a/drivers/net/pcmcia/Makefile +++ b/drivers/net/pcmcia/Makefile @@ -3,7 +3,6 @@ # # 16-bit client drivers -obj-$(CONFIG_PCMCIA_FMVJ18X) += fmvj18x_cs.o obj-$(CONFIG_PCMCIA_XIRC2PS) += xirc2ps_cs.o obj-$(CONFIG_ARCNET_COM20020_CS)+= com20020_cs.o -- 1.7.6